Couple of changes to FileSearch and SearchPath
* Turn a couple of regular comments into doc comments
* Move `get_tools_search_paths` from `FileSearch` to `Session`
* Use Lrc instead of Option to avoid duplication of a `SearchPath`
Introduce -Z remap-cwd-prefix switch
This switch remaps any absolute paths rooted under the current
working directory to a new value. This includes remapping the
debug info in `DW_AT_comp_dir` and `DW_AT_decl_file`.
Importantly, this flag does not require passing the current working
directory to the compiler, such that the command line can be
run on any machine (with the same input files) and produce the
same results. This is critical property for debugging compiler
issues that crop up on remote machines.
This is based on adetaylor's dbc4ae7cba
Major Change Proposal: https://github.com/rust-lang/compiler-team/issues/450
Discussed on #38322. Would resolve issue #87325.
Add -Z panic-in-drop={unwind,abort} command-line option
This PR changes `Drop` to abort if an unwinding panic attempts to escape it, making the process abort instead. This has several benefits:
- The current behavior when unwinding out of `Drop` is very unintuitive and easy to miss: unwinding continues, but the remaining drops in scope are simply leaked.
- A lot of unsafe code doesn't expect drops to unwind, which can lead to unsoundness:
- https://github.com/servo/rust-smallvec/issues/14
- https://github.com/bluss/arrayvec/issues/3
- There is a code size and compilation time cost to this: LLVM needs to generate extra landing pads out of all calls in a drop implementation. This can compound when functions are inlined since unwinding will then continue on to process drops in the callee, which can itself unwind, etc.
- Initial measurements show a 3% size reduction and up to 10% compilation time reduction on some crates (`syn`).
One thing to note about `-Z panic-in-drop=abort` is that *all* crates must be built with this option for it to be sound since it makes the compiler assume that dropping `Box<dyn Any>` will never unwind.
cc https://github.com/rust-lang/lang-team/issues/97
We can instead if either the LHS or RHS types contain
`TyKind::Error`. In addition to covering the case where
we would have previously updated `if_let_suggestions`, this might
also prevent redundant errors in other cases as well.
Remove `Session.trait_methods_not_found`
Instead, avoid registering the problematic well-formed obligation
to begin with. This removes global untracked mutable state,
and avoids potential issues with incremental compilation.
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Instead, avoid registering the problematic well-formed obligation
to begin with. This removes global untracked mutable state,
and avoids potential issues with incremental compilation.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Fixes#85019
A `SourceFile` created during compilation may have a relative
path (e.g. if rustc itself is invoked with a relative path).
When we write out crate metadata, we convert all relative paths
to absolute paths using the current working direction.
However, the working directory is not included in the crate hash.
This means that the crate metadata can change while the crate
hash remains the same. Among other problems, this can cause a
fingerprint mismatch ICE, since incremental compilation uses
the crate metadata hash to determine if a foreign query is green.
This commit moves the field holding the working directory from
`Session` to `Options`, including it as part of the crate hash.
Plugin interface cleanup
The first commit performs two uncontroversial cleanups. The second commit removes `#[plugin_registrar]` and instead requires you to export a `__rustc_plugin_registrar` function, this will require a change to servo's script_plugins (cc `@jdm)`
Fix feature gate checking of static-nobundle and native_link_modifiers
Feature native_link_modifiers_bundle don't need feature static-nobundle
to work.
Also check the feature gates when using native_link_modifiers from command line options. Current nighly compiler don't check those feature gate.
```
> touch lib.rs
> rustc +nightly lib.rs -L /usr/lib -l static:+bundle=dl --crate-type=rlib
> rustc +nightly lib.rs -L /usr/lib -l dylib:+as-needed=dl --crate-type=dylib -Ctarget-feature=-crt-static
> rustc +nightly lib.rs -L /usr/lib -l static:-bundle=dl --crate-type=rlib
error[E0658]: kind="static-nobundle" is unstable
|
= note: see issue #37403 <https://github.com/rust-lang/rust/issues/37403> for more information
= help: add `#![feature(static_nobundle)]` to the crate attributes to enable
error: aborting due to previous error
For more information about this error, try `rustc --explain E0658`.
```
First found this in https://github.com/rust-lang/rust/pull/85600#discussion_r676612655
Fix overflow in rustc happening if the `err_count()` is reduced in a stage.
This can happen if stashed diagnostics are removed or replaced with fewer errors. The semantics stay the same if built without overflow checks. Fixes#84219.
Background: I came across this independently by running `RUSTFLAGS="-C overflow-checks=on" ./x.py test`. Fixing this will allow us to move on and find further overflow errors with testing or fuzzing.
