Add sanitizer support for modern iOS platforms
asan and tsan generally support iOS, but that previously wasn't configured in rust. This only adds support for the simulator architectures, and arm64 device architecture, not the older 32 bit architectures.
Add `kernel-address` sanitizer support for freestanding targets
This PR adds support for KASan (kernel address sanitizer) instrumentation in freestanding targets. I included the minimal set of `x86_64-unknown-none`, `riscv64{imac, gc}-unknown-none-elf`, and `aarch64-unknown-none` but there's likely other targets it can be added to. (`linux_kernel_base.rs`?) KASan uses the address sanitizer attributes but has the `CompileKernel` parameter set to `true` in the pass creation.
Default `repr(C)` enums to `c_int` size
This is what ISO C strongly implies this is correct, and
many processor-specific ABIs imply or mandate this size, so
"everyone" (LLVM, gcc...) defaults to emitting enums this way.
However, this is by no means guaranteed by ISO C,
and the bare-metal Arm targets show it can be overridden,
which rustc supports via `c-enum-min-bits` in a target.json.
The override is a flag named `-fshort-enums` in clang and gcc,
but introducing a CLI flag is probably unnecessary for rustc.
This flag can be used by non-Arm microcontroller targets,
like AVR and MSP430, but it is not enabled for them by default.
Rust programmers who know the size of a target's enums
can use explicit reprs, which also lets them match C23 code.
This change is most relevant to 16-bit targets: AVR and MSP430.
Most of rustc's targets use 32-bit ints, but ILP64 does exist.
Regardless, rustc should now correctly handle enums for
both very small and very large targets.
Thanks to William for confirming MSP430 behavior,
and to Waffle for better style and no-core `size_of` asserts.
Fixesrust-lang/rust#107361Fixesrust-lang/rust#77806
This is what ISO C strongly implies this is correct, and
many processor-specific ABIs imply or mandate this size, so
"everyone" (LLVM, gcc...) defaults to emitting enums this way.
However, this is by no means guaranteed by ISO C,
and the bare-metal Arm targets show it can be overridden,
which rustc supports via `c-enum-min-bits` in a target.json.
The override is a flag named `-fshort-enums` in clang and gcc,
but introducing a CLI flag is probably unnecessary for rustc.
This flag can be used by non-Arm microcontroller targets,
like AVR and MSP430, but it is not enabled for them by default.
Rust programmers who know the size of a target's enums
can use explicit reprs, which also lets them match C23 code.
This change is most relevant to 16-bit targets: AVR and MSP430.
Most of rustc's targets use 32-bit ints, but ILP64 does exist.
Regardless, rustc should now correctly handle enums for
both very small and very large targets.
Thanks to William for confirming MSP430 behavior,
and to Waffle for better style and no-core size_of asserts.
Co-authored-by: William D. Jones <thor0505@comcast.net>
Co-authored-by: Waffle Maybe <waffle.lapkin@gmail.com>
asan and tsan generally support iOS, but that previously wasn't
configured in rust. This only adds support for the simulator
architectures, and arm64 device architecture, not the older 32 bit
architectures.
Specify where XRay is supported. I only test ARM64 and x86_64, but hey
those others should work too, right? LLVM documentation says that MIPS
and PPC are also supported, but I don't have the hardware, so I won't
pretend. Naturally, more targets can be added later with more testing.
