This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
This commit performs a pass over the implementations of the new `String` trait
in the formatting module. Some implementations were removed as a conservative
move pending an upcoming convention about `String` implementations, and some
were added in order to retain consistency across the libraries. Specifically:
* All "smart pointers" implement `String` now, adding missing implementations
for `Arc` and `Rc`.
* The `Vec<T>` and `[T]` types no longer implement `String`.
* The `*const T` and `*mut T` type no longer implement `String`.
* The `()` type no longer implements `String`.
* The `Path` type's `Show` implementation does not surround itself with `Path
{}` (a minor tweak).
All implementations of `String` in this PR were also marked `#[stable]` to
indicate that the types will continue to implement the `String` trait regardless
of what it looks like.
This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
This removes a large array of deprecated functionality, regardless of how
recently it was deprecated. The purpose of this commit is to clean out the
standard libraries and compiler for the upcoming alpha release.
Some notable compiler changes were to enable warnings for all now-deprecated
command line arguments (previously the deprecated versions were silently
accepted) as well as removing deriving(Zero) entirely (the trait was removed).
The distribution no longer contains the libtime or libregex_macros crates. Both
of these have been deprecated for some time and are available externally.
This patch marks `PartialEq`, `Eq`, `PartialOrd`, and `Ord` as
`#[stable]`, as well as the majorify of manual implementaitons of these
traits. The traits match the [reform
RFC](https://github.com/rust-lang/rfcs/pull/439).
Along the way, two changes are made:
* The recently-added type parameters for `Ord` and `Eq` are
removed. These were mistakenly added while adding them to `PartialOrd`
and `PartialEq`, but they don't make sense given the laws that are
required for (and use cases for) `Ord` and `Eq`.
* More explicit laws are added for `PartialEq` and `PartialOrd`,
connecting them to their associated mathematical concepts.
In the future, many of the impls should be generalized; see
since generalizing later is not a breaking change.
[breaking-change]
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `PtrMutExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::is_not_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `MutPtrExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
* `PtrExt::is_not_null` - use `!p.is_null()` instead.
This commit is a second pass stabilization for the `std::comm` module,
performing the following actions:
* The entire `std::comm` module was moved under `std::sync::mpsc`. This movement
reflects that channels are just yet another synchronization primitive, and
they don't necessarily deserve a special place outside of the other
concurrency primitives that the standard library offers.
* The `send` and `recv` methods have all been removed.
* The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`.
This means that all send/receive operations return a `Result` now indicating
whether the operation was successful or not.
* The error type of `send` is now a `SendError` to implement a custom error
message and allow for `unwrap()`. The error type contains an `into_inner`
method to extract the value.
* The error type of `recv` is now `RecvError` for the same reasons as `send`.
* The `TryRecvError` and `TrySendError` types have had public reexports removed
of their variants and the variant names have been tweaked with enum
namespacing rules.
* The `Messages` iterator is renamed to `Iter`
This functionality is now all `#[stable]`:
* `Sender`
* `SyncSender`
* `Receiver`
* `std::sync::mpsc`
* `channel`
* `sync_channel`
* `Iter`
* `Sender::send`
* `Sender::clone`
* `SyncSender::send`
* `SyncSender::try_send`
* `SyncSender::clone`
* `Receiver::recv`
* `Receiver::try_recv`
* `Receiver::iter`
* `SendError`
* `RecvError`
* `TrySendError::{mod, Full, Disconnected}`
* `TryRecvError::{mod, Empty, Disconnected}`
* `SendError::into_inner`
* `TrySendError::into_inner`
This is a breaking change due to the modification of where this module is
located, as well as the changing of the semantics of `send` and `recv`. Most
programs just need to rename imports of `std::comm` to `std::sync::mpsc` and
add calls to `unwrap` after a send or a receive operation.
[breaking-change]
All of the current std::sync primitives have poisoning enable which means that
when a task fails inside of a write-access lock then all future attempts to
acquire the lock will fail. This strategy ensures that stale data whose
invariants are possibly not upheld are never viewed by other tasks to help
propagate unexpected panics (bugs in a program) among tasks.
Currently there is no way to test whether a mutex or rwlock is poisoned. One
method would be to duplicate all the methods with a sister foo_catch function,
for example. This pattern is, however, against our [error guidelines][errors].
As a result, this commit exposes the fact that a task has failed internally
through the return value of a `Result`.
