Rollup of 6 pull requests
Successful merges:
- #110435 (rustdoc-json: Add test for field ordering.)
- #111891 (feat: `riscv-interrupt-{m,s}` calling conventions)
- #114377 (test_get_dbpath_for_term(): handle non-utf8 paths (fix FIXME))
- #114469 (Detect method not found on arbitrary self type with different mutability)
- #114587 (Convert Const to Allocation in smir)
- #114670 (Don't use `type_of` to determine if item has intrinsic shim)
Failed merges:
- #114599 (Add impl trait declarations to SMIR)
r? `@ghost`
`@rustbot` modify labels: rollup
Similar to prior support added for the mips430, avr, and x86 targets
this change implements the rough equivalent of clang's
[`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling
e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking
visibility into any non-assembly body of the interrupt handler, have to
be very conservative and save the [entire CPU state to the stack
frame][full-frame-save]. By instead asking LLVM to only save the
registers that it uses, we defer the decision to the tool with the best
context: it can more accurately account for the cost of spills if it
knows that every additional register used is already at the cost of an
implicit spill.
At the LLVM level, this is apparently [implemented by] marking every
register as "[callee-save]," matching the semantics of an interrupt
handler nicely (it has to leave the CPU state just as it found it after
its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes
no attempt to e.g. save the state in a user-accessible stack frame. For
a full discussion of those challenges and tradeoffs, please refer to
[the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM
does not expose the "all-saved" function flavor as a calling convention
directly, instead preferring to use an attribute that allows for
differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be
aware of the differences between machine-mode and supervisor-mode
interrupts as to why no `riscv-interrupt` calling convention is exposed
through rustc, and similarly for why `riscv-interrupt-u` makes no
appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Add a new `compare_bytes` intrinsic instead of calling `memcmp` directly
As discussed in #113435, this lets the backends be the place that can have the "don't call the function if n == 0" logic, if it's needed for the target. (I didn't actually *add* those checks, though, since as I understood it we didn't actually need them on known targets?)
Doing this also let me make it `const` (unstable), which I don't think `extern "C" fn memcmp` can be.
cc `@RalfJung` `@Amanieu`
Resurrect: rustc_target: Add alignment to indirectly-passed by-value types, correcting the alignment of byval on x86 in the process.
Same as #111551, which I [accidentally closed](https://github.com/rust-lang/rust/pull/111551#issuecomment-1571222612) :/
---
This resurrects PR #103830, which has sat idle for a while.
Beyond #103830, this also:
- fixes byval alignment for types containing vectors on Darwin (see `tests/codegen/align-byval-vector.rs`)
- fixes byval alignment for overaligned types on x86 Windows (see `tests/codegen/align-byval.rs`)
- fixes ABI for types with 128bit requested alignment on ARM64 Linux (see `tests/codegen/aarch64-struct-align-128.rs`)
r? `@nikic`
---
`@pcwalton's` original PR description is reproduced below:
Commit 88e4d2c from five years ago removed
support for alignment on indirectly-passed arguments because of problems with
the `i686-pc-windows-msvc` target. Unfortunately, the `memcpy` optimizations I
recently added to LLVM 16 depend on this to forward `memcpy`s. This commit
attempts to fix the problems with `byval` parameters on that target and now
correctly adds the `align` attribute.
The problem is summarized in [this comment] by `@eddyb.` Briefly, 32-bit x86 has
special alignment rules for `byval` parameters: for the most part, their
alignment is forced to 4. This is not well-documented anywhere but in the Clang
source. I looked at the logic in Clang `TargetInfo.cpp` and tried to replicate
it here. The relevant methods in that file are
`X86_32ABIInfo::getIndirectResult()` and
`X86_32ABIInfo::getTypeStackAlignInBytes()`. The `align` parameter attribute
for `byval` parameters in LLVM must match the platform ABI, or miscompilations
will occur. Note that this doesn't use the approach suggested by eddyb, because
I felt it was overkill to store the alignment in `on_stack` when special
handling is really only needed for 32-bit x86.
As a side effect, this should fix#80127, because it will make the `align`
parameter attribute for `byval` parameters match the platform ABI on LLVM
x86-64.
