Stabilize `peekable_peek_mut`
Resolves#78302. Also adds some documentation on `std::iter::Iterator::peekable()` regarding the new method.
The feature was added in #77491 in Nov' 20, which is recently, but the feature seems reasonably small. Never did a stabilization-pr, excuse my ignorance if there is a protocol I'm not aware of.
Stabilize cmp_min_max_by
I would like to propose cmp::{min_by, min_by_key, max_by, max_by_key}
for stabilization.
These are relatively simple and seemingly uncontroversial functions and
have been unchanged in unstable for a while now.
Closes: #64460
I would like to propose cmp::{min_by, min_by_key, max_by, max_by_key}
for stabilization.
These are relatively simple and seemingly uncontroversial functions and
have been unchanged in unstable for a while now.
Add IEEE 754 compliant fmt/parse of -0, infinity, NaN
This pull request improves the Rust float formatting/parsing libraries to comply with IEEE 754's formatting expectations around certain special values, namely signed zero, the infinities, and NaN. It also adds IEEE 754 compliance tests that, while less stringent in certain places than many of the existing flt2dec/dec2flt capability tests, are intended to serve as the beginning of a roadmap to future compliance with the standard. Some relevant documentation is also adjusted with clarifying remarks.
This PR follows from discussion in https://github.com/rust-lang/rfcs/issues/1074, and closes#24623.
The most controversial change here is likely to be that -0 is now printed as -0. Allow me to explain: While there appears to be community support for an opt-in toggle of printing floats as if they exist in the naively expected domain of numbers, i.e. not the extended reals (where floats live), IEEE 754-2019 is clear that a float converted to a string should be capable of being transformed into the original floating point bit-pattern when it satisfies certain conditions (namely, when it is an actual numeric value i.e. not a NaN and the original and destination float width are the same). -0 is given special attention here as a value that should have its sign preserved. In addition, the vast majority of other programming languages not only output `-0` but output `-0.0` here.
While IEEE 754 offers a broad leeway in how to handle producing what it calls a "decimal character sequence", it is clear that the operations a language provides should be capable of round tripping, and it is confusing to advertise the f32 and f64 types as binary32 and binary64 yet have the most basic way of producing a string and then reading it back into a floating point number be non-conformant with the standard. Further, existing documentation suggested that e.g. -0 would be printed with -0 regardless of the presence of the `+` fmt character, but it prints "+0" instead if given such (which was what led to the opening of #24623).
There are other parsing and formatting issues for floating point numbers which prevent Rust from complying with the standard, as well as other well-documented challenges on the arithmetic level, but I hope that this can be the beginning of motion towards solving those challenges.
Add Result::into_err where the Ok variant is the never type
Equivalent of #66045 but for the inverse situation where `T: Into<!>` rather than `E: Into<!>`.
I'm using the same feature gate name. I can't see why one of these methods would be OK to stabilize but not the other.
Tracking issue: #61695
Remove Option::{unwrap_none, expect_none}.
This removes `Option::unwrap_none` and `Option::expect_none` since we're not going to stabilize them, see https://github.com/rust-lang/rust/issues/62633.
Closes#62633
This commit removes the previous mechanism of differentiating
between "Debug" and "Display" formattings for the sign of -0 so as
to comply with the IEEE 754 standard's requirements on external
character sequences preserving various attributes of a floating
point representation.
In addition, numerous tests are fixed.
Stabilize `unsafe_op_in_unsafe_fn` lint
This makes it possible to override the level of the `unsafe_op_in_unsafe_fn`, as proposed in https://github.com/rust-lang/rust/issues/71668#issuecomment-729770896.
Tracking issue: #71668
r? ```@nikomatsakis``` cc ```@SimonSapin``` ```@RalfJung```
# Stabilization report
This is a stabilization report for `#![feature(unsafe_block_in_unsafe_fn)]`.
## Summary
Currently, the body of unsafe functions is an unsafe block, i.e. you can perform unsafe operations inside.
The `unsafe_op_in_unsafe_fn` lint, stabilized here, can be used to change this behavior, so performing unsafe operations in unsafe functions requires an unsafe block.
