Point at return type when it influences non-first `match` arm
When encountering code like
```rust
fn foo() -> i32 {
match 0 {
1 => return 0,
2 => "",
_ => 1,
}
}
```
Point at the return type and not at the prior arm, as that arm has type `!` which isn't influencing the arm corresponding to arm `2`.
Fix#78124.
Store the laziness of type aliases in their `DefKind`
Previously, we would treat paths referring to type aliases as *lazy* type aliases if the current crate had lazy type aliases enabled independently of whether the crate which the alias was defined in had the feature enabled or not.
With this PR, the laziness of a type alias depends on the crate it is defined in. This generally makes more sense to me especially if / once lazy type aliases become the default in a new edition and we need to think about *edition interoperability*:
Consider the hypothetical case where the dependency crate has an older edition (and thus eager type aliases), it exports a type alias with bounds & a where-clause (which are void but technically valid), the dependent crate has the latest edition (and thus lazy type aliases) and it uses that type alias. Arguably, the bounds should *not* be checked since at any time, the dependency crate should be allowed to change the bounds at will with a *non*-major version bump & without negatively affecting downstream crates.
As for the reverse case (dependency: lazy type aliases, dependent: eager type aliases), I guess it rules out anything from slight confusion to mild annoyance from upstream crate authors that would be caused by the compiler ignoring the bounds of their type aliases in downstream crates with older editions.
---
This fixes#114468 since before, my assumption that the type alias associated with a given weak projection was lazy (and therefore had its variances computed) did not necessarily hold in cross-crate scenarios (which [I kinda had a hunch about](https://github.com/rust-lang/rust/pull/114253#discussion_r1278608099)) as outlined above. Now it does hold.
`@rustbot` label F-lazy_type_alias
r? `@oli-obk`
Improve spans for indexing expressions
fixes#114388
Indexing is similar to method calls in having an arbitrary left-hand-side and then something on the right, which is the main part of the expression. Method calls already have a span for that right part, but indexing does not. This means that long method chains that use indexing have really bad spans, especially when the indexing panics and that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an extra span which is then put into the `fn_span` field in THIR.
r? compiler-errors
Indexing is similar to method calls in having an arbitrary
left-hand-side and then something on the right, which is the main part
of the expression. Method calls already have a span for that right part,
but indexing does not. This means that long method chains that use
indexing have really bad spans, especially when the indexing panics and
that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an
extra span which is then put into the `fn_span` field in THIR.
Perform OpaqueCast field projection on HIR, too.
fixes#105819
This is necessary for closure captures in 2021 edition, as they capture individual fields, not the full mentioned variables. So it may try to capture a field of an opaque (because the hidden type is known to be something with a field).
See https://github.com/rust-lang/rust/pull/99806 for when and why we added OpaqueCast to MIR.
[`slow_vector_initialization`]: catch `Vec::new()` followed by `.resize(len, 0)`
Closes#10938
changelog: [`slow_vector_initialization`]: catch `Vec::new()` followed by `.resize(len, 0)`
This is necessary for closure captures in 2021 edition, as they capture individual fields, not the full mentioned variables. So it may try to capture a field of an opaque (because the hidden type is known to be something with a field).
check that the types are equal in `SpanlessEq::eq_expr`
Fixes#11213
changelog: [`if_same_then_else`]: don't lint for integer literals of different types
Refactor some of `dereference.rs` to util functions
I've seen a few lints that need to be able to tell if changing the type of an expression would be a vaild suggestion. This extracts part of how that's done from `explicit_auto_deref`.
changelog: None
Allow `Self::cmp(self, other)` as a correct impl
Fixes#11178
Also no longer checks if the method name is *just* cmp, but the path. That was an oversight on my part ^^
r? `@xFrednet`
(and `@blyxyas` too!)
changelog: [`incorrect_partial_ord_impl_on_ord_type`]: Now allows non-method calls to `cmp` like `Self::cmp(self, other)`
Clippy had a false positive for with `ifs_same_cond` when two
if-let expressions have an `option_env!` macro. The fix is similar to the
`env!` macro fix.
The following example had a clippy error:
```rust
if let Some(env1) = option_env!("ENV1") {
// ...
} else if let Some(env2) = option_env!("ENV2") {
// ...
