All deprecation warnings have been converted to errors. This includes
the warning for multiple cfgs on one item. We'll leave that as an error
for some period of time to ensure that all uses are updated before the
behavior changes from "or" to "and".
All deprecation warnings have been converted to errors. This includes
the warning for multiple cfgs on one item. We'll leave that as an error
for some period of time to ensure that all uses are updated before the
behavior changes from "or" to "and".
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
Closes#17718
[rfc]: https://github.com/rust-lang/rfcs/pull/246
Instead of returning &'static [u8], an invocation of `bytes!()` now returns
`&'static [u8, ..N]` where `N` is the length of the byte vector. This should
functionally be the same, but there are some cases where an explicit cast may be
needed, so this is a:
[breaking-change]
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
[rfc]: https://github.com/rust-lang/rfcs/pull/246
For example, this matcher: `fn $name:ident( $($param:ident : $pty:ty),* )` would fail when parsing `fn foo()`, because macro parser wouldn't realize that an ident cannot start with `)`.
This resolves#5902, and at least partially mitigates #9364 and #3232.
This rewrites them to the current `ItemStatic` production of the compiler, but I
want to get this into a snapshot. It will be illegal to use a `static` in a
pattern of a `match` statement, so all those current uses will need to be
rewritten to `const` once it's implemented. This requires that the stage0
snapshot is able to parse `const`.
cc #17718
prefer `Deref` over `DerefMut` in all other circumstances.
Because the compiler now prefers `Deref`, this can break code that
looked like:
let mut foo = bar.borrow_mut();
(*foo).call_something_that_requires_mutable_self();
Replace this code with:
let mut foo = bar.baz();
(&mut *foo).call_something_that_requires_mutable_self();
Closes#12825.
[breaking-change]
r? @nikomatsakis
Modify ast::ExprMatch to include a new value of type ast::MatchSource,
making it easy to tell whether the match was written literally or
produced via desugaring. This allows us to customize error messages
appropriately.
This makes it easier to experiment with improved quasiquoting as an ordinary
plugin library.
The list of quote macros in feature_gate.rs was already out of sync;
this commit also prevents that problem in the future.
in favor of `move`.
This breaks code that used `move` as an identifier, because it is now a
keyword. Change such identifiers to not use the keyword `move`.
Additionally, this breaks code that was counting on by-value or
by-reference capture semantics for unboxed closures (behind the feature
gate). Change `ref |:|` to `|:|` and `|:|` to `move |:|`.
Part of RFC #63; part of issue #12831.
[breaking-change]
Deprecates the `find_or_*` family of "internal mutation" methods on `HashMap` in
favour of the "external mutation" Entry API as part of RFC 60. Part of #17320,
but this still needs to be done on the rest of the maps. However they don't have
any internal mutation methods defined, so they can be done without deprecating
or breaking anything. Work on `BTree` is part of the complete rewrite in #17334.
The implemented API deviates from the API described in the RFC in two key places:
* `VacantEntry.set` yields a mutable reference to the inserted element to avoid code
duplication where complex logic needs to be done *regardless* of whether the entry
was vacant or not.
* `OccupiedEntry.into_mut` was added so that it is possible to return a reference
into the map beyond the lifetime of the Entry itself, providing functional parity
to `VacantEntry.set`.
This allows the full find_or_insert functionality to be implemented using this API.
A PR will be submitted to the RFC to amend this.
[breaking-change]
This extends cfg-gating to attributes.
```rust
#[cfg_attr(<cfg pattern>, <attr>)]
```
will expand to
```rust
#[<attr>]
```
if the `<cfg pattern>` matches the current cfg environment, and nothing
if it does not. The grammar for the cfg pattern has a simple
recursive structure:
* `value` and `key = "value"` are cfg patterns,
* `not(<cfg pattern>)` is a cfg pattern and matches if `<cfg pattern>`
does not.
* `all(<cfg pattern>, ...)` is a cfg pattern and matches if all of the
`<cfg pattern>`s do.
* `any(<cfg pattern>, ...)` is a cfg pattern and matches if any of the
`<cfg pattern>`s do.
