An automated script was run against the `.rs` and `.md` files,
subsituting every occurrence of `task` with `thread`. In the `.rs`
files, only the texts in the comment blocks were affected.
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
Whenever a type implements Deref, rustdoc will now add a section to the "methods
available" sections for "Methods from Deref<Target=Foo>", listing all the
inherent methods of the type `Foo`.
Closes#19190
This adds support in rustdoc to blanket apply crate attributes to all doc tests
for a crate at once. The syntax for doing this is:
#![doc(test(attr(...)))]
Each meta item in `...` will be applied to each doctest as a crate attribute.
cc #18199
for `Box<FnBox()>`. I found the alias was still handy because it is
shorter than the fully written type.
This is a [breaking-change]: convert code using `Invoke` to use `FnBox`,
which is usually pretty straight-forward. Code using thunk mostly works
if you change `Thunk::new => Box::new` and `foo.invoke(arg)` to
`foo(arg)`.
This commit removes parser support for `extern crate "foo" as bar` as the
renamed crate is now required to be an identifier. Additionally this commit
enables hard errors on crate names that contain hyphens in them, they must now
solely contain alphanumeric characters or underscores.
If the crate name is inferred from the file name, however, the file name
`foo-bar.rs` will have the crate name inferred as `foo_bar`. If a binary is
being emitted it will have the name `foo-bar` and a library will have the name
`libfoo_bar.rlib`.
This commit is a breaking change for a number of reasons:
* Old syntax is being removed. This was previously only issuing warnings.
* The output for the compiler when input is received on stdin is now `rust_out`
instead of `rust-out`.
* The crate name for a crate in the file `foo-bar.rs` is now `foo_bar` which can
affect infrastructure such as logging.
[breaking-change]
This commit:
* Introduces `std::convert`, providing an implementation of
RFC 529.
* Deprecates the `AsPath`, `AsOsStr`, and `IntoBytes` traits, all
in favor of the corresponding generic conversion traits.
Consequently, various IO APIs now take `AsRef<Path>` rather than
`AsPath`, and so on. Since the types provided by `std` implement both
traits, this should cause relatively little breakage.
* Deprecates many `from_foo` constructors in favor of `from`.
* Changes `PathBuf::new` to take no argument (creating an empty buffer,
as per convention). The previous behavior is now available as
`PathBuf::from`.
* De-stabilizes `IntoCow`. It's not clear whether we need this separate trait.
Closes#22751Closes#14433
[breaking-change]
This commit performs a stabilization pass over the `std::fs` module now that
it's had some time to bake. The change was largely just adding `#[stable]` tags,
but there are a few APIs that remain `#[unstable]`.
The following apis are now marked `#[stable]`:
* `std::fs` (the name)
* `File`
* `Metadata`
* `ReadDir`
* `DirEntry`
* `OpenOptions`
* `Permissions`
* `File::{open, create}`
* `File::{sync_all, sync_data}`
* `File::set_len`
* `File::metadata`
* Trait implementations for `File` and `&File`
* `OpenOptions::new`
* `OpenOptions::{read, write, append, truncate, create}`
* `OpenOptions::open` - this function was modified, however, to not attempt to
reject cross-platform openings of directories. This means that some platforms
will succeed in opening a directory and others will fail.
* `Metadata::{is_dir, is_file, len, permissions}`
* `Permissions::{readonly, set_readonly}`
* `Iterator for ReadDir`
* `DirEntry::path`
* `remove_file` - like with `OpenOptions::open`, the extra windows code to
remove a readonly file has been removed. This means that removing a readonly
file will succeed on some platforms but fail on others.
* `metadata`
* `rename`
* `copy`
* `hard_link`
* `soft_link`
* `read_link`
* `create_dir`
* `create_dir_all`
* `remove_dir`
* `remove_dir_all`
* `read_dir`
The following apis remain `#[unstable]`.
* `WalkDir` and `walk` - there are many methods by which a directory walk can be
constructed, and it's unclear whether the current semantics are the right
ones. For example symlinks are not handled super well currently. This is now
behind a new `fs_walk` feature.
