Also an fix issue with tuple type names where we can't cast to them in
natvis (required by the visualizer for `HashMap`) because of
peculiarities with the natvis expression evaluator.
Add support for leaf function frame pointer elimination
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Add suggestions for "undefined reference" link errors
This adds a suggestion for "undefined reference to ..." linking errors to install or specify the location to an external library. Since there is no defined error format for linkers, we just check if there was a failure and if that failure contains the string `undefined reference to`. This also makes it impossible to test this, since the output depends on the system linker. The output now looks like:
```
error: linking with `cc` failed: exit status: 1
|
= note: "cc" "-m64" "linking_failure.linking_failure.7rcbfp3g-cgu.0.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.1.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.2.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.3.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.4.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.5.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.6.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.7.rcgu.o" "linking_failure.linking_failure.7rcbfp3g-cgu.8.rcgu.o" "linking_failure.53u64zklswtfazes.rcgu.o" "-Wl,--as-needed" "-L" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib" "-Wl,--start-group" "-Wl,-Bstatic" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd-01ce3ba5c629d02f.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libpanic_unwind-f1f2102409186354.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libminiz_oxide-1e8b6b56a999f838.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libadler-d0e93eb4e14f1d19.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libobject-1d7e39d75d082b43.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libaddr2line-ade42e945045b261.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libgimli-1a65064fccf4ebc1.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd_detect-4d699c310fdfe72d.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_demangle-1cafa68a696ec800.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libhashbrown-e9f1c8c4dab2f046.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_std_workspace_alloc-ecc1a743be25c7f7.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libunwind-e074031c4b66b6b6.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcfg_if-9aa6ed9f1d3bfd53.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/liblibc-7862bf96c2250ca0.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/liballoc-f02ce0dc7895b5fd.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_std_workspace_core-3af9c60917570521.rlib" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcore-ca16fc7bb3645684.rlib" "-Wl,--end-group" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcompiler_builtins-d8e1a5b7299604cc.rlib" "-Wl,-Bdynamic" "-lgcc_s" "-lutil" "-lrt" "-lpthread" "-lm" "-ldl" "-lc" "-Wl,--eh-frame-hdr" "-Wl,-znoexecstack" "-L" "/home/smit/rustc-dev/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib" "-o" "linking_failure" "-Wl,--gc-sections" "-pie" "-Wl,-zrelro" "-Wl,-znow" "-nodefaultlibs"
= note: /usr/bin/ld: linking_failure.linking_failure.7rcbfp3g-cgu.3.rcgu.o: in function `linking_failure::main':
linking_failure.7rcbfp3g-cgu.3:(.text._ZN15linking_failure4main17h52b6e3052e444479E+0x3): undefined reference to `doesnt_exist_thiwthwfyl'
clang: error: linker command failed with exit code 1 (use -v to see invocation)
= help: some `extern` functions couldn't be found; you may need to install or specify the path to some dependencies
= note: use the -L flag to specify the library lookup path
= note: use the cargo:rustc-link-search directive to specify the library lookup path with Cargo (see https://doc.rust-lang.org/cargo/reference/build-scripts.html#rustc-link-search)
error: aborting due to previous error
```
There are several cases where names of types and functions in the debug info are either ambiguous, or not helpful, such as including ambiguous placeholders (e.g., `{{impl}}`, `{{closure}}` or `dyn _'`) or dropping qualifications (e.g., for dynamic types).
Instead, each debug symbol name should be unique and useful:
* Include disambiguators for anonymous `DefPathDataName` (closures and generators), and unify their formatting when used as a path-qualifier vs item being qualified.
* Qualify the principal trait for dynamic types.
* If there is no principal trait for a dynamic type, emit all other traits instead.
* Respect the `qualified` argument when emitting ref and pointer types.
* For implementations, emit the disambiguator.
* Print const generics when emitting generic parameters or arguments.
Additionally, when targeting MSVC, its debugger treats many command arguments as C++ expressions, even when the argument is defined to be a symbol name. As such names in the debug info need to be more C++-like to be parsed correctly:
* Avoid characters with special meaning (`#`, `[`, `"`, `+`).
* Never start a name with `<` or `{` as this is treated as an operator.
* `>>` is always treated as a right-shift, even when parsing generic arguments (so add a space to avoid this).
* Emit function declarations using C/C++ style syntax (e.g., leading return type).