Examples:
```rust
// only derive Show for assert_eq! in tests
#[cfg_attr(test, deriving(Show))]
struct Foo { ... }
// only derive Show for assert_eq! in tests and debug builds
#[cfg_attr(any(test, not(ndebug)), deriving(Show))]
struct Foo { ... }
// ignore a test in certain cases
#[test]
#[cfg_attr(all(not(target_os = "linux"), target_endian = "big"), ignore)]
fn test_broken_thing() { ... }
// Avoid duplication when fixing staging issues in rustc
#[cfg_attr(not(stage0), lang="iter")]
pub trait Iterator<T> { ... }
```
Because I'm still 😷😷😷 , I figured some mindless tasks would be better than trying to finish the ownership guide.
The manual has long been waiting for some ❤️❤️❤️ , and so I gave it a quick once-over. I made small commits in case any of the changes are a bit weird, I mostly did a few things:
1. changed 'manual' to 'reference.' I feel like this name is better. If it's not, It's not a huge deal. it shouldn't be `rust.md` though.
2. word wrapped everything appropriately. Changes 1&2 are in the first commit, so that its' easier to see the changes in the later ones.
3. fixed other small style issues
4. removed references to things that are in the standard library, and not the language itself
There's still lots of gross in here, but I didn't want to pile on too too many changes.
/cc @brson @nikomatsakis
This breaks code like:
struct Foo {
...
}
pub fn make_foo() -> Foo {
...
}
Change this code to:
pub struct Foo { // note `pub`
...
}
pub fn make_foo() -> Foo {
...
}
The `visible_private_types` lint has been removed, since it is now an
error to attempt to expose a private type in a public API. In its place
a `#[feature(visible_private_types)]` gate has been added.
Closes#16463.
RFC #48.
[breaking-change]
Change to resolve and update compiler and libs for uses.
[breaking-change]
Enum variants are now in both the value and type namespaces. This means that
if you have a variant with the same name as a type in scope in a module, you
will get a name clash and thus an error. The solution is to either rename the
type or the variant.
Part of issue #16640. I am leaving this issue open to handle parsing of
higher-rank lifetimes in traits.
This change breaks code that used unboxed closures:
* Instead of `F:|&: int| -> int`, write `F:Fn(int) -> int`.
* Instead of `F:|&mut: int| -> int`, write `F:FnMut(int) -> int`.
* Instead of `F:|: int| -> int`, write `F:FnOnce(int) -> int`.
[breaking-change]
This breaks code that looked like:
mymacro!(static::foo);
... where `mymacro!` expects a path or expression. Change such macros to
not accept keywords followed by `::`.
Closes#17298.
[breaking-change]
The implementation essentially desugars during type collection and AST
type conversion time into the parameter scheme we have now. Only fully
qualified names--e.g. `<T as Foo>::Bar`--are supported.
This prevents confusing errors when accidentally using an assignment
in an `if` expression. For example:
```rust
fn main() {
let x = 1u;
if x = x {
println!("{}", x);
}
}
```
Previously, this yielded:
```
test.rs:4:16: 4:17 error: expected `:`, found `!`
test.rs:4 println!("{}", x);
^
```
With this change, it now yields:
```
test.rs:3:8: 3:13 error: mismatched types: expected `bool`, found `()` (expected bool, found ())
test.rs:3 if x = x {
^~~~~
```
Closes issue #17283
The `StrInterner::clear()` method takes self immutably but can invalidate references returned by `StrInterner::get_ref`. Since `get_ref` is unused, just remove it.
Closes#17181
Sized deallocation makes it pointless to provide an address that never
overlaps with pointers returned by an allocator. Code can branch on the
capacity of the allocation instead of a comparison with this sentinel.
This improves the situation in #8859, and the remaining issues are only
from the logging API, which should be disabled by default in optimized
release builds anyway along with debug assertions. The remaining issues
are part of #17081.
Closes#8859
This adds ‘help’ diagnostic messages to rustc. This is used for anything that
provides help to the user, particularly the `--explain` messages that were
previously integrated into the relevant error message.
type they provide an implementation for.
This breaks code like:
mod foo {
struct Foo { ... }
}
impl foo::Foo {
...
}
Change this code to:
mod foo {
struct Foo { ... }
impl Foo {
...
