Use `unstable_target_features` when checking inline assembly
This is necessary to properly validate register classes even when the relevant target feature name is still unstable.
Extract a create_wrapper_function for use in allocator shim writing
This deduplicates some logic and makes it easier to follow what wrappers are produced. In the future it may allow moving the code to determine which wrappers to create to cg_ssa.
coverage: Don't convert filename/symbol strings to `CString` for FFI
LLVM APIs are usually perfectly happy to accept pointer/length strings, as long as we supply a suitable length value when creating a `StringRef` or `std::string`.
This lets us avoid quite a few intermediate `CString` copies during coverage codegen. It also lets us use an `IndexSet<Symbol>` (instead of an `IndexSet<CString>`) when building the deduplicated filename table.
feat: `riscv-interrupt-{m,s}` calling conventions
Similar to prior support added for the mips430, avr, and x86 targets this change implements the rough equivalent of clang's [`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking visibility into any non-assembly body of the interrupt handler, have to be very conservative and save the [entire CPU state to the stack frame][full-frame-save]. By instead asking LLVM to only save the registers that it uses, we defer the decision to the tool with the best context: it can more accurately account for the cost of spills if it knows that every additional register used is already at the cost of an implicit spill.
At the LLVM level, this is apparently [implemented by] marking every register as "[callee-save]," matching the semantics of an interrupt handler nicely (it has to leave the CPU state just as it found it after its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes no attempt to e.g. save the state in a user-accessible stack frame. For a full discussion of those challenges and tradeoffs, please refer to [the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM does not expose the "all-saved" function flavor as a calling convention directly, instead preferring to use an attribute that allows for differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be aware of the differences between machine-mode and supervisor-mode interrupts as to why no `riscv-interrupt` calling convention is exposed through rustc, and similarly for why `riscv-interrupt-u` makes no appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Similar to prior support added for the mips430, avr, and x86 targets
this change implements the rough equivalent of clang's
[`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling
e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking
visibility into any non-assembly body of the interrupt handler, have to
be very conservative and save the [entire CPU state to the stack
frame][full-frame-save]. By instead asking LLVM to only save the
registers that it uses, we defer the decision to the tool with the best
context: it can more accurately account for the cost of spills if it
knows that every additional register used is already at the cost of an
implicit spill.
At the LLVM level, this is apparently [implemented by] marking every
register as "[callee-save]," matching the semantics of an interrupt
handler nicely (it has to leave the CPU state just as it found it after
its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes
no attempt to e.g. save the state in a user-accessible stack frame. For
a full discussion of those challenges and tradeoffs, please refer to
[the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM
does not expose the "all-saved" function flavor as a calling convention
directly, instead preferring to use an attribute that allows for
differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be
aware of the differences between machine-mode and supervisor-mode
interrupts as to why no `riscv-interrupt` calling convention is exposed
through rustc, and similarly for why `riscv-interrupt-u` makes no
appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
CFI: Fix error compiling core with LLVM CFI enabled
Fix#90546 by filtering out global value function pointer types from the type tests, and adding the LowerTypeTests pass to the rustc LTO optimization pipelines.
Add hotness data to LLVM remarks
Slight improvement of https://github.com/rust-lang/rust/pull/113040. This makes sure that if PGO is used, remarks generated using `-Zremark-dir` will include the `Hotness` attribute.
r? `@tmiasko`
Fix#90546 by filtering out global value function pointer types from the
type tests, and adding the LowerTypeTests pass to the rustc LTO
optimization pipelines.
Add a new `compare_bytes` intrinsic instead of calling `memcmp` directly
As discussed in #113435, this lets the backends be the place that can have the "don't call the function if n == 0" logic, if it's needed for the target. (I didn't actually *add* those checks, though, since as I understood it we didn't actually need them on known targets?)
Doing this also let me make it `const` (unstable), which I don't think `extern "C" fn memcmp` can be.
cc `@RalfJung` `@Amanieu`
This deduplicates some logic and makes it easier to follow what wrappers
are produced. In the future it may allow moving the code to determine
which wrappers to create to cg_ssa.
cg_llvm: stop identifying ADTs in LLVM IR
This is an extension of https://github.com/rust-lang/rust/pull/94107. It may be a minor perf win.