* Emit arrays as a synthetic `array$<type, size>` type.
* Include a `$` in all synthetic types as this is a legal character for C++, but not Rust (thus we avoid collisions with user types).
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Change vtable memory representation to use tcx allocated allocations.
This fixes https://github.com/rust-lang/rust/issues/86324. However i suspect there's more to change before it can land.
r? `@bjorn3`
cc `@rust-lang/miri`
Do not emit alloca for ZST locals with multiple assignments
This extends 35566bfd7d to additionally stop emitting unnecessary allocas for zero sized locals that are assigned multiple times.
When rebuilding the standard library with `-Zbuild-std` this reduces the number of locals that require an allocation from 62315 to 61767.
std: Stabilize wasm simd intrinsics
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
This commit performs two changes to stabilize Rust support for
WebAssembly simd intrinsics:
* The stdarch submodule is updated to pull in rust-lang/stdarch#1179.
* The `wasm_target_feature` feature gate requirement for the `simd128`
feature has been removed, stabilizing the name `simd128`.
This should conclude the FCP started on #74372 and...
Closes#74372
MVP for using rust-lld as part of cc
Will fix#71519. I need to figure out how to write a test showing that lld is used instead of whatever linker cc normally uses. When I manually run rustc using `echo 'fn main() {}' | RUSTC_LOG=rustc_codegen_ssa:🔙:link=debug ./rustc -Clinker-flavor=gcc-lld --crate-type bin -Clink-arg=-Wl,-v` (thanks to bjorn3 on Zulip), I can see that lld is used, but I'm not sure how to inspect that output in a test.
Use preorder traversal when checking for SSA locals
Traverse blocks in topological sort of dominance partial order, to ensure that
local analyzer correctly identifies locals that are already in static single
assignment form, while avoiding dependency on implicit numeric order of blocks.
When rebuilding the standard library, this change reduces the number of locals
that require an alloca from 62452 to 62348.
ignore test if rust-lld not found
create ld -> rust-lld symlink at build time instead of run time
for testing in ci
copy instead of symlinking
remove linux check
test for linker, suggestions from bjorn3
fix overly restrictive lld matcher
use -Zgcc-ld flag instead of -Clinker-flavor
refactor code adding lld to gcc path
revert ci changes
suggestions from petrochenkov
rename gcc_ld to gcc-ld in dirs
As reported in the stabilization issue, MacOS' linker doesn't support the `-s` and `-S` flags to strip symbols anymore. However, the os ships a separated tool to perform these operations.
This change allows the compiler to use that tool after a target has been compiled to strip symbols.
For rationale, see: https://github.com/rust-lang/rust/issues/72110#issuecomment-641169818
For option selection, see: https://www.unix.com/man-page/osx/1/strip/
Signed-off-by: David Calavera <david.calavera@gmail.com>
Remove the install prefix from the rpath set when using -Crpath
It was broken anyway for rustup installs and nobody seems to have noticed.
Fixes https://github.com/rust-lang/rust/issues/82392
Unify duplicate linker_and_flavor methods in rustc_codegen_{cranelift,ssa}.
The two methods were exactly the same so this removes the cranelift copy. This will help make sure both they don't get out of sync.
Driver improvements
This PR contains a couple of cleanups for the driver and a few small improvements for the custom codegen backend interface. It also implements `--version` and `-Cpasses=list` support for custom codegen backends.
- Combine all native library arguments together, to simplify potential support for library deduplication and similar things
- Split arguments into order-independent and order-dependent, to define more precisely what (pre,post,late)-link-args mean
Tweak wasm_base target spec to indicate linker is not GNU and update linker inferring logic for wasm-ld.
Reported via [Zulip](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/wasi.20linker.20unknown.20argument.3A.20--as-needed): we try passing `--as-needed` to the linker if it's GNU ld which `wasm-ld` is not. Usually this isn't an issue for wasm as we would use the WasmLd linker driver but because the linker in question (`wasm32-unknown-wasi-wasm-ld`) ended with `-ld` our linker inferring [logic](f64503eb55/compiler/rustc_codegen_ssa/src/back/link.rs (L957-L1040)) used the `GccLinker` implementations. (UPD: The linker inferring logic actually didn't apply in this case because the linker is actually invoked through gcc in the reported issue. But it's still worth updating the logic I think.)
