This is a direct port of my prior work on the float formatting. The detailed description is available [here](https://github.com/lifthrasiir/rust-strconv#flt2dec). In brief,
* This adds a new hidden module `core::num::flt2dec` for testing from `libcoretest`. Why is it in `core::num` instead of `core::fmt`? Because I envision that the table used by `flt2dec` is directly applicable to `dec2flt` (cf. #24557) as well, which exceeds the realm of "formatting".
* This contains both Dragon4 algorithm (exact, complete but slow) and Grisu3 algorithm (exact, fast but incomplete).
* The code is accompanied with a large amount of self-tests and some exhaustive tests. In particular, `libcoretest` gets a new dependency on `librand`. For the external interface it relies on the existing test suite.
* It is known that, in the best case, the entire formatting code has about 30 KBs of binary overhead (judged from strconv experiments). Not too bad but there might be a potential room for improvements.
This is rather large code. I did my best to comment and annotate the code, but you have been warned.
For the maximal availability the original code was licensed in CC0, but I've also dual-licensed it in MIT/Apache as well so there should be no licensing concern.
This is [breaking-change] as it changes the float output slightly (and it also affects the casing of `inf` and `nan`). I hope this is not a big deal though :)
Fixes#7030, #18038 and #24556. Also related to #6220 and #20870.
## Known Issues
- [x] I've yet to finish `make check-stage1`. It does pass main test suites including `run-pass` but there might be some unknown edges on the doctests.
- [ ] Figure out how this PR affects rustc.
- [ ] Determine which internal routine is mapped to the formatting specifier. Depending on the decision, some internal routine can be safely removed (for instance, currently `to_shortest_str` is unused).
For the shortest mode the IEEE 754 decoder already provides
an exact rounding range accounting for banker's rounding,
but it was not the case for the exact mode. This commit alters
the exact mode algorithm for Dragon so that any number ending at
`...x5000...` with even `x` and infinite zeroes will round to
`...x` instead of `...(x+1)` as it was. Grisu is not affected
by this change because this halfway case always results in
the failure for Grisu.
The bug involves the incorrect logic for `core::num::flt2dec::decoder`.
This makes some numbers in the form of 2^n missing one final digits,
which breaks the bijectivity criterion. The regression tests have been
added, and f32 exhaustive test is rerun to get the updated result.
This is a fork of the flt2dec portion of rust-strconv [1] with
a necessary relicensing (the original code was licensed CC0-1.0).
Each module is accompanied with large unit tests, integrated
in this commit as coretest::num::flt2dec. This module is added
in order to replace the existing core::fmt::float method.
The forked revision of rust-strconv is from 2015-04-20, with a commit ID
9adf6d3571c6764a6f240a740c823024f70dc1c7.
[1] https://github.com/lifthrasiir/rust-strconv/
Specifically, make count, nth, and last call the corresponding methods
on the underlying iterator where possible. This way, if the underlying
iterator has an optimized count, nth, or last implementations (e.g.
slice::Iter), these methods will propagate these optimizations.
Additionally, change Skip::next to take advantage of a potentially
optimized nth method on the underlying iterator.
These implementations were intended to be unstable, but currently the stability
attributes cannot handle a stable trait with an unstable `impl` block. This
commit also audits the rest of the standard library for explicitly-`#[unstable]`
impl blocks. No others were removed but some annotations were changed to
`#[stable]` as they're defacto stable anyway.
One particularly interesting `impl` marked `#[stable]` as part of this commit
is the `Add<&[T]>` impl for `Vec<T>`, which uses `push_all` and implicitly
clones all elements of the vector provided.
Closes#24791
[breaking-change]
These implementations were intended to be unstable, but currently the stability
attributes cannot handle a stable trait with an unstable `impl` block. This
commit also audits the rest of the standard library for explicitly-`#[unstable]`
impl blocks. No others were removed but some annotations were changed to
`#[stable]` as they're defacto stable anyway.
One particularly interesting `impl` marked `#[stable]` as part of this commit
is the `Add<&[T]>` impl for `Vec<T>`, which uses `push_all` and implicitly
clones all elements of the vector provided.
Closes#24791
core: Fix size_hint for signed integer `Range<T>` iterators
There was an overflow bug in .size_hint() for signed iterators, which
produced an hilariously incorrect size or an overflow panic.
Incorrect size is a serious bug since the iterators are marked
ExactSizeIterator. (And leads to abort() on (-1i8..127).collect() when
the collection tries to preallocate too much).
> (-1i8..127).size_hint()
(18446744073709551488, Some(18446744073709551488))
Bug found using quickcheck.
Fixes#24851
Instead of using the O(n) defaults, define O(1) shortcuts. I also copied (and slightly modified) the relevant tests from the iter tests into the slice tests just in case someone comes along and changes them in the future.
Partially implements #24214.
There was an overflow bug in .size_hint() for signed iterators, which
produced an hilariously incorrect size or an overflow panic.
Incorrect size is a serious bug since the iterators are marked
ExactSizeIterator. (And leads to abort() on (-1i8..127).collect() when
the collection tries to preallocate too much).
