The compiler will no longer insert a hash or version into a filename by default.
Instead, all output is simply based off the crate name being compiled. For
example, a crate name of `foo` would produce the following outputs:
* bin => foo
* rlib => libfoo.rlib
* dylib => libfoo.{so,dylib} or foo.dll
* staticlib => libfoo.a
The old behavior has been moved behind a new codegen flag,
`-C extra-filename=<hash>`. For example, with the "extra filename" of `bar` and
a crate name of `foo`, the following outputs would be generated:
* bin => foo (same old behavior)
* rlib => libfoobar.rlib
* dylib => libfoobar.{so,dylib} or foobar.dll
* staticlib => libfoobar.a
The makefiles have been altered to pass a hash by default to invocations of
`rustc` so all installed rust libraries will have a hash in their filename. This
is done because the standard libraries are intended to be installed into
privileged directories such as /usr/local. Additionally, it involves very few
build system changes!
RFC: 0035-remove-crate-id
[breaking-change]
The goal of the snapshot bots is to produce binaries which can run in as many
locations as possible. Currently we build on Centos 6 for this reason, but with
LLVM's update to C++11, this reduces the number of platforms that we could
possibly run on.
This adds a --enable-llvm-static-stdcpp option to the ./configure script for
Rust which will enable building a librustc with a static dependence on
libstdc++. This normally isn't necessary, but this option can be used on the
snapshot builders in order to continue to make binaries which should be able to
run in as many locations as possible.
Before this patch, if you wanted to add a crate to the build system you had to
change about 100 lines across 8 separate makefiles. This is highly error prone
and opaque to all but a few. This refactoring is targeted at consolidating this
effort so adding a new crate adds one line in one file in a way that everyone
can understand it.
If we bootstrap a cross compile from a stage1 compiler, then the stage1 compiler
already knows about the rustc => rustlib change, so we need to not add the extra
flag if it's a stage0 version of a target from a stage1 of another target.
All the copying of files amongst one another was apparently causing something to
get corrupted. Instead of having files fly around, just update the directories
to link to.
Note that this removes a number of run-pass tests which are exercising behavior
of the old runtime. This functionality no longer exists and is thoroughly tested
inside of libgreen and libnative. There isn't really the notion of "starting the
runtime" any more. The major notion now is "bootstrapping the initial task".
Right now multiple targets/hosts is broken because the libdir passed for all of
the LLVM libraries is for the wrong architecture. By using the right arch
(target, not host), everything is linked and assembled just fine.
In order to keep up to date with changes to the libraries that `llvm-config`
spits out, the dependencies to the LLVM are a dynamically generated rust file.
This file is now automatically updated whenever LLVM is updated to get kept
up-to-date.
At the same time, this cleans out some old cruft which isn't necessary in the
makefiles in terms of dependencies.
Closes#10745Closes#10744
This commit implements the support necessary for generating both intermediate
and result static rust libraries. This is an implementation of my thoughts in
https://mail.mozilla.org/pipermail/rust-dev/2013-November/006686.html.
When compiling a library, we still retain the "lib" option, although now there
are "rlib", "staticlib", and "dylib" as options for crate_type (and these are
stackable). The idea of "lib" is to generate the "compiler default" instead of
having too choose (although all are interchangeable). For now I have left the
"complier default" to be a dynamic library for size reasons.
Of the rust libraries, lib{std,extra,rustuv} will bootstrap with an
rlib/dylib pair, but lib{rustc,syntax,rustdoc,rustpkg} will only be built as a
dynamic object. I chose this for size reasons, but also because you're probably
not going to be embedding the rustc compiler anywhere any time soon.
Other than the options outlined above, there are a few defaults/preferences that
are now opinionated in the compiler:
* If both a .dylib and .rlib are found for a rust library, the compiler will
prefer the .rlib variant. This is overridable via the -Z prefer-dynamic option
* If generating a "lib", the compiler will generate a dynamic library. This is
overridable by explicitly saying what flavor you'd like (rlib, staticlib,
dylib).