This change then has 2 parts:
1. Update wasm_base target spec to indicate `linker_is_gnu: false` plus a few additions of `target.is_like_wasm` to handle flags `wasm-ld` does in fact support.
2. Improve the linker detection logic to properly determine the correct flavor of wasm linker we're using when we can.
We need to add the new `target.is_like_wasm` branches to handle the case where the "linker" used could be something like clang which would then under the hood call wasm-ld.
Preserve metadata w/ Solaris-like linkers.
#84468 moved the `-zignore` linker flag from the `gc_sections` method to `add_as_needed` which is more accurate but Solaris-style linkers will also end up removing an unreferenced ELF sections [1]. This had the unfortunate side effect of causing the `.rustc` section (which has the metada) to be removed which could cause issues when trying to link against the resulting crates or use proc macros.
Since the `-zignore` is positional, we fix this by moving the metadata objects to before the flag.
[1] Specifically a section is considered unreferenced if:
* The section is allocatable
* No other sections bind to (relocate) to this section
* The section provides no global symbols
https://docs.oracle.com/cd/E19683-01/817-3677/6mj8mbtbs/index.html#chapter4-19
Partial support for raw-dylib linkage
First cut of functionality for issue #58713: add support for `#[link(kind = "raw-dylib")]` on `extern` blocks in lib crates compiled to .rlib files. Does not yet support `#[link_name]` attributes on functions, or the `#[link_ordinal]` attribute, or `#[link(kind = "raw-dylib")]` on `extern` blocks in bin crates; I intend to publish subsequent PRs to fill those gaps. It's also not yet clear whether this works for functions in `extern "stdcall"` blocks; I also intend to investigate that shortly and make any necessary changes as a follow-on PR.
This implementation calls out to an LLVM function to construct the actual `.idata` sections as temporary `.lib` files on disk and then links those into the generated .rlib.
BPF target support
This adds `bpfel-unknown-none` and `bpfeb-unknown-none`, two new no_std targets that generate little and big endian BPF. The approach taken is very similar to the cuda target, where `TargetOptions::obj_is_bitcode` is enabled and code generation is done by the linker.
I added the targets to `dist-various-2`. There are [some tests](https://github.com/alessandrod/bpf-linker/tree/main/tests/assembly) in bpf-linker and I'm planning to add more. Those are currently not ran as part of rust CI.
Remove special handling of `box_free` from `LocalAnalyzer`
The special casing of `box_free` predates the use of dominators in
analyzer. It is no longer necessary now that analyzer verifies that
the first assignment dominates all uses.
This does not yet support #[link_name] attributes on functions, the #[link_ordinal]
attribute, #[link(kind = "raw-dylib")] on extern blocks in bin crates, or
stdcall functions on 32-bit x86.
rustc: Store metadata-in-rlibs in object files
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
For extern providers, both provide and provide_extern are called.
wasm_import_module_map is already provided in provide, so it doesn't
need to be provided in provide_extern.
Reland - Report coverage `0` of dead blocks
Fixes: #84018
With `-Z instrument-coverage`, coverage reporting of dead blocks
(for example, blocks dropped because a conditional branch is dropped,
based on const evaluation) is now supported.
Note, this PR relands an earlier, reverted PR that failed when compiling
generators. The prior issues with generators has been resolved and a new
test was added to prevent future regressions.
Check out the resulting changes to test coverage of dead blocks in the
test coverage reports in this PR.
r? `@tmandry`
fyi: `@wesleywiser`
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
Previously, we would generate a single struct with the layout of the
dataful variant plus an extra field whose name contained the value of
the niche (this would only really work for things like `Option<&_>`
where we can determine that the `None` case maps to `0` but for enums
that have multiple tag only variants, this doesn't work).
Now, we generate a union of two structs, one which is the layout of the
dataful variant and one which just has a way of reading the
discriminant. We also generate an enum which maps the discriminant value
to the tag only variants.
We also encode information about the range of values which correspond to
the dataful variant in the type name and then use natvis to determine
which union field we should display to the user.
As a result of this change, all niche-layout enums render correctly in
WinDbg and Visual Studio!
Fixes: #84018
With `-Z instrument-coverage`, coverage reporting of dead blocks
(for example, blocks dropped because a conditional branch is dropped,
based on const evaluation) is now supported.
Note, this PR relands an earlier, reverted PR that failed when compiling
generators. The prior issues with generators has been resolved and a new
test was added to prevent future regressions.