[this comment]: #80822 (comment)
It makes it sound like the `ExprKind` and `Rvalue` are supposed to represent all pointer related
casts, when in reality their just used to share a some enum variants. Make it clear there these
are only coercion to make it clear why only some pointer related "casts" are in the enum.
`lookup_debug_loc` calls `SourceMap::lookup_line`, which does a binary
search over the files, and then a binary search over the lines within
the found file. It then calls `SourceFile::line_begin_pos`, which redoes
the binary search over the lines within the found file.
This commit removes the second binary search over the lines, instead
getting the line starting pos directly using the result of the first
binary search over the lines.
(And likewise for `get_span_loc`, in the cranelift backend.)
Support #[global_allocator] without the allocator shim
This makes it possible to use liballoc/libstd in combination with `--emit obj` if you use `#[global_allocator]`. This is what rust-for-linux uses right now and systemd may use in the future. Currently they have to depend on the exact implementation of the allocator shim to create one themself as `--emit obj` doesn't create an allocator shim.
Note that currently the allocator shim also defines the oom error handler, which is normally required too. Once `#![feature(default_alloc_error_handler)]` becomes the only option, this can be avoided. In addition when using only fallible allocator methods and either `--cfg no_global_oom_handling` for liballoc (like rust-for-linux) or `--gc-sections` no references to the oom error handler will exist.
To avoid this feature being insta-stable, you will have to define `__rust_no_alloc_shim_is_unstable` to avoid linker errors.
(Labeling this with both T-compiler and T-lang as it originally involved both an implementation detail and had an insta-stable user facing change. As noted above, the `__rust_no_alloc_shim_is_unstable` symbol requirement should prevent unintended dependence on this unstable feature.)
Error message all end up passing into a function as an `impl
Into<{D,Subd}iagnosticMessage>`. If an error message is creatd as
`&format("...")` that means we allocate a string (in the `format!`
call), then take a reference, and then clone (allocating again) the
reference to produce the `{D,Subd}iagnosticMessage`, which is silly.
This commit removes the leading `&` from a lot of these cases. This
means the original `String` is moved into the
`{D,Subd}iagnosticMessage`, avoiding the double allocations. This
requires changing some function argument types from `&str` to `String`
(when all arguments are `String`) or `impl
Into<{D,Subd}iagnosticMessage>` (when some arguments are `String` and
some are `&str`).
You will need to add the following as replacement for the old __rust_*
definitions when not using the alloc shim.
#[no_mangle]
static __rust_no_alloc_shim_is_unstable: u8 = 0;
This makes it possible to use liballoc/libstd in combination with
`--emit obj` if you use `#[global_allocator]`. Making it work for the
default libstd allocator would require weak functions, which are not
well supported on all systems.
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
They're semantically the same, so this means the backends don't need to handle the intrinsic and means fewer MIR basic blocks in pointer arithmetic code.
Report allocation errors as panics
OOM is now reported as a panic but with a custom payload type (`AllocErrorPanicPayload`) which holds the layout that was passed to `handle_alloc_error`.
This should be review one commit at a time:
- The first commit adds `AllocErrorPanicPayload` and changes allocation errors to always be reported as panics.
- The second commit removes `#[alloc_error_handler]` and the `alloc_error_hook` API.
ACP: https://github.com/rust-lang/libs-team/issues/192Closes#51540Closes#51245
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Unify terminology used in unwind action and terminator, and reflect
the fact that a nounwind panic is triggered instead of an immediate
abort is triggered for this terminator.
Insert alignment checks for pointer dereferences when debug assertions are enabled
Closes https://github.com/rust-lang/rust/issues/54915
- [x] Jake tells me this sounds like a place to use `MirPatch`, but I can't figure out how to insert a new basic block with a new terminator in the middle of an existing basic block, using `MirPatch`. (if nobody else backs up this point I'm checking this as "not actually a good idea" because the code looks pretty clean to me after rearranging it a bit)
- [x] Using `CastKind::PointerExposeAddress` is definitely wrong, we don't want to expose. Calling a function to get the pointer address seems quite excessive. ~I'll see if I can add a new `CastKind`.~ `CastKind::Transmute` to the rescue!