Add back -Zno-profiler-runtime
This was removed by #85284 in favor of `-Zprofiler-runtime=<name>`.However the suggested `-Zprofiler-runtime=None` doesn't work because`None` is treated as a crate name.
This was removed by #85284 in favor of -Zprofiler-runtime=<name>.
However the suggested -Zprofiler-runtime=None doesn't work because
"None" is treated as a crate name.
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Add flag to configure `large_assignments` lint
The `large_assignments` lints detects moves over specified limit. The
limit is configured through `move_size_limit = "N"` attribute placed at
the root of a crate. When attribute is absent, the lint is disabled.
Make it possible to enable the lint without making any changes to the
source code, through a new flag `-Zmove-size-limit=N`. For example, to
detect moves exceeding 1023 bytes in a cargo crate, including all
dependencies one could use:
```
$ env RUSTFLAGS=-Zmove-size-limit=1024 cargo build -vv
```
Lint tracking issue #83518.
Remove unstable `--pretty` flag
It doesn't do anything `--unpretty` doesn't, and due to a bug, also
didn't show up in `--help`. I don't think there's any reason to keep it
around, I haven't seen anyone using it.
Closes https://github.com/rust-lang/rust/issues/36473.
Allow combining -Cprofile-generate and -Cpanic=unwind when targeting MSVC.
The LLVM limitation that previously prevented this has been fixed in LLVM 9 which is older than the oldest LLVM version we currently support.
Fixes https://github.com/rust-lang/rust/issues/61002.
r? ``@nagisa`` (or anyone else from ``@rust-lang/wg-llvm)``
Profile incremental compilation hashing fingerprints
Adds profiling instrumentation for the hashing of incremental compilation fingerprints per query.
This will eventually feed into the `measureme` and `rustc-perf` infrastructure for tracking if computing hashes changes over time.
TODOs:
* [x] Address the FIXME where we are including node interning in the hash timing.
* [ ] Update measureme/summarize to handle this new data: https://github.com/rust-lang/measureme/pull/166
* [ ] ~Update rustc-perf to handle the new data from measureme~ (will be done at a later time)
r? `@ghost`
cc `@michaelwoerister`
MSVC.
The LLVM limitation that previously prevented this has been fixed in LLVM
9 which is older than the oldest LLVM version we currently support.
See https://github.com/rust-lang/rust/issues/61002.
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
The `large_assignments` lints detects moves over specified limit. The
limit is configured through `move_size_limit = "N"` attribute placed at
the root of a crate. When attribute is absent, the lint is disabled.
Make it possible to enable the lint without making any changes to the
source code, through a new flag `-Zmove-size-limit=N`. For example, to
detect moves exceeding 1023 bytes in a cargo crate, including all
dependencies one could use:
```
$ env RUSTFLAGS=-Zmove-size-limit=1024 cargo build -vv
```
add `track_path::path` fn for usage in `proc_macro`s
Adds a way to declare a dependency on external files without including them, to either re-trigger the build of a file as well as covering the use case of including dependencies within the `rustc` invocation, such that tools like `sccache`/`cachepot` are able to handle references to external files which are not included.
Ref #73921
Add support for leaf function frame pointer elimination
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
Remove unused dependencies from compiler crates
Various compiler crates have dependencies that they don't appear to use. I used some scripting to detect such dependencies, filtered them based on some manual review, and removed those that do indeed appear to be entirely unused.
This PR adds ability for the target specifications to specify frame
pointer emission type that's not just “always” or “whatever cg decides”.
In particular there's a new mode that allows omission of the frame
pointer for leaf functions (those that don't call any other functions).
We then set this new mode for Aarch64-based Apple targets.
Fixes#86196
This creates a CSV with name "closure_profile_XXXXX.csv", where the
variable part is the process id of the compiler.
To profile a cargo project you can run one of the following depending on
if you're compiling a library or a binary:
```
cargo +stage1 rustc --lib -- -Zprofile-closures
cargo +stage1 rustc --bin -- -Zprofile-closures
```
Allow loading of llvm plugins on nightly
Based on a discussion in #82734 / with `@wsmoses.`
Mainly moves [this](0149bc4e7e) behind a -Z flag, so it can only be used on nightly,
as requested by `@nagisa` in https://github.com/rust-lang/rust/issues/82734#issuecomment-835863940
This change allows loading of llvm plugins like Enzyme.
Right now it also requires a shared library LLVM build of rustc for symbol resolution.
```rust
// test.rs
extern { fn __enzyme_autodiff(_: usize, ...) -> f64; }
fn square(x : f64) -> f64 {
return x * x;
}
fn main() {
unsafe {
println!("Hello, world {} {}!", square(3.0), __enzyme_autodiff(square as usize, 3.0));
}
}
```
```
./rustc test.rs -Z llvm-plugins="./LLVMEnzyme-12.so" -C passes="enzyme"
./test
Hello, world 9 6!