}
```
See https://play.rust-lang.org/?version=stable&mode=debug&edition=2021&gist=01b85c61b56ddd900117fb247af04824
changelog: Fix [`ifs_same_cond`] false positive when using `option_env!` in if-let expressions.
[`manual_filter_map`]: lint on `matches` and pattern matching
Fixes#8010
Previously this lint only worked specifically for a very limited set of methods on the filter call (`.filter(|opt| opt.is_some())` and `.filter(|res| res.is_ok())`). This PR extends it to also recognize `matches!` in the `filter` and pattern matching with `if let` or `match` in the `map`.
Example:
```rs
enum Enum {
A(i32),
B,
}
let _ = [Enum::A(123), Enum::B].into_iter()
.filter(|x| matches!(x, Enum::A(_)))
.map(|x| if let Enum::A(s) = x { s } else { unreachable!() });
```
Now suggests:
```diff
- .filter(|x| matches!(x, Enum::A(_))).map(if let Enum::A(s) = x { s } else { unreachable!() })
+ .filter_map(|x| match x { Enum::A(s) => Some(s), _ => None })
```
Adding this required a somewhat large change in code because it originally seemed to be specifically written with only method calls in the filter in mind, and `matches!` has different behavior in the map, so this new setup should make it possible to support more "generic" cases that need different handling for the filter and map calls.
changelog: [`manual_filter_map`]: lint on `matches` and pattern matching (and some internal refactoring)
It makes it sound like the `ExprKind` and `Rvalue` are supposed to represent all pointer related
casts, when in reality their just used to share a some enum variants. Make it clear there these
are only coercion to make it clear why only some pointer related "casts" are in the enum.
Move `TyCtxt::mk_x` to `Ty::new_x` where applicable
Part of rust-lang/compiler-team#616
turns out there's a lot of places we construct `Ty` this is a ridiculously huge PR :S
r? `@oli-obk`
Specialize `try_destructure_mir_constant` for its sole user (pretty printing)
We can't remove the query, as we need to invoke it from rustc_middle, but can only implement it in mir interpretation/const eval.
r? `@RalfJung` for a first round.
While we could move all the logic into pretty printing, that would end up duplicating a bit of code with const eval, which doesn't seem great either.
Don't lint manual_let_else in cases where ? would work
Don't lint `manual_let_else` where the question mark operator `?` would be sufficient, that is, mostly in cases like:
```Rust
let v = if let Some(v) = ex { v } else { return None };
```
Also, this PR emits the `question_mark` lint for `let...else` patterns that could be written with `?` (also, only `return None` like cases).
```
changelog: [`manual_let_else`]: don't lint in cases where question_mark already lints
changelog: [`question_mark`]: lint for `let Some(...) = ex else { return None };`
```
Fixes #8755
New lint [`tuple_array_conversions`]
Closes#10748
PS, the implementation is a bit ugly 😅 ~~I will likely refactor soon enough :)~~ Done :D
changelog: New lint [`tuple_array_conversions`]
New lint [`redundant_at_rest_pattern`]
Closes#11011
It's always a great feeling when a new lint triggers on clippy itself 😄
changelog: New lint [`redundant_at_rest_pattern`]
suggests `is_some_and` over `map().unwrap`
changelog: Enhancement: [`option_map_unwrap_or`] now considers the [`msrv`] config when creating the suggestion.
* modified option_map_unwrap_or lint to recognise when an `Option<T>` is mapped to an `Option<bool>` with false being used when `None` is detected; suggests the use of `is_some_and` instead
* msrv is set to 1.70.0 for this lint; when `is_some_and` was stabilised
fixes#9125
Port clippy away from compiletest to ui_test
Reasons to do this:
* runs completely on stable Rust
* is easier to extend with new features
* has its own dogfood test suite, so changes can be tested in [the `ui_test` repo](https://github.com/oli-obk/ui_test)
* supports dependencies from crates.io without having to manually fiddle with command line flags
* supports `ui-cargo`, `ui`, `ui-toml` out of the box, no need to find and run the tests ourselves
One thing that is a big difference to `compiletest` is that if a test emits *any* error, you need to mark all of them with `//~ ERROR:` annotations. Since many clippy tests did not have annotations, I changed many lints to be `warn` in their test so that only the `stderr` output is tested.
