The current codegen tests only compare IR line counts between similar
rust and C programs, the latter getting compiled with clang. That looked
like a good idea back then, but actually things like lifetime intrinsics
mean that less IR isn't always better, so the metric isn't really
helpful.
Instead, we can start doing tests that check specific aspects of the
generated IR, like attributes or metadata. To do that, we can use LLVM's
FileCheck tool which has a number of useful features for such tests.
To start off, I created some tests for a few things that were recently
added and/or broken.
An automated script was run against the `.rs` and `.md` files,
subsituting every occurrence of `task` with `thread`. In the `.rs`
files, only the texts in the comment blocks were affected.
E.g. if `foo.rs` looks like
#![feature(test)]
extern crate test;
#[bench]
fn bar(b: &mut test::Bencher) {
b.iter(|| {
1
})
}
#[test]
fn baz() {}
#[bench]
fn qux(b: &mut test::Bencher) {
b.iter(|| {
panic!()
})
}
Then
$ rustc --test foo.rs
$ ./foo
running 3 tests
test baz ... ok
test qux ... FAILED
test bar ... ok
failures:
---- qux stdout ----
thread 'qux' panicked at 'explicit panic', bench.rs:17
failures:
qux
test result: FAILED. 2 passed; 1 failed; 0 ignored; 0 measured
$ ./foo --bench ba
running 2 tests
test baz ... ignored
test bar ... bench: 97 ns/iter (+/- 74)
test result: ok. 0 passed; 0 failed; 1 ignored; 1 measured
In particular, the two benchmark are being run as tests in the default
mode.
This helps for the main distribution, since benchmarks are only run with
`PLEASE_BENCH=1`, which is rarely set (and never set on the test bots),
and helps for code-coverage tools: benchmarks are run and so don't count
as dead code.
Fixes#15842.
This required fixing the `pretty-rpass-full` tests to have the same `$$(CSREQ$(1)_T_$(2)_H_$(3))` dependencies as the `rpass-full` and `cfail-full` tests. It also required fixing the `run-make/simd-ffi` test to use unique names for its output files.
The run-pass and pretty run-pass tests could run concurrently, and if they
do, they need to keep their output segregated.
This change might be overkill. We need the suffix for the `pretty` mode,
but we might not need it otherwise. The `debuginfo-lldb` and
`debuginfo-gdb` modes look like they could also need it, but the current
`tests.mk` file happens not to enable both lldb and gdb at the same time,
for incidental reasons.
PR #24242 added the ability to the compiler to directly give suggestions about
how to modify code to fix an error. The new errors look like this:
foobar.rs:5:12: 5:25 error: expected a path on the left-hand side of `+`,
not `&'static Copy` [E0178]
foobar.rs:5 let x: &'static Copy + 'static;
^~~~~~~~~~~~~
foobar.rs:5:12: 5:35 help: try adding parentheses (per RFC 438):
foobar.rs: let x: &'static (Copy + 'static);
foobar.rs:2:13: 2:23 error: cast to unsized type: `&_` as `core::marker::Copy`
foobar.rs:2 let x = &1 as Copy;
^~~~~~~~~~
foobar.rs:2:19: 2:23 help: try casting to a reference instead:
foobar.rs: let x = &1 as &Copy;
foobar.rs:7:24: 7:25 error: expected expression, found `;`
foobar.rs:7 let x = box (1 + 1);
^
foobar.rs:7:13: 7:16 help: try using `box()` instead:
foobar.rs: let x = box() (1 + 1);
This also modifies compiletest to give the ability to directly test suggestions
given by error messages.
Add a new test directory called 'rustdoc' where all files inside are documented
and run against the `htmldocck` script to have assertions about the output.
This commit is an implementation of [RFC 979][rfc] which changes the meaning of
the count parameter to the `splitn` function on strings and slices. The
parameter now means the number of items that are returned from the iterator, not
the number of splits that are made.
[rfc]: https://github.com/rust-lang/rfcs/pull/979Closes#23911
[breaking-change]
for `Box<FnBox()>`. I found the alias was still handy because it is
shorter than the fully written type.
This is a [breaking-change]: convert code using `Invoke` to use `FnBox`,
which is usually pretty straight-forward. Code using thunk mostly works
if you change `Thunk::new => Box::new` and `foo.invoke(arg)` to
`foo(arg)`.
* Marks `#[stable]` the contents of the `std::convert` module.
* Added methods `PathBuf::as_path`, `OsString::as_os_str`,
`String::as_str`, `Vec::{as_slice, as_mut_slice}`.
* Deprecates `OsStr::from_str` in favor of a new, stable, and more
general `OsStr::new`.
* Adds unstable methods `OsString::from_bytes` and `OsStr::{to_bytes,
to_cstring}` for ergonomic FFI usage.
[breaking-change]
This commit:
* Introduces `std::convert`, providing an implementation of
RFC 529.