[errors]: https://github.com/rust-lang/rfcs/blob/master/text/0236-error-conventions.md#do-not-provide-both-result-and-fail-variants
All methods now return a `LockResult<T>` or a `TryLockResult<T>` which
communicates whether the lock was poisoned or not. In a `LockResult`, both the
`Ok` and `Err` variants contains the `MutexGuard<T>` that is being returned in
order to allow access to the data if poisoning is not desired. This also means
that the lock is *always* held upon returning from `.lock()`.
A new type, `PoisonError`, was added with one method `into_guard` which can
consume the assertion that a lock is poisoned to gain access to the underlying
data.
This is a breaking change because the signatures of these methods have changed,
often incompatible ways. One major difference is that the `wait` methods on a
condition variable now consume the guard and return it in as a `LockResult` to
indicate whether the lock was poisoned while waiting. Most code can be updated
by calling `.unwrap()` on the return value of `.lock()`.
[breaking-change]
This patch marks `clone` stable, as well as the `Clone` trait, but
leaves `clone_from` unstable. The latter will be decided by the beta.
The patch also marks most manual implementations of `Clone` as stable,
except where the APIs are otherwise deprecated or where there is
uncertainty about providing `Clone`.
r? @alexcrichton
This patch marks `clone` stable, as well as the `Clone` trait, but
leaves `clone_from` unstable. The latter will be decided by the beta.
The patch also marks most manual implementations of `Clone` as stable,
except where the APIs are otherwise deprecated or where there is
uncertainty about providing `Clone`.
This commit is part of a series that introduces a `std::thread` API to
replace `std::task`.
In the new API, `spawn` returns a `JoinGuard`, which by default will
join the spawned thread when dropped. It can also be used to join
explicitly at any time, returning the thread's result. Alternatively,
the spawned thread can be explicitly detached (so no join takes place).
As part of this change, Rust processes now terminate when the main
thread exits, even if other detached threads are still running, moving
Rust closer to standard threading models. This new behavior may break code
that was relying on the previously implicit join-all.
In addition to the above, the new thread API also offers some built-in
support for building blocking abstractions in user space; see the module
doc for details.
Closes#18000
[breaking-change]
This commit performs a second pass stabilization of the `std::default` module.
The module was already marked `#[stable]`, and the inheritance of `#[stable]`
was removed since this attribute was applied. This commit adds the `#[stable]`
attribute to the trait definition and one method name, along with all
implementations found in the standard distribution.
Now that we have an overloaded comparison (`==`) operator, and that `Vec`/`String` deref to `[T]`/`str` on method calls, many `as_slice()`/`as_mut_slice()`/`to_string()` calls have become redundant. This patch removes them. These were the most common patterns:
- `assert_eq(test_output.as_slice(), "ground truth")` -> `assert_eq(test_output, "ground truth")`
- `assert_eq(test_output, "ground truth".to_string())` -> `assert_eq(test_output, "ground truth")`
- `vec.as_mut_slice().sort()` -> `vec.sort()`
- `vec.as_slice().slice(from, to)` -> `vec.slice(from_to)`
---
Note that e.g. `a_string.push_str(b_string.as_slice())` has been left untouched in this PR, since we first need to settle down whether we want to favor the `&*b_string` or the `b_string[]` notation.
This is rebased on top of #19167
cc @alexcrichton @aturon
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::* and Result::*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
These functions allow you to see how many weak and strong references
there are to an `Arc`, `Rc`, or an `rc::Weak`. Due to the design of
`Arc` it is not possible to get the number of weak references of an
arbitrary `arc::Weak`. Look in `arc.rs` for a more in-depth explanation.
On `arc::Arc` and `arc::Weak` these operations are wait-free and atomic.
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
This adds impls of Eq/Ord/PartialEq/PartialOrd/Show/Default to Arc<T>, and it
also removes the `Send + Sync` bound on the `Clone` impl of Arc to make it more
deriving-friendly. The `Send + Sync` requirement is still enforce on
construction, of course!
compiletest: compact "linux" "macos" etc.as "unix".
liballoc: remove a superfluous "use".
libcollections: remove invocations of deprecated methods in favor of
their suggested replacements and use "_" for a loop counter.
libcoretest: remove invocations of deprecated methods; also add
"allow(deprecated)" for testing a deprecated method itself.
libglob: use "cfg_attr".
libgraphviz: add a test for one of data constructors.
libgreen: remove a superfluous "use".
libnum: "allow(type_overflow)" for type cast into u8 in a test code.
librustc: names of static variables should be in upper case.
libserialize: v[i] instead of get().
libstd/ascii: to_lowercase() instead of to_lower().
libstd/bitflags: modify AnotherSetOfFlags to use i8 as its backend.