Fixes#96242.
Now that we use opaque pointers, ADTs can no longer be recursive, so we
do not need to name them. Previously, this would be necessary if you had
a struct like
```rs
struct Foo(Box<Foo>, u64, u64);
```
which would be represented with something like
```ll
%Foo = type { %Foo*, i64, i64 }
```
which is now just
```ll
{ ptr, i64, i64 }
```
r? `@tmiasko`
Coverage FFI types were historically split across two modules, because some of
them were needed by code in `rustc_codegen_ssa`.
Now that all of the coverage codegen code has been moved into
`rustc_codegen_llvm` (#113355), it's possible to move all of the FFI types into
a single module, making it easier to see all of them at once.
Filter out short-lived LLVM diagnostics before they reach the rustc handler
During profiling I saw remark passes being unconditionally enabled: for example `Machine Optimization Remark Emitter`.
The diagnostic remarks enabled by default are [from missed optimizations and opt analyses](https://github.com/rust-lang/rust/pull/113339#discussion_r1259480303). They are created by LLVM, passed to the diagnostic handler on the C++ side, emitted to rust, where they are unpacked, C++ strings are converted to rust, etc.
Then they are discarded in the vast majority of the time (i.e. unless some kind of `-Cremark` has enabled some of these passes' output to be printed).
These unneeded allocations are very short-lived, basically only lasting between the LLVM pass emitting them and the rust handler where they are discarded. So it doesn't hugely impact max-rss, and is only a slight reduction in instruction count (cachegrind reports a reduction between 0.3% and 0.5%) _on linux_. It's possible that targets without `jemalloc` or with a worse allocator, may optimize these less.
It is however significant in the aggregate, looking at the total number of allocated bytes:
- it's the biggest source of allocations according to dhat, on the benchmarks I've tried e.g. `syn` or `cargo`
- allocations on `syn` are reduced by 440MB, 17% (from 2440722647 bytes total, to 2030461328 bytes)
- allocations on `cargo` are reduced by 6.6GB, 19% (from 35371886402 bytes total, to 28723987743 bytes)
Some of these diagnostics objects [are allocated in LLVM](https://github.com/rust-lang/rust/pull/113339#discussion_r1252387484) *before* they're emitted to our diagnostic handler, where they'll be filtered out. So we could remove those in the future, but that will require changing a few LLVM call-sites upstream, so I left a FIXME.
now that remarks are filtered before cg_llvm's diagnostic handler callback
is called, we don't need to do the filtering post c++-to-rust conversion
of the diagnostic.
cleanup: remove pointee types
This can't be merged until the oldest LLVM version we support uses opaque pointers, which will be the case after #114148. (Also note `-Cllvm-args="-opaque-pointers=0"` can technically be used in LLVM 15, though I don't think we should support that configuration.)
I initially hoped this would provide some minor perf win, but in https://github.com/rust-lang/rust/pull/105412#issuecomment-1341224450 it had very little impact, so this is only valuable as a cleanup.
As a followup, this will enable #96242 to be resolved.
r? `@ghost`
`@rustbot` label S-blocked
Operand types are now tracked explicitly, so there is no need to reserve ID 0
for the special always-zero counter.
As part of the renumbering, this change fixes an off-by-one error in the way
counters were counted by the `coverageinfo` query. As a result, functions
should now have exactly the number of counters they actually need, instead of
always having an extra counter that is never used.
Operand types are now tracked explicitly, so there is no need for expression
IDs to avoid counter IDs by descending from `u32::MAX`. Instead they can just
count up from 0, and can be used directly as indices when necessary.
Because the three kinds of operand are now distinguished explicitly, we no
longer need fiddly code to disambiguate counter IDs and expression IDs based on
the total number of counters/expressions in a function.
This does increase the size of operands from 4 bytes to 8 bytes, but that
shouldn't be a big deal since they are mostly stored inside boxed structures,
and the current coverage code is not particularly size-optimized anyway.