- [x] Implement a more helpful panic message like slice bounds checking.
r? `@oli-obk`
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
Move `mir::Field` → `abi::FieldIdx`
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big-and-bitrotty already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
Since structs are always `VariantIdx(0)`, there's a bunch of files where the only reason they had `VariantIdx` or `vec::Idx` imported at all was to get the first variant.
So this uses a constant for that, and adds some doc-comments to `VariantIdx` while I'm there, since it doesn't have any today.
Updates `interpret`, `codegen_ssa`, and `codegen_cranelift` to consume the new cast instead of the intrinsic.
Includes `CastTransmute` for custom MIR building, to be able to test the extra UB.
Implement checked Shl/Shr at MIR building.
This does not require any special handling by codegen backends,
as the overflow behaviour is entirely determined by the rhs (shift amount).
This allows MIR ConstProp to remove the overflow check for constant shifts.
~There is an existing different behaviour between cg_llvm and cg_clif (cc `@bjorn3).`
I took cg_llvm's one as reference: overflow if `rhs < 0 || rhs > number_of_bits_in_lhs_ty`.~
EDIT: `cg_llvm` and `cg_clif` implement the overflow check differently. This PR uses `cg_llvm`'s implementation based on a `BitAnd` instead of `cg_clif`'s one based on an unsigned comparison.
Add `--no-undefined-version` link flag and fix associated breakage
LLVM upstream sets `--no-undefined-version` by default in lld: https://reviews.llvm.org/D135402.
Due to a bug in how version scripts are generated, this breaks the `dylib` output type for most crates. See https://github.com/rust-lang/rust/issues/105967#issuecomment-1428671533 for details.
This PR adds the flag to gcc flavor linkers in anticipation of this LLVM change rolling in, and patches `rustc` to not attempt to export `__rust_*` allocator symbols when they weren't generated.
Fixes#105967
Add `round_ties_even` to `f32` and `f64`
Tracking issue: #96710
Redux of #82273. See also #55107
Adds a new method, `round_ties_even`, to `f32` and `f64`, that rounds the float to the nearest integer , rounding halfway cases to the number with an even least significant bit. Uses the `roundeven` LLVM intrinsic to do this.
Of the five IEEE 754 rounding modes, this is the only one that doesn't already have a round-to-integer function exposed by Rust (others are `round`, `floor`, `ceil`, and `trunc`). Ties-to-even is also the rounding mode used for int-to-float and float-to-float `as` casts, as well as float arithmentic operations. So not having an explicit rounding method for it seems like an oversight.
Bikeshed: this PR currently uses `round_ties_even` for the name of the method. But maybe `round_ties_to_even` is better, or `round_even`, or `round_to_even`?
Unify validity checks into a single query
Previously, there were two queries to check whether a type allows the 0x01 or zeroed bitpattern.
I am planning on adding a further initness to check in #100423, truly uninit for MaybeUninit, which would make this three queries. This seems overkill for such a small feature, so this PR unifies them into one.
I am not entirely happy with the naming and key type and open for improvements.
r? oli-obk
(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
Previously, there were two queries to check whether a type allows the
0x01 or zeroed bitpattern.
I am planning on adding a further initness to check, truly uninit for
MaybeUninit, which would make this three queries. This seems overkill
for such a small feature, so this PR unifies them into one.
Remove type-traversal trait aliases
#107924 moved the type traversal (folding and visiting) traits into the type library, but created trait aliases in `rustc_middle` to minimise both the API churn for trait consumers and the arising boilerplate. As mentioned in that PR, an alternative approach of defining subtraits with blanket implementations of the respective supertraits was also considered at that time but was ruled out as not adding much value.
Unfortunately, it has since emerged that rust-analyzer has difficulty with these trait aliases at present, resulting in a degraded contributor experience (see the recent [r-a has become useless](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/r-a.20has.20become.20useless) topic on the #t-compiler/help Zulip stream).
This PR removes the trait aliases, and accordingly the underlying type library traits are now used directly; they are parameterised by `TyCtxt<'tcx>` rather than just the `'tcx` lifetime, and imports have been updated to reflect the fact that the trait aliases' explicitly named traits are no longer automatically brought into scope. These changes also roll-back the (no-longer required) workarounds to #107747 that were made in b409329c62.
