```
error[E0277]: the trait bound `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}: Coroutine` is not satisfied
--> $DIR/gen_block_is_coro.rs:6:13
|
LL | fn foo() -> impl Coroutine<Yield = u32, Return = ()> {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the trait `Coroutine` is not implemented for `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}`
LL | gen { yield 42 }
| ---------------- return type was inferred to be `{gen block@$DIR/gen_block_is_coro.rs:7:5: 7:8}` here
```
The secondary span label is new.
This changes the remaining span for the cast, because the new `Cast`
category has a higher priority (lower `Ord`) than the old `Coercion`
category, so we no longer report the region error for the "unsizing"
coercion from `*const Trait` to itself.
...and remove the `const_arg_path` feature gate as a result. It was only
a stopgap measure to fix the regression that the new lowering introduced
(which should now be fixed by this PR).
Retroactively feature gate `ConstArgKind::Path`
This puts the lowering introduced by #125915 under a feature gate until we fix the regressions introduced by it. Alternative to whole sale reverting the PR since it didn't seem like a very clean revert and I think this is generally a step in the right direction and don't want to get stuck landing and reverting the PR over and over :)
cc #129137 ``@camelid,`` tests taken from there. beta is branching soon so I think it makes sense to not try and rush that fix through since it wont have much time to bake and if it has issues we can't simply revert it on beta.
Fixes#128016
turn `invalid_type_param_default` into a `FutureReleaseErrorReportInDeps`
`````@rust-lang/types````` I assume the plan is still to disallow this? It has been a future-compat lint for a long time, seems ripe to go for hard error.
However, turns out that outright removing it right now would lead to [tons of crater regressions](https://github.com/rust-lang/rust/pull/127655#issuecomment-2228285460), so for now this PR just makes this future-compat lint show up in cargo's reports, so people are warned when they use a dependency that is affected by this.
Fixes https://github.com/rust-lang/rust/issues/27336 by removing the feature gate (so there's no way to silence the lint even on nightly)
CC https://github.com/rust-lang/rust/issues/36887
Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes#112219Fixes#112124Fixes#112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve#120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
Represent type-level consts with new-and-improved `hir::ConstArg`
### Summary
This is a step toward `min_generic_const_exprs`. We now represent all const
generic arguments using an enum that differentiates between const *paths*
(temporarily just bare const params) and arbitrary anon consts that may perform
computations. This will enable us to cleanly implement the `min_generic_const_args`
plan of allowing the use of generics in paths used as const args, while
disallowing their use in arbitrary anon consts. Here is a summary of the salient
aspects of this change:
- Add `current_def_id_parent` to `LoweringContext`
This is needed to track anon const parents properly once we implement
`ConstArgKind::Path` (which requires moving anon const def-creation
outside of `DefCollector`).
- Create `hir::ConstArgKind` enum with `Path` and `Anon` variants. Use it in the
existing `hir::ConstArg` struct, replacing the previous `hir::AnonConst` field.
- Use `ConstArg` for all instances of const args. Specifically, use it instead
of `AnonConst` for assoc item constraints, array lengths, and const param
defaults.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at https://github.com/rust-lang/rust/issues/127009.
### Followup items post-merge
- Use `ConstArgKind::Path` for all const paths, not just const params.
- Fix (no github dont close this issue) #127009
- If a path in generic args doesn't resolve as a type, try to resolve as a const
instead (do this in rustc_resolve). Then remove the special-casing from
`rustc_ast_lowering`, so that all params will automatically be lowered as
`ConstArgKind::Path`.
- (?) Consider making `const_evaluatable_unchecked` a hard error, or at least
trying it in crater
r? `@BoxyUwU`
Fix associated item removal suggestion
We were previously telling people to write what was already there, instead of removal (treating it as a `help`). We now properly suggest to remove the code that needs to be removed.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
We were previously telling people to write what was already there, instead of removal.
```
error[E0229]: associated item constraints are not allowed here
--> $DIR/E0229.rs:13:25
|
LL | fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
| ^^^^^^^ associated item constraint not allowed here
|
help: consider removing this associated item binding
|
LL - fn baz<I>(x: &<I as Foo<A = Bar>>::A) {}
LL + fn baz<I>(x: &<I as Foo>::A) {}
|
```
This is a very large commit since a lot needs to be changed in order to
make the tests pass. The salient changes are:
- `ConstArgKind` gets a new `Path` variant, and all const params are now
represented using it. Non-param paths still use `ConstArgKind::Anon`
to prevent this change from getting too large, but they will soon use
the `Path` variant too.
- `ConstArg` gets a distinct `hir_id` field and its own variant in
`hir::Node`. This affected many parts of the compiler that expected
the parent of an `AnonConst` to be the containing context (e.g., an
array repeat expression). They have been changed to check the
"grandparent" where necessary.
