This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
As of RFC 18, struct layout is undefined. Opting into a C-compatible struct
layout is now down with #[repr(C)]. For consistency, specifying a packed
layout is now also down with #[repr(packed)]. Both can be specified.
To fix errors caused by this, just add #[repr(C)] to the structs, and change
#[packed] to #[repr(packed)]
Closes#14309
[breaking-change]
ImmutableVector -> ImmutableSlice
ImmutableEqVector -> ImmutableEqSlice
ImmutableOrdVector -> ImmutableOrdSlice
MutableVector -> MutableSlice
MutableVectorAllocating -> MutableSliceAllocating
MutableCloneableVector -> MutableCloneableSlice
MutableOrdVector -> MutableOrdSlice
These are all in the prelude so most code will not break.
[breaking-change]
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
As discovered in #15460, a particular #[link(kind = "static", ...)] line is not
actually guaranteed to link the library at all. The reason for this is that if
the external library doesn't have any referenced symbols in the object generated
by rustc, the entire library is dropped by the linker.
For dynamic native libraries, this is solved by passing -lfoo for all downstream
compilations unconditionally. For static libraries in rlibs this is solved
because the entire archive is bundled in the rlib. The only situation in which
this was a problem was when a static native library was linked to a rust dynamic
library.
This commit brings the behavior of dylibs in line with rlibs by passing the
--whole-archive flag to the linker when linking native libraries. On OSX, this
uses the -force_load flag. This flag ensures that the entire archive is
considered candidate for being linked into the final dynamic library.
This is a breaking change because if any static library is included twice in the
same compilation unit then the linker will start emitting errors about duplicate
definitions now. The fix for this would involve only statically linking to a
library once.
Closes#15460
[breaking-change]
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
- `width()` computes the displayed width of a string, ignoring the width of control characters.
- arguably we might do *something* else for control characters, but the question is, what?
- users who want to do something else can iterate over chars()
- `graphemes()` returns a `Graphemes` struct, which implements an iterator over the grapheme clusters of a &str.
- fully compliant with [UAX#29](http://www.unicode.org/reports/tr29/#Grapheme_Cluster_Boundaries)
- passes all [Unicode-supplied tests](http://www.unicode.org/reports/tr41/tr41-15.html#Tests29)
- added code to generate additionial categories in `unicode.py`
- `Cn` aka `Not_Assigned`
- categories necessary for grapheme cluster breaking
- tidied up the exports from libunicode
- all exports are exposed through a module rather than directly at crate root.
- std::prelude imports UnicodeChar and UnicodeStrSlice from std::char and std::str rather than directly from libunicode
closes#7043
- Graphemes and GraphemeIndices structs implement iterators over
grapheme clusters analogous to the Chars and CharOffsets for chars in
a string. Iterator and DoubleEndedIterator are available for both.
- tidied up the exports for libunicode. crate root exports are now moved
into more appropriate module locations:
- UnicodeStrSlice, Words, Graphemes, GraphemeIndices are in str module
- UnicodeChar exported from char instead of crate root
- canonical_combining_class is exported from str rather than crate root
Since libunicode's exports have changed, programs that previously relied
on the old export locations will need to change their `use` statements
to reflect the new ones. See above for more information on where the new
exports live.
closes#7043
[breaking-change]
- created new crate, libunicode, below libstd
- split Char trait into Char (libcore) and UnicodeChar (libunicode)
- Unicode-aware functions now live in libunicode
- is_alphabetic, is_XID_start, is_XID_continue, is_lowercase,
is_uppercase, is_whitespace, is_alphanumeric, is_control,
is_digit, to_uppercase, to_lowercase
- added width method in UnicodeChar trait
- determines printed width of character in columns, or None if it is
a non-NULL control character
- takes a boolean argument indicating whether the present context is
CJK or not (characters with 'A'mbiguous widths are double-wide in
CJK contexts, single-wide otherwise)
- split StrSlice into StrSlice (libcore) and UnicodeStrSlice
(libunicode)
- functionality formerly in StrSlice that relied upon Unicode
functionality from Char is now in UnicodeStrSlice
- words, is_whitespace, is_alphanumeric, trim, trim_left, trim_right
- also moved Words type alias into libunicode because words method is
in UnicodeStrSlice
- unified Unicode tables from libcollections, libcore, and libregex into
libunicode
- updated unicode.py in src/etc to generate aforementioned tables
- generated new tables based on latest Unicode data
- added UnicodeChar and UnicodeStrSlice traits to prelude
- libunicode is now the collection point for the std::char module,
combining the libunicode functionality with the Char functionality
from libcore
- thus, moved doc comment for char from core::char to unicode::char
- libcollections remains the collection point for std::str
The Unicode-aware functions that previously lived in the Char and
StrSlice traits are no longer available to programs that only use
libcore. To regain use of these methods, include the libunicode crate
and use the UnicodeChar and/or UnicodeStrSlice traits:
extern crate unicode;
use unicode::UnicodeChar;
use unicode::UnicodeStrSlice;
use unicode::Words; // if you want to use the words() method
NOTE: this does *not* impact programs that use libstd, since UnicodeChar
and UnicodeStrSlice have been added to the prelude.
closes#15224
[breaking-change]
Earlier commits have established a baseline of `experimental` stability
for all crates under the facade (so their contents are considered
experimental within libstd). Since `experimental` is `allow` by
default, we should use the same baseline stability for libstd itself.
