Our condvar doesn't support setting attributes, like
pthread_condattr_setclock, which the current wait_timeout expects to
have configured.
Switch to a different implementation, following espidf.
Use `fcntl(fd, F_GETFD)` to detect if standard streams are open
In the previous implementation, if the standard streams were open,
but the RLIMIT_NOFILE value was below three, the poll would fail
with EINVAL:
> ERRORS: EINVAL The nfds value exceeds the RLIMIT_NOFILE value.
Switch to the existing fcntl based implementation to avoid the issue.
Fixes#96621.
std::io: Modify some ReadBuf method signatures to return `&mut Self`
This allows using `ReadBuf` in a builder-like style and to setup a `ReadBuf` and
pass it to `read_buf` in a single expression, e.g.,
```
// With this PR:
reader.read_buf(ReadBuf::uninit(buf).assume_init(init_len))?;
// Previously:
let mut buf = ReadBuf::uninit(buf);
buf.assume_init(init_len);
reader.read_buf(&mut buf)?;
```
r? `@sfackler`
cc https://github.com/rust-lang/rust/issues/78485, https://github.com/rust-lang/rust/issues/94741
impl Read and Write for VecDeque<u8>
Implementing `Read` and `Write` for `VecDeque<u8>` fills in the VecDeque api surface where `Vec<u8>` and `Cursor<Vec<u8>>` already impl Read and Write. Not only for completeness, but VecDeque in particular is a very handy mock interface for a TCP echo service, if only it supported Read/Write.
Since this PR is just an impl trait, I don't think there is a way to limit it behind a feature flag, so it's "insta-stable". Please correct me if I'm wrong here, not trying to rush stability.
Remove confusing sentence from `Mutex` docs
The docs were saying something about "statically initializing" the
mutex, and it's not clear what this means. Remove that part to avoid
confusion.
Remove migrate borrowck mode
Closes#58781Closes#43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
Add note to documentation of HashSet::intersection
The functionality of the `std::collections::HashSet::intersection(...)` method was slightly surprising to me so I wanted to take a sec to contribute to the documentation for this method.
I've added a `Note:` section if that is appropriate.
Call the OS function to set the main thread's name on program init
Normally, `Thread::spawn` takes care of setting the thread's name, if
one was provided, but since the main thread wasn't created by calling
`Thread::spawn`, we need to call that function in `std::rt::init`.
This is mainly useful for system tools like debuggers and profilers
which might show the thread name to a user. Prior to these changes, gdb
and WinDbg would show all thread names except the main thread's name to
a user. I've validated that this patch resolves the issue for both
debuggers.
Lazily allocate and initialize pthread locks.
Lazily allocate and initialize pthread locks.
This allows {Mutex, Condvar, RwLock}::new() to be const, while still using the platform's native locks for features like priority inheritance and debug tooling. E.g. on macOS, we cannot directly use the (private) APIs that pthread's locks are implemented with, making it impossible for us to use anything other than pthread while still preserving priority inheritance, etc.
This PR doesn't yet make the public APIs const. That's for a separate PR with an FCP.
Tracking issue: https://github.com/rust-lang/rust/issues/93740
Tweak insert docs
For `{Hash, BTree}Map::insert`, I always have to take a few extra seconds to think about the slight weirdness about the fact that if we "did not" insert (which "sounds" false), we return true, and if we "did" insert, (which "sounds" true), we return false.
This tweaks the doc comments for the `insert` methods of those types (as well as what looks like a rustc internal data structure that I found just by searching the codebase for "If the set did") to first use the "Returns whether _something_" pattern used in e.g. `remove`, where we say that `remove` "returns whether the value was present".
Expose `get_many_mut` and `get_many_unchecked_mut` to HashMap
This pull-request expose the function [`get_many_mut`](https://docs.rs/hashbrown/0.12.0/hashbrown/struct.HashMap.html#method.get_many_mut) and [`get_many_unchecked_mut`](https://docs.rs/hashbrown/0.12.0/hashbrown/struct.HashMap.html#method.get_many_unchecked_mut) from `hashbrown` to the standard library `HashMap` type. They obviously keep the same API and are added under the (new) `map_many_mut` feature.
- `get_many_mut`: Attempts to get mutable references to `N` values in the map at once.
- `get_many_unchecked_mut`: Attempts to get mutable references to `N` values in the map at once, without validating that the values are unique.
