Optimize DST field access
For
struct X<T: ?Sized>(T)
struct Y<T: ?Sized>(u8, T)
the offset of the unsized field is
0
mem::align_of_val(&self.1)
respectively. This patch changes the expression used to compute these
offsets so that the optimizer can perform this optimization.
Consider
```rust
fn f(x: &X<dyn Any>) -> &dyn Any {
&x.0
}
```
Before:
```asm
test:
movq %rsi, %rdx
movq 16(%rsi), %rax
leaq -1(%rax), %rcx
negq %rax
andq %rcx, %rax
addq %rdi, %rax
retq
```
After:
```asm
test:
movq %rsi, %rdx
movq %rdi, %rax
retq
```
Update and improve `rustc_codegen_{llvm,ssa}` docs
Fixes#75342.
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
r? ``@pnkfelix`` maybe?
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
For
struct X<T: ?Sized>(T)
struct Y<T: ?Sized>(u8, T)
the offset of the unsized field is
0
mem::align_of_val(&self.1)
respectively. This patch changes the expression used to compute these
offsets so that the optimizer can perform this optimization.
Consider
```rust
fn test(x: &X<dyn Any>) -> &dyn Any {
&x.0
}
```
Before:
```asm
test:
movq %rsi, %rdx
movq 16(%rsi), %rax
leaq -1(%rax), %rcx
negq %rax
andq %rcx, %rax
addq %rdi, %rax
retq
```
After:
```asm
test:
movq %rsi, %rdx
movq %rdi, %rax
retq
```
Always run intrinsics lowering pass
Move intrinsics lowering pass from the optimization phase (where it
would not run if -Zmir-opt-level=0), to the drop lowering phase where it
runs unconditionally.
The implementation of those intrinsics in code generation and
interpreter is unnecessary. Remove it.
This commit adds a Split DWARF compare mode to compiletest so that
debuginfo tests are also tested using Split DWARF in split mode (and
manually in single mode).
Signed-off-by: David Wood <david@davidtw.co>
This commit implements Split DWARF support, wiring up the flag (added in
earlier commits) to the modified FFI wrapper (also from earlier
commits).
Signed-off-by: David Wood <david@davidtw.co>
This commit removes the `TargetMachineFactory` struct and adds a
`TargetMachineFactoryFn` type alias which is used everywhere that the
previous, long type was used.
Signed-off-by: David Wood <david@davidtw.co>
This commit changes some comments to documentation comments so that
they can be read on the generated rustdoc.
Signed-off-by: David Wood <david@davidtw.co>
[mir-opt] Allow debuginfo to be generated for a constant or a Place
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Move intrinsics lowering pass from the optimization phase (where it
would not run if -Zmir-opt-level=0), to the drop lowering phase where it
runs unconditionally.
The implementation of those intrinsics in code generation and
interpreter is unnecessary. Remove it.
rustc_codegen_ssa: use bitcasts instead of type punning for scalar transmutes.
This specifically helps with `f32` <-> `u32` (`from_bits`, `to_bits`) in Rust-GPU (`rustc_codegen_spirv`), where (AFAIK) we don't yet have enough infrastructure to turn type punning memory accesses into SSA bitcasts.
(There may be more instances, but the one I've seen myself is `f32::signum` from `num-traits` inspecting e.g. the sign bit)
Sadly I've had to make an exception for `transmute`s between pointers and non-pointers, as LLVM disallows using `bitcast` for them.
r? `@nagisa` cc `@khyperia`
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Fixes multiple issue with counters, with simplification
Includes a change to the implicit else span in ast_lowering, so coverage
of the implicit else no longer spans the `then` block.
Adds coverage for unused closures and async function bodies.
Fixes: #78542
Adding unreachable regions for known MIR missing from coverage map
Cleaned up PR commits, and removed link-dead-code requirement and tests
Coverage no longer depends on Issue #76038 (`-C link-dead-code` is
no longer needed or enforced, so MSVC can use the same tests as
Linux and MacOS now)
Restrict adding unreachable regions to covered files
Improved the code that adds coverage for uncalled functions (with MIR
but not-codegenned) to avoid generating coverage in files not already
included in the files with covered functions.
Resolved last known issue requiring --emit llvm-ir workaround
Fixed bugs in how unreachable code spans were added.
Warn if `dsymutil` returns an error code
This checks the error code returned by `dsymutil` and warns if it failed. It
also provides the stdout and stderr logs from `dsymutil`, similar to the native
linker step.
I tried to think of ways to test this change, but so far I haven't found a good way, as you'd likely need to inject some nonsensical args into `dsymutil` to induce failure, which feels too artificial to me. Also, https://github.com/rust-lang/rust/issues/79361 suggests Rust is on the verge of disabling `dsymutil` by default, so perhaps it's okay for this change to be untested. In any case, I'm happy to add a test if someone sees a good approach.
Fixes https://github.com/rust-lang/rust/issues/78770
Stop adding '*' at the end of slice and str typenames for MSVC case
When computing debug info for MSVC debuggers, Rust compiler emits C++ style type names for compatibility with .natvis visualizers. All Ref types are treated as equivalences of C++ pointers in this process, and, as a result, their type names end with a '\*'. Since Slice and Str are treated as Ref by the compiler, their type names also end with a '\*'. This causes the .natvis engine for WinDbg fails to display data of Slice and Str objects. We addressed this problem simply by removing the '*' at the end of type names for Slice and Str types.
Debug info in WinDbg before the fix:
Debug info in WinDbg after the fix:
This change has also been tested with debuggers for Visual Studio, VS Code C++ and VS Code LLDB to make sure that it does not affect the behavior of other kinds of debugger.
This checks the error code returned by `dsymutil` and warns if it failed. It
also provides the stdout and stderr logs from `dsymutil`, similar to the native
linker step.
Fixes https://github.com/rust-lang/rust/issues/78770
Properly handle attributes on statements
We now collect tokens for the underlying node wrapped by `StmtKind`
nstead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