TODO:
* [ ] check that this still works as a subtree in the rustc repo
changelog: none
<!-- changelog_checked -->
Note: at present the latest changes needed for clippy are only available as a git dependency, but I expect to publish a new crates.io version soon
`hir`: Add `Become` expression kind (explicit tail calls experiment)
This adds `hir::ExprKind::Become` alongside ast lowering. During hir-thir lowering we currently lower `become` as `return`, so that we can partially test `become` without ICEing.
cc `@scottmcm`
r? `@Nilstrieb`
Check if `if` conditions always evaluate to true in `never_loop`
This fixes the example provided in #11004, but it shouldn't be closed as this is still an issue on like
```rust
let x = true;
if x { /* etc */ }`
```
This also makes `clippy_utils::consts::constant` handle `ConstBlock` and `DropTemps`.
changelog: [`never_loop`]: Check if `if` conditions always evaluate to true
Syntactically accept `become` expressions (explicit tail calls experiment)
This adds `ast::ExprKind::Become`, implements parsing and properly gates the feature.
cc `@scottmcm`
Add a fully fledged `Clause` type, rename old `Clause` to `ClauseKind`
Does two basic things before I put up a more delicate set of PRs (along the lines of #112714, but hopefully much cleaner) that migrate existing usages of `ty::Predicate` to `ty::Clause` (`predicates_of`/`item_bounds`/`ParamEnv::caller_bounds`).
1. Rename `Clause` to `ClauseKind`, so it's parallel with `PredicateKind`.
2. Add a new `Clause` type which is parallel to `Predicate`.
* This type exposes `Clause::kind(self) -> Binder<'tcx, ClauseKind<'tcx>>` which is parallel to `Predicate::kind` 😸
The new `Clause` type essentially acts as a newtype wrapper around `Predicate` that asserts that it is specifically a `PredicateKind::Clause`. Turns out from experimentation[^1] that this is not negative performance-wise, which is wonderful, since this a much simpler design than something that requires encoding the discriminant into the alignment bits of a predicate kind, or something else like that...
r? ``@lcnr`` or ``@oli-obk``
[^1]: https://github.com/rust-lang/rust/pull/112714#issuecomment-1595653910
[`arithmetic_side_effects`] Fix#10792Fix#10792
```
changelog: [`arithmetic_side_effects`]: Retrieve field values of structures that are in constant environments
```
[`missing_const_for_fn`]: Ensure dropped locals are `~const Destruct`
this will check every local for `TerminatorKind::Drop` to ensure they can be evaluated at compile time, not sure if this is the best way to do this but MIR is confusing and it works so...
fixes#10617
changelog: [`missing_const_for_fn`]: Ensure dropped locals are `~const Destruct`
Extend `explicit_iter_loop` and `explicit_into_iter_loop`
fixes#1518
Some included cleanups
* Split `for_loop` test into different files for each lint (partially).
* Move handling of some `into_iter` cases from `explicit_into_iter`.
---
changelog: Enhancement: [`explicit_iter_loop`]: Now also handles types that implement `IntoIterator`.
[#10416](https://github.com/rust-lang/rust-clippy/pull/10416)
changelog: Sugg: [`explicit_into_iter_loop`]: The suggestion now works on mutable references.
[#10416](https://github.com/rust-lang/rust-clippy/pull/10416)
<!-- changelog_checked -->
[`unnecessary_lazy_eval`]: don't lint on types with deref impl
Fixes#10437.
This PR changes clippy's util module `eager_or_lazy` to also consider deref expressions whose type has a non-builtin deref impl and not suggest replacing it as that might have observable side effects.
A prominent example might be the `lazy_static` macro, which creates a newtype with a `Deref` impl that you need to go through to get access to the inner value. Going from lazy to eager can make a difference there.
changelog: [`unnecessary_lazy_eval`]: don't lint on types with non-builtin deref impl
[`allow_attributes`, `allow_attributes_without_reason`]: Ignore attributes from procedural macros
I use `lint_reasons` and `clap`, which is a bit overzealous when it comes to preventing warnings in its macros; it uses a ton of allow attributes on everything to, as ironic as it is, silence warnings. These two now ignore anything from procedural macros.