* `File::path` - this is an extra abstraction which the standard library
provides on top of what the system offers and it's unclear whether we should
be doing so. This is now behind a new `file_path` feature.
* `Metadata::{accessed, modified}` - we do not currently have a good
abstraction for a moment in time which is what these APIs should likely be
returning, so these remain `#[unstable]` for now. These are now behind a new
`fs_time` feature
* `set_file_times` - like with `Metadata::accessed`, we do not currently have
the appropriate abstraction for the arguments here so this API remains
unstable behind the `fs_time` feature gate.
* `PathExt` - the precise set of methods on this trait may change over time and
some methods may be removed. This API remains unstable behind the `path_ext`
feature gate.
* `set_permissions` - we may wish to expose a more granular ability to set the
permissions on a file instead of just a blanket \"set all permissions\" method.
This function remains behind the `fs` feature.
The following apis are now `#[deprecated]`
* The `TempDir` type is now entirely deprecated and is [located on
crates.io][tempdir] as the `tempdir` crate with [its source][github] at
rust-lang/tempdir.
[tempdir]: https://crates.io/crates/tempdir
[github]: https://github.com/rust-lang/tempdir
The stability of some of these APIs has been questioned over the past few weeks
in using these APIs, and it is intentional that the majority of APIs here are
marked `#[stable]`. The `std::fs` module has a lot of room to grow and the
material is [being tracked in a RFC issue][rfc-issue].
[rfc-issue]: rust-lang/rfcs#939
Closes#22879
[breaking-change]
The new `io` module has had some time to bake and this commit stabilizes some of
the utilities associated with it. This commit also deprecates a number of
`std::old_io::util` functions and structures.
These items are now `#[stable]`
* `Cursor`
* `Cursor::{new, into_inner, get_ref, get_mut, position, set_position}`
* Implementations of I/O traits for `Cursor<T>`
* Delegating implementations of I/O traits for references and `Box` pointers
* Implementations of I/O traits for primitives like slices and `Vec<T>`
* `ReadExt::bytes`
* `Bytes` (and impls)
* `ReadExt::chain`
* `Chain` (and impls)
* `ReadExt::take` (and impls)
* `BufReadExt::lines`
* `Lines` (and impls)
* `io::copy`
* `io::{empty, Empty}` (and impls)
* `io::{sink, Sink}` (and impls)
* `io::{repeat, Repeat}` (and impls)
These items remain `#[unstable]`
* Core I/O traits. These may want a little bit more time to bake along with the
commonly used methods like `read_to_end`.
* `BufReadExt::split` - this function may be renamed to not conflict with
`SliceExt::split`.
* `Error` - there are a number of questions about its representation,
`ErrorKind`, and usability.
These items are now `#[deprecated]` in `old_io`
* `LimitReader` - use `take` instead
* `NullWriter` - use `io::sink` instead
* `ZeroReader` - use `io::repeat` instead
* `NullReader` - use `io::empty` instead
* `MultiWriter` - use `broadcast` instead
* `ChainedReader` - use `chain` instead
* `TeeReader` - use `tee` instead
* `copy` - use `io::copy` instead
[breaking-change]
This commit performs a stabilization pass over the `std::fs` module now that
it's had some time to bake. The change was largely just adding `#[stable]` tags,
but there are a few APIs that remain `#[unstable]`.
The following apis are now marked `#[stable]`:
* `std::fs` (the name)
* `File`
* `Metadata`
* `ReadDir`
* `DirEntry`
* `OpenOptions`
* `Permissions`
* `File::{open, create}`
* `File::{sync_all, sync_data}`
* `File::set_len`
* `File::metadata`
* Trait implementations for `File` and `&File`
* `OpenOptions::new`
* `OpenOptions::{read, write, append, truncate, create}`
* `OpenOptions::open` - this function was modified, however, to not attempt to
reject cross-platform openings of directories. This means that some platforms
will succeed in opening a directory and others will fail.
* `Metadata::{is_dir, is_file, len, permissions}`
* `Permissions::{readonly, set_readonly}`
* `Iterator for ReadDir`
* `DirEntry::path`
* `remove_file` - like with `OpenOptions::open`, the extra windows code to
remove a readonly file has been removed. This means that removing a readonly
file will succeed on some platforms but fail on others.