* If no options are passed to the command line, and no crate_type is found in
the destination crate, then an executable is generated
With this change, you can successfully build a rust program with 0 dynamic
dependencies on rust libraries. There is still a dynamic dependency on
librustrt, but I plan on removing that in a subsequent commit.
This change includes no tests just yet. Our current testing
infrastructure/harnesses aren't very amenable to doing flavorful things with
linking, so I'm planning on adding a new mode of testing which I believe belongs
as a separate commit.
Closes#552
Similarly to the previous commit, libuv is only used by this library, so there's
no need for it to be linked into librustrt and available to all crates by
default.
There are a few reasons that this is a desirable move to take:
1. Proof of concept that a third party event loop is possible
2. Clear separation of responsibility between rt::io and the uv-backend
3. Enforce in the future that the event loop is "pluggable" and replacable
Here's a quick summary of the points of this pull request which make this
possible:
* Two new lang items were introduced: event_loop, and event_loop_factory.
The idea of a "factory" is to define a function which can be called with no
arguments and will return the new event loop as a trait object. This factory
is emitted to the crate map when building an executable. The factory doesn't
have to exist, and when it doesn't then an empty slot is in the crate map and
a basic event loop with no I/O support is provided to the runtime.
* When building an executable, then the rustuv crate will be linked by default
(providing a default implementation of the event loop) via a similar method to
injecting a dependency on libstd. This is currently the only location where
the rustuv crate is ever linked.
* There is a new #[no_uv] attribute (implied by #[no_std]) which denies
implicitly linking to rustuv by default
Closes#5019
r? anyone
Fix#8057
This commit fixes some oversights in the Makefile where rustc could be
invoked without some of its dependencies yet in place. (I encountered
the problem in practice; its not just theoretical.)
As written in Makefile.in, $(STAGE$(1)_T_$(2)_H_$(3)) is the way one
writes an invocation of rustc where $(1) is the stage number $(2) is
the target triple $(3) is the host triple. (Other uses of the macro
may plug in actual values or different parameters in for those three
formal parameters.)
When you have invocations of $(STAGE...), you need to make sure that
its dependences are satisfied; otherwise, if someone is using `make
-jN` for certain (large-ish) `N`, one can encounter situations where
GNU make attempts to invoke `rustc` before it has actually copied some
of its libraries into place, such as libmorestack.a, which causes a
link failure when the rustc invocation attempts to link in those
libraries.
In this case, the main prerequisite to add is TSREQ$(1)_T_$(2)_H_$(3),
which is described in Makefile.in as "Prerequisites for using the
stageN compiler to build target artifacts"
----
In addition to adding the extra dependences on TSREQ..., I also
replaced occurrences of the pattern:
TSREQ$(1)_T_$(2)_H_$(3)
$$(TLIB$(1)_T_$(2)_H_$(3))/$(CFG_STDLIB_$(2))
$$(TLIB$(1)_T_$(2)_H_$(3))/$(CFG_EXTRALIB_$(2))
with:
SREQ$(1)_T_$(2)_H_$(3)
which is equivalent to the above, as defined in Makefile.in
----
Finally, for the cases where TSREQ was missing in tests.mk, I went
ahead and put in a dependence on SREQ rather than just TSREQ, since it
was not clear to me how one could expect to compile those cases
without stdlib and extralib.
(It could well be that I should have gone ahead and done the same in
other cases where I saw TSREQ was missing, and put SREQ in those
cases as well. But this seemed like a good measure for now, without
needing to tax my understanding of the overall makefile
infrastructure much further.)
This commit fixes some oversights in the Makefile where rustc could be
invoked without some of its dependencies yet in place. (I encountered
the problem in practice; its not just theoretical.)
As written in Makefile.in, $(STAGE$(1)_T_$(2)_H_$(3)) is the way one
writes an invocation of rustc where $(1) is the stage number $(2) is
the target triple $(3) is the host triple. (Other uses of the macro
may plug in actual values or different parameters in for those three
formal parameters.)