}
}
Additionally, if you used the I/O path extension methods `stat`,
`lstat`, `exists`, `is_file`, or `is_dir`, note that these methods have
been moved to the the `std::io::fs::PathExtensions` trait. This breaks
code like:
fn is_it_there() -> bool {
Path::new("/foo/bar/baz").exists()
}
Change this code to:
use std::io::fs::PathExtensions;
fn is_it_there() -> bool {
Path::new("/foo/bar/baz").exists()
}
Closes#17059.
RFC #155.
[breaking-change]
The other extension types already worked this way and it can be useful to track some state along with the extension.
I also removed the `BasicMacroExpander` and `BasicIdentMacroExpander` since the span inside of them was never used. The expander function types now directly implement the relevant trait.
The string slices returned by `get_ref` can actually be
invalidated by calling `clear`. Since this method is unused,
it is easiest to simply remove it.
Closes#17181
This PR creates a new lint : ``unused_extern_crate``, which do pretty much the same thing as ``unused_import``, but for ``extern crate`` statements. It is related to feature request #10385.
I adapted the code tracking used imports so that it tracks extern crates usage as well. This was mainly trial and error and while I believe all cases are covered, there might be some code I added that is useless (long compile times didn't give me the opportunity to check this in detail).
Also, I removed some unused ``extern crate`` statements from the libs, that where spotted by this new lint.
The spans inside of these types were always None and never used. Pass
the expander function directly instead of wrapping it in one of these
types.
[breaking-change]
This allows code to access the fields of tuples and tuple structs behind the feature gate `tuple_indexing`:
```rust
#![feature(tuple_indexing)]
let x = (1i, 2i);
assert_eq!(x.1, 2);
struct Point(int, int);
let origin = Point(0, 0);
assert_eq!(origin.0, 0);
assert_eq!(origin.1, 0);
```
Implements [RFC 53](https://github.com/rust-lang/rfcs/blob/master/active/0053-tuple-accessors.md). Closes#16950.
For convenience, the traits are implemented for the respective bare
functions. Change code from this:
```rust
ItemDecorator(some_function)
// or
ItemModifier(some_other_function)
```
to
```rust
ItemDecorator(box some_function)
// or
ItemModifier(box some_other_function)
```
[breaking-change]
Based on an observation that strings and arguments are always interleaved, thanks to #15832. Additionally optimize invocations where formatting parameters are unspecified for all arguments, e.g. `"{} {:?} {:x}"`, by emptying the `__STATIC_FMTARGS` array. Next, `Arguments::new` replaces an empty slice with `None` so that passing empty `__STATIC_FMTARGS` generates slightly less machine code when `Arguments::new` is inlined. Furthermore, formatting itself treats these cases separately without making redundant copies of formatting parameters.
All in all, this adds a single mov instruction per `write!` in most cases. That's why code size has increased.
This allows code to access the fields of tuples and tuple structs:
let x = (1i, 2i);
assert_eq!(x.1, 2);
struct Point(int, int);
let origin = Point(0, 0);
assert_eq!(origin.0, 0);
assert_eq!(origin.1, 0);
Format specs are ignored and not stored in case they're all default.
Restore default formatting parameters during iteration.
Pass `None` instead of empty slices of format specs to take advantage
of non-nullable pointer optimization.
Generate a call to one of two functions of `fmt::Argument`.
instead of prefix `..`.
This breaks code that looked like:
match foo {
[ first, ..middle, last ] => { ... }
}
Change this code to:
match foo {
[ first, middle.., last ] => { ... }
}
RFC #55.
Closes#16967.
[breaking-change]
Adjust the handling of `#[inline]` items so that they get translated into every
compilation unit that uses them. This is necessary to preserve the semantics
of `#[inline(always)]`.
Crate-local `#[inline]` functions and statics are blindly translated into every
compilation unit. Cross-crate inlined items and monomorphizations of
`#[inline]` functions are translated the first time a reference is seen in each
compilation unit. When using multiple compilation units, inlined items are
given `available_externally` linkage whenever possible to avoid duplicating
object code.