Since this PR is just a find+replace together with the changes necessary for compilation & tidy to pass, it's currently just one mega-commit. Let me know if you'd like it broken up.
r? `@oli-obk`
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
There are several `mk_foo`/`intern_foo` pairs, where the former takes an
iterator and the latter takes a slice. (This naming convention is bad,
but that's a fix for another PR.)
This commit changes several `mk_foo` occurrences into `intern_foo`,
avoiding the need for some `.iter()`/`.into_iter()` calls. Affected
cases:
- mk_type_list
- mk_tup
- mk_substs
- mk_const_list
Don't ICE in `might_permit_raw_init` if reference is polymorphic
Emitting optimized MIR for a polymorphic function may require computing layout of a type that isn't (yet) known. This happens in the instcombine pass, for example. Let's fail gracefully in that condition.
cc `@saethlin`
fixes#107999
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
Sync rustc_codegen_cranelift
For cg_clif itself there have been a couple of bug fixes since the last sync, a Cranelift update and implemented all remaining simd platform intrinsics used by `std::simd`. (`std::arch` still misses a lot though) Most of the diff is from reworking of the cg_clif build system though.
r? `@ghost`
`@rustbot` label +A-codegen +A-cranelift +T-compiler
Rollup of 11 pull requests
Successful merges:
- #106407 (Improve proc macro attribute diagnostics)
- #106960 (Teach parser to understand fake anonymous enum syntax)
- #107085 (Custom MIR: Support binary and unary operations)
- #107086 (Print PID holding bootstrap build lock on Linux)
- #107175 (Fix escaping inference var ICE in `point_at_expr_source_of_inferred_type`)
- #107204 (suggest qualifying bare associated constants)
- #107248 (abi: add AddressSpace field to Primitive::Pointer )
- #107272 (Implement ObjectSafe and WF in the new solver)
- #107285 (Implement `Generator` and `Future` in the new solver)
- #107286 (ICE in new solver if we see an inference variable)
- #107313 (Add Style Team Triagebot config)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
InstCombine away intrinsic validity assertions
This optimization (currently) fires 246 times on the standard library. It seems to fire hardly at all on the big crates in the benchmark suite. Interesting.
...and remove it from `PointeeInfo`, which isn't meant for this.
There are still various places (marked with FIXMEs) that assume all pointers
have the same size and alignment. Fixing this requires parsing non-default
address spaces in the data layout string, which will be done in a followup.
Various cleanups around pre-TyCtxt queries and functions
part of #105462
based on https://github.com/rust-lang/rust/pull/106776 (everything starting at [0e2b39f](0e2b39fd1f) is new in this PR)
r? `@petrochenkov`
I think this should be most of the uncontroversial part of #105462.
Rename `assert_uninit_valid` intrinsic
It's not about "uninit" anymore but about "filling with 0x01 bytes" so the name should at least try to reflect that.
This is actually not fully correct though, as it does still panic for all uninit with `-Zstrict-init-checks`. I'm not sure what the best way is to deal with that not causing confusion. I guess we could just remove the flag? I don't think having it makes a lot of sense anymore with the direction that we have chose to go. It could be relevant again if #100423 lands so removing it may be a bit over eager.
r? `@RalfJung`
Use rint intrinsic instead of roundeven to impement `round_ties_even`. They do the same thing when rounding mode is default, which Rust assumes.
And `rint` has better platform support.
Keeps `roundeven` around in `core::intrinsics`, it's doing no harm there.
Use `as_deref` in compiler (but only where it makes sense)
This simplifies some code :3
(there are some changes that are not exacly `as_deref`, but more like "clever `Option`/`Result` method use")
deduplicate constant evaluation in cranelift backend
The cranelift backend had two matches on `ConstantKind`, which can be avoided, and used this `eval_for_mir` that nothing else uses... this makes things more consistent with the (better-tested) LLVM backend.
I noticed this because cranelift was the only user of `eval_for_mir`. However `try_eval_for_mir` still has one other user in `eval`... the odd thing is that the interpreter has its own `eval_mir_constant` which seems to duplicate the same functionality and does not use `try_eval_for_mir`. No idea what is happening here.
r? ``@bjorn3``
Cc ``@lcnr``
Improve generating Custom entry function
This commit is aimed at making compiler-generated entry functions (Basically just C `main` right now) more generic so other targets can do similar things for custom entry. This was initially implemented as part of https://github.com/rust-lang/rust/pull/100316.