When you have invocations of $(STAGE...), you need to make sure that
its dependences are satisfied; otherwise, if someone is using `make
-jN` for certain (large-ish) `N`, one can encounter situations where
GNU make attempts to invoke `rustc` before it has actually copied some
of its libraries into place, such as libmorestack.a, which causes a
link failure when the rustc invocation attempts to link in those
libraries.
In this case, the main prerequisite to add is TSREQ$(1)_T_$(2)_H_$(3),
which is described in Makefile.in as "Prerequisites for using the
stageN compiler to build target artifacts"
----
In addition to adding the extra dependences on TSREQ..., I also
replaced occurrences of the pattern:
TSREQ$(1)_T_$(2)_H_$(3)
$$(TLIB$(1)_T_$(2)_H_$(3))/$(CFG_STDLIB_$(2))
$$(TLIB$(1)_T_$(2)_H_$(3))/$(CFG_EXTRALIB_$(2))
with:
SREQ$(1)_T_$(2)_H_$(3)
which is equivalent to the above, as defined in Makefile.in
----
Finally, for the cases where TSREQ was missing in tests.mk, I went
ahead and put in a dependence on SREQ rather than just TSREQ, since it
was not clear to me how one could expect to compile those cases
without stdlib and extralib.
(It could well be that I should have gone ahead and done the same in
other cases where I saw TSREQ was missing, and put SREQ in those
cases as well. But this seemed like a good measure for now, without
needing to tax my understanding of the overall makefile
infrastructure much further.)
Namely, switched in many places to using GNU make provided functions
for directory listing and text processing, rather than spawning a
shell process to do that work.
In the process of the revision, learned about Target-specific
variables, which were very applicable to INSTALL_LIB (which, on a
per-recipe basis, was always receiving the same actual arguments for
its first two formal parameters in every invocation).
http://www.gnu.org/software/make/manual/html_node/Target_002dspecific.html
(We might be able to make use of those in future refactorings.)
----
Also adds a cleanup pass to get-snapshot.py as well, since the same
problem arises when we unpack libraries from the snapshot archive into
a build directory with a prior snapshot's artifacts. (I put this step
into the python script rather than the makefile because I wanted to
delay the cleanup pass until after we have at least successfully
downloaded the tarball. That way, if the download fails, you should
not destroy the previous unarchived snapshot libraries and build
products.)
----
Also reverted whitespace changes to minimize diff.
I plan to put them back in in a dedicated commit elsewhere.
When building Rust libraries (e.g. librustc, libstd, etc), checks for
and verbosely removes previous build products before invoking rustc.
(Also, when Make variable VERBOSE is defined, it will list all of the
libraries matching the object library's glob after the rustc
invocation has completed.)
When installing Rust libraries, checks for previous libraries in
target install directory, but does not remove them.
The thinking behind these two different modes of operation is that the
installation target, unlike the build tree, is not under the control
of this infrastructure and it is not up to this Makefile to decide if
the previous libraries should be removed.
This way a cross-compiled rustc's answer to host_triple() is correct. The return
value of host_triple() reflects the actual host triple that the compiler was
build for, not the triple the compiler is being built on
This lets us use #ifdefs to determine which stage of the build we happen
to be in, which is useful in the event we need to make changes to rustrt
that are incompatible with the code generated by stage0.
This should help pave the way to completing #6575, which will likely
require changes to type signatures for spawn_fn & glue_fn in rustrt.
This is an attempt to address Issue #3326 by adding [*order-only*][1]
prerequsites of each build product on the directory where it is to go.
It is important that the prerequisites be order-only, since the
timestamp on a parent directory is not relevant to whether a product
is out of date; the parent directory merely needs to exist.
(This use case of generating target directories was provided as an
[example][2] of how order-only prequisites are used.)
[1]: http://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html
[2]: http://www.kolpackov.net/pipermail/notes/2004-January/000001.html