PS, I think `allow_attributes.rs` should be merged with `attrs.rs` in the future.
fixes#10377
changelog: [`allow_attributes`, `allow_attributes_without_reason`]: Ignore attributes from procedural macros
move some strings into consts, more tests
s/missing_field_in_debug/missing_fields_in_debug
dont trigger in macro expansions
make dogfood tests happy
minor cleanups
replace HashSet with FxHashSet
replace match_def_path with match_type
if_chain -> let chains, fix markdown, allow newtype pattern
fmt
consider string literal in `.field()` calls as used
don't intern defined symbol, remove mentions of 'debug_tuple'
special-case PD, account for field access through `Deref`
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
[`default_constructed_unit_structs`]: do not lint on type alias paths
Fixes#10755.
Type aliases cannot be used as a constructor, so this lint should not trigger in those cases.
I also changed `clippy_utils::is_ty_alias` to also consider associated types since [they kinda are type aliases too](48ec50ae39/compiler/rustc_resolve/src/late/diagnostics.rs (L1520)).
changelog: [`default_constructed_unit_structs`]: do not lint on type alias paths
Add new lint `ptr_cast_constness`
This adds a new lint which functions as the opposite side of the coin to `ptr_as_ptr`. Rather than linting only as casts that don't change constness, this lints only constness; suggesting to use `pointer::cast_const` or `pointer::cast_mut` instead.
changelog: new lint [`ptr_cast_constness`]
* Don't consider expansions of different macros to be the same, even if they expand to the same tokens
* Don't consider `cfg!` expansions to be equal if they check different configs.
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
Switch to `EarlyBinder` for `explicit_item_bounds`
Part of the work to finish https://github.com/rust-lang/rust/issues/105779.
This PR adds `EarlyBinder` to the return type of the `explicit_item_bounds` query and removes `bound_explicit_item_bounds`.
r? `@compiler-errors` (hope it's okay to request you, since you reviewed #110299 and #110498😃)
use `is_inside_const_context` for `in_constant` util fn
Fixes#10452.
This PR improves the `in_constant` util function to detect more cases of const contexts. Previously this function would not detect cases like expressions in array length position or expression in an inline const block `const { .. }`.
changelog: [`bool_to_int_with_if`]: recognize array length operand as being in a const context and don't suggest `usize::from` there
Add offset_of! macro (RFC 3308)
Implements https://github.com/rust-lang/rfcs/pull/3308 (tracking issue #106655) by adding the built in macro `core::mem::offset_of`. Two of the future possibilities are also implemented:
* Nested field accesses (without array indexing)
* DST support (for `Sized` fields)
I wrote this a few months ago, before the RFC merged. Now that it's merged, I decided to rebase and finish it.
cc `@thomcc` (RFC author)
Make elaboration generic over input
Combines all the `elaborate_*` family of functions into just one, which is an iterator over the same type that you pass in (e.g. elaborating `Predicate` gives `Predicate`s, elaborating `Obligation`s gives `Obligation`s, etc.)
Initial support for return type notation (RTN)
See: https://smallcultfollowing.com/babysteps/blog/2023/02/13/return-type-notation-send-bounds-part-2/
1. Only supports `T: Trait<method(): Send>` style bounds, not `<T as Trait>::method(): Send`. Checking validity and injecting an implicit binder for all of the late-bound method generics is harder to do for the latter.
* I'd add this in a follow-up.
3. ~Doesn't support RTN in general type position, i.e. no `let x: <T as Trait>::method() = ...`~
* I don't think we actually want this.
5. Doesn't add syntax for "eliding" the function args -- i.e. for now, we write `method(): Send` instead of `method(..): Send`.
* May be a hazard if we try to add it in the future. I'll probably add it in a follow-up later, with a structured suggestion to change `method()` to `method(..)` once we add it.
7. ~I'm not in love with the feature gate name 😺~
* I renamed it to `return_type_notation` ✔️
Follow-up PRs will probably add support for `where T::method(): Send` bounds. I'm not sure if we ever want to support return-type-notation in arbitrary type positions. I may also make the bounds require `..` in the args list later.
r? `@ghost`
In uninit checking, add fallback for polymorphic types
After #10520, we always assumed that polymorphic types do not allow to be left uninitialized. But we can do better, by peeking into polymorphic types and adding a few special cases for going through tuples, arrays (because the length may be polymorphic) and blanket allowing all unions (like MaybeUninit).
fixes#10551
changelog: [uninit_vec]: fix false positive for polymorphic types
changelog: [uninit_assumed_init]: fix false positive for polymorphic types
Remove the `NodeId` of `ast::ExprKind::Async`
This is a followup to https://github.com/rust-lang/rust/pull/104833#pullrequestreview-1314537416.
