Add variance-related information to lifetime error messages
This PR adds a basic framework for displaying variance-related information in error messages. For example:
```
error: lifetime may not live long enough
--> $DIR/type-check-pointer-comparisons.rs:12:5
|
LL | fn compare_mut<'a, 'b>(x: *mut &'a i32, y: *mut &'b i32) {
| -- -- lifetime `'b` defined here
| |
| lifetime `'a` defined here
LL | x == y;
| ^ requires that `'a` must outlive `'b`
|
= help: consider adding the following bound: `'a: 'b`
= note: requirement occurs because of a mutable pointer to &i32
= note: mutable pointers are invariant over their type parameter
= help: see <https://doc.rust-lang.org/nomicon/subtyping.html> for more information about variance
```
The last three lines are new.
This is accomplished by adding a new struct `VarianceDiagInfo`, and passing it along through the various relation methods. When relating types that change the variance (e.g. `&mut T` or `*mut T`), we pass a more specific `VarianceDiagInfo` storing information about the cause of the variance change. When an error, we use the `VarianceDiagInfo` to add additional information to the error message.
This PR doesn't change any variance-related computation or behavior - only diagnostic messages. Therefore, the implementation is quite incomplete - more detailed error messages can be filled in in subsequent PRs.
Limitations:
* We only attempt to deal with invariance - since it's at the bottom of the 'variance lattice', our variance will never change again after it becomes invariant. Handling contravariance would be trickier, since we can change between contravariance and covariance multiple times (e.g. `fn(fn(&'static u8))`). Since contravariance (AFAIK) is only used for function arguments, we can probably get away without a very fancy message for cases involving contravariance.
* `VarianceDiagInfo` currently only handles mutable pointers/references. However, user-defined types (structs, enums, and unions) have the variance of their type parameters inferred, so it would be good to eventually display information about that. We'll want to try to find a balance between displaying too much and too little information about how the variance was inferred.
* The improved error messages are only displayed when `#![feature(nll)]` / `-Z borrowck=mir` is enabled. If issue https://github.com/rust-lang/rust/issues/58781 is not resolved relatively soon, then we might want to duplicate some of this logic in the 'current' (non-NLL) region/outlives handling code.
linker: Reorder linker arguments
- Split arguments into order-independent and order-dependent, to define more precisely what (pre-,post-,late-,)link-args mean.
- Add some comments.
- Combine all native library arguments together, to simplify potential support for library deduplication and similar things
- Split arguments into order-independent and order-dependent, to define more precisely what (pre,post,late)-link-args mean
parser: Ensure that all nonterminals have tokens after parsing
`parse_nonterminal` should always result in something with tokens.
This requirement wasn't satisfied in two cases:
- `stmt` nonterminal with expression statements (e.g. `0`, or `{}`, or `path + 1`) because `fn parse_stmt_without_recovery` forgot to propagate `force_collect` in some cases.
- `expr` nonterminal with expressions with built-in attributes (e.g. `#[allow(warnings)] 0`) due to an incorrect optimization in `fn parse_expr_force_collect`, it assumed that all expressions starting with `#` have their tokens collected during parsing, but that's not true if all the attributes on that expression are built-in and inert.
(Discovered when trying to implement eager `cfg` expansion for all attributes https://github.com/rust-lang/rust/pull/83824#issuecomment-817317170.)
r? `@Aaron1011`
Drop an `if let` that will always succeed
We've already checked that `proj_base == []` in the line above and renaming
`place_local` to `local` doesn't gain us anything.
``@rustbot`` modify labels +C-cleanup +T-compiler
Tweak wasm_base target spec to indicate linker is not GNU and update linker inferring logic for wasm-ld.
Reported via [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/wasi.20linker.20unknown.20argument.3A.20--as-needed): we try passing `--as-needed` to the linker if it's GNU ld which `wasm-ld` is not. Usually this isn't an issue for wasm as we would use the WasmLd linker driver but because the linker in question (`wasm32-unknown-wasi-wasm-ld`) ended with `-ld` our linker inferring [logic](f64503eb55/compiler/rustc_codegen_ssa/src/back/link.rs (L957-L1040)) used the `GccLinker` implementations. (UPD: The linker inferring logic actually didn't apply in this case because the linker is actually invoked through gcc in the reported issue. But it's still worth updating the logic I think.)
This change then has 2 parts:
1. Update wasm_base target spec to indicate `linker_is_gnu: false` plus a few additions of `target.is_like_wasm` to handle flags `wasm-ld` does in fact support.
2. Improve the linker detection logic to properly determine the correct flavor of wasm linker we're using when we can.
We need to add the new `target.is_like_wasm` branches to handle the case where the "linker" used could be something like clang which would then under the hood call wasm-ld.
Preserve metadata w/ Solaris-like linkers.
#84468 moved the `-zignore` linker flag from the `gc_sections` method to `add_as_needed` which is more accurate but Solaris-style linkers will also end up removing an unreferenced ELF sections [1]. This had the unfortunate side effect of causing the `.rustc` section (which has the metada) to be removed which could cause issues when trying to link against the resulting crates or use proc macros.