```
I will try to figure out how to simplify the usage and get this into stable in a later iteration,
but having this on nightly will already help testing further steps.
Emit warnings for unused fields in custom targets.
Add a warning which lists any fields in a custom target `json` file that aren't used. Currently unrecognized fields are ignored so, for example, a typo in the `json` will silently produce a target which isn't the one intended.
Provide option for specifying the profiler runtime
Currently, if `-Zinstrument-coverage` is enabled, the target is linked
against the `library/profiler_builtins` crate (which pulls in LLVM's
compiler-rt runtime).
This option enables backends to specify an alternative runtime crate for
handling injected instrumentation calls.
Fix force-warns to allow dashes.
The `--force-warns` flag was not allowing lint names with dashes, only supporting underscores. This changes it to allow dashes to match the behavior of the A/W/D/F flags.
ignore test if rust-lld not found
create ld -> rust-lld symlink at build time instead of run time
for testing in ci
copy instead of symlinking
remove linux check
test for linker, suggestions from bjorn3
fix overly restrictive lld matcher
use -Zgcc-ld flag instead of -Clinker-flavor
refactor code adding lld to gcc path
revert ci changes
suggestions from petrochenkov
rename gcc_ld to gcc-ld in dirs
Implement DepTrackingHash for `Option` through blanket impls instead of macros
This avoids having to add a new macro call for both the `Option` and the type itself.
Noticed this while working on https://github.com/rust-lang/rust/pull/84233.
r? `@Aaron1011`
Support for force-warns
Implements https://github.com/rust-lang/rust/issues/85512.
This PR adds a new command line option `force-warns` which will force the provided lints to warn even if they are allowed by some other mechanism such as `#![allow(warnings)]`.
Some remaining issues:
* https://github.com/rust-lang/rust/issues/85512 mentions that `force-warns` should also be capable of taking lint groups instead of individual lints. This is not implemented.
* If a lint has a higher warning level than `warn`, this will cause that lint to warn instead. We probably want to allow the lint to error if it is set to a higher lint and is not allowed somewhere else.
* One test is currently ignored because it's not working - when a deny-by-default lint is allowed, it does not currently warn under `force-warns`. I'm not sure why, but I wanted to get this in before the weekend.
r? `@nikomatsakis`
Don't sort a `Vec` before computing its `DepTrackingHash`
Previously, we sorted the vec prior to hashing, making the hash
independent of the original (command-line argument) order. However, the
original vec was still always kept in the original order, so we were
relying on the rest of the compiler always working with it in an
'order-independent' way.
This assumption was not being upheld by the `native_libraries` query -
the order of the entires in its result depends on the order of entries
in `Options.libs`. This lead to an 'unstable fingerprint' ICE when the
`-l` arguments were re-ordered.
This PR removes the sorting logic entirely. Re-ordering command-line
arguments (without adding/removing/changing any arguments) seems like a
really niche use case, and correctly optimizing for it would require
additional work. By always hashing arguments in their original order, we
can entirely avoid a cause of 'unstable fingerprint' errors.
Use command line metadata path if provided
If the command-line has `--emit metadata=some/path/libfoo.rmeta` then
use that.
Closes#85356
I couldn't find any existing tests for the `--emit TYPE=PATH` command line syntax, so I wasn't sure how to test this aside from ad-hoc manual testing. Is there a ui test type for "generated output file with expected name"?
Previously, we sorted the vec prior to hashing, making the hash
independent of the original (command-line argument) order. However, the
original vec was still always kept in the original order, so we were
relying on the rest of the compiler always working with it in an
'order-independent' way.
This assumption was not being upheld by the `native_libraries` query -
the order of the entires in its result depends on the order of entries
in `Options.libs`. This lead to an 'unstable fingerprint' ICE when the
`-l` arguments were re-ordered.
This PR removes the sorting logic entirely. Re-ordering command-line
arguments (without adding/removing/changing any arguments) seems like a
really niche use case, and correctly optimizing for it would require
additional work. By always hashing arguments in their original order, we
can entirely avoid a cause of 'unstable fingerprint' errors.
Use TargetTriple::from_path in rustdoc
This fixes the problem reported in https://github.com/Rust-for-Linux/linux/pull/272 where rustdoc requires the absolute path of a target spec json instead of accepting a relative path like rustc.
Currently, if `-Zinstrument-coverage` is enabled, the target is linked
against the `library/profiler_builtins` crate (which pulls in LLVM's
compiler-rt runtime).