In my original attempt, I was using `LoweringContext::expr`, which was not correct as it creates a fresh `DefId`.
It now uses the correct `DefId` for the wrapping `Expr`, and also makes forwarding `#[track_caller]` attributes more explicit.
Make this function work with signed integer types by extracting the
underlying type and finding the min and max values.
Change the signature to make it more consistent:
- The range is now given as an `Expr` in order to extract the type
- The container's path is now passed, and only as an `Option` so that
the function can be called in the general case without a container
Rollup of 7 pull requests
Successful merges:
- #108541 (Suppress `opaque_hidden_inferred_bound` for nested RPITs)
- #109137 (resolve: Querify most cstore access methods (subset 2))
- #109380 (add `known-bug` test for unsoundness issue)
- #109462 (Make alias-eq have a relation direction (and rename it to alias-relate))
- #109475 (Simpler checked shifts in MIR building)
- #109504 (Stabilize `arc_into_inner` and `rc_into_inner`.)
- #109506 (make param bound vars visibly bound vars with -Zverbose)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Updates `interpret`, `codegen_ssa`, and `codegen_cranelift` to consume the new cast instead of the intrinsic.
Includes `CastTransmute` for custom MIR building, to be able to test the extra UB.
rustc has proper heuristics for actually checking whether a type allows
being left uninitialized (by asking CTFE). We can now use this for our
helper instead of rolling our own bad version with false positives.
Remove box expressions from HIR
After #108516, `#[rustc_box]` is used at HIR->THIR lowering and this is no longer emitted, so it can be removed.
This is based on top of #108471 to help with conflicts, so 43490488ccacd1a822e9c621f5ed6fca99959a0b is the only relevant commit (sorry for all the duplicated pings!)
````@rustbot```` label +S-blocked
Remove `identity_future` indirection
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]`annotation.
Fixes https://github.com/rust-lang/rust/issues/104826.
Migrate `write.rs` to `rustc_ast::FormatArgs`
changelog: none
Part 1 of #10233
The additions to `clippy_utils` are the main novelty of this PR, there's no removals yet since other parts still rely on `FormatArgsExpn`
The changes to `write.rs` itself are relatively straightforward this time around, as there's no lints in it that rely on type checking format params
r? `@flip1995`
This was previously needed because the indirection used to hide some unexplained lifetime errors, which it turned out were related to the `min_choice` algorithm.
Removing the indirection also solves a couple of cycle errors, large moves and makes async blocks support the `#[track_caller]` annotation.
Restrict `#[rustc_box]` to `Box::new` calls
Currently, `#[rustc_box]` can be applied to any call expression with a single argument. This PR only allows it to be applied to calls to `Box::new`
(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
Use `target` instead of `machine` for mir interpreter integer handling.
The naming of `machine` only makes sense from a mir interpreter internals perspective, but outside users talk about the `target` platform. As per https://github.com/rust-lang/rust/pull/108029#issuecomment-1429791015
r? `@RalfJung`
Avoid accessing HIR when it can be avoided
Experiment to see if it helps some incremental cases.
Will be rebased once https://github.com/rust-lang/rust/pull/107942 gets merged.
r? `@ghost`
Implement `deferred_projection_equality` for erica solver
Somewhat of a revival of #96912. When relating projections now emit an `AliasEq` obligation instead of attempting to determine equality of projections that may not be as normalized as possible (i.e. because of lazy norm, or just containing inference variables that prevent us from resolving an impl). Only do this when the new solver is enabled
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
Remove HirId -> LocalDefId map from HIR.
Having this map in HIR prevents the creating of new definitions after HIR has been built.
Thankfully, we do not need it.
Based on https://github.com/rust-lang/rust/pull/103902
Move format_args!() into AST (and expand it during AST lowering)
Implements https://github.com/rust-lang/compiler-team/issues/541
This moves FormatArgs from rustc_builtin_macros to rustc_ast_lowering. For now, the end result is the same. But this allows for future changes to do smarter things with format_args!(). It also allows Clippy to directly access the ast::FormatArgs, making things a lot easier.
This change turns the format args types into lang items. The builtin macro used to refer to them by their path. After this change, the path is no longer relevant, making it easier to make changes in `core`.