* `metadata`
* `rename`
* `copy`
* `hard_link`
* `soft_link`
* `read_link`
* `create_dir`
* `create_dir_all`
* `remove_dir`
* `remove_dir_all`
* `read_dir`
The following apis remain `#[unstable]`.
* `WalkDir` and `walk` - there are many methods by which a directory walk can be
constructed, and it's unclear whether the current semantics are the right
ones. For example symlinks are not handled super well currently. This is now
behind a new `fs_walk` feature.
* `File::path` - this is an extra abstraction which the standard library
provides on top of what the system offers and it's unclear whether we should
be doing so. This is now behind a new `file_path` feature.
* `Metadata::{accessed, modified}` - we do not currently have a good
abstraction for a moment in time which is what these APIs should likely be
returning, so these remain `#[unstable]` for now. These are now behind a new
`fs_time` feature
* `set_file_times` - like with `Metadata::accessed`, we do not currently have
the appropriate abstraction for the arguments here so this API remains
unstable behind the `fs_time` feature gate.
* `PathExt` - the precise set of methods on this trait may change over time and
some methods may be removed. This API remains unstable behind the `path_ext`
feature gate.
* `set_permissions` - we may wish to expose a more granular ability to set the
permissions on a file instead of just a blanket "set all permissions" method.
This function remains behind the `fs` feature.
The following apis are now `#[deprecated]`
* The `TempDir` type is now entirely deprecated and is [located on
crates.io][tempdir] as the `tempdir` crate with [its source][github] at
rust-lang/tempdir.
[tempdir]: https://crates.io/crates/tempdir
[github]: https://github.com/rust-lang/tempdir
The stability of some of these APIs has been questioned over the past few weeks
in using these APIs, and it is intentional that the majority of APIs here are
marked `#[stable]`. The `std::fs` module has a lot of room to grow and the
material is [being tracked in a RFC issue][rfc-issue].
[rfc-issue]: https://github.com/rust-lang/rfcs/issues/939
[breaking-change]
The new `io` module has had some time to bake and this commit stabilizes some of
the utilities associated with it. This commit also deprecates a number of
`std::old_io::util` functions and structures.
These items are now `#[stable]`
* `Cursor`
* `Cursor::{new, into_inner, get_ref, get_mut, position, set_position}`
* Implementations of I/O traits for `Cursor<T>`
* Delegating implementations of I/O traits for references and `Box` pointers
* Implementations of I/O traits for primitives like slices and `Vec<T>`
* `ReadExt::bytes`
* `Bytes` (and impls)
* `ReadExt::chain`
* `Chain` (and impls)
* `ReadExt::take` (and impls)
* `BufReadExt::lines`
* `Lines` (and impls)
* `io::copy`
* `io::{empty, Empty}` (and impls)
* `io::{sink, Sink}` (and impls)
* `io::{repeat, Repeat}` (and impls)
These items remain `#[unstable]`
* Core I/O traits. These may want a little bit more time to bake along with the
commonly used methods like `read_to_end`.
* `BufReadExt::split` - this function may be renamed to not conflict with
`SliceExt::split`.
* `Error` - there are a number of questions about its representation,
`ErrorKind`, and usability.
These items are now `#[deprecated]` in `old_io`
* `LimitReader` - use `take` instead
* `NullWriter` - use `io::sink` instead
* `ZeroReader` - use `io::repeat` instead
* `NullReader` - use `io::empty` instead
* `MultiWriter` - use `broadcast` instead
* `ChainedReader` - use `chain` instead
* `TeeReader` - use `tee` instead
* `copy` - use `io::copy` instead
[breaking-change]
This commit deprecates the majority of std::old_io::fs in favor of std::fs and
its new functionality. Some functions remain non-deprecated but are now behind a
feature gate called `old_fs`. These functions will be deprecated once
suitable replacements have been implemented.
The compiler has been migrated to new `std::fs` and `std::path` APIs where
appropriate as part of this change.