This option enables backends to specify an alternative runtime crate for
handling injected instrumentation calls.
Introduce the beginning of a THIR unsafety checker
This poses the foundations for the THIR unsafety checker, so that it can be implemented incrementally:
- implements a rudimentary `Visitor` for the THIR (which will definitely need some tweaking in the future)
- introduces a new `-Zthir-unsafeck` flag which tells the compiler to use THIR unsafeck instead of MIR unsafeck
- implements detection of unsafe functions
- adds revisions to the UI tests to test THIR unsafeck alongside MIR unsafeck
This uses a very simple query design, where bodies are unsafety-checked on a body per body basis. This however has some big flaws:
- the unsafety-checker builds the THIR itself, which means a lot of work is duplicated with MIR building constructing its own copy of the THIR
- unsafety-checking closures is currently completely wrong: closures should take into account the "safety context" in which they are created, here we are considering that closures are always a safe context
I had intended to fix these problems in follow-up PRs since they are always gated under the `-Zthir-unsafeck` flag (which is explicitely noted to be unsound).
r? `@nikomatsakis`
cc https://github.com/rust-lang/project-thir-unsafeck/issues/3https://github.com/rust-lang/project-thir-unsafeck/issues/7
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Add default search path to `Target::search()`
The function `Target::search()` accepts a target triple and returns a `Target` struct defining the requested target.
There is a `// FIXME 16351: add a sane default search path?` comment that indicates it is desirable to include some sort of default. This was raised in https://github.com/rust-lang/rust/issues/16351 which was closed without any resolution.
https://github.com/rust-lang/rust/pull/31117 was proposed, however that has platform-specific logic that is unsuitable for systems without `/etc/`.
This patch implements the suggestion raised in https://github.com/rust-lang/rust/issues/16351#issuecomment-180878193 where a `target.json` file may be placed in `$(rustc --print sysroot)/lib/rustlib/<target-triple>/target.json`. This allows shipping a toolchain distribution as a single file that gets extracted to the sysroot.
Improve support for NewPM
This adds various missing bits of support for NewPM and allows us to successfully run stage 2 tests with NewPM enabled.
This does not yet enable NewPM by default, as there are still known issue on LLVM 12 (such as a weak fat LTO pipeline). The plan is to make the switch after we update to LLVM 13.
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
This is necessary for options that should invalidate the incremental
hash but *not* affect the crate hash (e.g. --remap-path-prefix).
This doesn't add `for_crate_hash` to the trait directly because it's not
relevant for *types*, only for *options*, which are fields on a larger
struct. Instead, it adds a new `SUBSTRUCT` directive for options, which
does take a `for_crate_hash` parameter.
- Use TRACKED_NO_CRATE_HASH for --remap-path-prefix
- Add test that `remap_path_prefix` is tracked
- Reduce duplication in the test suite to avoid future churn
Implement a lint that highlights all moves larger than a configured limit
Tracking issue: #83518
[MCP 420](https://github.com/rust-lang/compiler-team/issues/420) still ~blazing~ in progress
r? ```@pnkfelix```
The main open issue I see with this minimal impl of the feature is that the lint is immediately "stable" (so it can be named on stable), even if it is never executed on stable. I don't think we have the concept of unstable lint names or hiding lint names without an active feature gate, so that would be a bigger change.
Make a few functions private
These were made public in 3105bcfdc1. This
is so long ago I doubt anyone remembers why they're public. No one outside rustc_session uses
them, including in-tree tools.
It doesn't do anything `--unpretty` doesn't, and due to a bug, also
didn't show up in `--help`. I don't think there's any reason to keep it
around, I haven't seen anyone using it.
This PR modifies the macro expansion infrastructure to handle attributes
in a fully token-based manner. As a result:
* Derives macros no longer lose spans when their input is modified
by eager cfg-expansion. This is accomplished by performing eager
cfg-expansion on the token stream that we pass to the derive
proc-macro
* Inner attributes now preserve spans in all cases, including when we
have multiple inner attributes in a row.
This is accomplished through the following changes:
* New structs `AttrAnnotatedTokenStream` and `AttrAnnotatedTokenTree` are introduced.
These are very similar to a normal `TokenTree`, but they also track
the position of attributes and attribute targets within the stream.
They are built when we collect tokens during parsing.
An `AttrAnnotatedTokenStream` is converted to a regular `TokenStream` when
we invoke a macro.
* Token capturing and `LazyTokenStream` are modified to work with
`AttrAnnotatedTokenStream`. A new `ReplaceRange` type is introduced, which
is created during the parsing of a nested AST node to make the 'outer'
AST node aware of the attributes and attribute target stored deeper in the token stream.