Check out the resulting changes to test coverage of dead blocks in the
test coverage reports in this PR.
The special casing of `box_free` predates the use of dominators in
analyzer. It is no longer necessary now that analyzer verifies that
the first assignment dominates all uses.
Update cc
Recent commits have improved `cc`'s finding of MSVC tools on Windows. In particular it should help to address these issues: #83043 and #43468
Update list of allowed aarch64 features
I recently added these features to std_detect for aarch64 linux, pending [review](https://github.com/rust-lang/stdarch/pull/1146).
I have commented any features not supported by LLVM 9, the current minimum version for Rust. Some (PAuth at least) were renamed between 9 & 12 and I've left them disabled. TME, however, is not in LLVM 9 but I've left it enabled.
See https://github.com/rust-lang/stdarch/issues/993
Only pass --[no-]gc-sections if linker is GNU ld.
Fixes a regression from #84468 where linking now fails with solaris linkers. LinkerFlavor::Gcc does not always mean GNU ld specifically. And in the case of at least the solaris ld in illumos, that flag is unrecognized and will cause the linking step to fail.
Even though removing the `is_like_solaris` branch from `gc_sections` in #84468 made sense as `-z ignore/record` are more analogous to the `--[no-]-as-needed` flags, it inadvertently caused solaris linkers to be passed the `--gc-sections` flag. So let's just change it to be more explicit about when we pass those flags.
Remove CrateNum parameter for queries that only work on local crate
The pervasive `CrateNum` parameter is a remnant of the multi-crate rustc idea.
Using `()` as query key in those cases avoids having to worry about the validity of the query key.
Remove support for floating-point constants in asm!
Floating-point constants aren't very useful anyways and this simplifies
the code since the type check can now be done in typeck.
cc `@rust-lang/wg-inline-asm`
r? `@nagisa`
rustc_codegen_ssa: generate MSVC cleanup pads on demand, like GNU landing pads.
This unblocks #84993 in terms of codegen tests, as it brings the MSVC-style (`cleanup_pad`) EH (LLVM) block order in line with the GNU-style (`landing_pad`) EH (LLVM) block order, by having both of them be on-demand (instead of MSVC-style being eager and GNU-style lazy/on-demand).
It also unifies the two implementations a bit, similar to #84699, but in the opposite direction (as that attempt made both kinds of EH pads eagerly built).
~~Opening as draft because I haven't done enough Windows testing just yet, of both this PR, and of #84993 rebased on it.~~ (**EDIT**: seems to be working as expected)
r? `@nagisa`
coverage bug fixes and some refactoring
This replaces the relevant commits (2 and 3) from PR #85082, and also corrects an error querying for coverageinfo.
1. `coverageinfo` query needs to use the same MIR as codegen
I ran into an error trying to fix dead block coverage and realized the
`coverageinfo` query is getting a different MIR compared to the
codegenned MIR, which can sometimes be a problem during mapgen.
I changed that query to use the `InstandeDef` (which includes the
generic parameter substitutions, prosibly specific to const params)
instead of the `DefId` (without unknown/default const substitutions).
2. Simplified body_span and filtered span code
Some code cleanup extracted from future (but unfinished) commit to fix
coverage in attr macro functions.
3. Spanview needs the relevant body_span used for coverage
The coverage body_span doesn't always match the function body_span.
r? ```@tmandry```
Use the object crate for metadata reading
This allows sharing the metadata reader between cg_llvm, cg_clif and other codegen backends.
This is not currently useful for rlib reading with cg_spirv ([rust-gpu](https://github.com/EmbarkStudios/rust-gpu/)) as it uses tar rather than ar as .rlib format, but it is useful for dylib reading required for loading proc macros. (cc `@eddyb)`
The object crate is already trusted as dependency of libstd through backtrace. As far as I know it supports reading all object file formats used by targets for which we support rust dylibs with crate metadata, but I am not certain. If this happens to not be the case, I could keep using LLVM for reading dylib metadata.
Marked as WIP for a perf run and as it is based on #83637.
LinkerFlavor::Gcc does not always mean GNU ld specifically. And in the
case of at least the solaris ld in illumos, that flag is unrecognized
and will cause the linking step to fail.
I ran into an error trying to fix dead block coverage and realized the
`coverageinfo` query is getting a different MIR compared to the
codegenned MIR, which can sometimes be a problem during mapgen.