This updates clippy to use the new language items, but this doesn't yet make clippy use the ast::FormatArgs structure that's now available. That should be done after this is merged.
[needless_return]: Remove all semicolons on suggestion
Closes#10182
Multiple semicolons currently breaks autofix for `needless_return` suggestions. Any semicolons left after removing return means that the return type will always be `()`, and thus fail to compile.
This PR allows `needless_return` to remove multiple semicolons.
The change won't cover the case where there is multiple line yet.
i.e.
```rust
fn needless_return() -> bool {
return true;
;;
}
```
---
changelog: Sugg: [`needless_return`]: Now removes all semicolons on the same line
[#10187](https://github.com/rust-lang/rust-clippy/pull/10187)
<!-- changelog_checked -->
chore: add simple comment for `get_enclosing_block`
I was reading the code of `clippy_utils/src/lib.rs` and thought that adding comment on `get_closing_block` would be helpful to first time visitor.
---
changelog: none
<!-- changelog_checked -->
This commit makes the ContainsName struct visit all interior
expressions, which means that ContainsName will return true
even if `name` is used in a closure within `expr`.
Rollup of 9 pull requests
Successful merges:
- #104531 (Provide a better error and a suggestion for `Fn` traits with lifetime params)
- #105899 (`./x doc library --open` opens `std`)
- #106190 (Account for multiple multiline spans with empty padding)
- #106202 (Trim more paths in obligation types)
- #106234 (rustdoc: simplify settings, help, and copy button CSS by not reusing)
- #106236 (docs/test: add docs and a UI test for `E0514` and `E0519`)
- #106259 (Update Clippy)
- #106260 (Fix index out of bounds issues in rustdoc)
- #106263 (Formatter should not try to format non-Rust files)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Improve `possible_borrower`
This PR makes several improvements to `clippy_uitls::mir::possible_borrower`. These changes benefit both `needless_borrow` and `redundant clone`.
1. **Use the compiler's `MaybeStorageLive` analysis**
I could spot not functional differences between the one in the compiler and the one in Clippy's repository. So, I removed the latter in favor of the the former.
2. **Make `PossibleBorrower` a dataflow analysis instead of a visitor**
The main benefit of this change is that allows `possible_borrower` to take advantage of statements' relative locations, which is easier to do in an analysis than in a visitor.
This is easier to illustrate with an example, so consider this one:
```rust
fn foo(cx: &LateContext<'_>, lint: &'static Lint) {
cx.struct_span_lint(lint, rustc_span::Span::default(), "", |diag| diag.note(&String::new()));
// ^
}
```
We would like to flag the `&` pointed to by the `^` for removal. `foo`'s MIR begins like this:
```rust
fn span_lint::foo::{closure#0}(_1: [closure@$DIR/needless_borrow.rs:396:68: 396:74], _2: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>) -> &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()> {
debug diag => _2; // in scope 0 at $DIR/needless_borrow.rs:396:69: 396:73
let mut _0: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // return place in scope 0 at $DIR/needless_borrow.rs:396:75: 396:75
let mut _3: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // in scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
let mut _4: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // in scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
let mut _5: &std::string::String; // in scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
let _6: std::string::String; // in scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
bb0: {
StorageLive(_3); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
StorageLive(_4); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
_4 = &mut (*_2); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
StorageLive(_5); // scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
StorageLive(_6); // scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
_6 = std::string::String::new() -> bb1; // scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
// mir::Constant
// + span: $DIR/needless_borrow.rs:396:86: 396:97
// + literal: Const { ty: fn() -> std::string::String {std::string::String::new}, val: Value(<ZST>) }
}
bb1: {
_5 = &_6; // scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
_3 = rustc_errors::diagnostic_builder::DiagnosticBuilder::<'_, ()>::note::<&std::string::String>(move _4, move _5) -> [return: bb2, unwind: bb4]; // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
// mir::Constant
// + span: $DIR/needless_borrow.rs:396:80: 396:84
// + literal: Const { ty: for<'a> fn(&'a mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>, &std::string::String) -> &'a mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()> {rustc_errors::diagnostic_builder::DiagnosticBuilder::<'_, ()>::note::<&std::string::String>}, val: Value(<ZST>) }
}
```
The call to `diag.note` appears in `bb1` on the line beginning with `_3 =`. The `String` is owned by `_6`. So, in the call to `diag.note`, we would like to know whether there are any references to `_6` besides `_5`.