Now that we use opaque pointers, ADTs can no longer be recursive, so we
do not need to name them. Previously, this would be necessary if you had
a struct like
```rs
struct Foo(Box<Foo>, u64, u64);
```
which would be represented with something like
```ll
%Foo = type { %Foo*, i64, i64 }
```
which is now just
```ll
{ ptr, i64, i64 }
```
This section name is always constant for a given target, but obtaining it from
LLVM requires a few intermediate allocations. There's no need to do so
repeatedly from inside a per-function loop.
Both GCC and Clang write by default a `.comment` section with compiler
information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only
when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
In the RFC part of this PR it was decided to always add
the information, which gets us closer to other popular compilers.
An opt-out flag like GCC and Clang may be added later on if deemed
necessary.
Implementation-wise, this covers both `ModuleLlvm::new()` and
`ModuleLlvm::new_metadata()` cases by moving the addition to
`context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in
temporary outputs), so this deduplicates it like it is done for
`wasm.custom_sections`. The tests also check this duplication does
not take place.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Prototype: Add unstable `-Z reference-niches` option
MCP: rust-lang/compiler-team#641
Relevant RFC: rust-lang/rfcs#3204
This prototype adds a new `-Z reference-niches` option, controlling the range of valid bit-patterns for reference types (`&T` and `&mut T`), thereby enabling new enum niching opportunities. Like `-Z randomize-layout`, this setting is crate-local; as such, references to built-in types (primitives, tuples, ...) are not affected.
The possible settings are (here, `MAX` denotes the all-1 bit-pattern):
| `-Z reference-niches=` | Valid range |
|:---:|:---:|
| `null` (the default) | `1..=MAX` |
| `size` | `1..=(MAX- size)` |
| `align` | `align..=MAX.align_down_to(align)` |
| `size,align` | `align..=(MAX-size).align_down_to(align)` |
------
This is very WIP, and I'm not sure the approach I've taken here is the best one, but stage 1 tests pass locally; I believe this is in a good enough state to unleash this upon unsuspecting 3rd-party code, and see what breaks.
Support `--print KIND=PATH` command line syntax
As is already done for `--emit KIND=PATH` and `-L KIND=PATH`.
In the discussion of #110785, it was pointed out that `--print KIND=PATH` is nicer than trying to apply the single global `-o` path to `--print`'s output, because in general there can be multiple print requests within a single rustc invocation, and anyway `-o` would already be used for a different meaning in the case of `link-args` and `native-static-libs`.
I am interested in using `--print cfg=PATH` in Buck2. Currently Buck2 works around the lack of support for `--print KIND=PATH` by [indirecting through a Python wrapper script](d43cf3a51a/prelude/rust/tools/get_rustc_cfg.py) to redirect rustc's stdout into the location dictated by the build system.
From skimming Cargo's usages of `--print`, it definitely seems like it would benefit from `--print KIND=PATH` too. Currently it is working around the lack of this by inserting `--crate-name=___ --print=crate-name` so that it can look for a line containing `___` as a delimiter between the 2 other `--print` informations it actually cares about. This is commented as a "HACK" and "abuse". 31eda6f7c3/src/cargo/core/compiler/build_context/target_info.rs (L242) (FYI `@weihanglo` as you dealt with this recently in https://github.com/rust-lang/cargo/pull/11633.)
Mentioning reviewers active in #110785: `@fee1-dead` `@jyn514` `@bjorn3`
Resurrect: rustc_llvm: Add a -Z `print-codegen-stats` option to expose LLVM statistics.
This resurrects PR https://github.com/rust-lang/rust/pull/104000, which has sat idle for a while. And I want to see the effect of stack-move optimizations on LLVM (like https://reviews.llvm.org/D153453) :).
I have applied the changes requested by `@oli-obk` and `@nagisa` https://github.com/rust-lang/rust/pull/104000#discussion_r1014625377 and https://github.com/rust-lang/rust/pull/104000#discussion_r1014642482 in the latest commits.
r? `@oli-obk`
-----
LLVM has a neat [statistics](https://llvm.org/docs/ProgrammersManual.html#the-statistic-class-stats-option) feature that tracks how often optimizations kick in. It's very handy for optimization work. Since we expose the LLVM pass timings, I thought it made sense to expose the LLVM statistics too.