Currently, this moves the entry function name and Call convention to the target spec.
Signed-off-by: Ayush Singh <ayushsingh1325@gmail.com>
interpret: support for per-byte provenance
Also factors the provenance map into its own module.
The third commit does the same for the init mask. I can move it in a separate PR if you prefer.
Fixes https://github.com/rust-lang/miri/issues/2181
r? `@oli-obk`
Previously, rustdoc would unconditionally report the version that *rustc* was compiled with.
That showed things like `nightly-2022-10-30`, which wasn't right, since this was a `dev` build compiled from source.
Fix it by changing `rustc_driver::version` to a macro expanded at invocation time.
The new implementation doesn't use weak lang items and instead changes
`#[alloc_error_handler]` to an attribute macro just like
`#[global_allocator]`.
The attribute will generate the `__rg_oom` function which is called by
the compiler-generated `__rust_alloc_error_handler`. If no `__rg_oom`
function is defined in any crate then the compiler shim will call
`__rdl_oom` in the alloc crate which will simply panic.
This also fixes link errors with `-C link-dead-code` with
`default_alloc_error_handler`: `__rg_oom` was previously defined in the
alloc crate and would attempt to reference the `oom` lang item, even if
it didn't exist. This worked as long as `__rg_oom` was excluded from
linking since it was not called.
This is a prerequisite for the stabilization of
`default_alloc_error_handler` (#102318).
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
ssa: implement `#[collapse_debuginfo]`
cc #39153rust-lang/compiler-team#386
Debuginfo line information for macro invocations are collapsed by default - line information are replaced by the line of the outermost expansion site. Using `-Zdebug-macros` disables this behaviour.
When the `collapse_debuginfo` feature is enabled, the default behaviour is reversed so that debuginfo is not collapsed by default. In addition, the `#[collapse_debuginfo]` attribute is available and can be applied to macro definitions which will then have their line information collapsed.
r? rust-lang/wg-debugging
The `<*const T>::guaranteed_*` methods now return an option for the unknown case
cc https://github.com/rust-lang/rust/issues/53020#issuecomment-1236932443
I chose `0` for "not equal" and `1` for "equal" and left `2` for the unknown case so backends can just forward to raw pointer equality and it works ✨
r? `@fee1-dead` or `@lcnr`
cc `@rust-lang/wg-const-eval`
Debuginfo line information for macro invocations are collapsed by
default - line information are replaced by the line of the outermost
expansion site. Using `-Zdebug-macros` disables this behaviour.
When the `collapse_debuginfo` feature is enabled, the default behaviour
is reversed so that debuginfo is not collapsed by default. In addition,
the `#[collapse_debuginfo]` attribute is available and can be applied to
macro definitions which will then have their line information collapsed.
Signed-off-by: David Wood <david.wood@huawei.com>
Support `#[unix_sigpipe = "inherit|sig_dfl"]` on `fn main()` to prevent ignoring `SIGPIPE`
When enabled, programs don't have to explicitly handle `ErrorKind::BrokenPipe` any longer. Currently, the program
```rust
fn main() { loop { println!("hello world"); } }
```
will print an error if used with a short-lived pipe, e.g.
% ./main | head -n 1
hello world
thread 'main' panicked at 'failed printing to stdout: Broken pipe (os error 32)', library/std/src/io/stdio.rs:1016:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
by enabling `#[unix_sigpipe = "sig_dfl"]` like this
```rust
#![feature(unix_sigpipe)]
#[unix_sigpipe = "sig_dfl"]
fn main() { loop { println!("hello world"); } }
```
there is no error, because `SIGPIPE` will not be ignored and thus the program will be killed appropriately:
% ./main | head -n 1
hello world
The current libstd behaviour of ignoring `SIGPIPE` before `fn main()` can be explicitly requested by using `#[unix_sigpipe = "sig_ign"]`.
With `#[unix_sigpipe = "inherit"]`, no change at all is made to `SIGPIPE`, which typically means the behaviour will be the same as `#[unix_sigpipe = "sig_dfl"]`.