Use '^' to specify center alignment in format strings.
fmt!( "[{:^5s}]", "Hi" ) -> "[ Hi ]"
fmt!( "[{:^5s}]", "H" ) -> "[ H ]"
fmt!( "[{:^5d}]", 1i ) -> "[ 1 ]"
fmt!( "[{:^5d}]", -1i ) -> "[ -1 ]"
fmt!( "[{:^6d}]", 1i ) -> "[ 1 ]"
fmt!( "[{:^6d}]", -1i ) -> "[ -1 ]"
If the padding is odd then the padding on the right will be one
character longer than the padding on the left.
Tuples squashed
They were only correct in the simplest case. Some of the optimisations
are certainly possible but should be introduced carefully and only
when the whole pattern codegen infrastructure is in a better shape.
Fixes#16648.
Enables any macros using `MacExpr` to be treated as patterns when
they produce a literal in the form `ExprLit` (e.g. `stringify!` or `line!`).
Fixes#16876.
They were only correct in the simplest case. Some of the optimisations
are certainly possible but should be introduced carefully and only
when the whole pattern codegen infrastructure is in a better shape.
Fixes#16648.
Different Identifiers and Names can have identical textual representations, but different internal representations, due to the macro hygiene machinery (syntax contexts and gensyms). This provides a way to see these internals by compiling with `--pretty expanded,hygiene`.
This is useful for debugging & hacking on macros (e.g. diagnosing https://github.com/rust-lang/rust/issues/15750/https://github.com/rust-lang/rust/issues/15962 likely would've been faster with this functionality).
E.g.
```rust
#![feature(macro_rules)]
// minimal junk
#![no_std]
macro_rules! foo {
($x: ident) => { y + $x }
}
fn bar() {
foo!(x)
}
```
```rust
#![feature(macro_rules)]
// minimal junk
#![no_std]
fn bar /* 61#0 */() { y /* 60#2 */ + x /* 58#3 */ }
```
`--pretty expanded,hygiene` is helpful with debugging macro issues,
since two identifiers/names can be textually the same, but different
internally (resulting in weird "undefined variable" errors).
This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
For review. Not sure about the link_attrs stuff. Will work on converting all the tests.
extern crate "foobar" as foo;
extern crate foobar as foo;
Implements remaining part of RFC #47.
Addresses issue #16461.
Removed link_attrs from rust.md, they don't appear to be supported by
the parser.
[breaking-change]
1. The internal layout for traits has changed from (vtable, data) to (data, vtable). If you were relying on this in unsafe transmutes, you might get some very weird and apparently unrelated errors. You should not be doing this! Prefer not to do this at all, but if you must, you should use raw::TraitObject rather than hardcoding rustc's internal representation into your code.
2. The minimal type of reference-to-vec-literals (e.g., `&[1, 2, 3]`) is now a fixed size vec (e.g., `&[int, ..3]`) where it used to be an unsized vec (e.g., `&[int]`). If you want the unszied type, you must explicitly give the type (e.g., `let x: &[_] = &[1, 2, 3]`). Note in particular where multiple blocks must have the same type (e.g., if and else clauses, vec elements), the compiler will not coerce to the unsized type without a hint. E.g., `[&[1], &[1, 2]]` used to be a valid expression of type '[&[int]]'. It no longer type checks since the first element now has type `&[int, ..1]` and the second has type &[int, ..2]` which are incompatible.
3. The type of blocks (including functions) must be coercible to the expected type (used to be a subtype). Mostly this makes things more flexible and not less (in particular, in the case of coercing function bodies to the return type). However, in some rare cases, this is less flexible. TBH, I'm not exactly sure of the exact effects. I think the change causes us to resolve inferred type variables slightly earlier which might make us slightly more restrictive. Possibly it only affects blocks with unreachable code. E.g., `if ... { fail!(); "Hello" }` used to type check, it no longer does. The fix is to add a semicolon after the string.
Implements remaining part of RFC #47.
Addresses issue #16461.
Removed link_attrs from rust.md, they don't appear to be supported by
the parser.
Changed all the tests to use the new extern crate syntax
Change pretty printer to use 'as' syntax
As of RFC 18, struct layout is undefined. Opting into a C-compatible struct
layout is now down with #[repr(C)]. For consistency, specifying a packed
layout is now also down with #[repr(packed)]. Both can be specified.