- Some `ast::AnonConst`s now have their `DefId`s created in
rustc_ast_lowering rather than `DefCollector`. This is because in some
cases they will end up becoming a `ConstArgKind::Path` instead, which
has no `DefId`. We have to solve this in a hacky way where we guess
whether the `AnonConst` could end up as a path const since we can't
know for sure until after name resolution (`N` could refer to a free
const or a nullary struct). If it has no chance as being a const
param, then we create a `DefId` in `DefCollector` -- otherwise we
decide during ast_lowering. This will have to be updated once all path
consts use `ConstArgKind::Path`.
- We explicitly use `ConstArgHasType` for array lengths, rather than
implicitly relying on anon const type feeding -- this is due to the
addition of `ConstArgKind::Path`.
- Some tests have their outputs changed, but the changes are for the
most part minor (including removing duplicate or almost-duplicate
errors). One test now ICEs, but it is for an incomplete, unstable
feature and is now tracked at #127009.
the `tail-expr-lock-poisoning` UI test uses the `panic::catch_unwind`
API so it relies on unwinding being implemented. this test ought not to
run on targets that do not support unwinding. add the `needs-unwind`
attribute to signal this
Detect when user is trying to create a lending `Iterator` and give a custom explanation
The scope for this diagnostic is to detect lending iterators specifically and it's main goal is to help beginners to understand that what they are trying to implement might not be possible for `Iterator` trait specifically.
I ended up to changing the wording from originally proposed in the ticket because it might be misleading otherwise: `Data` might have a lifetime parameter but it can be unrelated to items user is planning to return.
Fixes https://github.com/rust-lang/rust/issues/125337
Silence follow-up errors directly based on error types and regions
During type_of, we used to just return an error type if there were any errors encountered. This is problematic, because it means a struct declared as `struct Foo<'static>` will end up not finding any inherent or trait impls because those impl blocks' `Self` type will be `{type error}` instead of `Foo<'re_error>`. Now it's the latter, silencing nonsensical follow-up errors about `Foo` not having any methods.
Unfortunately that now allows for new follow-up errors, because borrowck treats `'re_error` as `'static`, causing nonsensical errors about non-error lifetimes not outliving `'static`. So what I also did was to just strip all outlives bounds that borrowck found, thus never letting it check them. There are probably more nuanced ways to do this, but I worried there would be other nonsensical errors if some outlives bounds were missing. Also from the test changes, it looked like an improvement everywhere.
Use parenthetical notation for `Fn` traits
Always use the `Fn(T) -> R` format when printing closure traits instead of `Fn<(T,), Output = R>`.
Address #67100:
```
error[E0277]: expected a `Fn()` closure, found `F`
--> file.rs:6:13
|
6 | call_fn(f)
| ------- ^ expected an `Fn()` closure, found `F`
| |
| required by a bound introduced by this call
|
= note: wrap the `F` in a closure with no arguments: `|| { /* code */ }`
note: required by a bound in `call_fn`
--> file.rs:1:15
|
1 | fn call_fn<F: Fn() -> ()>(f: &F) {
| ^^^^^^^^^^ required by this bound in `call_fn`
help: consider further restricting this bound
|
5 | fn call_any<F: std::any::Any + Fn()>(f: &F) {
| ++++++
```
Always use the `Fn(T) -> R` format when printing closure traits instead of `Fn<(T,), Output = R>`.
Fix#67100:
```
error[E0277]: expected a `Fn()` closure, found `F`
--> file.rs:6:13
|
6 | call_fn(f)
| ------- ^ expected an `Fn()` closure, found `F`
| |
| required by a bound introduced by this call
|
= note: wrap the `F` in a closure with no arguments: `|| { /* code */ }`
note: required by a bound in `call_fn`
--> file.rs:1:15
|
1 | fn call_fn<F: Fn() -> ()>(f: &F) {
| ^^^^^^^^^^ required by this bound in `call_fn`
help: consider further restricting this bound
|
5 | fn call_any<F: std::any::Any + Fn()>(f: &F) {
| ++++++
```
Do not suggest constraining the `&self` param, but rather the return type.
If that is wrong (because it is not sufficient), a follow up error will tell the
user to fix it. This way we lower the chances of *over* constraining, but still
get the cake of "correctly" contrained in two steps.