See https://github.com/rust-lang/rust/issues/62569 and referenced issues for discussions regarding the `SIGPIPE` problem itself
See the [this](https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Proposal.3A.20First.20step.20towards.20solving.20the.20SIGPIPE.20problem) Zulip topic for more discussions, including about this PR.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Migrate rustc_monomorphize to use SessionDiagnostic
### Description
- Migrates diagnostics in `rustc_monomorphize` to use `SessionDiagnostic`
- Adds an `impl IntoDiagnosticArg for PathBuf`
### TODO / Help!
- [x] I'm having trouble figuring out how to apply an optional note. 😕 Help!?
- Resolved. It was bad docs. Fixed in https://github.com/rust-lang/rustc-dev-guide/pull/1437/files
- [x] `errors:RecursionLimit` should be `#[fatal ...]`, but that doesn't exist so it's `#[error ...]` at the moment.
- Maybe I can switch after this is merged in? --> https://github.com/rust-lang/rust/pull/100694
- Or maybe I need to manually implement `SessionDiagnostic` instead of deriving it?
- [x] How does one go about converting an error inside of [a call to struct_span_lint_hir](8064a49508/compiler/rustc_monomorphize/src/collector.rs (L917-L927))?
- [x] ~What placeholder do you use in the fluent template to refer to the value in a vector? It seems like [this code](0b79f758c9/compiler/rustc_macros/src/diagnostics/diagnostic_builder.rs (L83-L114)) ought to have the answer (or something near it)...but I can't figure it out.~ You can't. Punted.
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
interpret: make read-pointer-as-bytes a CTFE-only error with extra information
Next step in the reaction to https://github.com/rust-lang/rust/issues/99923. Also teaches Miri to implicitly strip provenance in more situations when transmuting pointers to integers, which fixes https://github.com/rust-lang/miri/issues/2456.
Pointer-to-int transmutation during CTFE now produces a message like this:
```
= help: this code performed an operation that depends on the underlying bytes representing a pointer
= help: the absolute address of a pointer is not known at compile-time, so such operations are not supported
```
r? ``@oli-obk``
Replace `Body::basic_blocks()` with field access
Since the refactoring in #98930, it is possible to borrow the basic blocks
independently from other parts of MIR by accessing the `basic_blocks` field
directly.
Replace unnecessary `Body::basic_blocks()` method with a direct field access,
which has an additional benefit of borrowing the basic blocks only.
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
Add pointer masking convenience functions
This PR adds the following public API:
```rust
impl<T: ?Sized> *const T {
fn mask(self, mask: usize) -> *const T;
}
impl<T: ?Sized> *mut T {
fn mask(self, mask: usize) -> *const T;
}
// mod intrinsics
fn mask<T>(ptr: *const T, mask: usize) -> *const T
```
This is equivalent to `ptr.map_addr(|a| a & mask)` but also uses a cool llvm intrinsic.
Proposed in https://github.com/rust-lang/rust/pull/95643#issuecomment-1121562352
cc `@Gankra` `@scottmcm` `@RalfJung`
r? rust-lang/libs-api
Because `PassMode::Cast` is by far the largest variant, but is
relatively rare.
This requires making `PassMode` not impl `Copy`, and `Clone` is no
longer necessary. This causes lots of sigil adjusting, but nothing very
notable.
This commit adds the following functions all of which have a signature
`pointer, usize -> pointer`:
- `<*mut T>::mask`
- `<*const T>::mask`
- `intrinsics::ptr_mask`
These functions are equivalent to `.map_addr(|a| a & mask)` but they
utilize `llvm.ptrmask` llvm intrinsic.
*masks your pointers*
This avoids monomorphizing all linker code for each codegen backend and
will allow passing in extra information to the archive builder from the
codegen backend.
Enable raw-dylib for bin crates
Fixes#93842
When `raw-dylib` is used in a `bin` crate, we need to collect all of the `raw-dylib` functions, generate the import library and add that to the linker command line.
I also changed the tests so that 1) the C++ dlls are created after the Rust dlls, thus there is no chance of accidentally using them in the Rust linking process and 2) disabled generating import libraries when building with MSVC.