I changed that query to use the `InstandeDef` (which includes the
generic parameter substitutions, prosibly specific to const params)
instead of the `DefId` (without unknown/default const substitutions).
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
Add primary marker on codegen unit and generate main wrapper on primary codegen.
This is the codegen part of changes extracted from #84062.
This add a marker called `primary` on each codegen units, where exactly one codegen unit will be `primary = true` at a time. This specific codegen unit will take charge of generating `main` wrapper when `main` is imported from a foreign crate after the implementation of RFC 1260.
cc #28937
I'm not sure who should i ask for review for codegen changes, so feel free to reassign.
r? `@nagisa`
Under some conditions, the toolchain will produce a sequence of linker
arguments that result in a NEEDED list that puts libc before libgcc_s;
e.g.,
[0] NEEDED 0x2046ba libc.so.1
[1] NEEDED 0x204723 libm.so.2
[2] NEEDED 0x204736 libsocket.so.1
[3] NEEDED 0x20478b libumem.so.1
[4] NEEDED 0x204763 libgcc_s.so.1
Both libc and libgcc_s provide an unwinder implementation, but libgcc_s
provides some extra symbols upon which Rust directly depends. If libc
is first in the NEEDED list we will find some of those symbols in libc
but others in libgcc_s, resulting in undefined behaviour as the two
implementations do not use compatible interior data structures.
This solution is not perfect, but is the simplest way to produce correct
binaries on illumos for now.
Fix#84467 linker_args with --target=sparcv9-sun-solaris
Trying to cross-compile for sparcv9-sun-solaris
getting a error message for -zignore
Introduced when -z -ignore was seperated here
22d0ab0
No formatting done
Reproduce
``` bash
rustup target add sparcv9-sun-solaris
cargo new --bin hello && cd hello && cargo run --target=sparcv9-sun-solaris
```
config.toml
[target.sparcv9-sun-solaris]
linker = "gcc"
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
Moved -z ignore to add_as_needed
Trying to cross-compile for sparcv9-sun-solaris
getting an error message for -zignore
Introduced when -z -ignore was separated here
22d0ab0
No formatting done
Reproduce
``` bash
rustup target add sparcv9-sun-solaris
cargo new --bin hello && cd hello && cargo run --target=sparcv9-sun-solaris
```
config.toml
[target.sparcv9-sun-solaris]
linker = "gcc"
Implement RFC 1260 with feature_name `imported_main`.
This is the second extraction part of #84062 plus additional adjustments.
This (mostly) implements RFC 1260.
However there's still one test case failure in the extern crate case. Maybe `LocalDefId` doesn't work here? I'm not sure.
cc https://github.com/rust-lang/rust/issues/28937
r? `@petrochenkov`
Update grab bag
This PR slides a bunch of crate versions forward until suddenly a bunch of deps fall out of the tree!
In doing so this mostly picks up a version bump in the `redox_users` crate which makes most of the features default to optional.
crossbeam-utils 0.7 => 0.8.3 (where applicable)
https://github.com/crossbeam-rs/crossbeam/blob/master/crossbeam-utils/CHANGELOG.md
directories 3.0.1 => 3.0.2
ignore 0.4.16 => 0.4.17
tempfile 3.0.5 => tempfile 3.2
Removes constant_time_eq from deps exceptions
Removes arrayref from deps exceptions
And also removes:
- blake2b_simd
- const_fn (the package, not the feature)
- constant_time_eq
- redox_users 0.3.4
- rust-argon2
rustc: Use LLVM's new saturating float-to-int intrinsics
This commit updates rustc, with an applicable LLVM version, to use
LLVM's new `llvm.fpto{u,s}i.sat.*.*` intrinsics to implement saturating
floating-point-to-int conversions. This results in a little bit tighter
codegen for x86/x86_64, but the main purpose of this is to prepare for
upcoming changes to the WebAssembly backend in LLVM where wasm's
saturating float-to-int instructions will now be implemented with these
intrinsics.
This change allows simplifying a good deal of surrounding code, namely
removing a lot of wasm-specific behavior. WebAssembly no longer has any
special-casing of saturating arithmetic instructions and the need for
`fptoint_may_trap` is gone and all handling code for that is now
removed. This means that the only wasm-specific logic is in the
`fpto{s,u}i` instructions which only get used for "out of bounds is
undefined behavior". This does mean that for the WebAssembly target
specifically the Rust compiler will no longer be 100% compatible with
pre-LLVM 12 versions, but it seems like that's unlikely to be relied on
by too many folks.