For now, the lint is allow-by-default, which means that this PR does not change anything without overriding the lint level.
For more information, see [RFC 2585](https://github.com/rust-lang/rfcs/blob/master/text/2585-unsafe-block-in-unsafe-fn.md)
### Example
```rust
// An `unsafe fn` for demonstration purposes.
// Calling this is an unsafe operation.
unsafe fn unsf() {}
// #[allow(unsafe_op_in_unsafe_fn)] by default,
// the behavior of `unsafe fn` is unchanged
unsafe fn allowed() {
// Here, no `unsafe` block is needed to
// perform unsafe operations...
unsf();
// ...and any `unsafe` block is considered
// unused and is warned on by the compiler.
unsafe {
unsf();
}
}
#[warn(unsafe_op_in_unsafe_fn)]
unsafe fn warned() {
// Removing this `unsafe` block will
// cause the compiler to emit a warning.
// (Also, no "unused unsafe" warning will be emitted here.)
unsafe {
unsf();
}
}
#[deny(unsafe_op_in_unsafe_fn)]
unsafe fn denied() {
// Removing this `unsafe` block will
// cause a compilation error.
// (Also, no "unused unsafe" warning will be emitted here.)
unsafe {
unsf();
}
}
```
Prevent specialized ZipImpl from calling `__iterator_get_unchecked` twice with the same index
Fixes#82291
It's open for review, but conflicts with #82289, wait before merging. The conflict involves only the new test, so it should be rather trivial to fix.
Improve slice.binary_search_by()'s best-case performance to O(1)
This PR aimed to improve the [slice.binary_search_by()](https://doc.rust-lang.org/std/primitive.slice.html#method.binary_search_by)'s best-case performance to O(1).
# Noticed
I don't know why the docs of `binary_search_by` said `"If there are multiple matches, then any one of the matches could be returned."`, but the implementation isn't the same thing. Actually, it returns the **last one** if multiple matches found.
Then we got two options:
## If returns the last one is the correct or desired result
Then I can rectify the docs and revert my changes.
## If the docs are correct or desired result
Then my changes can be merged after fully reviewed.
However, if my PR gets merged, another issue raised: this could be a **breaking change** since if multiple matches found, the returning order no longer the last one instead of it could be any one.
For example:
```rust
let mut s = vec![0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];
let num = 1;
let idx = s.binary_search(&num);
s.insert(idx, 2);
// Old implementations
assert_eq!(s, [0, 1, 1, 1, 1, 2, 2, 3, 5, 8, 13, 21, 34, 42, 55]);
// New implementations
assert_eq!(s, [0, 1, 1, 1, 2, 1, 2, 3, 5, 8, 13, 21, 34, 42, 55]);
```
# Benchmarking
**Old implementations**
```sh
$ ./x.py bench --stage 1 library/libcore
test slice::binary_search_l1 ... bench: 59 ns/iter (+/- 4)
test slice::binary_search_l1_with_dups ... bench: 59 ns/iter (+/- 3)
test slice::binary_search_l2 ... bench: 76 ns/iter (+/- 5)
test slice::binary_search_l2_with_dups ... bench: 77 ns/iter (+/- 17)
test slice::binary_search_l3 ... bench: 183 ns/iter (+/- 23)
test slice::binary_search_l3_with_dups ... bench: 185 ns/iter (+/- 19)
```
**New implementations (1)**
Implemented by this PR.
