Current behaviour demo: http://is.gd/l3FEgo
(The span is printed at the start of the source code)
This patch moves the span to the use of `$i` in the macro rhs (as the code comment already claims)
This commit is an implementation of [RFC 1183][rfc] which allows swapping out
the default allocator on nightly Rust. No new stable surface area should be
added as a part of this commit.
[rfc]: https://github.com/rust-lang/rfcs/pull/1183
Two new attributes have been added to the compiler:
* `#![needs_allocator]` - this is used by liballoc (and likely only liballoc) to
indicate that it requires an allocator crate to be in scope.
* `#![allocator]` - this is a indicator that the crate is an allocator which can
satisfy the `needs_allocator` attribute above.
The ABI of the allocator crate is defined to be a set of symbols that implement
the standard Rust allocation/deallocation functions. The symbols are not
currently checked for exhaustiveness or typechecked. There are also a number of
restrictions on these crates:
* An allocator crate cannot transitively depend on a crate that is flagged as
needing an allocator (e.g. allocator crates can't depend on liballoc).
* There can only be one explicitly linked allocator in a final image.
* If no allocator is explicitly requested one will be injected on behalf of the
compiler. Binaries and Rust dylibs will use jemalloc by default where
available and staticlibs/other dylibs will use the system allocator by
default.
Two allocators are provided by the distribution by default, `alloc_system` and
`alloc_jemalloc` which operate as advertised.
Closes#27389
This commit is an implementation of [RFC 1183][rfc] which allows swapping out
the default allocator on nightly Rust. No new stable surface area should be
added as a part of this commit.
[rfc]: https://github.com/rust-lang/rfcs/pull/1183
Two new attributes have been added to the compiler:
* `#![needs_allocator]` - this is used by liballoc (and likely only liballoc) to
indicate that it requires an allocator crate to be in scope.
* `#![allocator]` - this is a indicator that the crate is an allocator which can
satisfy the `needs_allocator` attribute above.
The ABI of the allocator crate is defined to be a set of symbols that implement
the standard Rust allocation/deallocation functions. The symbols are not
currently checked for exhaustiveness or typechecked. There are also a number of
restrictions on these crates:
* An allocator crate cannot transitively depend on a crate that is flagged as
needing an allocator (e.g. allocator crates can't depend on liballoc).
* There can only be one explicitly linked allocator in a final image.
* If no allocator is explicitly requested one will be injected on behalf of the
compiler. Binaries and Rust dylibs will use jemalloc by default where
available and staticlibs/other dylibs will use the system allocator by
default.
Two allocators are provided by the distribution by default, `alloc_system` and
`alloc_jemalloc` which operate as advertised.
Closes#27389
This PR implements the majority of RFC 1214. In particular, it implements:
- the new outlives relation
- comprehensive WF checking
For the most part, new code receives warnings, not errors, though 3 regressions were found via a crater run.
There are some deviations from RFC 1214. Most notably:
- we still consider implied bounds from fn ret; this intersects other soundness issues that I intend to address in detail in a follow-up RFC. Fixing this without breaking a lot of code probably requires rewriting compare-method somewhat (which is probably a good thing).
- object types do not check trait bounds for fear of encountering `Self`; this was left as an unresolved question in RFC 1214, but ultimately feels inconsistent.
Both of those two issues are highlighted in the tracking issue, https://github.com/rust-lang/rust/issues/27579. #27579 also includes a testing matrix with new tests that I wrote -- these probably duplicate some existing tests, I tried to check but wasn't quite sure what to look for. I tried to be thorough in testing the WF relation, at least, but would welcome suggestions for missing tests.
r? @nrc (or perhaps someone else?)
* An apparent bug in VS 2013's implementation of the `exp2` function is worked
around in one of flt2dec's tests.
Turns out this was the only fix necessary!
Rename String::into_boxed_slice -> into_boxed_str
This is the name that was decided in rust-lang/rfcs#1152, and it's
better if we say “boxed str” for `Box<str>`.
The old name `String::into_boxed_slice` is deprecated.
This commit removes all unstable and deprecated functions in the standard
library. A release was recently cut (1.3) which makes this a good time for some
spring cleaning of the deprecated functions.
New enough find on Linux doesn't support "-perm +..." and suggests
using "-perm /..." instead, but that doesn't work on Windows.
Hopefully all platforms are happy with this expanded version.
I don't have access to a Windows development system to test this, so someone needs to verify that this actually works there before merging.
Closes#19981.
Completely rewrite the conversion of decimal strings to `f64` and `f32`. The code is intended to be absolutely positively completely 100% accurate (when it doesn't give up). To the best of my knowledge, it achieves that goal. Any input that is not rejected is converted to the floating point number that is closest to the true value of the input. This includes overflow, subnormal numbers, and underflow to zero. In other words, the rounding error is less than or equal to 0.5 units in the last place. Half-way cases (exactly 0.5 ULP error) are handled with half-to-even rounding, also known as banker's rounding.
This code implements the algorithms from the paper [How to Read Floating Point Numbers Accurately][paper] by William D. Clinger, with extensions to handle underflow, overflow and subnormals, as well as some algorithmic optimizations.
# Correctness
With such a large amount of tricky code, many bugs are to be expected. Indeed tracking down the obscure causes of various rounding errors accounts for the bulk of the development time. Extensive tests (taking in the order of hours to run through to completion) are included in `src/etc/test-float-parse`: Though exhaustively testing all possible inputs is impossible, I've had good success with generating millions of instances from various "classes" of inputs. These tests take far too long to be run by @bors so contributors who touch this code need the discipline to run them. There are `#[test]`s, but they don't even cover every stupid mistake I made in course of writing this.