* Deprecates the `AsPath`, `AsOsStr`, and `IntoBytes` traits, all
in favor of the corresponding generic conversion traits.
Consequently, various IO APIs now take `AsRef<Path>` rather than
`AsPath`, and so on. Since the types provided by `std` implement both
traits, this should cause relatively little breakage.
* Deprecates many `from_foo` constructors in favor of `from`.
* Changes `PathBuf::new` to take no argument (creating an empty buffer,
as per convention). The previous behavior is now available as
`PathBuf::from`.
* De-stabilizes `IntoCow`. It's not clear whether we need this separate trait.
Closes#22751Closes#14433
[breaking-change]
This commit removes the reexports of `old_io` traits as well as `old_path` types
and traits from the prelude. This functionality is now all deprecated and needs
to be removed to make way for other functionality like `Seek` in the `std::io`
module (currently reexported as `NewSeek` in the io prelude).
Closes#23377Closes#23378
This commit clarifies some of the unstable features in the `str` module by
moving them out of the blanket `core` and `collections` features.
The following methods were moved to the `str_char` feature which generally
encompasses decoding specific characters from a `str` and dealing with the
result. It is unclear if any of these methods need to be stabilized for 1.0 and
the most conservative route for now is to continue providing them but to leave
them as unstable under a more specific name.
* `is_char_boundary`
* `char_at`
* `char_range_at`
* `char_at_reverse`
* `char_range_at_reverse`
* `slice_shift_char`
The following methods were moved into the generic `unicode` feature as they are
specifically enabled by the `unicode` crate itself.
* `nfd_chars`
* `nfkd_chars`
* `nfc_chars`
* `graphemes`
* `grapheme_indices`
* `width`
This commit performs a stabilization pass over the std::net module,
incorporating the changes from RFC 923. Specifically, the following actions were
taken:
Stable functionality:
* `net` (the name)
* `Shutdown`
* `Shutdown::{Read, Write, Both}`
* `lookup_host`
* `LookupHost`
* `SocketAddr`
* `SocketAddr::{V4, V6}`
* `SocketAddr::port`
* `SocketAddrV4`
* `SocketAddrV4::{new, ip, port}`
* `SocketAddrV6`
* `SocketAddrV4::{new, ip, port, flowinfo, scope_id}`
* Common trait impls for socket addr structures
* `ToSocketAddrs`
* `ToSocketAddrs::Iter`
* `ToSocketAddrs::to_socket_addrs`
* `ToSocketAddrs for {SocketAddr*, (Ipv*Addr, u16), str, (str, u16)}`
* `Ipv4Addr`
* `Ipv4Addr::{new, octets, to_ipv6_compatible, to_ipv6_mapped}`
* `Ipv6Addr`
* `Ipv6Addr::{new, segments, to_ipv4}`
* `TcpStream`
* `TcpStream::connect`
* `TcpStream::{peer_addr, local_addr, shutdown, try_clone}`
* `{Read,Write} for {TcpStream, &TcpStream}`
* `TcpListener`
* `TcpListener::bind`
* `TcpListener::{local_addr, try_clone, accept, incoming}`
* `Incoming`
* `UdpSocket`
* `UdpSocket::bind`
* `UdpSocket::{recv_from, send_to, local_addr, try_clone}`
Unstable functionality:
* Extra methods on `Ipv{4,6}Addr` for various methods of inspecting the address
and determining qualities of it.
* Extra methods on `TcpStream` to configure various protocol options.
* Extra methods on `UdpSocket` to configure various protocol options.
Deprecated functionality:
* The `socket_addr` method has been renamed to `local_addr`
This commit is a breaking change due to the restructuring of the `SocketAddr`
type as well as the renaming of the `socket_addr` method. Migration should be
fairly straightforward, however, after accounting for the new level of
abstraction in `SocketAddr` (protocol distinction at the socket address level,
not the IP address).
[breaking-change]
This commit stabilizes essentially all of the new `std::path` API. The
API itself is changed in a couple of ways (which brings it in closer
alignment with the RFC):
* `.` components are now normalized away, unless they appear at the
start of a path. This in turn effects the semantics of e.g. asking for
the file name of `foo/` or `foo/.`, both of which yield `Some("foo")`
now. This semantics is what the original RFC specified, and is also
desirable given early experience rolling out the new API.
* The `parent` function now succeeds if, and only if, the path has at
least one non-root/prefix component. This change affects `pop` as
well.
* The `Prefix` component now involves a separate `PrefixComponent`
struct, to better allow for keeping both parsed and unparsed prefix data.
In addition, the `old_path` module is now deprecated.
Closes#23264
[breaking-change]
This commit performs another pass over the `std::char` module for stabilization.