```rust
if cmp == Equal {
return Ok(mid);
} else if cmp == Less {
base = mid
}
```
```sh
$ ./x.py bench --stage 1 library/libcore
test slice::binary_search_l1 ... bench: 58 ns/iter (+/- 2)
test slice::binary_search_l1_with_dups ... bench: 37 ns/iter (+/- 4)
test slice::binary_search_l2 ... bench: 76 ns/iter (+/- 3)
test slice::binary_search_l2_with_dups ... bench: 57 ns/iter (+/- 6)
test slice::binary_search_l3 ... bench: 200 ns/iter (+/- 30)
test slice::binary_search_l3_with_dups ... bench: 157 ns/iter (+/- 6)
$ ./x.py bench --stage 1 library/libcore
test slice::binary_search_l1 ... bench: 59 ns/iter (+/- 8)
test slice::binary_search_l1_with_dups ... bench: 37 ns/iter (+/- 2)
test slice::binary_search_l2 ... bench: 77 ns/iter (+/- 2)
test slice::binary_search_l2_with_dups ... bench: 57 ns/iter (+/- 2)
test slice::binary_search_l3 ... bench: 198 ns/iter (+/- 21)
test slice::binary_search_l3_with_dups ... bench: 158 ns/iter (+/- 11)
```
**New implementations (2)**
Suggested by `@nbdd0121` in [comment](https://github.com/rust-lang/rust/pull/74024#issuecomment-665430239).
```rust
base = if cmp == Greater { base } else { mid };
if cmp == Equal { break }
```
```sh
$ ./x.py bench --stage 1 library/libcore
test slice::binary_search_l1 ... bench: 59 ns/iter (+/- 7)
test slice::binary_search_l1_with_dups ... bench: 37 ns/iter (+/- 5)
test slice::binary_search_l2 ... bench: 75 ns/iter (+/- 3)
test slice::binary_search_l2_with_dups ... bench: 56 ns/iter (+/- 3)
test slice::binary_search_l3 ... bench: 195 ns/iter (+/- 15)
test slice::binary_search_l3_with_dups ... bench: 151 ns/iter (+/- 7)
$ ./x.py bench --stage 1 library/libcore
test slice::binary_search_l1 ... bench: 57 ns/iter (+/- 2)
test slice::binary_search_l1_with_dups ... bench: 38 ns/iter (+/- 2)
test slice::binary_search_l2 ... bench: 77 ns/iter (+/- 11)
test slice::binary_search_l2_with_dups ... bench: 57 ns/iter (+/- 4)
test slice::binary_search_l3 ... bench: 194 ns/iter (+/- 15)
test slice::binary_search_l3_with_dups ... bench: 151 ns/iter (+/- 18)
```
I run some benchmarking testings against on two implementations. The new implementation has a lot of improvement in duplicates cases, while in `binary_search_l3` case, it's a little bit slower than the old one.
Implement NOOP_METHOD_CALL lint
Implements the beginnings of https://github.com/rust-lang/lang-team/issues/67 - a lint for detecting noop method calls (e.g, calling `<&T as Clone>::clone()` when `T: !Clone`).
This PR does not fully realize the vision and has a few limitations that need to be addressed either before merging or in subsequent PRs:
* [ ] No UFCS support
* [ ] The warning message is pretty plain
* [ ] Doesn't work for `ToOwned`
The implementation uses [`Instance::resolve`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/instance/struct.Instance.html#method.resolve) which is normally later in the compiler. It seems that there are some invariants that this function relies on that we try our best to respect. For instance, it expects substitutions to have happened, which haven't yet performed, but we check first for `needs_subst` to ensure we're dealing with a monomorphic type.
Thank you to ```@davidtwco,``` ```@Aaron1011,``` and ```@wesleywiser``` for helping me at various points through out this PR ❤️.
Make ptr::write const
~~The code in this PR as of right now is not much more than an experiment.~~
~~This should, if I am not mistaken, in theory compile and pass the tests once the bootstraping compiler is updated. Thus the PR is blocked on that which should happen some time after the February the 9th. Also we might want to wait for #79989 to avoid regressing performance due to using `mem::forget` over `intrinsics::forget`~~.
Add tests for Atomic*::fetch_{min,max}
This ensures that all atomic operations except for fences are tested. This has been useful to test my work on using atomic instructions for atomic operations in cg_clif instead of a global lock.
Implement RFC 2580: Pointer metadata & VTable
RFC: https://github.com/rust-lang/rfcs/pull/2580
~~Before merging this PR:~~
* [x] Wait for the end of the RFC’s [FCP to merge](https://github.com/rust-lang/rfcs/pull/2580#issuecomment-759145278).