To fix errors caused by this, just add #[repr(C)] to the structs, and change
#[packed] to #[repr(packed)]
Closes#14309
[breaking-change]
Stop read+write expressions from expanding into two occurences
in the AST. Add a bool to indicate whether an operand in output
position if read+write or not.
Fixes#14936
declared with the same name in the same scope.
This breaks several common patterns. First are unused imports:
use foo::bar;
use baz::bar;
Change this code to the following:
use baz::bar;
Second, this patch breaks globs that import names that are shadowed by
subsequent imports. For example:
use foo::*; // including `bar`
use baz::bar;
Change this code to remove the glob:
use foo::{boo, quux};
use baz::bar;
Or qualify all uses of `bar`:
use foo::{boo, quux};
use baz;
... baz::bar ...
Finally, this patch breaks code that, at top level, explicitly imports
`std` and doesn't disable the prelude.
extern crate std;
Because the prelude imports `std` implicitly, there is no need to
explicitly import it; just remove such directives.
The old behavior can be opted into via the `import_shadowing` feature
gate. Use of this feature gate is discouraged.
This implements RFC #116.
Closes#16464.
[breaking-change]
These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
r? @nikomatsakis (or whoever)
These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
methods.
This paves the way to associated items by introducing an extra level of
abstraction ("impl-or-trait item") between traits/implementations and
methods. This new abstraction is encoded in the metadata and used
throughout the compiler where appropriate.
There are no functional changes; this is purely a refactoring.
This patch primarily does two things: (1) it prevents lifetimes from
leaking out of unboxed closures; (2) it allows unboxed closure type
notation, call notation, and construction notation to construct closures
matching any of the three traits.
This breaks code that looked like:
let mut f;
{
let x = &5i;
f = |&mut:| *x + 10;
}
Change this code to avoid having a reference escape. For example:
{
let x = &5i;
let mut f; // <-- move here to avoid dangling reference
f = |&mut:| *x + 10;
}
I believe this is enough to consider unboxed closures essentially
implemented. Further issues (for example, higher-rank lifetimes) should
be filed as followups.
Closes#14449.
[breaking-change]
r? @pnkfelix
This patch primarily does two things: (1) it prevents lifetimes from
leaking out of unboxed closures; (2) it allows unboxed closure type
notation, call notation, and construction notation to construct closures
matching any of the three traits.
This breaks code that looked like:
let mut f;
{
let x = &5i;
f = |&mut:| *x + 10;
}
Change this code to avoid having a reference escape. For example:
{
let x = &5i;
let mut f; // <-- move here to avoid dangling reference
f = |&mut:| *x + 10;
}
I believe this is enough to consider unboxed closures essentially
implemented. Further issues (for example, higher-rank lifetimes) should
be filed as followups.
Closes#14449.
[breaking-change]
by-reference upvars.
This partially implements RFC 38. A snapshot will be needed to turn this
on, because stage0 cannot yet parse the keyword.
Part of #12831.
r? @alexcrichton
by-reference upvars.
This partially implements RFC 38. A snapshot will be needed to turn this
on, because stage0 cannot yet parse the keyword.
Part of #12381.
This adds support to `quote_expr!` and friends for round-trip hygienic
preservation of Ident.
Here are the pieces of the puzzle:
* adding a method for encoding Ident for re-reading into token tree.
* Support for reading such encoded Idents in the lexer. Note that one
must peek ahead for MOD_SEP after scan_embedded_hygienic_ident.
* To ensure that encoded Idents are only read when we are in the midst
of expanding a `quote_expr` or similar, added a
`read_embedded_ident` flag on `StringReader`.
* pprust support for encoding Ident's as (uint,uint) pairs (for hygiene).
For historical reasons, "Win32" has been used in Rust codebase to mean "Windows OS in general".
This is confusing, especially now, that Rust supports Win64 builds.
[breaking-change]
This is useful e.g. for tools need a node-id, such as the flowgraph
pretty printer, since it can avoids the need to first pretty-print the
whole expanded,identified input in order to find out what the node-id
actually is.
It currently only supports path suffixes thst are made up of module
names (e.g. you cannot use the type instantiation form `a::<int>::b`
or `option::Option::unwrap_or` as a path suffix for this tool, though
the tool will produce paths that have non-modulues in the portion of
the path that is not included in the suffix).