-----
(Edit: fix broken link
(Edit2: fix segmentation fault and use malloc
If `rustc` is built with
```toml
[llvm]
assertions = true
```
Then you can see like
```
rustc +stage1 -Z print-codegen-stats -C opt-level=3 tmp.rs
===-------------------------------------------------------------------------===
... Statistics Collected ...
===-------------------------------------------------------------------------===
3 aa - Number of MayAlias results
193 aa - Number of MustAlias results
531 aa - Number of NoAlias results
...
```
And the current default build emits only
```
$ rustc +stage1 -Z print-codegen-stats -C opt-level=3 tmp.rs
===-------------------------------------------------------------------------===
... Statistics Collected ...
===-------------------------------------------------------------------------===
$
```
This might be better to emit the message to tell assertion flag necessity, but now I can't find how to do that...
Add the `no-builtins` attribute to functions when `no_builtins` is applied at the crate level.
**When `no_builtins` is applied at the crate level, we should add the `no-builtins` attribute to each function to ensure it takes effect in LTO.**
This is also the reason why no_builtins does not take effect in LTO as mentioned in #35540.
Now, `#![no_builtins]` should be similar to `-fno-builtin` in clang/gcc, see https://clang.godbolt.org/z/z4j6Wsod5.
Next, we should make `#![no_builtins]` participate in LTO again. That makes sense, as LTO also takes into consideration function-level instruction optimizations, such as the MachineOutliner. More importantly, when a user writes a large `#![no_builtins]` crate, they would like this crate to participate in LTO as well.
We should also add a function-level no_builtins attribute to allow users to have more control over it. This is similar to Clang's `__attribute__((no_builtin))` feature, see https://clang.godbolt.org/z/Wod6KK6eq. Before implementing this feature, maybe we should discuss whether to support more fine-grained control, such as `__attribute__((no_builtin("memcpy")))`.
Related discussions:
- #109821
- #35540
Next (a separate pull request?):
- [ ] Revert #35637
- [ ] Add a function-level `no_builtin` attribute?
Better diagnostics for dlltool errors.
When dlltool fails, show the full command that was executed. In particular, llvm-dlltool is not very helpful, printing a generic usage message rather than what actually went wrong, so stdout and stderr aren't of much use when troubleshooting.
When dlltool fails, show the full command that was executed. In
particular, llvm-dlltool is not very helpful, printing a generic usage
message rather than what actually went wrong, so stdout and stderr
aren't of much use when troubleshooting.
LLVM has a neat [statistics] feature that tracks how often optimizations kick
in. It's very handy for optimization work. Since we expose the LLVM pass
timings, I thought it made sense to expose the LLVM statistics too.
[statistics]: https://llvm.org/docs/ProgrammersManual.html#the-statistic-class-stats-option
Remove `LLVMRustCoverageHashCString`
Coverage has two FFI functions for computing the hash of a byte string. One takes a ptr/len pair (`LLVMRustCoverageHashByteArray`), and the other takes a NUL-terminated C string (`LLVMRustCoverageHashCString`).
But on closer inspection, the C string version is unnecessary. The calling-side code converts a Rust `&str` into a `CString`, and the C++ code then immediately turns it back into a ptr/len string before actually hashing it. So we can just call the ptr/len version directly instead.
---
This PR also fixes a bug in the C++ declaration of `LLVMRustCoverageHashByteArray`. It should be `size_t`, since that's what is declared and passed on the Rust side, and it's what `StrRef`'s constructor expects to receive on the callee side.
Coverage has two FFI functions for computing the hash of a byte string. One
takes a ptr/len pair, and the other takes a NUL-terminated C string.
But on closer inspection, the C string version is unnecessary. The calling-side
code converts a Rust `&str` into a C string, and the C++ code then immediately
turns it back into a ptr/len string before actually hashing it.
The function body immediately treats it as a slice anyway, so this just makes
it possible to call the hash function with arbitrary read-only byte slices.
Move `TyCtxt::mk_x` to `Ty::new_x` where applicable
Part of rust-lang/compiler-team#616
turns out there's a lot of places we construct `Ty` this is a ridiculously huge PR :S
r? `@oli-obk`
Revert the lexing of `c"…"` string literals
Fixes \[after beta-backport\] #113235.