This pulls out the implementations of most built-in lints into a
separate crate, to reduce edit-compile-test iteration times with
librustc_lint and increase parallelism. This should enable lints to be
refactored, added and deleted much more easily as it slashes the
edit-compile cycle to get a minimal working compiler to test with (`make
rustc-stage1`) from
librustc -> librustc_typeck -> ... -> librustc_driver ->
libcore -> ... -> libstd
to
librustc_lint -> librustc_driver -> libcore -> ... libstd
which is significantly faster, mainly due to avoiding the librustc build
itself.
The intention would be to move as much as possible of the infrastructure
into the crate too, but the plumbing is deeply intertwined with librustc
itself at the moment. Also, there are lints for which diagnostics are
registered directly in the compiler code, not in their own crate
traversal, and their definitions have to remain in librustc.
This is a [breaking-change] for direct users of the compiler APIs:
callers of `rustc::session::build_session` or
`rustc::session::build_session_` need to manually call
`rustc_lint::register_builtins` on their return value.
This should make #22206 easier.
This commit moves `std::env` away from the `std::old_io` error type as well as
the `std::old_path` module. Methods returning an error now return `io::Error`
and methods consuming or returning paths use `std::path` instead of
`std::old_path`. This commit does not yet mark these APIs as `#[stable]`.
This commit also migrates `std::old_io::TempDir` to `std::fs::TempDir` with
essentially the exact same API. This type was added to interoperate with the new
path API and has its own `tempdir` feature.
Finally, this commit reverts the deprecation of `std::os` APIs returning the old
path API types. This deprecation can come back once the entire `std::old_path`
module is deprecated.
[breaking-change]
This is an implementation of [RFC 578][rfc] which adds a new `std::env` module
to replace most of the functionality in the current `std::os` module. More
details can be found in the RFC itself, but as a summary the following methods
have all been deprecated:
[rfc]: https://github.com/rust-lang/rfcs/pull/578
* `os::args_as_bytes` => `env::args`
* `os::args` => `env::args`
* `os::consts` => `env::consts`
* `os::dll_filename` => no replacement, use `env::consts` directly
* `os::page_size` => `env::page_size`
* `os::make_absolute` => use `env::current_dir` + `join` instead
* `os::getcwd` => `env::current_dir`
* `os::change_dir` => `env::set_current_dir`
* `os::homedir` => `env::home_dir`
* `os::tmpdir` => `env::temp_dir`
* `os::join_paths` => `env::join_paths`
* `os::split_paths` => `env::split_paths`
* `os::self_exe_name` => `env::current_exe`
* `os::self_exe_path` => use `env::current_exe` + `pop`
* `os::set_exit_status` => `env::set_exit_status`
* `os::get_exit_status` => `env::get_exit_status`
* `os::env` => `env::vars`
* `os::env_as_bytes` => `env::vars`
* `os::getenv` => `env::var` or `env::var_string`
* `os::getenv_as_bytes` => `env::var`
* `os::setenv` => `env::set_var`
* `os::unsetenv` => `env::remove_var`
Many function signatures have also been tweaked for various purposes, but the
main changes were:
* `Vec`-returning APIs now all return iterators instead
* All APIs are now centered around `OsString` instead of `Vec<u8>` or `String`.
There is currently on convenience API, `env::var_string`, which can be used to
get the value of an environment variable as a unicode `String`.
All old APIs are `#[deprecated]` in-place and will remain for some time to allow
for migrations. The semantics of the APIs have been tweaked slightly with regard
to dealing with invalid unicode (panic instead of replacement).
The new `std::env` module is all contained within the `env` feature, so crates
must add the following to access the new APIs:
#![feature(env)]
[breaking-change]
This is wanted by external tooling that uses rustdoc. There are likely
some bugs when actually generating HTML output (which may expect to be
able to read the source) but all I need for now is the cleaned crate and
analysis.
Because we are warning about unstable APIs and there are many
of these yet, this creates a high likelyhood doc tests will
fail.
This doesn't seem right as a blanket policy to me anyway, though
certainly we want it in std. Probably more appropriate to add
a rustdoc option.
This partially implements the feature staging described in the
[release channel RFC][rc]. It does not yet fully conform to the RFC as
written, but does accomplish its goals sufficiently for the 1.0 alpha
release.