Note that this change does immediately regress the codegen of saturating
float-to-int casts on WebAssembly due to the specialization of the LLVM
intrinsic not being present in our LLVM fork just yet. I'll be following
up with an LLVM update to pull in those patches, but affects a few other
SIMD things in flight for WebAssembly so I wanted to separate this change.
Eventually the entire `cast_float_to_int` function can be removed when
LLVM 12 is the minimum version, but that will require sinking the
complexity of it into other backends such as Cranelfit.
This commit updates rustc, with an applicable LLVM version, to use
LLVM's new `llvm.fpto{u,s}i.sat.*.*` intrinsics to implement saturating
floating-point-to-int conversions. This results in a little bit tighter
codegen for x86/x86_64, but the main purpose of this is to prepare for
upcoming changes to the WebAssembly backend in LLVM where wasm's
saturating float-to-int instructions will now be implemented with these
intrinsics.
This change allows simplifying a good deal of surrounding code, namely
removing a lot of wasm-specific behavior. WebAssembly no longer has any
special-casing of saturating arithmetic instructions and the need for
`fptoint_may_trap` is gone and all handling code for that is now
removed. This means that the only wasm-specific logic is in the
`fpto{s,u}i` instructions which only get used for "out of bounds is
undefined behavior". This does mean that for the WebAssembly target
specifically the Rust compiler will no longer be 100% compatible with
pre-LLVM 12 versions, but it seems like that's unlikely to be relied on
by too many folks.
Note that this change does immediately regress the codegen of saturating
float-to-int casts on WebAssembly due to the specialization of the LLVM
intrinsic not being present in our LLVM fork just yet. I'll be following
up with an LLVM update to pull in those patches, but affects a few other
SIMD things in flight for WebAssembly so I wanted to separate this change.
Eventually the entire `cast_float_to_int` function can be removed when
LLVM 12 is the minimum version, but that will require sinking the
complexity of it into other backends such as Cranelfit.
The issue was that the resulting debuginfo was too complex for LLVM to
translate into CodeView records correctly. As a result, it simply
ignored the debuginfo which meant Windows debuggers could not display
any closed over variables when stepping inside a closure.
This fixes that by spilling additional variables to the stack so that
the resulting debuginfo is simple (just `*my_variable.dbg.spill`) and
LLVM can generate the correct CV records.
Use AnonConst for asm! constants
This replaces the old system which used explicit promotion. See #83169 for more background.
The syntax for `const` operands is still the same as before: `const <expr>`.
Fixes#83169
Because the implementation is heavily based on inline consts, we suffer from the same issues:
- We lose the ability to use expressions derived from generics. See the deleted tests in `src/test/ui/asm/const.rs`.
- We are hitting the same ICEs as inline consts, for example #78174. It is unlikely that we will be able to stabilize this before inline consts are stabilized.
Use FromStr trait for number option parsing
Replace `parse_uint` with generic `parse_number` based on `FromStr`.
Use it for parsing inlining threshold to avoid casting later.
Add an Mmap wrapper to rustc_data_structures
This wrapper implements StableAddress and falls back to directly reading the file on wasm32.
Taken from #83640, which I will close due to the perf regression.
Translate counters from Rust 1-based to LLVM 0-based counter ids
A colleague contacted me and asked why Rust's counters start at 1, when
Clangs appear to start at 0. There is a reason why Rust's internal
counters start at 1 (see the docs), and I tried to keep them consistent
when codegenned to LLVM's coverage mapping format. LLVM should be
tolerant of missing counters, but as my colleague pointed out,
`llvm-cov` will silently fail to generate a coverage report for a
function based on LLVM's assumption that the counters are 0-based.
See:
https://github.com/llvm/llvm-project/blob/main/llvm/lib/ProfileData/Coverage/CoverageMapping.cpp#L170
Apparently, if, for example, a function has no branches, it would have
exactly 1 counter. `CounterValues.size()` would be 1, and (with the
1-based index), the counter ID would be 1. This would fail the check
and abort reporting coverage for the function.
