We're going to have more modules under lint, and the paths get unwieldy. We
also plan to have lints run at multiple points in the compilation pipeline.
This is just a cleanup of the code. Doesn't really change anything deep about the way we operate. This is a prelude to implementing a good solution for one-way matching for #5527.
r? @pnkfelix (we were just crawling about this code, after all)
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
Use ty_rptr/ty_uniq(ty_trait) rather than TraitStore to represent trait types.
Also addresses (but doesn't close) #12470.
Part of the work towards DST (#12938).
[breaking-change] lifetime parameters in `&mut trait` are now invariant. They used to be contravariant.
only known post-monomorphization, and report `transmute` errors before
the code is generated for that `transmute`.
This can break code that looked like:
unsafe fn f<T>(x: T) {
let y: int = transmute(x);
}
Change such code to take a type parameter that has the same size as the
type being transmuted to.
Closes#12898.
[breaking-change]
This commit fixes a bug in the calculation of the hash of a type which didn't
factor in the length of a constant-sized vector. As a result of this, a type
placed into an Any of a fixed length could be peeled out with any other fixed
length in a safe manner.
parameters
This involves numerous substeps:
1. Treat Self same as any other parameter.
2. No longer compute offsets for method parameters.
3. Store all generic types (both trait/impl and method) with a method,
eliminating odd discrepancies.
4. Stop doing unspeakable things to static methods and instead just use
the natural types, now that we can easily add the type parameters from
trait into the method's polytype.
5. No doubt some more. It was hard to separate these into distinct commits.
Fixes#13564
* The select/plural methods from format strings are removed
* The # character no longer needs to be escaped
* The \-based escapes have been removed
* '{{' is now an escape for '{'
* '}}' is now an escape for '}'
Closes#14810
[breaking-change]
Adds the option -Zsave-analysis which will dump the results of syntax and type checking into CSV files. These can be interpreted by tools such as DXR to provide semantic information about Rust programs for code search, cross-reference, etc.
Authored by Nick Cameron and Peter Elmers (@pelmers; including enums, type parameters/generics).
* The select/plural methods from format strings are removed
* The # character no longer needs to be escaped
* The \-based escapes have been removed
* '{{' is now an escape for '{'
* '}}' is now an escape for '}'
Closes#14810
[breaking-change]
This commit uses the same trick as ~/Box to map Gc<T> to @T internally inside
the compiler. This moves a number of implementations of traits to the `gc`
module in the standard library.
This removes functions such as `Gc::new`, `Gc::borrow`, and `Gc::ptr_eq` in
favor of the more modern equivalents, `box(GC)`, `Deref`, and pointer equality.
The Gc pointer itself should be much more useful now, and subsequent commits
will move the compiler away from @T towards Gc<T>
[breaking-change]
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
It can be easy to accidentally bloat the size of an enum by making one variant
larger than the others. When this happens, it usually goes unnoticed. This
commit adds a lint that can warn when the largest variant in an enum is more
than 3 times larger than the second-largest variant. This requires a little
bit of rejiggering, because size information is only available in trans, but
lint levels are only available in the lint context.
It is allow by default because it's pretty noisy, and isn't really *that*
undesirable.
Closes#10362
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
ty::substs struct. This is a holdover from the olden days of yore. This patch
removes the last vestiges of that practice. This is part of the work
I was doing on #5527.
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
Pre-step towards issue #12624 and others: Introduce ExprUseVisitor, remove the
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
r? @alexcrichton