The old, visitor approach did not consider the relative locations of statements. So all borrows were treated the same, *even if they occurred after the location of interest*.
For example, before the `_3 = ...` call, the possible borrowers of `_6` would be just `_5`. But after the call, the possible borrowers would include `_2`, `_3`, and `_4`.
So, in a sense, the call from which we are try to remove the needless borrow is trying to prevent us from removing the needless borrow(!).
With an analysis, things do not get so muddled. We can determine the set of possible borrowers at any specific location, e.g., using a `ResultsCursor`.
3. **Change `only_borrowers` to `at_most_borrowers`**
`possible_borrowers` exposed a function `only_borrowers` that determined whether the borrowers of some local were *exactly* some set `S`. But, from what I can tell, this was overkill. For the lints that currently use `possible_borrower` (`needless_borrow` and `redundant_clone`), all we really want to know is whether there are borrowers *other than* those in `S`. (Put another way, we only care about the subset relation in one direction.) The new function `at_most_borrowers` takes this more tailored approach.
4. **Compute relations "on the fly" rather than using `transitive_relation`**
The visitor would compute and store the transitive closure of the possible borrower relation for an entire MIR body.
But with an analysis, there is effectively a different possible borrower relation at each location in the body. Computing and storing a transitive closure at each location would not be practical.
So the new approach is to compute the transitive closure on the fly, as needed. But the new approach might actually be more efficient, as I now explain.
In all current uses of `at_most_borrowers` (previously `only_borrowers`), the size of the set of borrowers `S` is at most 2. So you need only check at most three borrowers to determine whether the subset relation holds. That is, once you have found a third borrower, you can stop, since you know the relation cannot hold.
Note that `transitive_relation` is still used by `clippy_uitls::mir::possible_origin` (a kind of "subroutine" of `possible_borrower`).
cc: `@Jarcho`
---
changelog: [`needless_borrow`], [`redundant_clone`]: Now track references better and detect more cases
[#9701](https://github.com/rust-lang/rust-clippy/pull/9701)
<!-- changelog_checked -->
Avoid `match_wildcard_for_single_variants` on guarded wild matches
fix#9993
changelog: FP: [`match_wildcard_for_single_variants`]: No longer lints on wildcards with a guard
[#10056](https://github.com/rust-lang/rust-clippy/pull/10056)
<!-- changelog_checked -->
r? `@Jarcho`
Remove `token::Lit` from `ast::MetaItemLit`.
Currently `ast::MetaItemLit` represents the literal kind twice. This PR removes that redundancy. Best reviewed one commit at a time.
r? `@petrochenkov`
rustc_ast_lowering: Stop lowering imports into multiple items
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
This is required to distinguish between cooked and raw byte string
literals in an `ast::LitKind`, without referring to an adjacent
`token::Lit`. It's a prerequisite for the next commit.
Treat custom enum discriminant values as constants
fixes#9882
changelog: All lints: Don't lint in enum discriminant values when the suggestion won't work in a const context
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
Separate lifetime ident from lifetime resolution in HIR
Drive-by: change how suggested generic args are computed.
Fixes https://github.com/rust-lang/rust/issues/103815
I recommend reviewing commit-by-commit.
Add `clippy_utils::msrv::Msrv` to keep track of the current MSRV
changelog: Fix the scoping of the `#![clippy::msrv]` attribute
Fixes#6920
r? `@Jarcho`
Fix [`unnecessary_lazy_eval`] when type has significant drop
fix for https://github.com/rust-lang/rust-clippy/issues/9427#issuecomment-1295742590
However current implementation gives too many false positive, rending the lint almost useless.
I don't know what's the best way to check if a type has a "significant" drop (in the common meaning, not the internal rustc one, for example Option<(u8, u8)> should not be considered significant)
changelog: Fix [`unnecessary_lazy_eval`] when type has significant drop
Update Clippy
r? `@Manishearth`
Sorry for taking so long. There were so many blockers and so little time. This situation should be mitigated with #104007 in the future.
Rollup of 11 pull requests
Successful merges:
- #103396 (Pin::new_unchecked: discuss pinning closure captures)
- #104416 (Fix using `include_bytes` in pattern position)
- #104557 (Add a test case for async dyn* traits)
- #104559 (Split `MacArgs` in two.)