* [x] Open a tracking issue: https://github.com/rust-lang/rust/issues/81513
* [x] Update `#[unstable]` attributes in the PR with the tracking issue number
----
This PR extends the language with a new lang item for the `Pointee` trait which is special-cased in trait resolution to implement it for all types. Even in generic contexts, parameters can be assumed to implement it without a corresponding bound.
For this I mostly imitated what the compiler was already doing for the `DiscriminantKind` trait. I’m very unfamiliar with compiler internals, so careful review is appreciated.
This PR also extends the standard library with new unstable APIs in `core::ptr` and `std::ptr`:
```rust
pub trait Pointee {
/// One of `()`, `usize`, or `DynMetadata<dyn SomeTrait>`
type Metadata: Copy + Send + Sync + Ord + Hash + Unpin;
}
pub trait Thin = Pointee<Metadata = ()>;
pub const fn metadata<T: ?Sized>(ptr: *const T) -> <T as Pointee>::Metadata {}
pub const fn from_raw_parts<T: ?Sized>(*const (), <T as Pointee>::Metadata) -> *const T {}
pub const fn from_raw_parts_mut<T: ?Sized>(*mut (),<T as Pointee>::Metadata) -> *mut T {}
impl<T: ?Sized> NonNull<T> {
pub const fn from_raw_parts(NonNull<()>, <T as Pointee>::Metadata) -> NonNull<T> {}
/// Convenience for `(ptr.cast(), metadata(ptr))`
pub const fn to_raw_parts(self) -> (NonNull<()>, <T as Pointee>::Metadata) {}
}
impl<T: ?Sized> *const T {
pub const fn to_raw_parts(self) -> (*const (), <T as Pointee>::Metadata) {}
}
impl<T: ?Sized> *mut T {
pub const fn to_raw_parts(self) -> (*mut (), <T as Pointee>::Metadata) {}
}
/// `<dyn SomeTrait as Pointee>::Metadata == DynMetadata<dyn SomeTrait>`
pub struct DynMetadata<Dyn: ?Sized> {
// Private pointer to vtable
}
impl<Dyn: ?Sized> DynMetadata<Dyn> {
pub fn size_of(self) -> usize {}
pub fn align_of(self) -> usize {}
pub fn layout(self) -> crate::alloc::Layout {}
}
unsafe impl<Dyn: ?Sized> Send for DynMetadata<Dyn> {}
unsafe impl<Dyn: ?Sized> Sync for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Debug for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Unpin for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Copy for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Clone for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Eq for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> PartialEq for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Ord for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> PartialOrd for DynMetadata<Dyn> {}
impl<Dyn: ?Sized> Hash for DynMetadata<Dyn> {}
```
API differences from the RFC, in areas noted as unresolved questions in the RFC:
* Module-level functions instead of associated `from_raw_parts` functions on `*const T` and `*mut T`, following the precedent of `null`, `slice_from_raw_parts`, etc.
* Added `to_raw_parts`
The use of module-level functions instead of associated functions
on `<*const T>` or `<*mut T>` follows the precedent of
`ptr::slice_from_raw_parts` and `ptr::slice_from_raw_parts_mut`.
Stabilize by-value `[T; N]` iterator `core::array::IntoIter`
Tracking issue: https://github.com/rust-lang/rust/issues/65798
This is unblocked now that `min_const_generics` has been stabilized in https://github.com/rust-lang/rust/pull/79135.
This PR does *not* include the corresponding `IntoIterator` impl, which is https://github.com/rust-lang/rust/pull/65819. Instead, an iterator can be constructed through the `new` method.
`new` would become unnecessary when `IntoIterator` is implemented and might be deprecated then, although it will stay stable.
Add `unwrap_unchecked()` methods for `Option` and `Result`
In particular:
- `unwrap_unchecked()` for `Option`.
- `unwrap_unchecked()` and `unwrap_err_unchecked()` for `Result`.
These complement other `*_unchecked()` methods in `core` etc.
Currently there are a couple of places it may be used inside rustc (`LinkedList`, `BTree`). It is also easy to find other repositories with similar functionality.
Fixes#48278.
