around a set of paths called `TestPaths`
This commit is not quite standalone; it basically contains all the
borrowing plumbing bits, the interesting stuff comes in the next commit.
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
This commit is the standard API stabilization commit for the 1.6 release cycle.
The list of issues and APIs below have all been through their cycle-long FCP and
the libs team decisions are listed below
Stabilized APIs
* `Read::read_exact`
* `ErrorKind::UnexpectedEof` (renamed from `UnexpectedEOF`)
* libcore -- this was a bit of a nuanced stabilization, the crate itself is now
marked as `#[stable]` and the methods appearing via traits for primitives like
`char` and `str` are now also marked as stable. Note that the extension traits
themeselves are marked as unstable as they're imported via the prelude. The
`try!` macro was also moved from the standard library into libcore to have the
same interface. Otherwise the functions all have copied stability from the
standard library now.
* The `#![no_std]` attribute
* `fs::DirBuilder`
* `fs::DirBuilder::new`
* `fs::DirBuilder::recursive`
* `fs::DirBuilder::create`
* `os::unix::fs::DirBuilderExt`
* `os::unix::fs::DirBuilderExt::mode`
* `vec::Drain`
* `vec::Vec::drain`
* `string::Drain`
* `string::String::drain`
* `vec_deque::Drain`
* `vec_deque::VecDeque::drain`
* `collections::hash_map::Drain`
* `collections::hash_map::HashMap::drain`
* `collections::hash_set::Drain`
* `collections::hash_set::HashSet::drain`
* `collections::binary_heap::Drain`
* `collections::binary_heap::BinaryHeap::drain`
* `Vec::extend_from_slice` (renamed from `push_all`)
* `Mutex::get_mut`
* `Mutex::into_inner`
* `RwLock::get_mut`
* `RwLock::into_inner`
* `Iterator::min_by_key` (renamed from `min_by`)
* `Iterator::max_by_key` (renamed from `max_by`)
Deprecated APIs
* `ErrorKind::UnexpectedEOF` (renamed to `UnexpectedEof`)
* `OsString::from_bytes`
* `OsStr::to_cstring`
* `OsStr::to_bytes`
* `fs::walk_dir` and `fs::WalkDir`
* `path::Components::peek`
* `slice::bytes::MutableByteVector`
* `slice::bytes::copy_memory`
* `Vec::push_all` (renamed to `extend_from_slice`)
* `Duration::span`
* `IpAddr`
* `SocketAddr::ip`
* `Read::tee`
* `io::Tee`
* `Write::broadcast`
* `io::Broadcast`
* `Iterator::min_by` (renamed to `min_by_key`)
* `Iterator::max_by` (renamed to `max_by_key`)
* `net::lookup_addr`
New APIs (still unstable)
* `<[T]>::sort_by_key` (added to mirror `min_by_key`)
Closes#27585Closes#27704Closes#27707Closes#27710Closes#27711Closes#27727Closes#27740Closes#27744Closes#27799Closes#27801
cc #27801 (doesn't close as `Chars` is still unstable)
Closes#28968
instead of this panic:
```
thread '<main>' panicked at 'index out of bounds: the len is 1 but the
index is 1', src/libcollections/vec.rs:1110
```
It still panics, just like `-h` does, so it should be okay in this
regard.
This commit stabilizes and deprecates library APIs whose FCP has closed in the
last cycle, specifically:
Stabilized APIs:
* `fs::canonicalize`
* `Path::{metadata, symlink_metadata, canonicalize, read_link, read_dir, exists,
is_file, is_dir}` - all moved to inherent methods from the `PathExt` trait.
* `Formatter::fill`
* `Formatter::width`
* `Formatter::precision`
* `Formatter::sign_plus`
* `Formatter::sign_minus`
* `Formatter::alternate`
* `Formatter::sign_aware_zero_pad`
* `string::ParseError`
* `Utf8Error::valid_up_to`
* `Iterator::{cmp, partial_cmp, eq, ne, lt, le, gt, ge}`
* `<[T]>::split_{first,last}{,_mut}`
* `Condvar::wait_timeout` - note that `wait_timeout_ms` is not yet deprecated
but will be once 1.5 is released.
* `str::{R,}MatchIndices`
* `str::{r,}match_indices`
* `char::from_u32_unchecked`
* `VecDeque::insert`
* `VecDeque::shrink_to_fit`
* `VecDeque::as_slices`
* `VecDeque::as_mut_slices`
* `VecDeque::swap_remove_front` - (renamed from `swap_front_remove`)
* `VecDeque::swap_remove_back` - (renamed from `swap_back_remove`)
* `Vec::resize`
* `str::slice_mut_unchecked`
* `FileTypeExt`
* `FileTypeExt::{is_block_device, is_char_device, is_fifo, is_socket}`
* `BinaryHeap::from` - `from_vec` deprecated in favor of this
* `BinaryHeap::into_vec` - plus a `Into` impl
* `BinaryHeap::into_sorted_vec`
Deprecated APIs
* `slice::ref_slice`
* `slice::mut_ref_slice`
* `iter::{range_inclusive, RangeInclusive}`
* `std::dynamic_lib`
Closes#27706Closes#27725
cc #27726 (align not stabilized yet)
Closes#27734Closes#27737Closes#27742Closes#27743Closes#27772Closes#27774Closes#27777Closes#27781
cc #27788 (a few remaining methods though)
Closes#27790Closes#27793Closes#27796Closes#27810
cc #28147 (not all parts stabilized)
instead of this panic:
```
thread '<main>' panicked at 'index out of bounds: the len is 1 but the
index is 1', src/libcollections/vec.rs:1110
```
It still panics, just like `-h` does, so it should be okay in this
regard.
