A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
```rust
fn main() {
match true {
true => {
let mut x = 1;
let y = &x;
let z = &mut x;
}
false => ()
}
}
test.rs:6:21: 6:27 error: cannot borrow `x` as mutable because it is already borrowed as immutable
test.rs:6 let z = &mut x;
^~~~~~
test.rs:5:21: 5:23 note: previous borrow of `x` occurs here; the immutable borrow prevents subsequent moves or mutable borrows of `x` until the borrow ends
test.rs:5 let y = &x;
^~
test.rs:7:10: 7:10 note: previous borrow ends here
test.rs:3 true => {
test.rs:4 let mut x = 1;
test.rs:5 let y = &x;
test.rs:6 let z = &mut x;
test.rs:7 }
^
```
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:4:2: 4:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
test.rs:2 let t1 = &mut *t0;
test.rs:3 let p: &int = &**t0;
test.rs:4 }
^
```
For the "previous borrow ends here" note, if the span is too long (has too many lines), then only the first and last lines are printed, and the middle is replaced with dot dot dot:
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:7:2: 7:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
...
test.rs:7 }
^
```
(Sidenote: the `span_end_note` currently also has issue #11715)
Renamed the invert() function in iter.rs to flip().
Also renamed the Invert<T> type to Flip<T>.
Some related code comments changed. Documentation that I could find has
been updated, and all the instances I could locate where the
function/type were called have been updated as well.
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
When there is `println!` macro in the code, compiling is never end.
```rust
// print.rs
fn main() {
println!("Hello!");
}
```
```bash
$ RUST_LOG=rustc rustc print.rs
```
And this is a part of output from stderr.
```bash
# ...
Looking up syntax::ast::DefId{crate: 1u32, node: 176234u32}
looking up syntax::ast::DefId{crate: 1u32, node: 176235u32} : extra::ebml::Doc<>{data: &[168u8, 16u8, 0u8, 0u8, 16u8, 51u8, 101u8, 53u8, 97u8, 101u8, 98u8, 56u8, 51u8, 55u8, 97u8, 101u8, 49u8, 54u8, 50u8
# ...
# vector which has infinite length.
```
* note : rust 0.9, 0.10-pre
[On 2013-12-06, I wrote to the rust-dev mailing list](https://mail.mozilla.org/pipermail/rust-dev/2013-December/007263.html):
> Subject: Let’s avoid having both foo() and foo_opt()
>
> We have some functions and methods such as [std::str::from_utf8](http://static.rust-lang.org/doc/master/std/str/fn.from_utf8.html) that may succeed and give a result, or fail when the input is invalid.
>
> 1. Sometimes we assume the input is valid and don’t want to deal with the error case. Task failure works nicely.
>
> 2. Sometimes we do want to do something different on invalid input, so returning an `Option<T>` works best.
>
> And so we end up with both `from_utf8` and `from_utf8`. This particular case is worse because we also have `from_utf8_owned` and `from_utf8_owned_opt`, to cover everything.
>
> Multiplying names like this is just not good design. I’d like to reduce this pattern.
>
> Getting behavior 1. when you have 2. is easy: just call `.unwrap()` on the Option. I think we should rename every `foo_opt()` function or method to just `foo`, remove the old `foo()` behavior, and tell people (through documentation) to use `foo().unwrap()` if they want it back?
>
> The downsides are that unwrap is more verbose and gives less helpful error messages on task failure. But I think it’s worth it.
The email discussion has gone around long enough. Let’s discuss a concrete proposal. For the following functions or methods, I removed `foo` (that caused task failure) and renamed `foo_opt` (that returns `Option`) to just `foo`.
Vector methods:
* `get_opt` (rename only, `get` did not exist as it would have been just `[]`)
* `head_opt`
* `last_opt`
* `pop_opt`
* `shift_opt`
* `remove_opt`
`std::path::BytesContainer` method:
* `container_as_str_opt`
`std::str` functions:
* `from_utf8_opt`
* `from_utf8_owned_opt` (also remove the now unused `not_utf8` condition)
Is there something else that should recieve the same treatement?
I did not rename `recv_opt` on channels based on @brson’s [feedback](https://mail.mozilla.org/pipermail/rust-dev/2013-December/007270.html).
Feel free to pick only some of these commits.
To build for the cortex-M series ARM processors LLC needs to be told to build for the thumb instruction set. There are two ways to do this, either with the triple "thumb\*-\*-\*" or with -march=thumb (which just overrides the triple anyway). I chose the first way.