TrustedRandomAaccess specialization composes incorrectly for nested iter::Zips
I found this while working on improvements for TRA.
After partially consuming a Zip adapter and then wrapping it into another Zip where the adapters use their `TrustedRandomAccess` specializations leads to the outer adapter returning elements which should have already been consumed.
If the optimizer gets tripped up by the addition this might affect performance for chained `zip()` iterators even when the inner one is not partially advanced but it would require more extensive fixes to `TrustedRandomAccess` to communicate those offsets earlier.
Included test fails on nightly, [playground link](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2018&gist=24fa1edf8a104ff31f5a24830593b01f)
Add Iterator::intersperse_with
This is a follow-up to #79479, tracking in #79524, as discussed https://github.com/rust-lang/rust/pull/79479#issuecomment-752671731.
~~Note that I had to manually implement `Clone` and `Debug` because `derive` insists on placing a `Clone`-bound on the struct-definition, which is too narrow. There is a long-standing issue # for this somewhere around here :-)~~
Also, note that I refactored the guts of `Intersperse` into private functions and re-used them in `IntersperseWith`, so I also went light on duplicating all the tests.
If this is suitable to be merged, the tracking issue should be updated, since it only mentions `intersperse`.
Happy New Year!
r? ``@m-ou-se``
These tests invoke the various op traits using all accepted types they
are implemented for as well as for references to those types.
This fixes#49660 and ensures the following implementations exist:
* `Add`, `Sub`, `Mul`, `Div`, `Rem`
* `T op T`, `T op &T`, `&T op T` and `&T op &T`
* for all integer and floating point types
* `AddAssign`, `SubAssign`, `MulAssign`, `DivAssign`, `RemAssign`
* `&mut T op T` and `&mut T op &T`
* for all integer and floating point types
* `Neg`
* `op T` and `op &T`
* for all signed integer and floating point types
* `Not`
* `op T` and `op &T`
* for `bool`
* `BitAnd`, `BitOr`, `BitXor`
* `T op T`, `T op &T`, `&T op T` and `&T op &T`
* for all integer types and bool
* `BitAndAssign`, `BitOrAssign`, `BitXorAssign`
* `&mut T op T` and `&mut T op &T`
* for all integer types and bool
* `Shl`, `Shr`
* `L op R`, `L op &R`, `&L op R` and `&L op &R`
* for all pairs of integer types
* `ShlAssign`, `ShrAssign`
* `&mut L op R`, `&mut L op &R`
* for all pairs of integer types
In particular:
- `unwrap_unchecked()` for `Option`.
- `unwrap_unchecked()` and `unwrap_err_unchecked()` for `Result`.
These complement other `*_unchecked()` methods in `core` etc.
Currently there are a couple of places it may be used inside rustc
(`LinkedList`, `BTree`). It is also easy to find other repositories
with similar functionality.
Fixes#48278.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
After partially consuming a Zip adapter and then wrapping it into
another Zip where the adapters use their TrustedRandomAccess specializations
leads to the outer adapter returning elements which should have already been
consumed.
The return of the GroupBy and GroupByMut iterators on slice
According to https://github.com/rust-lang/rfcs/pull/2477#issuecomment-742034372, I am opening this PR again, this time I implemented it in safe Rust only, it is therefore much easier to read and is completely safe.
This PR proposes to add two new methods to the slice, the `group_by` and `group_by_mut`. These two methods provide a way to iterate over non-overlapping sub-slices of a base slice that are separated by the predicate given by the user (e.g. `Partial::eq`, `|a, b| a.abs() < b.abs()`).
```rust
let slice = &[1, 1, 1, 3, 3, 2, 2, 2];
let mut iter = slice.group_by(|a, b| a == b);
assert_eq!(iter.next(), Some(&[1, 1, 1][..]));
assert_eq!(iter.next(), Some(&[3, 3][..]));
assert_eq!(iter.next(), Some(&[2, 2, 2][..]));
assert_eq!(iter.next(), None);
```
[An RFC](https://github.com/rust-lang/rfcs/pull/2477) was open 2 years ago but wasn't necessary.