* When we need to perform eager cfg-expansion (either due to `#[derive]` or `#[cfg_eval]`),
we tokenize and reparse our target, capturing additional information about the locations of
`#[cfg]` and `#[cfg_attr]` attributes at any depth within the target.
This is a performance optimization, allowing us to perform less work
in the typical case where captured tokens never have eager cfg-expansion run.
This enables us to set more generic labels shared between targets. For
example `target_family="wasm"` across all targets that are conceptually
"wasm".
See https://github.com/rust-lang/reference/pull/1006
The addition of `cfg(wasm)` was an oversight on my end that has a number
of downsides:
* It was introduced as an insta-stable addition, forgoing the usual
staging mechanism we use for potentially far-reaching changes;
* It is a breaking change for people who are using `--cfg wasm` either
directly or via cargo for other purposes;
* It is not entirely clear if a bare `wasm` cfg is a right option or
whether `wasm` family of targets are special enough to warrant
special-casing these targets specifically.
As for the last point, there appears to be a fair amount of support for
reducing the boilerplate in specifying architectures from the same
family, while ignoring their pointer width. The suggested way forward
would be to propose such a change as a separate RFC as it is potentially
a quite contentious addition.
Use FromStr trait for number option parsing
Replace `parse_uint` with generic `parse_number` based on `FromStr`.
Use it for parsing inlining threshold to avoid casting later.
Add an unstable --json=unused-externs flag to print unused externs
This adds an unstable flag to print a list of the extern names not used by cargo.
This PR will enable cargo to collect unused dependencies from all units and provide warnings.
The companion PR to cargo is: https://github.com/rust-lang/cargo/pull/8437
The goal is eventual stabilization of this flag in rustc as well as in cargo.
Discussion of this feature is mostly contained inside these threads: #57274#72342#72603
The feature builds upon the internal datastructures added by #72342
Externs are uniquely identified by name and the information is sufficient for cargo.
If the mode is enabled, rustc will print json messages like:
```
{"unused_extern_names":["byteorder","openssl","webpki"]}
```
For a crate that got passed byteorder, openssl and webpki dependencies but needed none of them.
### Q: Why not pass -Wunused-crate-dependencies?
A: See [ehuss's comment here](https://github.com/rust-lang/rust/issues/57274#issuecomment-624839355)
TLDR: it's cleaner. Rust's warning system wasn't built to be filtered or edited by cargo.
Even a basic implementation of the feature would have to change the "n warnings emitted" line that rustc prints at the end.
Cargo ideally wants to synthesize its own warnings anyways. For example, it would be hard for rustc to emit warnings like
"dependency foo is only used by dev targets", suggesting to make it a dev-dependency instead.
### Q: Make rustc emit used or unused externs?
A: Emitting used externs has the advantage that it simplifies cargo's collection job.
However, emitting unused externs creates less data to be communicated between rustc and cargo.
Often you want to paste a cargo command obtained from `cargo build -vv` for doing something
completely unrelated. The message is emitted always, even if no warning or error is emitted.
At that point, even this tiny difference in "noise" matters. That's why I went with emitting unused externs.
### Q: One json msg per extern or a collective json msg?
A: Same as above, the data format should be concise. Having 30 lines for the 30 crates a crate uses would be disturbing to readers.
Also it helps the cargo implementation to know that there aren't more unused deps coming.
### Q: Why use names of externs instead of e.g. paths?
A: Names are both sufficient as well as neccessary to uniquely identify a passed `--extern` arg.
Names are sufficient because you *must* pass a name when passing an `--extern` arg.
Passing a path is optional on the other hand so rustc might also figure out a crate's location from the file system.
You can also put multiple paths for the same extern name, via e.g. `--extern hello=/usr/lib/hello.rmeta --extern hello=/usr/local/lib/hello.rmeta`,
but rustc will only ever use one of those paths.
Also, paths don't identify a dependency uniquely as it is possible to have multiple different extern names point to the same path.
So paths are ill-suited for identification.
### Q: What about 2015 edition crates?
A: They are fully supported.
Even on the 2015 edition, an explicit `--extern` flag is is required to enable `extern crate foo;` to work (outside of sysroot crates, which this flag doesn't warn about anyways).
So the lint would still fire on 2015 edition crates if you haven't included a dependency specified in Cargo.toml using `extern crate foo;` or similar.
The lint won't fire if your sole use in the crate is through a `extern crate foo;` statement, but that's not its job.
For detecting unused `extern crate foo` statements, there is the `unused_extern_crates` lint
which can be enabled by `#![warn(unused_extern_crates)]` or similar.
cc ```@jsgf``` ```@ehuss``` ```@petrochenkov``` ```@estebank```
This commit adds an additional target property – `supported_sanitizers`,
and replaces the hardcoded allowlists in argument parsing to use this
new property.