This is a correct suggestion:
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-return-type-is-anon.rs:9:9
|
LL | fn foo<'a>(&self, x: &i32) -> &i32 {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | x
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn foo<'a>(&self, x: &'a i32) -> &'a i32 {
| ++ ++
```
While this is incomplete because it should suggestino `&'a self`
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-self-is-anon.rs:7:19
|
LL | fn foo<'a>(&self, x: &Foo) -> &Foo {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | if true { x } else { self }
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn foo<'a>(&self, x: &'a Foo) -> &'a Foo {
| ++ ++
```
but the follow up error is
```
error: lifetime may not live long enough
--> tests/ui/lifetimes/lifetime-errors/ex3-both-anon-regions-self-is-anon.rs:7:30
|
6 | fn foo<'a>(&self, x: &'a Foo) -> &'a Foo {
| -- - let's call the lifetime of this reference `'1`
| |
| lifetime `'a` defined here
7 | if true { x } else { self }
| ^^^^ method was supposed to return data with lifetime `'a` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
6 | fn foo<'a>(&'a self, x: &'a Foo) -> &'a Foo {
| ++
```
```
error: lifetime may not live long enough
--> $DIR/lt-ref-self.rs:12:9
|
LL | fn ref_self(&self, f: &u32) -> &u32 {
| - - let's call the lifetime of this reference `'1`
| |
| let's call the lifetime of this reference `'2`
LL | f
| ^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter and update trait if needed
|
LL | fn ref_self<'b>(&'b self, f: &'b u32) -> &'b u32 {
| ++++ ++ ++ ++
```
```
error: lifetime may not live long enough
--> f205.rs:8:16
|
7 | fn resolve_symbolic_reference(&self, reference: Option<Reference>) -> Option<Reference> {
| - --------- has type `Option<Reference<'1>>`
| |
| let's call the lifetime of this reference `'2`
8 | return reference;
| ^^^^^^^^^ method was supposed to return data with lifetime `'2` but it is returning data with lifetime `'1`
|
help: consider introducing a named lifetime parameter
|
7 | fn resolve_symbolic_reference<'a>(&'a self, reference: Option<Reference<'a>>) -> Option<Reference<'a>> {
| ++++ ++ ++++ ++++
```
The correct suggestion would be
```
help: consider introducing a named lifetime parameter
|
7 | fn resolve_symbolic_reference<'a>(&self, reference: Option<Reference<'a>>) -> Option<Reference<'a>> {
| ++++ ++++ ++++
```
but we are not doing the analysis to detect that yet. If we constrain `&'a self`, then the return type with a borrow will implicitly take its lifetime from `'a`, it is better to make it explicit in the suggestion, in case that `&self` *doesn't* need to be `'a`, but the return does.
```
error: lifetime may not live long enough
--> $DIR/ex3-both-anon-regions-both-are-structs-2.rs:7:5
|
LL | fn foo(mut x: Ref, y: Ref) {
| ----- - has type `Ref<'_, '1>`
| |
| has type `Ref<'_, '2>`
LL | x.b = y.b;
| ^^^^^^^^^ assignment requires that `'1` must outlive `'2`
|
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'a, 'a>, y: Ref<'a, 'a>) {
| ++++ ++++++++ ++++++++
```
As can be seen above, it currently doesn't try to compare the `ty::Ty` lifetimes that diverged vs the `hir::Ty` to correctly suggest the following
```
help: consider introducing a named lifetime parameter
|
LL | fn foo<'a>(mut x: Ref<'_, 'a>, y: Ref<'_, 'a>) {
| ++++ ++++++++ ++++++++
```
but I believe this to still be an improvement over the status quo.
CC #40990.
Suggest using type args directly instead of equality constraint
When type arguments are written erroneously using an equality constraint we suggest specifying them directly without the equality constraint.
Fixes#122162
Changes the diagnostic in the issue from:
```rust
error[E0229]: associated type bindings are not allowed here
9 | impl std::cmp::PartialEq<Rhs = T> for S {
| ^^^^^^^ associated type not allowed here
|
```
to
```rust
error[E0229]: associated type bindings are not allowed here
9 | impl std::cmp::PartialEq<Rhs = T> for S {
| ^^^^^^^ associated type not allowed here
|
help: to use `T` as a generic argument specify it directly
|
| impl std::cmp::PartialEq<T> for S {
| ~
```
Propagate temporary lifetime extension into if and match.
This PR makes this work:
```rust
let a = if true {
..;
&temp() // used to error, but now gets lifetime extended
} else {
..;
&temp() // used to error, but now gets lifetime extended
};
```
and
```rust
let a = match () {
_ => {
..;
&temp() // used to error, but now gets lifetime extended
}
};
```
to make it consistent with:
```rust
let a = {
..;
&temp() // lifetime is extended
};
```
This is one small part of [the temporary lifetimes work](https://github.com/rust-lang/lang-team/issues/253).
This part is backwards compatible (so doesn't need be edition-gated), because all code affected by this change previously resulted in a hard error.