(addressed review feedback too)
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
meaning `'b outlives 'a`. Syntax currently does nothing but is needed for full
fix to #5763. To use this syntax, the issue_5763_bootstrap feature guard is
required.
This ended up passing through the lexer but dying later on in parsing when it
wasn't handled. The strategy taken was to copy the `str_lit` funciton, but adapt
it for bytes.
Closes#16278
The `type_overflow` lint, doesn't catch the overflow for `i64` because
the overflow happens earlier in the parse phase when the `u64` as biggest
possible int gets casted to `i64` , without checking the for overflows.
We can't lint in the parse phase, so a refactoring of the `LitInt` type
was necessary.
The types `LitInt`, `LitUint` and `LitIntUnsuffixed` where merged to one
type `LitInt` which stores it's value as `u64`. An additional parameter was
added which indicate the signedness of the type and the sign of the value.
Note: This PR is motivated by an attempt to write an custom syntax extension that tried to use `syntax::fold`, and that could only do so by fixing bugs in it and copying out private functions.
---
Refactored `syntax::fold`
Prior to this, the code there had a few issues:
- Default implementations inconsistenly either had the prefix `noop_` or
not.
- Some default methods where implemented in terms of a public noop function
for user code to call, others where implemented directly on the trait
and did not allow users of the trait to reuse the code.
- Some of the default implementations where private, and thus not reusable
for other implementors.
- There where some bugs where default implemntations called other default
implementations directly, rather than to the underlying Folder, with the
result of some ast nodes never being visted even if the user implemented that
method. (For example, the current Folder never folded struct fields)
This commit solves this situation somewhat radically by making __all__
`fold_...` functions in the module into Folder methods, and implementing
them all in terms of public `noop_...` functions for other implementors to
call out to.
Some public functions had to be renamed to fit the new system, so this is a
breaking change.
---
Also added a few trait implementations to `ast` types
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
This adds support for `quote_arm!(cx, $pat => $expr)`, and `macro_rules!(($a:arm) => (...))`. It also fixes a bug in pretty printing, where this would generate invalid code:
```
match { 5i } {
1 => 2,
_ => 3,
}
```
It would generate this code:
```
match { 5i } {
1 => 2
_ => 3
}
```
Finally, it adds a couple helper methods to `ExtCtxt`.
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
Prior to this, the code there had a few issues:
- Default implementations inconsistently either had the prefix `noop_` or
not.
- Some default methods where implemented in terms of a public noop function
for user code to call, others where implemented directly on the trait
and did not allow users of the trait to reuse the code.
- Some of the default implementations where private, and thus not reusable
for other implementors.
- There where some bugs where default implementations called other default
implementations directly, rather than to the underlying Folder, with the
result of some AST nodes never being visited even if the user implemented that
method. (For example, the current Folder never folded struct fields)
This commit solves this situation somewhat radically by making _all_
`fold_...` functions in the module into Folder methods, and implementing
them all in terms of public `noop_...` functions for other implementors to
call out to.
Some public functions had to be renamed to fit the new system, so this is a
breaking change.
[breaking-change]
the CFG for match statements.
There were two bugs in issue #14684. One was simply that the borrow
check didn't know about the correct CFG for match statements: the
pattern must be a predecessor of the guard. This disallows the bad
behavior if there are bindings in the pattern. But it isn't enough to
prevent the memory safety problem, because of wildcards; thus, this
patch introduces a more restrictive rule, which disallows assignments
and mutable borrows inside guards outright.
I discussed this with Niko and we decided this was the best plan of
action.
This breaks code that performs mutable borrows in pattern guards. Most
commonly, the code looks like this:
impl Foo {
fn f(&mut self, ...) {}
fn g(&mut self, ...) {
match bar {
Baz if self.f(...) => { ... }
_ => { ... }
}
}
}
Change this code to not use a guard. For example:
impl Foo {
fn f(&mut self, ...) {}
fn g(&mut self, ...) {
match bar {
Baz => {
if self.f(...) {
...
} else {
...
}
}
_ => { ... }
}
}
}
Sometimes this can result in code duplication, but often it illustrates
a hidden memory safety problem.
Closes#14684.