It will serve better for testing various aspects of bitflags!.
libstd/collections: "allow(deprecated)" for testing a deprecated
method itself.
libstd/io: remove invocations of deprecated methods and superfluous "use".
Also add #[test] where it was missing.
libstd/num: introduce a helper function to effectively remove
invocations of a deprecated method.
libstd/path and rand: remove invocations of deprecated methods and
superfluous "use".
libstd/task and libsync/comm: "allow(deprecated)" for testing
a deprecated method itself.
libsync/deque: remove superfluous "unsafe".
libsync/mutex and once: names of static variables should be in upper case.
libterm: introduce a helper function to effectively remove
invocations of a deprecated method.
We still see a few warnings about using obsoleted native::task::spawn()
in the test modules for libsync. I'm not sure how I should replace them
with std::task::TaksBuilder and native::task::NativeTaskBuilder
(dependency to libstd?)
Signed-off-by: NODA, Kai <nodakai@gmail.com>
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
This commit applies stability attributes to the contents of these modules,
summarized here:
* The `unit` and `bool` modules have become #[unstable] as they are purely meant
for documentation purposes and are candidates for removal.
* The `ty` module has been deprecated, and the inner `Unsafe` type has been
renamed to `UnsafeCell` and moved to the `cell` module. The `marker1` field
has been removed as the compiler now always infers `UnsafeCell` to be
invariant. The `new` method i stable, but the `value` field, `get` and
`unwrap` methods are all unstable.
* The `tuple` module has its name as stable, the naming of the `TupleN` traits
as stable while the methods are all #[unstable]. The other impls in the module
have appropriate stability for the corresponding trait.
* The `arc` module has received the exact same treatment as the `rc` module
previously did.
* The `any` module has its name as stable. The `Any` trait is also stable, with
a new private supertrait which now contains the `get_type_id` method. This is
to make the method a private implementation detail rather than a public-facing
detail.
The two extension traits in the module are marked #[unstable] as they will not
be necessary with DST. The `is` method is #[stable], the as_{mut,ref} methods
have been renamed to downcast_{mut,ref} and are #[unstable].
The extension trait `BoxAny` has been clarified as to why it is unstable as it
will not be necessary with DST.
This is a breaking change because the `marker1` field was removed from the
`UnsafeCell` type. To deal with this change, you can simply delete the field and
only specify the value of the `data` field in static initializers.
[breaking-change]
Implement for Vec, DList, RingBuf. Add MutableSeq to the prelude.
Since the collections traits are in the prelude most consumers of
these methods will continue to work without change.
[breaking-change]
floating point numbers for real.
This will break code that looks like:
let mut x = 0;
while ... {
x += 1;
}
println!("{}", x);
Change that code to:
let mut x = 0i;
while ... {
x += 1;
}
println!("{}", x);
Closes#15201.
[breaking-change]
The following are tagged 'unstable'
- core::clone
- Clone
- Clone::clone
- impl Clone for Arc
- impl Clone for arc::Weak
- impl Clone for Rc
- impl Clone for rc::Weak
- impl Clone for Vec
- impl Clone for Cell
- impl Clone for RefCell
- impl Clone for small tuples
The following are tagged 'experimental'
- Clone::clone_from - may not provide enough utility
- impls for various extern "Rust" fns - may not handle lifetimes correctly
See https://github.com/rust-lang/rust/wiki/Meeting-API-review-2014-06-23#clone
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This patch makes `Arc::make_unique` examine the number of weak
references as well as strong references, which is required for safety.
It also adds a `make_unique` method to the `Rc` type for consistency.
Closes#14521.
Types that implement Deref can cause weird error messages due to their
private fields conflicting with a field of the type they deref to, e.g.,
previously
struct Foo { x: int }
let a: Arc<Foo> = ...;
println!("{}", a.x);
would complain the the `x` field of `Arc` was private (since Arc has a
private field called `x`) rather than just ignoring it.
This patch doesn't fix that issue, but does mean one would have to write
`a._ptr` to hit the same error message, which seems far less
common. (This patch `_`-prefixes all private fields of
`Deref`-implementing types.)
cc #12808
This commit is part of the libstd facade RFC, issue #13851. This creates a new
library, liballoc, which is intended to be the core allocation library for all
of Rust. It is pinned on the basic assumption that an allocation failure is an
abort or failure.
This module has inherited the heap/libc_heap modules from std::rt, the owned/rc
modules from std, and the arc module from libsync. These three pointers are
currently the three most core pointer implementations in Rust.
The UnsafeArc type in std::sync should be considered deprecated and replaced by
Arc<Unsafe<T>>. This commit does not currently migrate to this type, but future
commits will continue this refactoring.