This commit adds `experimental` tags to all of the modules defined in
`std`, and `unstable` to `std` itself.
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
Closes#14797 (librustc: Fix the issue with labels shadowing variable names by making)
Closes#14823 (Improve error messages for io::fs)
Closes#14827 (libsyntax: Allow `+` to separate trait bounds from objects.)
Closes#14834 (configure: Don't sync unused submodules)
Closes#14838 (Remove typo on collections::treemap::UnionItems)
Closes#14839 (Fix the unused struct field lint for struct variants)
Closes#14840 (Clarify `Any` docs)
Closes#14846 (rustc: [T, ..N] and [T, ..N+1] are not the same)
Closes#14847 (Audit usage of NativeMutex)
Closes#14850 (remove unnecessary PaX detection)
Closes#14856 (librustc: Take in account mutability when casting array to raw ptr.)
Closes#14859 (librustc: Forbid `transmute` from being called on types whose size is)
Closes#14860 (Fix `quote_pat!` & parse outer attributes in `quote_item!`)
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This uncovered some dead code, most notably in middle/liveness.rs, which I think suggests there must be something fishy with that part of the code.
The #[allow(dead_code)] annotations on some of the fields I am not super happy about but as I understand, marker type may disappear at some point.
This commit moves Mutable, Map, MutableMap, Set, and MutableSet from
`core::collections` to the `collections` crate at the top-level. Additionally,
this removes the `deque` module and moves the `Deque` trait to only being
available at the top-level of the collections crate.
All functionality continues to be reexported through `std::collections`.
[breaking-change]
As part of the libstd facade efforts, this commit extracts the runtime interface
out of the standard library into a standalone crate, librustrt. This crate will
provide the following services:
* Definition of the rtio interface
* Definition of the Runtime interface
* Implementation of the Task structure
* Implementation of task-local-data
* Implementation of task failure via unwinding via libunwind
* Implementation of runtime initialization and shutdown
* Implementation of thread-local-storage for the local rust Task
Notably, this crate avoids the following services:
* Thread creation and destruction. The crate does not require the knowledge of
an OS threading system, and as a result it seemed best to leave out the
`rt::thread` module from librustrt. The librustrt module does depend on
mutexes, however.
* Implementation of backtraces. There is no inherent requirement for the runtime
to be able to generate backtraces. As will be discussed later, this
functionality continues to live in libstd rather than librustrt.
As usual, a number of architectural changes were required to make this crate
possible. Users of "stable" functionality will not be impacted by this change,
but users of the `std::rt` module will likely note the changes. A list of
architectural changes made is:
* The stdout/stderr handles no longer live directly inside of the `Task`
structure. This is a consequence of librustrt not knowing about `std::io`.
These two handles are now stored inside of task-local-data.
The handles were originally stored inside of the `Task` for perf reasons, and
TLD is not currently as fast as it could be. For comparison, 100k prints goes
from 59ms to 68ms (a 15% slowdown). This appeared to me to be an acceptable
perf loss for the successful extraction of a librustrt crate.
* The `rtio` module was forced to duplicate more functionality of `std::io`. As
the module no longer depends on `std::io`, `rtio` now defines structures such
as socket addresses, addrinfo fiddly bits, etc. The primary change made was
that `rtio` now defines its own `IoError` type. This type is distinct from
`std::io::IoError` in that it does not have an enum for what error occurred,
but rather a platform-specific error code.
The native and green libraries will be updated in later commits for this
change, and the bulk of this effort was put behind updating the two libraries
for this change (with `rtio`).
* Printing a message on task failure (along with the backtrace) continues to
live in libstd, not in librustrt. This is a consequence of the above decision
to move the stdout/stderr handles to TLD rather than inside the `Task` itself.
The unwinding API now supports registration of global callback functions which
will be invoked when a task fails, allowing for libstd to register a function
to print a message and a backtrace.
The API for registering a callback is experimental and unsafe, as the
ramifications of running code on unwinding is pretty hairy.
* The `std::unstable::mutex` module has moved to `std::rt::mutex`.
* The `std::unstable::sync` module has been moved to `std::rt::exclusive` and
the type has been rewritten to not internally have an Arc and to have an RAII
guard structure when locking. Old code should stop using `Exclusive` in favor
of the primitives in `libsync`, but if necessary, old code should port to
`Arc<Exclusive<T>>`.
* The local heap has been stripped down to have fewer debugging options. None of
these were tested, and none of these have been used in a very long time.
[breaking-change]