Further progress is tracked in #113333.
This PR *manually* reverts parts of #108801 (since a git-revert would've been too coarse-grained & messy)
and git-reverts #111647.
CC `@fee1-dead` (#108801) `@klensy` (#111647)
r? `@compiler-errors`
`@rustbot` label F-c_str_literals beta-nominated
Add `-Zremark-dir` unstable flag to write LLVM optimization remarks to YAML
This PR adds an option for `rustc` to emit LLVM optimization remarks to a set of YAML files, which can then be digested by existing tools, like https://github.com/OfekShilon/optview2. When `-Cremark-dir` is passed, and remarks are enabled (`-Cremark=all`), the remarks will be now written to the specified directory, **instead** of being printed to standard error output. The files are named based on the CGU from which they are being generated.
Currently, the remarks are written using the LLVM streaming machinery, directly in the diagnostics handler. It seemed easier than going back to Rust and then form there back to C++ to use the streamer from the diagnostics handler. But there are many ways to implement this, of course, so I'm open to suggestions :)
I included some comments with questions into the code. Also, I'm not sure how to test this.
r? `@tmiasko`
Support for native WASM exceptions
### Motivation
Currently, rustc does not support native WASM exceptions. It does support JavaScript based exceptions for the wasm32-emscripten-target, but this requires back&forth with javascript for many calls, which is very slow.
Native wasm support for exceptions is quite common: Clang+LLVM implemented them years ago, and all major browsers support them by now. They enable zero-cost exceptions, at least with regard to runtime-performance-cost. They may increase startup-time and code size, though.
### Important: This PR does not change default behaviour
Exceptions usually add a lot of code in form of unwinding blocks, increasing the binary size. Most users probably do not want that, especially which regard to web development.
Therefore, wasm exceptions play a similar role as WASM-threads: rustc should support them, like clang does, but users who want to use it have to use some command-line magic like rustflags to opt in.
### What does this PR do?
As stated above, the default behaviour is not changed. It is already possible to opt-in into wasm exceptions using the command line. Unfortunately, the LLVM IR is invalid and the LLVM backend crashes.
```
rustc <sourcefile>
--target wasm32-unknown-unknown
-C panic=unwind
-C llvm-args=-wasm-enable-eh
-C target-feature=+exception-handling
```
As it turns out, LLVM is quite picky when it comes to IR for exception handling. If the IR does not look exactly like it should, some LLVM-assertions fail and the code generation crashes.
This PR adds the necessary modifications to the code generator to make it work. It also adds `exception-handling` as a wasm target feature.
### What this PR does not / what is missing
This PR is not a full fledges solution. It is the first step. A few parts are still missing; however, it is already useable (see next section).
Currently missing:
* The std library has to be adapted. Currently, only [no_std] crates work
* Usually, nested exceptions abort the program (i.e. a panic during the cleanup of another panic). This is currently not done yet.
- Currently, code inside cleanup handlers does not unwind
- To fix this requires a little more work: The code generator currently maintains a single terminate block per function for this. Unfortunately, WASM requires funclet based exception handling. Therefore, we need to create a terminate block per funclet. This is probably not a big problem, but I want to keep this PR simple.
### How to use the compiler given this PR?
This PR does not add any command line flags or features. It uses those which are already there. To compile with exceptions enabled, you need
* to set the panic strategy to unwind, i.e. `-C panic=unwind`
* to enable the exception-handling target feature, i.e. `-C target-feature=+exception-handling`
* to tell LLVM about the exception handling, i.e. `-C llvm-args=-wasm-enable-eh`
Since the standard library has not been adapted, you can only use it in [no_std] crates as of now. The intrinsic `core::intrinsics::r#try` works. To throw exceptions, you need the ```@llvm.wasm.throw``` intrinsic.
I created a sample application which works for me: https://github.com/mirkootter/rust-wasm-demos
This example can be run at https://webassembly.sh
After the last commit, they contain `Option<&OperandBundleDef<'a>>` but
the values are always `Some(_)`. This commit removes the needless
`Option` wrapper. This also simplifies the type signatures of
`LLVMRustBuild{Invoke,Call}`, which were relying on the fact that the
represention of `Option<&T>` is the same as `&T` for non-`None` values.