Rust's current compilation model makes it impossible on Windows to generate one
object file with a complete and final set of dllexport annotations. This is
because when an object is generated the compiler doesn't actually know if it
will later be included in a dynamic library or not. The compiler works around
this today by flagging *everything* as dllexport, but this has the drawback of
exposing too much.
Thankfully there are alternate methods of specifying the exported surface area
of a dll on Windows, one of which is passing a `*.def` file to the linker which
lists all public symbols of the dynamic library. This commit removes all
locations that add `dllexport` to LLVM variables and instead dynamically
generates a `*.def` file which is passed to the linker. This file will include
all the public symbols of the current object file as well as all upstream
libraries, and the crucial aspect is that it's only used when generating a
dynamic library. When generating an executable this file isn't generated, so all
the symbols aren't exported from an executable.
To ensure that statically included native libraries are reexported correctly,
the previously added support for the `#[linked_from]` attribute is used to
determine the set of FFI symbols that are exported from a dynamic library, and
this is required to get the compiler to link correctly.
The current codegen tests only compare IR line counts between similar
rust and C programs, the latter getting compiled with clang. That looked
like a good idea back then, but actually things like lifetime intrinsics
mean that less IR isn't always better, so the metric isn't really
helpful.
Instead, we can start doing tests that check specific aspects of the
generated IR, like attributes or metadata. To do that, we can use LLVM's
FileCheck tool which has a number of useful features for such tests.
To start off, I created some tests for a few things that were recently
added and/or broken.
An automated script was run against the `.rs` and `.md` files,
subsituting every occurrence of `task` with `thread`. In the `.rs`
files, only the texts in the comment blocks were affected.
E.g. if `foo.rs` looks like
#![feature(test)]
extern crate test;
#[bench]
fn bar(b: &mut test::Bencher) {
b.iter(|| {
1
})
}
#[test]
fn baz() {}
#[bench]
fn qux(b: &mut test::Bencher) {
b.iter(|| {
panic!()
})
}
Then
$ rustc --test foo.rs
$ ./foo
running 3 tests
test baz ... ok
test qux ... FAILED
test bar ... ok
failures:
---- qux stdout ----
thread 'qux' panicked at 'explicit panic', bench.rs:17
failures:
qux
test result: FAILED. 2 passed; 1 failed; 0 ignored; 0 measured
$ ./foo --bench ba
running 2 tests
test baz ... ignored
test bar ... bench: 97 ns/iter (+/- 74)
test result: ok. 0 passed; 0 failed; 1 ignored; 1 measured
In particular, the two benchmark are being run as tests in the default
mode.
This helps for the main distribution, since benchmarks are only run with
`PLEASE_BENCH=1`, which is rarely set (and never set on the test bots),
and helps for code-coverage tools: benchmarks are run and so don't count
as dead code.
Fixes#15842.
This required fixing the `pretty-rpass-full` tests to have the same `$$(CSREQ$(1)_T_$(2)_H_$(3))` dependencies as the `rpass-full` and `cfail-full` tests. It also required fixing the `run-make/simd-ffi` test to use unique names for its output files.
The run-pass and pretty run-pass tests could run concurrently, and if they
do, they need to keep their output segregated.
This change might be overkill. We need the suffix for the `pretty` mode,
but we might not need it otherwise. The `debuginfo-lldb` and
`debuginfo-gdb` modes look like they could also need it, but the current
`tests.mk` file happens not to enable both lldb and gdb at the same time,
for incidental reasons.
PR #24242 added the ability to the compiler to directly give suggestions about
how to modify code to fix an error. The new errors look like this:
foobar.rs:5:12: 5:25 error: expected a path on the left-hand side of `+`,
not `&'static Copy` [E0178]
foobar.rs:5 let x: &'static Copy + 'static;
^~~~~~~~~~~~~
foobar.rs:5:12: 5:35 help: try adding parentheses (per RFC 438):
foobar.rs: let x: &'static (Copy + 'static);
foobar.rs:2:13: 2:23 error: cast to unsized type: `&_` as `core::marker::Copy`
foobar.rs:2 let x = &1 as Copy;
^~~~~~~~~~
foobar.rs:2:19: 2:23 help: try casting to a reference instead:
foobar.rs: let x = &1 as &Copy;
foobar.rs:7:24: 7:25 error: expected expression, found `;`
foobar.rs:7 let x = box (1 + 1);
^
foobar.rs:7:13: 7:16 help: try using `box()` instead:
foobar.rs: let x = box() (1 + 1);
This also modifies compiletest to give the ability to directly test suggestions
given by error messages.