Rollup of 9 pull requests
Successful merges:
- #78934 (refactor: removing library/alloc/src/vec/mod.rs ignore-tidy-filelength)
- #79479 (Add `Iterator::intersperse`)
- #80128 (Edit rustc_ast::ast::FieldPat docs)
- #80424 (Don't give an error when creating a file for the first time)
- #80458 (Some Promotion Refactoring)
- #80488 (Do not create dangling &T in Weak<T>::drop)
- #80491 (Miri: make size/align_of_val work for dangling raw ptrs)
- #80495 (Rename kw::Invalid -> kw::Empty)
- #80513 (Add regression test for #80062)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add `impl Div<NonZeroU{0}> for u{0}` which cannot panic
Dividing an unsigned int by a `NonZeroUxx` requires a user to write (for example, in [this SO question](https://stackoverflow.com/questions/64855738/how-to-inform-the-optimizer-that-nonzerou32get-will-never-return-zero)):
```
pub fn safe_div(x: u32, y: std::num::NonZeroU32) -> u32 {
x / y.get()
}
```
which generates a panicking-checked-div [assembly](https://godbolt.org/#g:!((g:!((g:!((h:codeEditor,i:(fontScale:14,j:1,lang:rust,selection:(endColumn:2,endLineNumber:6,positionColumn:2,positionLineNumber:6,selectionStartColumn:2,selectionStartLineNumber:6,startColumn:2,startLineNumber:6),source:%27pub+fn+div(x:+u32,+y:+u32)+-%3E+u32+%7B%0A++++x+/+y%0A%7D%0Apub+fn+safe_div(x:+u32,+y:+std::num::NonZeroU32)+-%3E+u32+%7B%0A++++x+/+y.get()+//+an+unchecked+division+expected%0A%7D%27),l:%275%27,n:%270%27,o:%27Rust+source+%231%27,t:%270%27)),k:50,l:%274%27,n:%270%27,o:%27%27,s:0,t:%270%27),(g:!((h:compiler,i:(compiler:r1470,filters:(b:%270%27,binary:%271%27,commentOnly:%270%27,demangle:%270%27,directives:%270%27,execute:%271%27,intel:%270%27,libraryCode:%271%27,trim:%271%27),fontScale:14,j:1,lang:rust,libs:!(),options:%27-O%27,selection:(endColumn:1,endLineNumber:1,positionColumn:1,positionLineNumber:1,selectionStartColumn:1,selectionStartLineNumber:1,startColumn:1,startLineNumber:1),source:1),l:%275%27,n:%270%27,o:%27rustc+1.47.0+(Editor+%231,+Compiler+%231)+Rust%27,t:%270%27)),k:50,l:%274%27,n:%270%27,o:%27%27,s:0,t:%270%27)),l:%272%27,n:%270%27,o:%27%27,t:%270%27)),version:4).
Avoiding the `panic` currently requires `unsafe` code.
This PR adds an `impl Div<NonZeroU{0}> for u{0}` (and `impl Rem<NonZeroU{0}> for u{0}`) which calls the `unchecked_div` (and `unchecked_rem`) intrinsic without any additional checks,
making the following code compile:
```
pub fn safe_div(x: u32, y: std::num::NonZeroU32) -> u32 {
x / y
}
pub fn safe_rem(x: u32, y: std::num::NonZeroU32) -> u32 {
x % y
}
```
The doc is set to match the regular div impl [docs](https://doc.rust-lang.org/beta/src/core/ops/arith.rs.html#460).
I've marked these as stable because (as I understand it) trait impls are automatically stable. I'm happy to change it to unstable if needed.
Following `@dtolnay` template from a similar issue:
this adds the following **stable** impls, which rely on dividing unsigned integers by nonzero integers being well defined and previously would have involved unsafe code to encode that knowledge:
```
impl Div<NonZeroU8> for u8 {
type Output = u8;
}
impl Rem<NonZeroU8> for u8 {
type Output = u8;
}
```
and equivalent for u16, u32, u64, u128, usize, but **not** for i8, i16, i32, i64, i128, isize (since -1/MIN is undefined).
r? `@dtolnay`