Fixes#81802
- Add back various diagnostic methods on `Session`.
It seems unfortunate to duplicate these in so many places, but in the
meantime, making the API inconsistent between `Session` and `Diagnostic`
also seems unfortunate.
- Add back TyCtxtAt methods
These will hopefully be used in the near future.
- Add back `with_const`, it would need to be added soon after anyway.
- Add back `split()` and `get_mut()`, they're useful.
- Add back `HirIdVec`, with a comment that it will soon be used.
- Add back `*_region` functions, with a comment they may soon be used.
- Remove `-Z borrowck_stats` completely. It didn't do anything.
- Remove `make_nop` completely.
- Add back `current_loc`, which is used by an out-of-tree tool.
- Fix style nits
- Remove `AtomicCell` with `cfg(parallel_compiler)` for consistency.
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Refactor #82270 as lint instead of an error
This PR fixes several issues with #82270 which generated an error when `.intel_syntax` or `.att_syntax` was used in inline assembly:
- It is now a warn-by-default lint instead of an error.
- The lint only triggers on x86. `.intel_syntax` and `.att_syntax` are only valid on x86.
- The lint no longer provides machine-applicable suggestions for two reasons:
- These changes should not be made automatically since changes to assembly code can be very subtle.
- The template string is not always just a string: it can contain macro invocation (`concat!`), raw strings, escape characters, etc.
cc ``@asquared31415``
coverage bug fixes and optimization support
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
FYI: `@wesleywiser`
r? `@tmandry`
Allow not emitting `uwtable` on Android
`uwtable` is marked as required on Android, so it can't be disabled via `-C force-unwind-tables=no`. However, I found that the reason it's marked as required was to resolve a [backtrace issue in Gecko](https://github.com/rust-lang/rust/issues/49867), and I haven't find any other reasons that make it required ([yet](https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/Unwind.20tables.20are.20strictly.20required.20on.20Windows.20and.20Android)). Therefore, I assume it's safe to turn it off if a (nice) backtrace is not needed, and submit this PR to allow `-C force-unwind-tables=no` when targeting Android.
Note that I haven't tested this change on Android as I don't have an Android environment for testing.
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
Make source-based code coverage compatible with MIR inlining
When codegenning code coverage use the instance that coverage data was
originally generated for, to ensure basic level of compatibility with
MIR inlining.
Fixes#83061
Emit error when trying to use assembler syntax directives in `asm!`
The `.intel_syntax` and `.att_syntax` assembler directives should not be used, in favor of not specifying a syntax for intel, and in favor of the explicit `att_syntax` option using the inline assembly options.
Closes#79869
When codegenning code coverage use the instance that coverage data was
originally generated for, to ensure basic level of compatibility with
MIR inlining.
This removes all of the code we had in place to work-around LLVM's
handling of forward progress. From this removal excluded is a workaround
where we'd insert a `sideeffect` into clearly infinite loops such as
`loop {}`. This code remains conditionally effective when the LLVM
version is earlier than 12.0, which fixed the forward progress related
miscompilations at their root.
expand: Refactor module loading
This is an accompanying PR to https://github.com/rust-lang/rust/pull/82399, but they can be landed independently.
See individual commits for more details.
Anyone should be able to review this equally well because all people actually familiar with this code left the project.
Let a portion of DefPathHash uniquely identify the DefPath's crate.
This allows to directly map from a `DefPathHash` to the crate it originates from, without constructing side tables to do that mapping -- something that is useful for incremental compilation where we deal with `DefPathHash` instead of `DefId` a lot.
It also allows to reliably and cheaply check for `DefPathHash` collisions which allows the compiler to gracefully abort compilation instead of running into a subsequent ICE at some random place in the code.
The following new piece of documentation describes the most interesting aspects of the changes:
```rust
/// A `DefPathHash` is a fixed-size representation of a `DefPath` that is
/// stable across crate and compilation session boundaries. It consists of two
/// separate 64-bit hashes. The first uniquely identifies the crate this
/// `DefPathHash` originates from (see [StableCrateId]), and the second
/// uniquely identifies the corresponding `DefPath` within that crate. Together
/// they form a unique identifier within an entire crate graph.
///
/// There is a very small chance of hash collisions, which would mean that two
/// different `DefPath`s map to the same `DefPathHash`. Proceeding compilation
/// with such a hash collision would very probably lead to an ICE and, in the
/// worst case, to a silent mis-compilation. The compiler therefore actively
/// and exhaustively checks for such hash collisions and aborts compilation if
/// it finds one.
