- Unify the representations of `cat_upvar` and `cat_copied_upvar`
- In `link_reborrowed_region`, account for the ability of upvars to
change their mutability due to later processing. A map of recursive
region links we may want to establish in the future is maintained,
with the links being established when the kind of the borrow is
adjusted.
- When categorizing upvars, add an explicit deref that represents the
closure environment pointer for closures that do not take the
environment by value. The region for the implicit pointer is an
anonymous free region type introduced for this purpose. This
creates the necessary constraint to prevent unsound reborrows from
the environment.
- Add a note to categorizations to make it easier to tell when extra
dereferences have been inserted by an upvar without having to
perform deep pattern matching.
- Adjust borrowck to deal with the changes. Where `cat_upvar` and
`cat_copied_upvar` were previously treated differently, they are
now both treated roughly like local variables within the closure
body, as the explicit derefs now ensure proper behavior. However,
error diagnostics had to be changed to explicitly look through the
extra dereferences to avoid producing confusing messages about
references not present in the source code.
Closes issue #17403. Remaining work:
- The error diagnostics that result from failed region inference are
pretty inscrutible and should be improved.
Code like the following is now rejected:
let mut x = 0u;
let f = || &mut x;
let y = f();
let z = f(); // multiple mutable references to the same location
This also breaks code that uses a similar construction even if it does
not go on to violate aliasability semantics. Such code will need to
be reworked in some way, such as by using a capture-by-value closure
type.
[breaking-change]
LLVM generates wrong code (which may be an instance of compile-time UB) when
faced with types that take lots of memory - bigger than the address space.
Make using such types a trans error. While trans errors are bad, overbig
types are expected to be very rare.
Use the integer sizes LLVM uses, rather than having random projections
laying around. Sizes are u64, Alignments are u32, C_*int is target-dependent
but 64-bit is fine (the int -> C_int conversion is non-precision-losing,
but it can be preceded by `as int` conversions which are, so it is
somewhat ugly. However, being able to suffix a `u` to properly infer
integer types is nice).
RFC 344 proposes a set of naming conventions for lints. This commit
renames existing lints to follow the conventions.
Use the following sed script to bring your code up to date:
```
s/unnecessary_typecast/unused_typecasts/g
s/unsigned_negate/unsigned_negation/g
s/type_limits/unused_comparisons/g
s/type_overflow/overflowing_literals/g
s/ctypes/improper_ctypes/g
s/owned_heap_memory/box_pointers/g
s/unused_attribute/unused_attributes/g
s/path_statement/path_statements/g
s/unused_must_use/unused_must_use/g
s/unused_result/unused_results/g
s/non_uppercase_statics/non_upper_case_globals/g
s/unnecessary_parens/unused_parens/g
s/unnecessary_import_braces/unused_import_braces/g
s/unused_unsafe/unused_unsafe/g
s/unsafe_block/unsafe_blocks/g
s/unused_mut/unused_mut/g
s/unnecessary_allocation/unused_allocation/g
s/missing_doc/missing_docs/g
s/unused_imports/unused_imports/g
s/unused_extern_crate/unused_extern_crates/g
s/unnecessary_qualification/unused_qualifications/g
s/unrecognized_lint/unknown_lints/g
s/unused_variable/unused_variables/g
s/dead_assignment/unused_assignments/g
s/unknown_crate_type/unknown_crate_types/g
s/variant_size_difference/variant_size_differences/g
s/transmute_fat_ptr/fat_ptr_transmutes/g
```
Closes#16545Closes#17932
Due to deprecation, this is a:
[breaking-change]
Function arguments are (hopefully!) the last places where allocas don't
get proper markers for the end of their lifetimes. This means that this
code using 64 bytes of stack for the function arguments:
````rust
std::io::println("1");
std::io::println("2");
std::io::println("3");
std::io::println("4");
````
But with the proper lifetime markers, the slots can be reused, and
the arguments only need 16 bytes of stack.
Doing so would incur deeply nested expansion of the tree with no useful
side effects. This is problematic for "wide" data types such as structs
with dozens of fields but where only a few are actually being matched or bound.
Most notably, matching a fixed slice would use a number of stack frames that
grows with the number of elements in the slice.
Fixes#17877.
Implement multidispatch and conditional dispatch. Because we do not attempt to preserve crate concatenation, this is a backwards compatible change. This is not yet fully integrated into method dispatch, so "UFCS"-style wrappers must be used to take advantage of the new features (see the run-pass tests).
cc #17307 (multidispatch)
cc #5527 (trait reform -- conditional dispatch)
Because we no longer preserve crate concatenability, this deviates slightly from what was specified in the RFC. The motivation for this change is described in [this blog post](http://smallcultfollowing.com/babysteps/blog/2014/09/30/multi-and-conditional-dispatch-in-traits/). I will post an amendment to the RFC in due course but do not anticipate great controversy on this point -- particularly as the RFCs more important features (e.g., conditional dispatch) just don't work without the change.
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
[rfc]: https://github.com/rust-lang/rfcs/pull/246
While booleans are represented as i1 in SSA values, LLVM expects them
to be stored/loaded as i8 values. Using i1 as we do now works, but
kills some optimizations, so we should switch to i8, just like we do
everywhere else.
Fixes#16959.
While booleans are represented as i1 in SSA values, LLVM expects them
to be stored/loaded as i8 values. Using i1 as we do now works, but
kills some optimizations, so we should switch to i8, just like we do
everywhere else.
Fixes#16959.
Apart from making the build system determine the LLDB version, this PR also fixes an issue with enums in LLDB pretty printers. In order for GDB's pretty printers to know for sure if a field of some value is an enum discriminant, I had rustc mark discriminant fields with the `artificial` DWARF tag. This worked out nicely for GDB but it turns out that one can't access artificial fields from LLDB. So I changed the debuginfo representation so that enum discriminants are marked by the special field name `RUST$ENUM$DISR` instead, which works in both cases.
The PR does not activate the LLDB test suite yet.
LLDB doesn't allow for reading 'artifical' fields (fields that are generated by the compiler). So do not mark, slice fields, enum discriminants, and GcBox value fields as artificial.
This is a quick fix that prevents an ICE by mimicing the visitor
glue for boxed closures and bare functions. Ideally, the `TyVisitor`
interface will be improved in the future to allow representing
more information about unboxed closures such as Fn/FnMut/FnOnce
status, capture mode, and captured free variable types and offsets.
Closes issue #17737
This began as an attempt to fix an ICE in borrowck (issue #17655), but the rabbit hole went pretty deep. I ended up plumbing support for capture-by-reference unboxed closures all the way into trans.
Closes issue #17655.
Store references to the freevars instead of copies when constructing
the environment and insert an additional load when reading them from
the environment.
