mem::uninitialized: mitigate many incorrect uses of this function
Alternative to https://github.com/rust-lang/rust/pull/98966: fill memory with `0x01` rather than leaving it uninit. This is definitely bitewise valid for all `bool` and nonnull types, and also those `Option<&T>` that we started putting `noundef` on. However it is still invalid for `char` and some enums, and on references the `dereferenceable` attribute is still violated, so the generated LLVM IR still has UB -- but in fewer cases, and `dereferenceable` is hopefully less likely to cause problems than clearly incorrect range annotations.
This can make using `mem::uninitialized` a lot slower, but that function has been deprecated for years and we keep telling everyone to move to `MaybeUninit` because it is basically impossible to use `mem::uninitialized` correctly. For the cases where that hasn't helped (and all the old code out there that nobody will ever update), we can at least mitigate the effect of using this API. Note that this is *not* in any way a stable guarantee -- it is still UB to call `mem::uninitialized::<bool>()`, and Miri will call it out as such.
This is somewhat similar to https://github.com/rust-lang/rust/pull/87032, which proposed to make `uninitialized` return a buffer filled with 0x00. However
- That PR also proposed to reduce the situations in which we panic, which I don't think we should do at this time.
- The 0x01 bit pattern means that nonnull requirements are satisfied, which (due to references) is the most common validity invariant.
`@5225225` I hope I am using `cfg(sanitize)` the right way; I was not sure for which ones to test here.
Cc https://github.com/rust-lang/rust/issues/66151
Fixes https://github.com/rust-lang/rust/issues/87675
Fix slice::ChunksMut aliasing
Fixes https://github.com/rust-lang/rust/issues/94231, details in that issue.
cc `@RalfJung`
This isn't done just yet, all the safety comments are placeholders. But otherwise, it seems to work.
I don't really like this approach though. There's a lot of unsafe code where there wasn't before, but as far as I can tell the only other way to uphold the aliasing requirement imposed by `__iterator_get_unchecked` is to use raw slices, which I think require the same amount of unsafe code. All that would do is tie the `len` and `ptr` fields together.
Oh I just looked and I'm pretty sure that `ChunksExactMut`, `RChunksMut`, and `RChunksExactMut` also need to be patched. Even more reason to put up a draft.
interpret, ptr_offset_from: refactor and test too-far-apart check
We didn't have any tests for the "too far apart" message, and indeed that check mostly relied on the in-bounds check and was otherwise probably not entirely correct... so I rewrote that check, and it is before the in-bounds check so we can test it separately.
Constify a few `(Partial)Ord` impls
Only a few `impl`s are constified for now, as #92257 has not landed in the bootstrap compiler yet and quite a few impls would need that fix.
This unblocks #92228, which unblocks marking iterator methods as `default_method_body_is_const`.
miri: prune some atomic operation and raw pointer details from stacktrace
Since Miri removes `track_caller` frames from the stacktrace, adding that attribute can help make backtraces more readable (similar to how it makes panic locations better). I made them only show up with `cfg(miri)` to make sure the extra arguments induced by `track_caller` do not cause any runtime performance trouble.
This is also testing the waters for whether the libs team is okay with having these attributes in their code, or whether you'd prefer if we find some other way to do this. If you are fine with this, we will probably want to add it to a lot more functions (all the other atomic operations, to start).
Before:
```
error: Undefined Behavior: Data race detected between Atomic Load on Thread(id = 2) and Write on Thread(id = 1) at alloc1727 (current vector clock = VClock([9, 0, 6]), conflicting timestamp = VClock([0, 6]))
--> /home/r/.rustup/toolchains/miri/lib/rustlib/src/rust/library/core/src/sync/atomic.rs:2594:23
|
2594 | SeqCst => intrinsics::atomic_load_seqcst(dst),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Data race detected between Atomic Load on Thread(id = 2) and Write on Thread(id = 1) at alloc1727 (current vector clock = VClock([9, 0, 6]), conflicting timestamp = VClock([0, 6]))
|
= help: this indicates a bug in the program: it performed an invalid operation, and caused Undefined Behavior
= help: see https://doc.rust-lang.org/nightly/reference/behavior-considered-undefined.html for further information
= note: inside `std::sync::atomic::atomic_load::<usize>` at /home/r/.rustup/toolchains/miri/lib/rustlib/src/rust/library/core/src/sync/atomic.rs:2594:23
= note: inside `std::sync::atomic::AtomicUsize::load` at /home/r/.rustup/toolchains/miri/lib/rustlib/src/rust/library/core/src/sync/atomic.rs:1719:26
note: inside closure at ../miri/tests/fail/data_race/atomic_read_na_write_race1.rs:22:13
--> ../miri/tests/fail/data_race/atomic_read_na_write_race1.rs:22:13
|
22 | (&*c.0).load(Ordering::SeqCst)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
After:
```
error: Undefined Behavior: Data race detected between Atomic Load on Thread(id = 2) and Write on Thread(id = 1) at alloc1727 (current vector clock = VClock([9, 0, 6]), conflicting timestamp = VClock([0, 6]))
--> tests/fail/data_race/atomic_read_na_write_race1.rs:22:13
|
22 | (&*c.0).load(Ordering::SeqCst)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Data race detected between Atomic Load on Thread(id = 2) and Write on Thread(id = 1) at alloc1727 (current vector clock = VClock([9, 0, 6]), conflicting timestamp = VClock([0, 6]))
|
= help: this indicates a bug in the program: it performed an invalid operation, and caused Undefined Behavior
= help: see https://doc.rust-lang.org/nightly/reference/behavior-considered-undefined.html for further information
= note: inside closure at tests/fail/data_race/atomic_read_na_write_race1.rs:22:13
```
Add `[f32]::sort_floats` and `[f64]::sort_floats`
It's inconvenient to sort a slice or Vec of floats, compared to sorting integers. To simplify numeric code, add a convenience method to `[f32]` and `[f64]` to sort them using `sort_unstable_by` with `total_cmp`.