///
/// `DefPathHash` uses 64-bit hashes for both the crate-id part and the
/// crate-internal part, even though it is likely that there are many more
/// `LocalDefId`s in a single crate than there are individual crates in a crate
/// graph. Since we use the same number of bits in both cases, the collision
/// probability for the crate-local part will be quite a bit higher (though
/// still very small).
///
/// This imbalance is not by accident: A hash collision in the
/// crate-local part of a `DefPathHash` will be detected and reported while
/// compiling the crate in question. Such a collision does not depend on
/// outside factors and can be easily fixed by the crate maintainer (e.g. by
/// renaming the item in question or by bumping the crate version in a harmless
/// way).
///
/// A collision between crate-id hashes on the other hand is harder to fix
/// because it depends on the set of crates in the entire crate graph of a
/// compilation session. Again, using the same crate with a different version
/// number would fix the issue with a high probability -- but that might be
/// easier said then done if the crates in questions are dependencies of
/// third-party crates.
///
/// That being said, given a high quality hash function, the collision
/// probabilities in question are very small. For example, for a big crate like
/// `rustc_middle` (with ~50000 `LocalDefId`s as of the time of writing) there
/// is a probability of roughly 1 in 14,750,000,000 of a crate-internal
/// collision occurring. For a big crate graph with 1000 crates in it, there is
/// a probability of 1 in 36,890,000,000,000 of a `StableCrateId` collision.
```
Given the probabilities involved I hope that no one will ever actually see the error messages. Nonetheless, I'd be glad about some feedback on how to improve them. Should we create a GH issue describing the problem and possible solutions to point to? Or a page in the rustc book?
r? `@pnkfelix` (feel free to re-assign)
Add option to enable MIR inlining independently of mir-opt-level
Add `-Zinline-mir` option that enables MIR inlining independently of the
current MIR opt level. The primary use-case is enabling MIR inlining on the
default MIR opt level.
Turn inlining thresholds into optional values to make it possible to configure
different defaults depending on the current mir-opt-level (although thresholds
are yet to be used in such a manner).
Cleanup `PpMode` and friends
This PR:
- Separates `PpSourceMode` and `PpHirMode` to remove invalid states
- Renames the variant to remove the redundant `Ppm` prefix
- Adds basic documentation for the different pretty-print modes
- Cleanups some code to make it more idiomatic
Not sure if this is actually useful, but it looks cleaner to me.
Set path of the compile unit to the source directory
As part of the effort to implement split dwarf debug info, we ended up
setting the compile unit location to the output directory rather than
the source directory. Furthermore, it seems like we failed to remap the
prefixes for this as well!
The desired behaviour is to instead set the `DW_AT_GNU_dwo_name` to a
path relative to compiler's working directory. This still allows
debuggers to find the split dwarf files, while not changing the
behaviour of the code that is compiling with regular debug info, and not
changing the compiler's behaviour with regards to reproducibility.
Fixes#82074
cc `@alexcrichton` `@davidtwco`
Make `treat_err_as_bug` Option<NonZeroUsize>
`rustc -Z treat-err-as-bug=N` already requires `N` to be nonzero when the argument is parsed, so changing the type from `Option<usize>` to `Option<NonZeroUsize>` is a low-hanging fruit in terms of layout optimization.
As part of the effort to implement split dwarf debug info, we ended up
setting the compile unit location to the output directory rather than
the source directory. Furthermore, it seems like we failed to remap the
prefixes for this as well!
The desired behaviour is to instead set the `DW_AT_GNU_dwo_name` to a
path relative to compiler's working directory. This still allows
debuggers to find the split dwarf files, while not changing the
behaviour of the code that is compiling with regular debug info, and not
changing the compiler's behaviour with regards to reproducibility.
Fixes#82074
This allows a build system to indicate a location in its own dependency
specification files (eg Cargo's `Cargo.toml`) which can be reported
along side any unused crate dependency.
This supports several types of location:
- 'json' - provide some json-structured data, which is included in the json diagnostics
in a `tool_metadata` field
- 'raw' - emit the provided string into the output. This also appears as a json string in
`tool_metadata`.
If no `--extern-location` is explicitly provided then a default json entry of the form
`"tool_metadata":{"name":<cratename>,"path":<cratepath>}` is emitted.
Fix rustc sysroot in systems using CAS
Change filesearch::get_or_default_sysroot() to check if sysroot is found using env::args().next() if rustc in argv[0] is a symlink; otherwise, or if it is not found, use env::current_exe() to imply sysroot. This makes the rustc binary able to locate Rust libraries in systems using content-addressable storage (CAS).
This allows to directly map from a DefPathHash to the crate it
originates from, without constructing side tables to do that mapping.