They never have a length of more than two. So this commit changes them
to `SmallVec<[_; 2]>`.
Also, we possibly push `None` values and then filter those `None` values
out again with `retain`. So this commit removes the `retain` and instead
only pushes the values if they are `Some(_)`.
I don't know why `SmallStr` was used here; some ad hoc profiling showed
this code is not that hot, the string is usually empty, and when it's
not empty it's usually very short. However, the use of a
`SmallStr<1024>` does result in 1024 byte `memcpy` call on each
execution, which shows up when I do `memcpy` profiling. So using a
normal string makes the code both simpler and very slightly faster.
`lookup_debug_loc` finds a file, line, and column, which requires two
binary searches. But this call site only needs the file.
This commit replaces the call with `lookup_source_file`, which does a
single binary search.
`lookup_debug_loc` calls `SourceMap::lookup_line`, which does a binary
search over the files, and then a binary search over the lines within
the found file. It then calls `SourceFile::line_begin_pos`, which redoes
the binary search over the lines within the found file.
This commit removes the second binary search over the lines, instead
getting the line starting pos directly using the result of the first
binary search over the lines.
(And likewise for `get_span_loc`, in the cranelift backend.)
Because tiny CGUs make compilation less efficient *and* result in worse
generated code.
We don't do this when the number of CGUs is explicitly given, because
there are times when the requested number is very important, as
described in some comments within the commit. So the commit also
introduces a `CodegenUnits` type that distinguishes between default
values and user-specified values.
This change has a roughly neutral effect on walltimes across the
rustc-perf benchmarks; there are some speedups and some slowdowns. But
it has significant wins for most other metrics on numerous benchmarks,
including instruction counts, cycles, binary size, and max-rss. It also
reduces parallelism, which is good for reducing jobserver competition
when multiple rustc processes are running at the same time. It's smaller
benchmarks that benefit the most; larger benchmarks already have CGUs
that are all larger than the minimum size.
Here are some example before/after CGU sizes for opt builds.
- html5ever
- CGUs: 16, mean size: 1196.1, sizes: [3908, 2992, 1706, 1652, 1572,
1136, 1045, 948, 946, 938, 579, 471, 443, 327, 286, 189]
- CGUs: 4, mean size: 4396.0, sizes: [6706, 3908, 3490, 3480]
- libc
- CGUs: 12, mean size: 35.3, sizes: [163, 93, 58, 53, 37, 8, 2 (x6)]
- CGUs: 1, mean size: 424.0, sizes: [424]
- tt-muncher
- CGUs: 5, mean size: 1819.4, sizes: [8508, 350, 198, 34, 7]
- CGUs: 1, mean size: 9075.0, sizes: [9075]
Note that CGUs of size 100,000+ aren't unusual in larger programs.
Removed use of iteration through a HashMap/HashSet in rustc_incremental and replaced with IndexMap/IndexSet
This allows for the `#[allow(rustc::potential_query_instability)]` in rustc_incremental to be removed, moving towards fixing #84447 (although a LOT more modules have to be changed to fully resolve it). Only HashMaps/HashSets that are being iterated through have been modified (although many structs and traits outside of rustc_incremental had to be modified as well, as they had fields/methods that involved a HashMap/HashSet that would be iterated through)
I'm making a PR for just 1 module changed to test for performance regressions and such, for future changes I'll either edit this PR to reflect additional modules being converted, or batch multiple modules of changes together and make a PR for each group of modules.
use c literals in compiler and library
Use c literals #108801 in compiler and library
currently blocked on:
* <strike>rustfmt: don't know how to format c literals</strike> nope, nightly one works.
* <strike>bootstrap</strike>
r? `@ghost`
`@rustbot` blocked
These tend to have special handling in a bunch of places anyway, so the variant helps remember that. And I think it's easier to grok than non-Scalar Aggregates sometimes being `Immediates` (like I got wrong and caused 109992). As a minor bonus, it means we don't need to generate poison LLVM values for them to pass around in `OperandValue::Immediate`s.