Remove hardcoded iOS version of clang target for Mac Catalyst
## Background
From `clang` 13.x, `-target x86_64-apple-ios13.0-macabi` fails while linking:
```
= note: clang: error: invalid version number in '-target x86_64-apple-ios13.0-macabi'
```
<details>
<summary>Verbose output</summary>
```
error: linking with `cc` failed: exit status: 1
|
= note: LC_ALL="C" PATH="[removed]" VSLANG="1033" ZERO_AR_DATE="1" "cc" "-Wl,-exported_symbols_list,/var/folders/p8/qpmzbsdn07g5gxykwfxxw7y40000gn/T/rustci8tkvp/list" "-target" "x86_64-apple-ios13.0-macabi" "/var/folders/p8/qpmzbsdn07g5gxykwfxxw7y40000gn/T/rustci8tkvp/symbols.o" "/path/to/my/[project]/[user]/target/x86_64-apple-ios-macabi/release/deps/[user].[user].a2ccc648-cgu.0.rcgu.o" "-L" "/path/to/my/[project]/[user]/target/x86_64-apple-ios-macabi/release/deps" "-L" "/path/to/my/[project]/[user]/target/release/deps" "-L" "/path/to/my/[project]/[user]/target/x86_64-apple-ios-macabi/release/build/blake3-74e6ba91506ce712/out" "-L" "/path/to/my/[project]/[user]/target/x86_64-apple-ios-macabi/release/build/blake3-74e6ba91506ce712/out" "-L" "/Users/[user]/.rustup/toolchains/nightly-aarch64-apple-darwin/lib/rustlib/x86_64-apple-ios-macabi/lib" "/var/folders/p8/qpmzbsdn07g5gxykwfxxw7y40000gn/T/rustci8tkvp/libblake3-343c1616c8f62c66.rlib" "/path/to/my/[project]/[user]/target/x86_64-apple-ios-macabi/release/deps/libcompiler_builtins-15d4f20b641cf9ef.rlib" "-framework" "Security" "-framework" "CoreFoundation" "-framework" "Security" "-liconv" "-lSystem" "-lobjc" "-framework" "Security" "-framework" "Foundation" "-lc" "-lm" "-isysroot" "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.1.sdk" "-Wl,-syslibroot" "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX13.1.sdk" "-L" "/Users/[user]/.rustup/toolchains/nightly-aarch64-apple-darwin/lib/rustlib/x86_64-apple-ios-macabi/lib" "-o" "/path/to/my/[project]/[user]/target/x86_64-apple-ios-macabi/release/deps/lib[user].dylib" "-Wl,-dead_strip" "-dynamiclib" "-Wl,-dylib" "-nodefaultlibs"
= note: clang: error: invalid version number in '-target x86_64-apple-ios13.0-macabi'
warning: `[user]` (lib) generated 6 warnings
error: could not compile `[user]` due to previous error; 6 warnings emitted
```
</details>
### Minimal example
C code:
```c
#include <stdio.h>
void main() {
int a = 1;
int b = 2;
int c = a + b;
printf("%d", c);
}
```
`clang` command sample:
```
➜ 202301 clang -target x86_64-apple-ios13.0-macabi main.c
clang: error: invalid version number in '-target x86_64-apple-ios13.0-macabi'
➜ 202301 clang -target x86_64-apple-ios14.0-macabi main.c
main.c:2:1: warning: return type of 'main' is not 'int' [-Wmain-return-type]
void main() {
^
main.c:2:1: note: change return type to 'int'
void main() {
^~~~
int
1 warning generated.
➜ 202301 clang -target x86_64-apple-ios15.0-macabi main.c
main.c:2:1: warning: return type of 'main' is not 'int' [-Wmain-return-type]
void main() {
^
main.c:2:1: note: change return type to 'int'
void main() {
^~~~
int
1 warning generated.
➜ 202301 clang -target x86_64-apple-ios-macabi main.c
main.c:2:1: warning: return type of 'main' is not 'int' [-Wmain-return-type]
void main() {
^
main.c:2:1: note: change return type to 'int'
void main() {
^~~~
int
1 warning generated.
➜ 202301 clang --version
Apple clang version 14.0.0 (clang-1400.0.29.202)
Target: arm64-apple-darwin22.2.0
Thread model: posix
InstalledDir: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
```
This PR is a simplified version of #96392, inspired by https://github.com/rust-lang/cc-rs/pull/727
abi: add AddressSpace field to Primitive::Pointer
...and remove it from `PointeeInfo`, which isn't meant for this.
There are still various places (marked with FIXMEs) that assume all pointers
have the same size and alignment. Fixing this requires parsing non-default
address spaces in the data layout string (and various other changes),
which will be done in a followup.
(That is, if it's actually worth it to support multiple different pointer sizes.