It also allows to reliably and cheaply check for DefPathHash collisions.
cfg(version): treat nightlies as complete
This PR makes cfg(version) treat the nightlies
for version 1.n.0 as 1.n.0, even though that nightly
version might not have all stabilizations and features
of the released 1.n.0. This is done for greater
convenience for people who want to test a newly
stabilized feature on nightly, or in other words,
give newly stabilized features as many eyeballs
as possible.
For users who wish to pin nightlies, this commit adds
a -Z assume-incomplete-release option that they can
enable if they run into any issues due to this change.
Implements the suggestion in https://github.com/rust-lang/rust/issues/64796#issuecomment-640851454
This commit makes cfg(version) treat the nightlies
for version 1.n.0 as 1.n.0, even though that nightly
version might not have all stabilizations and features
of the released 1.n.0. This is done for greater
convenience for people who want to test a newly
stabilized feature on nightly.
For users who wish to pin nightlies, this commit adds
a -Z assume-incomplete-release option that they can
enable if there are any issues due to this change.
rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
Change filesearch::get_or_default_sysroot() to check if sysroot is found
using env::args().next() if rustc in argv[0] is a symlink; otherwise, or
if it is not found, use env::current_exe() to imply sysroot. This makes
the rustc binary able to locate Rust libraries in systems using
content-addressable storage (CAS).
Enforce that query results implement Debug
Currently, we require that query keys implement `Debug`, but we do not do the same for query values. This can make incremental compilation bugs difficult to debug - there isn't a good place to print out the result loaded from disk.
This PR adds `Debug` bounds to several query-related functions, allowing us to debug-print the query value when an 'unstable fingerprint' error occurs. This required adding `#[derive(Debug)]` to a fairly large number of types - hopefully, this doesn't have much of an impact on compiler bootstrapping times.
MIR Inline is incompatible with coverage
Fixes: #80060
Fixed by disabling inlining if `-Zinstrument-coverage` is set.
The PR also adds additional use cases to the coverage test for doctests.
r? `@wesleywiser`
cc: `@tmandry`
Enable ASan, TSan, UBSan for aarch64-apple-darwin.
I confirmed ASan, TSan, UBSan all work for me locally with `clang` on my new Macbook Air.
~This requires https://github.com/rust-lang/llvm-project/pull/86~
llvm-dwp concatenates `DW_AT_comp_dir` with `DW_AT_GNU_dwo_name` (only
when `DW_AT_comp_dir` exists), which can result in it failing to find
the DWARF object files.
In earlier testing, `DW_AT_comp_dir` wasn't present in the final
object and the current directory was the output directory.
When running tests through compiletest, the working directory of the
compilation is different from output directory and that resulted in
`DW_AT_comp_dir` being in the object file (and set to the current
working directory, rather than the output directory), and
`DW_AT_GNU_dwo_name` being set to the full path (rather than just
the filename), so llvm-dwp was failing.
This commit changes the compilation directory provided to LLVM to match
the output directory, where DWARF objects are output; and ensures that
only the filename is used for `DW_AT_GNU_dwo_name`.
Signed-off-by: David Wood <david@davidtw.co>
This commit implements Split DWARF support, wiring up the flag (added in
earlier commits) to the modified FFI wrapper (also from earlier
commits).
Signed-off-by: David Wood <david@davidtw.co>
Fixes reported bugs in Rust Coverage
Fixes: #79569Fixes: #79566Fixes: #79565
For the first issue (#79569), I got hit a `debug_assert!()` before
encountering the reported error message (because I have `debug = true`
enabled in my config.toml).
The assertion showed me that some `SwitchInt`s can have more than one
target pointing to the same `BasicBlock`.
I had thought that was invalid, but since it seems to be possible, I'm
allowing this now.
I added a new test for this.
----
In the last two cases above, both tests (intentionally) fail to compile,
but the `InstrumentCoverage` pass is invoked anyway.
The MIR starts with an `Unreachable` `BasicBlock`, which I hadn't
encountered before. (I had assumed the `InstrumentCoverage` pass
would only be invoked with MIRs from successful compilations.)
I don't have test infrastructure set up to test coverage on files that
fail to compile, so I didn't add a new test.
r? `@tmandry`
FYI: `@wesleywiser`
Adds checks for:
* `no_core` attribute
* explicitly-enabled `legacy` symbol mangling
* mir_opt_level > 1 (which enables inlining)
I removed code from the `Inline` MIR pass that forcibly disabled
inlining if `-Zinstrument-coverage` was set. The default `mir_opt_level`
does not enable inlining anyway. But if the level is explicitly set and
is greater than 1, I issue a warning.
The new warnings show up in tests, which is much better for diagnosing
potential option conflicts in these cases.