It has three primary user-visible effects:
* On the nightly channel, use of unstable APIs generates a warning.
* On the beta channel, use of unstable APIs generates a warning.
* On the beta channel, use of feature gates generates a warning.
Code that does not trigger these warnings is considered 'stable',
modulo pre-1.0 bugs.
Disabling the warnings for unstable APIs continues to be done in the
existing (i.e. old) style, via `#[allow(...)]`, not that specified in
the RFC. I deem this marginally acceptable since any code that must do
this is not using the stable dialect of Rust.
Use of feature gates is itself gated with the new 'unstable_features'
lint, on nightly set to 'allow', and on beta 'warn'.
The attribute scheme used here corresponds to an older version of the
RFC, with the `#[staged_api]` crate attribute toggling the staging
behavior of the stability attributes, but the user impact is only
in-tree so I'm not concerned about having to make design changes later
(and I may ultimately prefer the scheme here after all, with the
`#[staged_api]` crate attribute).
Since the Rust codebase itself makes use of unstable features the
compiler and build system to a midly elaborate dance to allow it to
bootstrap while disobeying these lints (which would otherwise be
errors because Rust builds with `-D warnings`).
This patch includes one significant hack that causes a
regression. Because the `format_args!` macro emits calls to unstable
APIs it would trigger the lint. I added a hack to the lint to make it
not trigger, but this in turn causes arguments to `println!` not to be
checked for feature gates. I don't presently understand macro
expansion well enough to fix. This is bug #20661.
Closes#16678
[rc]: https://github.com/rust-lang/rfcs/blob/master/text/0507-release-channels.md
This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
This commit is an implementation of [RFC 503][rfc] which is a stabilization
story for the prelude. Most of the RFC was directly applied, removing reexports.
Some reexports are kept around, however:
* `range` remains until range syntax has landed to reduce churn.
* `Path` and `GenericPath` remain until path reform lands. This is done to
prevent many imports of `GenericPath` which will soon be removed.
* All `io` traits remain until I/O reform lands so imports can be rewritten all
at once to `std::io::prelude::*`.
This is a breaking change because many prelude reexports have been removed, and
the RFC can be consulted for the exact list of removed reexports, as well as to
find the locations of where to import them.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0503-prelude-stabilization.md
[breaking-change]
Closes#20068
This commit is a second pass stabilization for the `std::comm` module,
performing the following actions:
* The entire `std::comm` module was moved under `std::sync::mpsc`. This movement
reflects that channels are just yet another synchronization primitive, and
they don't necessarily deserve a special place outside of the other
concurrency primitives that the standard library offers.
* The `send` and `recv` methods have all been removed.
* The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`.
This means that all send/receive operations return a `Result` now indicating
whether the operation was successful or not.
* The error type of `send` is now a `SendError` to implement a custom error
message and allow for `unwrap()`. The error type contains an `into_inner`
method to extract the value.
* The error type of `recv` is now `RecvError` for the same reasons as `send`.
* The `TryRecvError` and `TrySendError` types have had public reexports removed
of their variants and the variant names have been tweaked with enum
namespacing rules.
* The `Messages` iterator is renamed to `Iter`
This functionality is now all `#[stable]`:
* `Sender`
* `SyncSender`
* `Receiver`
* `std::sync::mpsc`
* `channel`
* `sync_channel`
* `Iter`
* `Sender::send`
* `Sender::clone`
* `SyncSender::send`
* `SyncSender::try_send`
* `SyncSender::clone`
* `Receiver::recv`
* `Receiver::try_recv`
* `Receiver::iter`
* `SendError`
* `RecvError`
* `TrySendError::{mod, Full, Disconnected}`
* `TryRecvError::{mod, Empty, Disconnected}`
* `SendError::into_inner`
* `TrySendError::into_inner`
This is a breaking change due to the modification of where this module is
located, as well as the changing of the semantics of `send` and `recv`. Most
programs just need to rename imports of `std::comm` to `std::sync::mpsc` and
add calls to `unwrap` after a send or a receive operation.
[breaking-change]