There is a lot of code that would be affected by that.)
Fixes#106367
r? ``@oli-obk``
cc ``@Patryk27``
BPF: Disable atomic CAS
Enabling CAS for BPF targets (https://github.com/rust-lang/rust/pull/105708) breaks the build of core library.
The failure occurs both when building rustc for BPF targets and when
building crates for BPF targets with the current nightly.
The LLVM BPF backend does not correctly lower all `atomicrmw` operations
and crashes for unsupported ones.
Before we can enable CAS for BPF in Rust, we need to fix the LLVM BPF
backend first.
Fixes#106795
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
...and remove it from `PointeeInfo`, which isn't meant for this.
There are still various places (marked with FIXMEs) that assume all pointers
have the same size and alignment. Fixing this requires parsing non-default
address spaces in the data layout string, which will be done in a followup.
there were fixmes for this already
i am about to remove is_ptr (since callers need to properly distinguish
between pointers in different address spaces), so might as well do this
at the same time
Include sanitizers supported by LLVM on s390x (asan, lsan, msan, tsan)
in the target definition, as well as in the compiletest supported list.
Build sanitizer runtime for the target. Enable sanitizers in the CI.
Enabling CAS for BPF targets (#105708) breaks the build of core library.
The failure occurs both when building rustc for BPF targets and when
building crates for BPF targets with the current nightly.
The LLVM BPF backend does not correctly lower all `atomicrmw` operations
and crashes for unsupported ones.
Before we can enable CAS for BPF in Rust, we need to fix the LLVM BPF
backend first.
Fixes#106795
Signed-off-by: Michal Rostecki <vadorovsky@gmail.com>
Accept old spelling of Fuchsia target triples
The old spelling of Fuchsia target triples was changed in #106429 to add a proper vendor. Because the old spelling is widely used, some projects may need time to migrate their uses to the new triple spelling. The old spelling may eventually be removed altogether.
r? ``@tmandry``
Because the old spelling is widely used, some projects may need time to
migrate their uses to the new triple spelling. The old spelling may
eventually be removed altogether.
Enable Shadow Call Stack for Fuchsia on AArch64
Fuchsia already uses SCS by default for C/C++ code on ARM hardware. This patch allows SCS to be used for Rust code as well.
Add vendor to Fuchsia's target triple
Historically, Rust's Fuchsia targets have been labeled x86_64-fuchsia and aarch64-fuchsia. However, they should technically contain vendor information. This CL changes Fuchsia's target triples to include the "unknown" vendor since Clang now does normalization and handles all triple spellings.
This was previously attempted in #90510, which was closed due to inactivity.
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Historically, Rust's Fuchsia targets have been labeled x86_64-fuchsia
and aarch64-fuchsia. However, they should technically contain vendor
information. This CL changes Fuchsia's target triples to include the
"unknown" vendor since Clang now does normalization and handles all
triple spellings.
This was previously attempted in #90510, which was closed due to
inactivity.
Remove the `..` from the body, only a few invocations used it and it's
inconsistent with rust syntax.
Use `;` instead of `,` between consts. As the Rust syntax gods inteded.
Add LLVM KCFI support to the Rust compiler
This PR adds LLVM Kernel Control Flow Integrity (KCFI) support to the Rust compiler. It initially provides forward-edge control flow protection for operating systems kernels for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Thank you again, `@bjorn3,` `@eddyb,` `@nagisa,` and `@ojeda,` for all the help!
Mangle "main" as "__main_void" on wasm32-wasi
On wasm, the age-old C trick of having a main function which can either have no arguments or argc+argv doesn't work, because wasm requires caller and callee signatures to match. WASI's current strategy is to have compilers mangle main's name to indicate which signature they're using. Rust uses the no-argument form, which should be mangled as `__main_void`.
This is needed on wasm32-wasi as of #105395.