Since the `-zignore` is positional, we fix this by moving the metadata objects to before the flag.
[1] Specifically a section is considered unreferenced if:
* The section is allocatable
* No other sections bind to (relocate) to this section
* The section provides no global symbols
https://docs.oracle.com/cd/E19683-01/817-3677/6mj8mbtbs/index.html#chapter4-19
Show test type during prints
Test output can sometimes be confusing. For example doctest with the no_run argument are displayed the same way than test that are run.
During #83857 I got the feedback that test output can be confusing.
For the moment test output is
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) ... ok
test $DIR/test-type.rs - f (line 21) ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
I propose to change output by indicating the test type as
```
test $DIR/test-type.rs - f (line 12) ... ignored
test $DIR/test-type.rs - f (line 15) - compile ... ok
test $DIR/test-type.rs - f (line 21) - compile fail ... ok
test $DIR/test-type.rs - f (line 6) ... ok
```
by indicating the test type after the test name (and in the case of doctest after the function name and line) and before the "...".
------------
Note: this is a proof of concept, the implementation is probably not optimal as the properties added in `TestDesc` are only use in the display and does not represent actual change of behavior, maybe `TestType::DocTest` could have fields
Partial support for raw-dylib linkage
First cut of functionality for issue #58713: add support for `#[link(kind = "raw-dylib")]` on `extern` blocks in lib crates compiled to .rlib files. Does not yet support `#[link_name]` attributes on functions, or the `#[link_ordinal]` attribute, or `#[link(kind = "raw-dylib")]` on `extern` blocks in bin crates; I intend to publish subsequent PRs to fill those gaps. It's also not yet clear whether this works for functions in `extern "stdcall"` blocks; I also intend to investigate that shortly and make any necessary changes as a follow-on PR.
This implementation calls out to an LLVM function to construct the actual `.idata` sections as temporary `.lib` files on disk and then links those into the generated .rlib.
BPF target support
This adds `bpfel-unknown-none` and `bpfeb-unknown-none`, two new no_std targets that generate little and big endian BPF. The approach taken is very similar to the cuda target, where `TargetOptions::obj_is_bitcode` is enabled and code generation is done by the linker.
I added the targets to `dist-various-2`. There are [some tests](https://github.com/alessandrod/bpf-linker/tree/main/tests/assembly) in bpf-linker and I'm planning to add more. Those are currently not ran as part of rust CI.
Remove special handling of `box_free` from `LocalAnalyzer`
The special casing of `box_free` predates the use of dominators in
analyzer. It is no longer necessary now that analyzer verifies that
the first assignment dominates all uses.
This addresses a codegen-issue that needs to be fixed upstream in LLVM.
While we wait for the fix, we can disable it.
Verified manually that the outliner is no longer run when
`-Copt-level=z` is specified, and also that you can override this with
`-Cllvm-args=-enable-machine-outliner` if you need it anyway.
A regression test is not really feasible in this instance, given that we
do not have any minimal reproducers.
Fixes#85351
Allow raw pointers in SIMD types
Closes#85915 by loosening the strictness in typechecking and adding a test to guarantee it passes.
This still might be too strict, as references currently do pass monomorphization, but my understanding is that they are not guaranteed to be "scalar" in the same way.
Remove `doc(include)`
This nightly feature is redundant now that `extended_key_value_attributes` is stable (https://github.com/rust-lang/rust/pull/83366). `@rust-lang/rustdoc` not sure if you think this needs FCP; there was already an FCP in #82539, but technically it was for deprecating, not removing the feature altogether.
This should not be merged before #83366.
cc `@petrochenkov`
Implement DepTrackingHash for `Option` through blanket impls instead of macros
This avoids having to add a new macro call for both the `Option` and the type itself.
Noticed this while working on https://github.com/rust-lang/rust/pull/84233.
r? `@Aaron1011`
This does not yet support #[link_name] attributes on functions, the #[link_ordinal]
attribute, #[link(kind = "raw-dylib")] on extern blocks in bin crates, or
stdcall functions on 32-bit x86.
don't suggest unsized indirection in where-clauses
Skip where-clauses when suggesting using indirection in combination with
`?Sized` bounds on type parameters.
Fixes#85943.
`@estebank` I think this doesn't conflict with your work in #85947; please let me know if you'd like me to cherry pick it to a new branch based on yours instead.
wasm: Make simd types passed via indirection again
This commit updates wasm target specs to use `simd_types_indirect: true`
again. Long ago this was added since wasm simd types were always
translated to `v128` under-the-hood in LLVM, meaning that it didn't
matter whether that target feature was enabled or not. Now, however,
`v128` is conditionally used in codegen depending on target features
enabled, meaning that it's possible to get linker errors about different
signatures in code that correctly uses simd types. The fix is the same
as for all other platforms, which is to pass the type indirectly.
rustc: Store metadata-in-rlibs in object files
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