Another aspect is *integer* overflow. Extreme (or malicious) inputs could cause overflow both in the machine-sized integers used for bookkeeping throughout the algorithms (e.g., the decimal exponent) as well as the arbitrary-precision arithmetic. There is input validation to reject all such cases I know of, and I am quite sure nobody will *accidentally* cause this code to go out of range. Still, no guarantees.
# Limitations
Noticed the weasel words "(when it doesn't give up)" at the beginning? Some otherwise well-formed decimal strings are rejected because spelling out the value of the input requires too many digits, i.e., `digits * 10^abs(exp)` can't be stored in a bignum. This only applies if the value is not "obviously" zero or infinite, i.e., if you take a near-infinity or near-zero value and add many pointless fractional digits. At least with the algorithm used here, computing the precise value would require computing the full value as a fraction, which would overflow. The precise limit is `number_of_digits + abs(exp) > 375` but could be raised almost arbitrarily. In the future, another algorithm might lift this restriction entirely.
This should not be an issue for any realistic inputs. Still, the code does reject inputs that would result in a finite float when evaluated with unlimited precision. Some of these inputs are even regressions that the old code (mostly) handled, such as `0.333...333` with 400+ `3`s. Thus this might qualify as [breaking-change].
# Performance
Benchmarks results are... tolerable. Short numbers that hit the fast paths (`f64` multiplication or shortcuts to zero/inf) have performance in the same order of magnitude as the old code tens of nanoseconds. Numbers that are delegated to Algorithm Bellerophon (using floats with 64 bit significand, implemented in software) are slower, but not drastically so (couple hundred nanoseconds).
Numbers that need the AlgorithmM fallback (for `f64`, roughly everything below 1e-305 and above 1e305) take far, far longer, hundreds of microseconds. Note that my implementation is not quite as naive as the expository version in the paper (it needs one to four division instead of ~1000), but division is fundamentally pretty expensive and my implementation of it is extremely simple and slow.
All benchmarks run on a mediocre laptop with a i5-4200U CPU under light load.
# Binary size
Unfortunately the implementation needs to duplicate almost all code: Once for `f32` and once for `f64`. Before you ask, no, this cannot be avoided, at least not completely (but see the Future Work section). There's also a precomputed table of powers of ten, weighing in at about six kilobytes.
Running a stage1 `rustc` over a stand-alone program that simply parses pi to `f32` and `f64` and outputs both results reveals that the overhead vs. the old parsing code is about 44 KiB normally and about 28 KiB with LTO. It's presumably half of that + 3 KiB when only one of the two code paths is exercised.
| rustc options | old | new | delta |
|--------------------------- |--------- |--------- |----------- |
| [nothing] | 2588375 | 2633828 | 44.39 KiB |
| -O | 2585211 | 2630688 | 44.41 KiB |
| -O -C lto | 1026353 | 1054981 | 27.96 KiB |
| -O -C lto -C link-args=-s | 414208 | 442368 | 27.5 KiB |
# Future Work
## Directory layout
The `dec2flt` code uses some types embedded deeply in the `flt2dec` module hierarchy, even though nothing about them it formatting-specific. They should be moved to a more conversion-direction-agnostic location at some point.
## Performance
It could be much better, especially for large inputs. Some low-hanging fruit has been picked but much more work could be done. Some specific ideas are jotted down in `FIXME`s all over the code.
## Binary size
One could try to compress the table further, though I am skeptical. Another avenue would be reducing the code duplication from basically everything being generic over `T: RawFloat`. Perhaps one can reduce the magnitude of the duplication by pushing the parts that don't need to know the target type into separate functions, but this is finicky and probably makes some code read less naturally.
## Other bases
This PR leaves `f{32,64}::from_str_radix` alone. It only replaces `FromStr` (and thus `.parse()`). I am convinced that `from_str_radix` should not exist, and have proposed its [deprecation and speedy removal][deprecate-radix]. Whatever the outcome of that discussion, it is independent from, and out of scope for, this PR.
Fixes#24557Fixes#14353
r? @pnkfelix
cc @lifthrasiir @huonw
[paper]: http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.45.4152
[deprecate-radix]: https://internals.rust-lang.org/t/deprecate-f-32-64-from-str-radix/2405
This is the name that was decided in rust-lang/rfcs#1152, and it's
better if we say “boxed str” for `Box<str>`.
The old name `String::into_boxed_slice` is deprecated.
Types with interior mutability like `Cell` and `RefCell` can be used to
skirt the restriction on mutating mutable values inside an immutable
container.
This adds detailed diagnostics for `E0383`, 'partial reinitialization of
uninitialized structure'.
This is part of rust-lang/rust#24407.
r? @Manishearth
The corrected signature of `ioctl` broke some crates on crates.io, and it's not
currently worth the major version bump of libc, so for now keep the old
signature around for crates.io builds only with a comment to remove it at a
future date.
This should allow libc on crates.io to update to the master version in-tree.
I've verified that this was the only breakage of substance between the version
libc is currently built with and today's master branch.
Initial version of PR had an DerefMut implementation, which was later removed
because it may cause mutable reference aliasing.
Suggest how to implement mutability with reentrant mutex and remove the claim we
implement DerefMut.
Per @steveklabnik's comment [here](https://github.com/rust-lang/cargo/issues/739#issuecomment-130085860), the Pandoc components of the Makefile are no longer used, and as such the corresponding components of the documentation are out of date.
- I've removed the Pandoc (and therefore also LaTeX) elements of the makefile and confirmed that the build proceeds correctly.
- I updated the documentation to reference `rustdoc` and of Pandoc.
r? @steveklabnik