This commit adds LLVM Kernel Control Flow Integrity (KCFI) support to
the Rust compiler. It initially provides forward-edge control flow
protection for operating systems kernels for Rust-compiled code only by
aggregating function pointers in groups identified by their return and
parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Co-authored-by: bjorn3 <17426603+bjorn3@users.noreply.github.com>
On wasm, the age-old C trick of having a main function which can either have
no arguments or argc+argv doesn't work, because wasm requires caller and
callee signatures to match. WASI's current strategy is to have compilers
mangle main's name to indicate which signature they're using. Rust uses the
no-argument form, which should be mangled as `__main_void`.
This is needed on wasm32-wasi as of #105395.
Stop passing -export-dynamic to wasm-ld.
-export-dynamic was a temporary hack added in the early days of the Rust wasm32 target when Rust didn't have a way to specify wasm exports in the source code. This flag causes all global symbols, and some compiler-internal symbols, to be exported, which is often more than needed.
Rust now does have a way to specify exports in the source code: `#[export_name = "..."]`.
So as the original comment suggests, -export-dynamic can now be removed, allowing users to have smaller binaries and better encapsulation in their wasm32-unknown-unknown modules.
It's possible that this change will require existing wasm32-unknown-unknown users will to add explicit `#[export_name = "..."]` directives to exporrt the symbols that their programs depend on having exported.
-export-dynamic was a temporary hack added in the early days of the Rust
wasm32 target when Rust didn't have a way to specify wasm exports in the
source code. This flag causes all global symbols, and some compiler-internal
symbols, to be exported, which is often more than needed.
Rust now does have a way to specify exports in the source code:
`#[export_name = "..."]`.
So as the original comment suggests, -export-dynamic can now be removed,
allowing users to have smaller binaries and better encapsulation in
their wasm32-unknown-unknown modules.
It's possible that this change will require existing wasm32-unknown-unknown
users will to add explicit `#[export_name = "..."]` directives to
exporrt the symbols that their programs depend on having exported.
Fix passing MACOSX_DEPLOYMENT_TARGET to the linker
I messed up in https://github.com/rust-lang/rust/pull/103929 when merging the two base files together and as a result, started ignoring `MACOSX_DEPLOYMENT_TARGET` at the linker level. This ended up being the cause of nighty builds not running on older macOS versions.
My original hope with the previous PR was that CI would have caught something like that but there were only tests checking the compiler target definitions in codegen tests. Because of how badly this sucks to break, I put together a new test via `run-make` that actually confirms the deployment target set makes it to the linker instead of just LLVM.
Closes https://github.com/rust-lang/rust/issues/104570 (for real this time)
Remove useless borrows and derefs
They are nothing more than noise.
<sub>These are not all of them, but my clippy started crashing (stack overflow), so rip :(</sub>
Improve generating Custom entry function
This commit is aimed at making compiler-generated entry functions (Basically just C `main` right now) more generic so other targets can do similar things for custom entry. This was initially implemented as part of https://github.com/rust-lang/rust/pull/100316.
Currently, this moves the entry function name and Call convention to the target spec.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
[watchos] Dynamic linking is not allowed for watchos targets
Dynamic linking of all apple targets was (re-) enabled in PR #100636. However, dynamic linking is not allowed on WatchOS so this broke the build of standard library for WatchOS.
This change disables dynamic linking for WatchOS non-simulator targets.
Issue error when -C link-self-contained option is used on unsupported platforms
The documentation was also updated to reflect this.
I'm assuming the supported platforms are the same as initially written in [RELEASES.md](https://github.com/rust-lang/rust/blob/master/RELEASES.md#compiler-17).
Fixes#103576
This commit is aimed at making compiler generated entry functions
(Basically just C `main` right now) more generic so other targets can do
similar things for custom entry. This was initially implemented as part
of https://github.com/rust-lang/rust/pull/100316.
Currently, this moves the entry function name and Call convention to the
target spec.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
Cleanup Apple-related code in rustc_target
While working on https://github.com/rust-lang/rust/pull/103455, the consistency of the `rustc_target` code for Apple's platforms was "kind of bad." There were two "base" files (`apple_base.rs` and `apple_sdk_base.rs`) that the targets each pulled some parts out of, each and all of them were written slightly differently, and sometimes missed comments other implementations had.