Optimize scalar and scalar pair representations loaded from ByRef in llvm
in https://github.com/rust-lang/rust/pull/105653 I noticed that we were generating suboptimal LLVM IR if we had a `ConstValue::ByRef` that could be represented by a `ScalarPair`. Before https://github.com/rust-lang/rust/pull/105653 this is probably rare, but after it, every slice will go down this suboptimal code path that requires LLVM to untangle a bunch of indirections and translate static allocations that are only used once to read a scalar pair from.
Adds support for LLVM [SafeStack] which provides backward edge control
flow protection by separating the stack into two parts: data which is
only accessed in provable safe ways is allocated on the normal stack
(the "safe stack") and all other data is placed in a separate allocation
(the "unsafe stack").
SafeStack support is enabled by passing `-Zsanitizer=safestack`.
[SafeStack]: https://clang.llvm.org/docs/SafeStack.html
Support #[global_allocator] without the allocator shim
This makes it possible to use liballoc/libstd in combination with `--emit obj` if you use `#[global_allocator]`. This is what rust-for-linux uses right now and systemd may use in the future. Currently they have to depend on the exact implementation of the allocator shim to create one themself as `--emit obj` doesn't create an allocator shim.
Note that currently the allocator shim also defines the oom error handler, which is normally required too. Once `#![feature(default_alloc_error_handler)]` becomes the only option, this can be avoided. In addition when using only fallible allocator methods and either `--cfg no_global_oom_handling` for liballoc (like rust-for-linux) or `--gc-sections` no references to the oom error handler will exist.
To avoid this feature being insta-stable, you will have to define `__rust_no_alloc_shim_is_unstable` to avoid linker errors.
(Labeling this with both T-compiler and T-lang as it originally involved both an implementation detail and had an insta-stable user facing change. As noted above, the `__rust_no_alloc_shim_is_unstable` symbol requirement should prevent unintended dependence on this unstable feature.)
Rather than returning an array of features from to_llvm_features, return a structure that contains
the dependencies. This also contains metadata on how the features depend on each other to allow for
the correct enabling and disabling.
Some features that are tied together only make sense to be folded
together when enabling the feature. For example on AArch64 sve and
neon are tied together, however it doesn't make sense to disable neon
when disabling sve.
In #91608 the fp-armv8 feature was removed as it's tied to the neon
feature. However disabling neon didn't actually disable the use of
floating point registers and instructions, for this `-fp-armv8` is
required.
Fix dependency tracking for debugger visualizers
This PR fixes dependency tracking for debugger visualizer files by changing the `debugger_visualizers` query to an `eval_always` query that scans the AST while it is still available. This way the set of visualizer files is already available when dep-info is emitted. Since the query is turned into an `eval_always` query, dependency tracking will now reliably detect changes to the visualizer script files themselves.
TODO:
- [x] perf.rlo
- [x] Needs a bit more documentation in some places
- [x] Needs regression test for the incr. comp. case
Fixes https://github.com/rust-lang/rust/issues/111226
Fixes https://github.com/rust-lang/rust/issues/111227
Fixes https://github.com/rust-lang/rust/issues/111295
r? `@wesleywiser`
cc `@gibbyfree`
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
Remove the ThinLTO CU hack
This reverts #46722, commit e0ab5d5feb.
Since #111167, commit 10b69dde3f, we are
generating DWARF subprograms in a way that is meant to be more compatible
with LLVM's expectations, so hopefully we don't need this workaround
rewriting CUs anymore.
Remove misleading target feature aliases
Fixes#100752. This is a follow up to #103750. These aliases could not be completely removed until rust-lang/stdarch#1355 landed.
cc `@Amanieu`
CFI: Fix SIGILL reached via trait objects
Fix#106547 by transforming the concrete self into a reference to a trait object before emitting type metadata identifiers for trait methods.
You will need to add the following as replacement for the old __rust_*
definitions when not using the alloc shim.
#[no_mangle]
static __rust_no_alloc_shim_is_unstable: u8 = 0;
This makes it possible to use liballoc/libstd in combination with
`--emit obj` if you use `#[global_allocator]`. Making it work for the
default libstd allocator would require weak functions, which are not
well supported on all systems.