Some minor cleanup is performed such as migrating documentation from libcore to
libunicode (where the `std`-facing trait resides) as well as a slight
reorganiation in libunicode itself. Otherwise, the stability modifications made
are:
* `char::from_digit` is now stable
* `CharExt::is_digit` is now stable
* `CharExt::to_digit` is now stable
* `CharExt::to_{lower,upper}case` are now stable after being modified to return
an iterator over characters. While the implementation today has not changed
this should allow us to implement the full set of case conversions in unicode
where some characters can map to multiple when doing an upper or lower case
mapping.
* `StrExt::to_{lower,upper}case` was added as unstable for a convenience of not
having to worry about characters expanding to more characters when you just
want the whole string to get into upper or lower case.
This is a breaking change due to the change in the signatures of the
`CharExt::to_{upper,lower}case` methods. Code can be updated to use functions
like `flat_map` or `collect` to handle the difference.
[breaking-change]
Closes#20333
This commit performs another pass over the `std::char` module for stabilization.
Some minor cleanup is performed such as migrating documentation from libcore to
libunicode (where the `std`-facing trait resides) as well as a slight
reorganiation in libunicode itself. Otherwise, the stability modifications made
are:
* `char::from_digit` is now stable
* `CharExt::is_digit` is now stable
* `CharExt::to_digit` is now stable
* `CharExt::to_{lower,upper}case` are now stable after being modified to return
an iterator over characters. While the implementation today has not changed
this should allow us to implement the full set of case conversions in unicode
where some characters can map to multiple when doing an upper or lower case
mapping.
* `StrExt::to_{lower,upper}case` was added as unstable for a convenience of not
having to worry about characters expanding to more characters when you just
want the whole string to get into upper or lower case.
This is a breaking change due to the change in the signatures of the
`CharExt::to_{upper,lower}case` methods. Code can be updated to use functions
like `flat_map` or `collect` to handle the difference.
[breaking-change]
This commit performs a stabilization pass over the `std::fs` module now that
it's had some time to bake. The change was largely just adding `#[stable]` tags,
but there are a few APIs that remain `#[unstable]`.
The following apis are now marked `#[stable]`:
* `std::fs` (the name)
* `File`
* `Metadata`
* `ReadDir`
* `DirEntry`
* `OpenOptions`
* `Permissions`
* `File::{open, create}`
* `File::{sync_all, sync_data}`
* `File::set_len`
* `File::metadata`
* Trait implementations for `File` and `&File`
* `OpenOptions::new`
* `OpenOptions::{read, write, append, truncate, create}`
* `OpenOptions::open` - this function was modified, however, to not attempt to
reject cross-platform openings of directories. This means that some platforms
will succeed in opening a directory and others will fail.
* `Metadata::{is_dir, is_file, len, permissions}`
* `Permissions::{readonly, set_readonly}`
* `Iterator for ReadDir`
* `DirEntry::path`
* `remove_file` - like with `OpenOptions::open`, the extra windows code to
remove a readonly file has been removed. This means that removing a readonly
file will succeed on some platforms but fail on others.
* `metadata`
* `rename`
* `copy`
* `hard_link`
* `soft_link`
* `read_link`
* `create_dir`
* `create_dir_all`
* `remove_dir`
* `remove_dir_all`
* `read_dir`
The following apis remain `#[unstable]`.
* `WalkDir` and `walk` - there are many methods by which a directory walk can be
constructed, and it's unclear whether the current semantics are the right
ones. For example symlinks are not handled super well currently. This is now
behind a new `fs_walk` feature.
* `File::path` - this is an extra abstraction which the standard library
provides on top of what the system offers and it's unclear whether we should
be doing so. This is now behind a new `file_path` feature.
* `Metadata::{accessed, modified}` - we do not currently have a good
abstraction for a moment in time which is what these APIs should likely be
returning, so these remain `#[unstable]` for now. These are now behind a new
`fs_time` feature
* `set_file_times` - like with `Metadata::accessed`, we do not currently have
the appropriate abstraction for the arguments here so this API remains
unstable behind the `fs_time` feature gate.
* `PathExt` - the precise set of methods on this trait may change over time and
some methods may be removed. This API remains unstable behind the `path_ext`
feature gate.
* `set_permissions` - we may wish to expose a more granular ability to set the
permissions on a file instead of just a blanket "set all permissions" method.
This function remains behind the `fs` feature.
The following apis are now `#[deprecated]`
* The `TempDir` type is now entirely deprecated and is [located on
crates.io][tempdir] as the `tempdir` crate with [its source][github] at
rust-lang/tempdir.
[tempdir]: https://crates.io/crates/tempdir
[github]: https://github.com/rust-lang/tempdir
The stability of some of these APIs has been questioned over the past few weeks
in using these APIs, and it is intentional that the majority of APIs here are
marked `#[stable]`. The `std::fs` module has a lot of room to grow and the
material is [being tracked in a RFC issue][rfc-issue].
[rfc-issue]: https://github.com/rust-lang/rfcs/issues/939
[breaking-change]