It turns out that by correcting for this during coverage map generation,
by subtracting 1 from the Rust Counter ID (both when generating the
counter increment intrinsic call, and when adding counters to the map),
some uncovered functions (including in tests) now appear covered! This
corrects the coverage for a few tests!
r? `@tmandry`
FYI: `@wesleywiser`
A colleague contacted me and asked why Rust's counters start at 1, when
Clangs appear to start at 0. There is a reason why Rust's internal
counters start at 1 (see the docs), and I tried to keep them consistent
when codegenned to LLVM's coverage mapping format. LLVM should be
tolerant of missing counters, but as my colleague pointed out,
`llvm-cov` will silently fail to generate a coverage report for a
function based on LLVM's assumption that the counters are 0-based.
See:
https://github.com/llvm/llvm-project/blob/main/llvm/lib/ProfileData/Coverage/CoverageMapping.cpp#L170
Apparently, if, for example, a function has no branches, it would have
exactly 1 counter. `CounterValues.size()` would be 1, and (with the
1-based index), the counter ID would be 1. This would fail the check
and abort reporting coverage for the function.
It turns out that by correcting for this during coverage map generation,
by subtracting 1 from the Rust Counter ID (both when generating the
counter increment intrinsic call, and when adding counters to the map),
some uncovered functions (including in tests) now appear covered! This
corrects the coverage for a few tests!
linker: Use `--as-needed` by default when linker supports it
Do it in a centralized way in `link.rs` instead of individual target specs.
Majority of relevant target specs were already passing it.
coverage bug fixes and optimization support
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
FYI: `@wesleywiser`
r? `@tmandry`
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
Make source-based code coverage compatible with MIR inlining
When codegenning code coverage use the instance that coverage data was
originally generated for, to ensure basic level of compatibility with
MIR inlining.
Fixes#83061
Implement (but don't use) valtree and refactor in preparation of use
This PR does not cause any functional change. It refactors various things that are needed to make valtrees possible. This refactoring got big enough that I decided I'd want it reviewed as a PR instead of trying to make one huge PR with all the changes.
cc `@rust-lang/wg-const-eval` on the following commits:
* 2027184 implement valtree
* eeecea9 fallible Scalar -> ScalarInt
* 042f663 ScalarInt convenience methods
cc `@eddyb` on ef04a6d
cc `@rust-lang/wg-mir-opt` for cf1700c (`mir::Constant` can now represent either a `ConstValue` or a `ty::Const`, and it is totally possible to have two different representations for the same value)
When codegenning code coverage use the instance that coverage data was
originally generated for, to ensure basic level of compatibility with
MIR inlining.
Remove the -Zinsert-sideeffect
This removes all of the code we had in place to work-around LLVM's
handling of forward progress. From this removal excluded is a workaround
where we'd insert a `sideeffect` into clearly infinite loops such as
`loop {}`. This code remains conditionally effective when the LLVM
version is earlier than 12.0, which fixed the forward progress related
miscompilations at their root.
This removes all of the code we had in place to work-around LLVM's
handling of forward progress. From this removal excluded is a workaround
where we'd insert a `sideeffect` into clearly infinite loops such as
`loop {}`. This code remains conditionally effective when the LLVM
version is earlier than 12.0, which fixed the forward progress related
miscompilations at their root.
Store HIR attributes in a side table
Same idea as #72015 but for attributes.
The objective is to reduce incr-comp invalidations due to modified attributes.
Notably, those due to modified doc comments.
Implementation:
- collect attributes during AST->HIR lowering, in `LocalDefId -> ItemLocalId -> &[Attributes]` nested tables;
- access the attributes through a `hir_owner_attrs` query;
- local refactorings to use this access;
- remove `attrs` from HIR data structures one-by-one.
Change in behaviour:
- the HIR visitor traverses all attributes at once instead of parent-by-parent;
- attribute arrays are sometimes duplicated: for statements and variant constructors;
- as a consequence, attributes are marked as used after unused-attribute lint emission to avoid duplicate lints.
~~Current bug: the lint level is not correctly applied in `std::backtrace_rs`, triggering an unused attribute warning on `#![no_std]`. I welcome suggestions.~~
This updates all places where match branches check on StatementKind or UseContext.
This doesn't properly implement them, but adds TODOs where they are, and also adds some best
guesses to what they should be in some cases.
I'm still not totally sure if this is the right way to implement the memcpy, but that portion
compiles correctly now. Now to fix the compile errors everywhere else :).