All signed range iterators were affected.
> (-1i8..127).size_hint()
(18446744073709551488, Some(18446744073709551488))
Bug found using quickcheck.
Fixes#24851
Changes the style guidelines regarding unit tests to recommend using a
sub-module named "tests" instead of "test" for unit tests as "test"
might clash with imports of libtest.
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
The main change in this patch is removing the use of `Option` inside the
inner loops of those functions to avoid comparisons where one branch
will only trigger on the first pass through the loop.
The included benchmarks go from:
test bench_max ... bench: 372 ns/iter (+/- 118)
test bench_max_by ... bench: 428 ns/iter (+/- 33)
test bench_max_by2 ... bench: 7128 ns/iter (+/- 326)
to:
test bench_max ... bench: 317 ns/iter (+/- 64)
test bench_max_by ... bench: 356 ns/iter (+/- 270)
test bench_max_by2 ... bench: 1387 ns/iter (+/- 183)
Problem noticed in http://www.reddit.com/r/rust/comments/31syce/using_iterators_to_find_the_index_of_the_min_or/
The main change in this patch is removing the use of `Option` inside the
inner loops of those functions to avoid comparisons where one branch
will only trigger on the first pass through the loop.
The included benchmarks go from:
test bench_max ... bench: 372 ns/iter (+/- 118)
test bench_max_by ... bench: 428 ns/iter (+/- 33)
test bench_max_by2 ... bench: 7128 ns/iter (+/- 326)
to:
test bench_max ... bench: 317 ns/iter (+/- 64)
test bench_max_by ... bench: 356 ns/iter (+/- 270)
test bench_max_by2 ... bench: 1387 ns/iter (+/- 183)
Problem noticed in http://www.reddit.com/r/rust/comments/31syce/using_iterators_to_find_the_index_of_the_min_or/
In addition to being nicer, this also allows you to use `sum` and `product` for
iterators yielding custom types aside from the standard integers.
Due to removing the `AdditiveIterator` and `MultiplicativeIterator` trait, this
is a breaking change.
[breaking-change]
This adds the missing methods and turns `str::pattern` in a user facing module, as per RFC.
This also contains some big internal refactorings:
- string iterator pairs are implemented with a central macro to reduce redundancy
- Moved all tests from `coretest::str` into `collectionstest::str` and left a note to prevent the two sets of tests drifting apart further.
See https://github.com/rust-lang/rust/issues/22477
These constants are small and can fit even in `u8`, but semantically they have type `usize` because they denote sizes and are almost always used in `usize` context. The change of their type to `u32` during the integer audit led only to the large amount of `as usize` noise (see the second commit, which removes this noise).
This is a minor [breaking-change] to an unstable interface.
r? @aturon
This commit is an implementation of [RFC 979][rfc] which changes the meaning of
the count parameter to the `splitn` function on strings and slices. The
parameter now means the number of items that are returned from the iterator, not
the number of splits that are made.
[rfc]: https://github.com/rust-lang/rfcs/pull/979Closes#23911
[breaking-change]
const_eval : add overflow-checking for {`+`, `-`, `*`, `/`, `<<`, `>>`}.
One tricky detail here: There is some duplication of labor between `rustc::middle::const_eval` and `rustc_trans::trans::consts`. It might be good to explore ways to try to factor out the common structure to the two passes (by abstracting over the particular value-representation used in the compile-time interpreter).
----
Update: Rebased atop #23841Fix#22531Fix#23030Fix#23221Fix#23235
This is a deprecated attribute that is slated for removal, and it also affects
all implementors of the trait. This commit removes the attribute and fixes up
implementors accordingly. The primary implementation which was lost was the
ability to compare `&[T]` and `Vec<T>` (in that order).
This change also modifies the `assert_eq!` macro to not consider both directions
of equality, only the one given in the left/right forms to the macro. This
modification is motivated due to the fact that `&[T] == Vec<T>` no longer
compiles, causing hundreds of errors in unit tests in the standard library (and
likely throughout the community as well).
Closes#19470
[breaking-change]
This commit cleans out a large amount of deprecated APIs from the standard
library and some of the facade crates as well, updating all users in the
compiler and in tests as it goes along.
This is a deprecated attribute that is slated for removal, and it also affects
all implementors of the trait. This commit removes the attribute and fixes up
implementors accordingly. The primary implementation which was lost was the
ability to compare `&[T]` and `Vec<T>` (in that order).
This change also modifies the `assert_eq!` macro to not consider both directions
of equality, only the one given in the left/right forms to the macro. This
modification is motivated due to the fact that `&[T] == Vec<T>` no longer
compiles, causing hundreds of errors in unit tests in the standard library (and
likely throughout the community as well).
cc #19470
[breaking-change]
This functions swaps the order of arguments to a few functions that previously
took (output, input) parameters, but now take (input, output) parameters (in
that order).
The affected functions are:
* ptr::copy
* ptr::copy_nonoverlapping
* slice::bytes::copy_memory
* intrinsics::copy
* intrinsics::copy_nonoverlapping
Closes#22890
[breaking-change]