- #104597 (Probe + better error messsage for `need_migrate_deref_output_trait_object`)
- #104656 (Move tests)
- #104657 (Do not check transmute if has non region infer)
- #104663 (rustdoc: factor out common button CSS)
- #104666 (Migrate alias search result to CSS variables)
- #104674 (Make negative_impl and negative_impl_exists take the right types)
- #104692 (Update test's cfg-if dependency to 1.0)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's
used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all
three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`),
where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them
having partial overlap. I find this makes the code hard to read. It also leads
to various unreachable code paths, and allows invalid values (such as
accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is
now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro
case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and
disallows the invalid values.
Improve spans for RPITIT object-safety errors
No reason why we can't point at the `impl Trait` that causes the object-safety violation.
Also [drive-by: Add is_async fn to hir::IsAsync](c4165f3a96), which touches clippy too.
Return multiple resolutions from `def_path_res`
Changes `def_path_res` to return all the resolutions matching the path rather than the first one (with a namespace hint that covered some cases). This would fix any issues that come up with multiple versions of the same crate being present as they all have the same crate name
It also adds resolution of `impl _ {}` items for local items, and removes struct field resolution as it didn't seem to be used anywhere
I tested it on a local crate and it worked for the multiple crate issue, but I couldn't come up with a test that worked well with `// aux-build`, maybe `// aux-crate` after https://github.com/rust-lang/rust/pull/103266 could work but I'm not sure on that either
changelog: [`disallowed_methods`], [`disallowed_types`], [`disallowed_macros`]: fix path resolution with multiple versions of the same crate
changelog: [`disallowed_methods`]: Resolve methods in `impl`s in the current crate
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
[`fn_params_excessive_bools`] Make it possible to allow the lint at the method level
changelog: FP: [`fn_params_excessive_bools`]: `#[allow]` now works on methods
fix https://github.com/rust-lang/rust-clippy/issues/9687
Tested without committing but `#[allow]`ing now works. Also rewrote the lint to be a late lint while at it :)
r? `@xFrednet`
Add `manual_is_ascii_check` lint
Addresses https://github.com/rust-lang/rust-clippy/issues/9290
This PR adds new lint `manual_is_ascii_check`, which detects comparison with ascii ranges using `matches!` macros.
As I mentioned as following in the Issue;
> Yes, that's true. we'll start small and then grow it.
> So I'll try to handle matches! macro with single range as suggested above.
However during writing first version, I was thinking that the changes to support alphabetic and digits will be small patch, so I made a single PR in hope review cost can be reduced.
changelog: add new lint [`manual_is_ascii_check`]
r? `@xFrednet`
Improve `needless_lifetimes`
This PR makes the following improvements to `needless_lifetimes`.
* It fixes the following false negative, where `foo` is flagged but `bar` is not:
```rust
fn foo<'a>(x: &'a u8, y: &'_ u8) {}
fn bar<'a>(x: &'a u8, y: &'_ u8, z: &'_ u8) {}
```
* It flags more cases, generally. Previously, `needless_borrow` required *all* lifetimes to be used only once. With the changes, individual lifetimes are flagged for being used only once, even if not all lifetimes are.
* Finally, it tries to produce more clear error messages.
changelog: fix `needless_lifetimes` false negative involving functions with multiple unnamed lifetimes
changelog: in `needless_lifetimes`, flag individual lifetimes used only once, rather than require all lifetimes to be used only once
changelog: in `needless_lifetimes`, emit "replace with `'_`" warnings only when applicable, and point to a generic argument
Accept `TyCtxt` instead of `TyCtxtAt` in `Ty::is_*` functions
Functions in answer:
- `Ty::is_freeze`
- `Ty::is_sized`
- `Ty::is_unpin`
- `Ty::is_copy_modulo_regions`
This allows to remove a lot of useless `.at(DUMMY_SP)`, making the code a bit nicer :3
r? `@compiler-errors`
spastorino noticed some silly expressions like `item_id.def_id.def_id`.
This commit renames several `def_id: OwnerId` fields as `owner_id`, so
those expressions become `item_id.owner_id.def_id`.
`item_id.owner_id.local_def_id` would be even clearer, but the use of
`def_id` for values of type `LocalDefId` is *very* widespread, so I left
that alone.