So to hopefully make future maintenance, like implementing https://github.com/rust-lang/compiler-team/issues/556, easier, this makes all of them use similar patterns and the same target base logic everywhere instead of picking bits from both. This also has some other smaller upsides like less stringly-typed functions.
fix debuginfo for windows_gnullvm_base.rs
These lines (including the FIXME comment) were added to windows_gnu_base.rs in cf2c492ef8 but windows_gnullvm_base.rs was not updated. This resulted in an error `LLVM ERROR: dwo only supported with ELF and Wasm` attempting to build on aarch64-pc-windows-gnullvm.
See also https://github.com/msys2/MINGW-packages/pull/13921#issuecomment-1304391707
/cc ```@mati865``` ```@davidtwco```
r? ```@davidtwco```
These lines (including the FIXME comment) were added to windows_gnu_base.rs in cf2c492ef8 but windows_gnullvm_base.rs was not updated. This resulted in an error `LLVM ERROR: dwo only supported with ELF and Wasm` attempting to build on aarch64-pc-windows-gnullvm.
Signed-off-by: Jeremy Drake <github@jdrake.com>
Fixed consistency of Apple simulator target's ABI
Currently there's a few Apple device simulator targets that are inconsistent since some set `target_abi = "sim"` (the correct thing to do) while a bunch of others don't set anything (`""`). Due to this its very hard to reliability check if some Rust code is running inside a simulator. This changes all of them to do the same thing and set `sim` as their `target_abi`.
The new way to identity a simulator during compilation is as simple as `cfg(all(target_vendor="apple", target_abi = "sim"))` or even `cfg(target_abi = "sim")` being less pedantic about it.
The issues with the current form (and inspiration for this) are also summarized in `@thomcc's` [Tweet](https://twitter.com/at_tcsc/status/1576685244702691328).
Add a tier 3 target for the Sony PlayStation 1
This adds a tier 3 target, `mipsel-sony-psx`, for the Sony PlayStation 1. I've tested it pretty thoroughly with [this SDK](https://github.com/ayrtonm/psx-sdk-rs) I wrote for it.
From the [tier 3 target policy](https://doc.rust-lang.org/rustc/target-tier-policy.html#tier-3-target-policy) (I've omitted the subpoints for brevity, but read over everything)
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I'd be the designated developer
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The target name follows the conventions of the existing PSP target (`mipsel-sony-psp`) and uses `psx` following the convention of the broader [PlayStation homebrew community](https://psx-spx.consoledev.net/).
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
No legal issues with this target.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
👍
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
The psx supports `core` and `alloc`, but will likely not support `std` anytime soon.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
This target has an SDK and a `cargo-psx` tool for formatting binaries as psx executables. Documentation and examples are provided in the [psx-sdk-rs README](https://github.com/ayrtonm/psx-sdk-rs#psx-sdk-rs), the SDK and cargo tool are both available through crates.io and docs.rs has [SDK documentation](https://docs.rs/psx/latest/psx/).
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
👍
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
No problem
This patch makes it possible to use varargs for calling conventions,
which are either based on C (like efiapi) or C is based
on them (for example sysv64 and win64).
Enable inline stack probes on X86 with LLVM 16
The known problems with x86 inline-asm stack probes have been solved on LLVM main (16), so this flips the switch. Anyone using bleeding-edge LLVM with rustc can start testing this, as I have done locally. We'll get more direct rust-ci when LLVM 16 branches and we start our upgrade, and we can always patch or disable it then if we find new problems.
The previous attempt was #77885, reverted in #84708.
LLVM [D131158] changed the SystemZ data layout to always set 64-bit
vector alignment, which used to be conditional on the "vector" feature.
[D131158]: https://reviews.llvm.org/D131158
Rollup of 8 pull requests
Successful merges:
- #100734 (Split out async_fn_in_trait into a separate feature)
- #101664 (Note if mismatched types have a similar name)
- #101815 (Migrated the rustc_passes annotation without effect diagnostic infrastructure)
- #102042 (Distribute rust-docs-json via rustup.)