The following will fail because the local cc doesn't know what to do with -mthumb.
````
rustc test.rs --lib --target thumb-linux-eab
error: linking with `cc` failed: exit code: 1
note: cc: error: unrecognized command line option ‘-mthumb’
````
Changing the linker works as expected.
````
rustc test.rs --lib --target thumb-linux-eabi --linker arm-none-eabi-gcc
````
Ideally I'd have the triple thumb-none-eabi, but adding a new OS looks like much more work (and I'm not familiar enough with what it does to know if it is needed).
* Stop using hardcoded numbers that have to all get updated when something changes (inevitable errors and rebase conflicts) as well as removes some unneeded -Z options (obsoleted over time).
* Remove `std::rt::borrowck`
The included test case would essentially never finish compiling without this
patch. It recursies twice at every ExprParen meaning that the branching factor
is 2^n
The included test case will take so long to parse on the old compiler that it'll
surely never let this crop up again.
The included test case would essentially never finish compiling without this
patch. It recursies twice at every ExprParen meaning that the branching factor
is 2^n
The included test case will take so long to parse on the old compiler that it'll
surely never let this crop up again.
Previously, they were treated like ~[] and &[] (which can have length
0), but fixed length vectors are fixed length, i.e. we know at compile
time if it's possible to have length zero (which is only for [T, .. 0]).
Fixes#11659.
Previously, they were treated like ~[] and &[] (which can have length
0), but fixed length vectors are fixed length, i.e. we know at compile
time if it's possible to have length zero (which is only for [T, .. 0]).
Fixes#11659.
NodeIds are sequential integers starting at zero, so we can achieve some
memory savings by just storing the items all in a line in a vector.
The occupancy for typical crates seems to be 75-80%, so we're already
more efficient than a HashMap (maximum occupancy 75%), not even counting
the extra book-keeping that HashMap does.
NodeIds are sequential integers starting at zero, so we can achieve some
memory savings by just storing the items all in a line in a vector.
The occupancy for typical crates seems to be 75-80%, so we're already
more efficient than a HashMap (maximum occupancy 75%), not even counting
the extra book-keeping that HashMap does.
This commit re-works how the monitor() function works and how it both receives
and transmits errors. There are a few cases in which the compiler can abort:
1. A normal compiler error. In this case, the compiler raises a FatalError as
the failure value of the task. If this happens, then the monitor task does
nothing. It ignores all stderr output of the child task and it also
suppresses the failure message of the main task itself. This means that on a
normal compiler error just the error message itself is printed.
2. A normal internal compiler error. These are invoked from sess.span_bug() and
friends. In these cases, they follow the same path (raising a FatalError),
but they will also print an ICE message which has a URL to go report a bug.
3. An actual compiler bug. This happens whenever anything calls fail!() instead
of going through the session itself. In this case, we print out stuff about
RUST_LOG=2 and we by default capture all stderr and print via warn!() so it's
only printed out with the RUST_LOG var set.
For `use` statements, this means disallowing qualifiers when in functions and
disallowing `priv` outside of functions.
For `extern mod` statements, this means disallowing everything everywhere. It
may have been envisioned for `pub extern mod foo` to be a thing, but it
currently doesn't do anything (resolve doesn't pick it up), so better to err on
the side of forwards-compatibility and forbid it entirely for now.
Closes#9957
This commit re-works how the monitor() function works and how it both receives
and transmits errors. There are a few cases in which the compiler can abort:
1. A normal compiler error. In this case, the compiler raises a FatalError as
the failure value of the task. If this happens, then the monitor task does
nothing. It ignores all stderr output of the child task and it also
suppresses the failure message of the main task itself. This means that on a
normal compiler error just the error message itself is printed.
2. A normal internal compiler error. These are invoked from sess.span_bug() and
friends. In these cases, they follow the same path (raising a FatalError),
but they will also print an ICE message which has a URL to go report a bug.
3. An actual compiler bug. This happens whenever anything calls fail!() instead
of going through the session itself. In this case, we print out stuff about
RUST_LOG=2 and we by default capture all stderr and print via warn!() so it's
only printed out with the RUST_LOG var set.
For `use` statements, this means disallowing qualifiers when in functions and
disallowing `priv` outside of functions.
For `extern mod` statements, this means disallowing everything everywhere. It
may have been envisioned for `pub extern mod foo` to be a thing, but it
currently doesn't do anything (resolve doesn't pick it up), so better to err on
the side of forwards-compatibility and forbid it entirely for now.
Closes#9957