[breaking-change]
This makes edge cases in which the `Iterator` trait was not in scope
and/or `Option` or its variants were not in scope work properly.
This breaks code that looks like:
struct MyStruct { ... }
impl MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
for x in MyStruct { ... } { ... }
Change ad-hoc `next` methods like the above to implementations of the
`Iterator` trait. For example:
impl Iterator<int> for MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
Closes#15392.
[breaking-change]
This is done entirely in the libraries for functions up to 16 arguments.
A macro is used so that more arguments can be easily added if we need.
Note that I had to adjust the overloaded call algorithm to not try
calling the overloaded call operator if the callee is a built-in
function type, to prevent loops.
Closes#15448.
This eliminates the last vestige of the `~` syntax.
Instead of `~self`, write `self: Box<TypeOfSelf>`; instead of `mut
~self`, write `mut self: Box<TypeOfSelf>`, replacing `TypeOfSelf` with
the self-type parameter as specified in the implementation.
Closes#13885.
[breaking-change]
Emit a single rt::Piece per consecutive string literals. String literals
are split on {{ or }} escapes.
Saves a small amount of static storage and emitted code size.
In f1ad425199, I changed the handling
of macros, to prevent macro invocations from occurring in fully expanded
source. Instead, I added a side table. It contained only the
spans of the macros, because this was the only information required
in order to make macro export work.
However, librustdoc was also affected by this change, since it
extracts macro information in a similar way. As a result of the earlier
change, exported macros were no longer documented.
In order to repair this, I've adjusted the side table to contain whole
items, rather than just the spans.
except where trait objects are involved.
Part of issue #15349, though I'm leaving it open for trait objects.
Cross borrowing for trait objects remains because it is needed until we
have DST.
This will break code like:
fn foo(x: &int) { ... }
let a = box 3i;
foo(a);
Change this code to:
fn foo(x: &int) { ... }
let a = box 3i;
foo(&*a);
[breaking-change]
This makes two changes to region inference: (1) it allows region
inference to relate early-bound regions; and (2) it allows regions to be
related before variance runs. The former is needed because there is no
relation between the two regions before region substitution happens,
while the latter is needed because type collection has to run before
variance. We assume that, before variance is inferred, that lifetimes
are invariant. This is a conservative overapproximation.
This relates to #13885. This does not remove `~self` from the language
yet, however.
[breaking-change]
This patch applies the excellent suggestion of @pnkfelix to group the helper methods for method field access into a Trait, making the code much more readable, and much more similar to the way it was before.
Per @pnkfelix 's suggestion, using a trait to make these
field accesses more readable (and vastly more similar
to the original code.
oops fix new ast_map fix
please note the snapshot-waiting unpleasantness. I'm
unable to use the traditional #[cfg(stage0)] mechanism
to swap the new style in for later compiler stages,
because macros invocations in method positions cause
the parser to choke before cfg can strip it out.
Parenthetical note: this problem wouldn't arise with
an interleaved parsing/expansion....
Use one or more of the following `-Z` flag options to tell the
graphviz renderer to include the corresponding dataflow sets (after
the iterative constraint propagation reaches a fixed-point solution):
* `-Z flowgraph-print-loans` : loans computed via middle::borrowck
* `-Z flowgraph-print-moves` : moves computed via middle::borrowck::move_data
* `-Z flowgraph-print-assigns` : assignments, via middle::borrowck::move_data
* `-Z flowgraph-print-all` : all of the available sets are included.
Fix#15016.
----
This also adds a module, `syntax::ast_map::blocks`, that captures a
common abstraction shared amongst code blocks and procedure-like
things. As part of this, moved `ast_map.rs` to subdir
`ast_map/mod.rs`, to follow our directory layout conventions.
(incorporated review feedback from huon, acrichto.)
This patch adds support for macros in method position. It follows roughly the template for Item macros, where an outer `Method` wrapper contains a `Method_` enum which can either be a macro invocation or a standard macro definition.
One note; adding support for macros that expand into multiple methods is not included here, but should be a simple parser change, since this patch updates the type of fold_macro to return a smallvector of methods.
For reviewers, please pay special attention to the parser changes; these are the ones I'm most concerned about.
Because of the small change to the interface of fold_method, this is a ...
[breaking change]