Implement NOOP_METHOD_CALL lint
Implements the beginnings of https://github.com/rust-lang/lang-team/issues/67 - a lint for detecting noop method calls (e.g, calling `<&T as Clone>::clone()` when `T: !Clone`).
This PR does not fully realize the vision and has a few limitations that need to be addressed either before merging or in subsequent PRs:
* [ ] No UFCS support
* [ ] The warning message is pretty plain
* [ ] Doesn't work for `ToOwned`
The implementation uses [`Instance::resolve`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/instance/struct.Instance.html#method.resolve) which is normally later in the compiler. It seems that there are some invariants that this function relies on that we try our best to respect. For instance, it expects substitutions to have happened, which haven't yet performed, but we check first for `needs_subst` to ensure we're dealing with a monomorphic type.
Thank you to ```@davidtwco,``` ```@Aaron1011,``` and ```@wesleywiser``` for helping me at various points through out this PR ❤️.
Set codegen thread names
Set names on threads spawned during codegen. Various debugging and profiling tools can take advantage of this to show a more useful identifier for threads.
For example, gdb will show thread names in `info threads`:
```
(gdb) info threads
Id Target Id Frame
1 Thread 0x7fffefa7ec40 (LWP 2905) "rustc" __pthread_clockjoin_ex (threadid=140737214134016, thread_return=0x0, clockid=<optimized out>, abstime=<optimized out>, block=<optimized out>)
at pthread_join_common.c:145
2 Thread 0x7fffefa7b700 (LWP 2957) "rustc" 0x00007ffff125eaa8 in llvm::X86_MC::initLLVMToSEHAndCVRegMapping(llvm::MCRegisterInfo*) ()
from /home/wesley/.rustup/toolchains/stage1/lib/librustc_driver-f866439e29074957.so
3 Thread 0x7fffeef0f700 (LWP 3116) "rustc" futex_wait_cancelable (private=0, expected=0, futex_word=0x7fffe8602ac8) at ../sysdeps/nptl/futex-internal.h:183
* 4 Thread 0x7fffeed0e700 (LWP 3123) "rustc" rustc_codegen_ssa:🔙:write::spawn_work (cgcx=..., work=...) at /home/wesley/code/rust/rust/compiler/rustc_codegen_ssa/src/back/write.rs:1573
6 Thread 0x7fffe113b700 (LWP 3150) "opt foof.7rcbfp" 0x00007ffff2940e62 in llvm::CallGraph::populateCallGraphNode(llvm::CallGraphNode*) ()
from /home/wesley/.rustup/toolchains/stage1/lib/librustc_driver-f866439e29074957.so
8 Thread 0x7fffe0d39700 (LWP 3158) "opt foof.7rcbfp" 0x00007fffefe8998e in malloc_consolidate (av=av@entry=0x7ffe2c000020) at malloc.c:4492
9 Thread 0x7fffe0f3a700 (LWP 3162) "opt foof.7rcbfp" 0x00007fffefef27c4 in __libc_open64 (file=0x7fffe0f38608 "foof.foof.7rcbfp3g-cgu.6.rcgu.o", oflag=524865) at ../sysdeps/unix/sysv/linux/open64.c:48
(gdb)
```
and Windows Performance Analyzer will also show this information when profiling:
rustc_codegen_ssa: tune codegen according to available concurrency
This change tunes ahead-of-time codegening according to the amount of
concurrency available, rather than according to the number of CPUs on
the system. This can lower memory usage by reducing the number of
compiled LLVM modules in memory at once, particularly across several
rustc instances.
Previously, each rustc instance would assume that it should codegen
ahead of time to meet the demand of number-of-CPUs workers. But often, a
rustc instance doesn't have nearly that much concurrency available to
it, because the concurrency availability is split, via the jobserver,
across all active rustc instances spawned by the driving cargo process,
and is further limited by the `-j` flag argument. Therefore, each rustc
might have had several times the number of LLVM modules in memory than
it really needed to meet demand. If the modules were large, the effect
on memory usage would be noticeable.
With this change, the required amount of ahead-of-time codegen scales up
with the actual number of workers running within a rustc instance. Note
that the number of workers running can be less than the actual
concurrency available to a rustc instance. However, if more concurrency
is actually available, workers are spun up quickly as job tokens are
acquired, and the ahead-of-time codegen scales up quickly as well.