Rename `<*{mut,const} T>::as_{const,mut}` to `cast_`
This renames the methods to use the `cast_` prefix instead of `as_` to
make it more readable and avoid confusion with `<*mut T>::as_mut()`
which is `unsafe` and returns a reference.
Sorry, didn't notice ACP process exists, opened https://github.com/rust-lang/libs-team/issues/51
See #92675
make vtable pointers entirely opaque
This implements the scheme discussed in https://github.com/rust-lang/unsafe-code-guidelines/issues/338: vtable pointers should be considered entirely opaque and not even readable by Rust code, similar to function pointers.
- We have a new kind of `GlobalAlloc` that symbolically refers to a vtable.
- Miri uses that kind of allocation when generating a vtable.
- The codegen backends, upon encountering such an allocation, call `vtable_allocation` to obtain an actually dataful allocation for this vtable.
- We need new intrinsics to obtain the size and align from a vtable (for some `ptr::metadata` APIs), since direct accesses are UB now.
I had to touch quite a bit of code that I am not very familiar with, so some of this might not make much sense...
r? `@oli-obk`
This renames the methods to use the `cast_` prefix instead of `as_` to
make it more readable and avoid confusion with `<*mut T>::as_mut()`
which is `unsafe` and returns a reference.
See #92675
Improve the function pointer docs
This is #97842 but for function pointers instead of tuples. The concept is basically the same.
* Reduce duplicate impls; show `fn (T₁, T₂, …, Tₙ)` and include a sentence saying that there exists up to twelve of them.
* Show `Copy` and `Clone`.
* Show auto traits like `Send` and `Sync`, and blanket impls like `Any`.
https://notriddle.com/notriddle-rustdoc-test/std/primitive.fn.html
* Reduce duplicate impls; show only the `fn (T)` and include a sentence
saying that there exists up to twelve of them.
* Show `Copy` and `Clone`.
* Show auto traits like `Send` and `Sync`, and blanket impls like `Any`.
core::any: replace some generic types with impl Trait
This gives a cleaner API since the caller only specifies the concrete type they usually want to.
r? `@yaahc`
Fix `Skip::next` for non-fused inner iterators
`iter.skip(n).next()` will currently call `nth` and `next` in succession on `iter`, without checking whether `nth` exhausts the iterator. Using `?` to propagate a `None` value returned by `nth` avoids this.
Use split_once in FromStr docs
Current implementation:
```rust
fn from_str(s: &str) -> Result<Self, Self::Err> {
let coords: Vec<&str> = s.trim_matches(|p| p == '(' || p == ')' )
.split(',')
.collect();
let x_fromstr = coords[0].parse::<i32>()?;
let y_fromstr = coords[1].parse::<i32>()?;
Ok(Point { x: x_fromstr, y: y_fromstr })
}
```
Creating the vector is not necessary, `split_once` does the job better.
Alternatively we could also remove `trim_matches` with `strip_prefix` and `strip_suffix`:
```rust
let (x, y) = s
.strip_prefix('(')
.and_then(|s| s.strip_suffix(')'))
.and_then(|s| s.split_once(','))
.unwrap();
```
The question is how much 'correctness' is too much and distracts from the example. In a real implementation you would also not unwrap (or originally access the vector without bounds checks), but implementing a custom Error and adding a `From<ParseIntError>` and implementing the `Error` trait adds a lot of code to the example which is not relevant to the `FromStr` trait.