- #102066 (rustdoc: remove unnecessary `max-width` on headers)
- #102095 (Deduplicate two functions that would soon have been three)
- #102104 (Set 'exec-env:RUST_BACKTRACE=0' in const-eval-select tests)
- #102112 (Allow full relro on powerpc64-unknown-linux-gnu)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Allow full relro on powerpc64-unknown-linux-gnu
This was previously limited to partial relro, citing issues on RHEL6,
but that's no longer a supported platform since #95026. We have long
been enabling full relro in RHEL7's own Rust builds for ppc64, without
trouble, so it should be fine to drop this workaround.
Update rustc's information on Android's sanitizers
This patch updates sanitizer support definitions for Android inside the compiler. It also adjusts the logic to make sure no pre-built sanitizer runtime libraries are emitted as these are instead provided dynamically on Android targets.
This was previously limited to partial relro, citing issues on RHEL6,
but that's no longer a supported platform since #95026. We have long
been enabling full relro in RHEL7's own Rust builds for ppc64, without
trouble, so it should be fine to drop this workaround.
Add armv5te-none-eabi and thumbv5te-none-eabi targets
Creates two new Tier 3 targets, `armv5te-none-eabi` and `thumbv5te-none-eabi`. They are for the same target architecture (armv5te), but one defaults to the A32 instruction set and the other defaults to T32. Based on the existing `armv4t-none-eabi` and `thumbv4t-none-eabi` targets.
My particular use case for these targets is Nintendo DS homebrew, but they should be usable for any armv5te system.
Going through the Tier 3 target policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
That will be me.
> Targets must use naming consistent with any existing targets.
Naming is consistent with previous targets.
>> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility.
No ambiguity here.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Doesn't create any legal issues.
>> The target must not introduce license incompatibilities.
This doesn't introduce any new licenses.
>> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Yep.
>> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
No new license requirements.
>> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries.
Everything this uses is FOSS, no proprietary required.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
OK.
>> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
OK.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This is a bare-metal target with only support for `core` (and `alloc`, if the user provides an allocator).
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation has been added.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
OK.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
OK.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
This doesn't break any other targets.
>> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
No unnecessary unconditional features here.
This patch updates sanitizier support definitions for Android inside the
compiler. It also adjusts the logic to make sure no pre-built sanitizer
runtime libraries are emitted as these are instead provided dynamically
on Android targets.
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Add tier-3 support for powerpc64 and riscv64 openbsd
# powerpc64
- MCP for [powerpc64-unknown-openbsd tier-3 support](https://github.com/rust-lang/compiler-team/issues/551)
- only need to add spec definition in rustc_target
# riscv64
- MCP for [riscv64-unknown-openbsd tier-3 support](https://github.com/rust-lang/compiler-team/issues/552)
- add spec definition in rustc_target
- follow freebsd about avoiding linking with `libatomic`
Set DebuginfoKind::Pdb in msvc_base
This PDB setting was added to `windows_msvc_base` in
https://github.com/rust-lang/rust/pull/98051. It's also needed for the
UEFI targets, and since `uefi_msvc_base` and `windows_msvc_base` are the
only things that inherit from `msvc_base`, just move the PDB setting up
to `mscv_base` to cover both.
Fixes https://github.com/rust-lang/rust/issues/101071
session: stabilize split debuginfo on linux
Stabilize the `-Csplit-debuginfo` flag...
- ...on Linux for all values of the flag. Split DWARF has been implemented for a few months, hasn't had any bug reports and has had some promising benchmarking for incremental debug build performance.
- ..on other platforms for the default value. It doesn't make any sense that `-Csplit-debuginfo=packed` is unstable on Windows MSVC when that's the default behaviour, but keep the other values unstable.
Because `PassMode::Cast` is by far the largest variant, but is
relatively rare.
This requires making `PassMode` not impl `Copy`, and `Clone` is no
longer necessary. This causes lots of sigil adjusting, but nothing very
notable.
Add the armv4t-none-eabi target to the supported_targets
This target was added in #100244 but forgot to add it to the macro in the `mod.rs` file.
``@Lokathor``
