Along the way, we also implement a handful of diagnostics improvements
and fixes, particularly with respect to the special handling of `||` in
place of `|` and when there are leading verts in function params, which
don't allow top-level or-patterns anyway.
Fixes#81543
After we expand a macro, we try to parse the resulting tokens as a AST
node. This commit makes several improvements to how we handle spans when
an error occurs:
* Only ovewrite the original `Span` if it's a dummy span. This preserves
a more-specific span if one is available.
* Use `self.prev_token` instead of `self.token` when emitting an error
message after encountering EOF, since an EOF token always has a dummy
span
* Make `SourceMap::next_point` leave dummy spans unused. A dummy span
does not have a logical 'next point', since it's a zero-length span.
Re-using the span span preserves its 'dummy-ness' for other checks
Make `-Z time-passes` less noisy
- Add the module name to `pre_AST_expansion_passes` and don't make it a
verbose event (since it normally doesn't take very long, and it's
emitted many times)
- Don't make the following rustdoc events verbose; they're emitted many times.
+ build_extern_trait_impl
+ build_local_trait_impl
+ build_primitive_trait_impl
+ get_auto_trait_impls
+ get_blanket_trait_impls
- Remove the `get_auto_trait_and_blanket_synthetic_impls` rustdoc event; it's wholly
covered by get_{auto,blanket}_trait_impls and not very useful.
I found this while working on https://github.com/rust-lang/rust/pull/81275 but it's independent of those changes.
- Add the module name to `pre_AST_expansion_passes` and don't make it a
verbose event (since it normally doesn't take very long, and it's
emitted many times)
- Don't make the following rustdoc events verbose; they're emitted many times.
+ build_extern_trait_impl
+ build_local_trait_impl
+ build_primitive_trait_impl
+ get_auto_trait_impls
+ get_blanket_trait_impls
- Remove `get_auto_trait_and_blanket_synthetic_impls`; it's wholly
covered by get_{auto,blanket}_trait_impls and not very useful.
Fixes#81007
Previously, we would fail to collect tokens in the proper place when
only builtin attributes were present. As a result, we would end up with
attribute tokens in the collected `TokenStream`, leading to duplication
when we attempted to prepend the attributes from the AST node.
We now explicitly track when token collection must be performed due to
nomterminal parsing.
Fix some clippy lints
Happy to revert these if you think they're less readable, but personally I like them better now (especially the `else { if { ... } }` to `else if { ... }` change).
We now collect tokens for the underlying node wrapped by `StmtKind`
instead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
Do not collect tokens for doc comments
Doc comment is a single token and AST has all the information to re-create it precisely.
Doc comments are also responsible for majority of calls to `collect_tokens` (with `num_calls == 1` and `num_calls == 0`, cc https://github.com/rust-lang/rust/pull/78736).
(I also moved token collection into `fn parse_attribute` to deduplicate code a bit.)
r? `@Aaron1011`
rustc_ast: Do not panic by default when visiting macro calls
Panicking by default made sense when we didn't have HIR or MIR and everything worked on AST, but now all AST visitors run early and majority of them have to deal with macro calls, often by ignoring them.
The second commit renames `visit_mac` to `visit_mac_call`, the corresponding structures were renamed earlier in https://github.com/rust-lang/rust/pull/69589.
Split out statement attributes changes from #78306
This is the same as PR https://github.com/rust-lang/rust/pull/78306, but `unused_doc_comments` is modified to explicitly ignore statement items (which preserves the current behavior).
This shouldn't have any user-visible effects, so it can be landed without lang team discussion.
---------
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
When the 'early' and 'late' visitors visit an attribute target, they
activate any lint attributes (e.g. `#[allow]`) that apply to it.
This can affect warnings emitted on sibiling attributes. For example,
the following code does not produce an `unused_attributes` for
`#[inline]`, since the sibiling `#[allow(unused_attributes)]` suppressed
the warning.
```rust
trait Foo {
#[allow(unused_attributes)] #[inline] fn first();
#[inline] #[allow(unused_attributes)] fn second();
}
```
However, we do not do this for statements - instead, the lint attributes
only become active when we visit the struct nested inside `StmtKind`
(e.g. `Item`).
Currently, this is difficult to observe due to another issue - the
`HasAttrs` impl for `StmtKind` ignores attributes for `StmtKind::Item`.
As a result, the `unused_doc_comments` lint will never see attributes on
item statements.
This commit makes two interrelated fixes to the handling of inert
(non-proc-macro) attributes on statements:
* The `HasAttr` impl for `StmtKind` now returns attributes for
`StmtKind::Item`, treating it just like every other `StmtKind`
variant. The only place relying on the old behavior was macro
which has been updated to explicitly ignore attributes on item
statements. This allows the `unused_doc_comments` lint to fire for
item statements.
* The `early` and `late` lint visitors now activate lint attributes when
invoking the callback for `Stmt`. This ensures that a lint
attribute (e.g. `#[allow(unused_doc_comments)]`) can be applied to
sibiling attributes on an item statement.
For now, the `unused_doc_comments` lint is explicitly disabled on item
statements, which preserves the current behavior. The exact locatiosn
where this lint should fire are being discussed in PR #78306
This allows us to avoid synthesizing tokens in `prepend_attr`, since we
have the original tokens available.
We still need to synthesize tokens when expanding `cfg_attr`,
but this is an unavoidable consequence of the syntax of `cfg_attr` -
the user does not supply the `#` and `[]` tokens that a `cfg_attr`
expands to.
This approach lives exclusively in the parser, so struct expr bodies
that are syntactically correct on their own but are otherwise incorrect
will still emit confusing errors, like in the following case:
```rust
fn foo() -> Foo {
bar: Vec::new()
}
```
```
error[E0425]: cannot find value `bar` in this scope
--> src/file.rs:5:5
|
5 | bar: Vec::new()
| ^^^ expecting a type here because of type ascription
error[E0214]: parenthesized type parameters may only be used with a `Fn` trait
--> src/file.rs:5:15
|
5 | bar: Vec::new()
| ^^^^^ only `Fn` traits may use parentheses
error[E0107]: wrong number of type arguments: expected 1, found 0
--> src/file.rs:5:10
|
5 | bar: Vec::new()
| ^^^^^^^^^^ expected 1 type argument
```
If that field had a trailing comma, that would be a parse error and it
would trigger the new, more targetted, error:
```
error: struct literal body without path
--> file.rs:4:17
|
4 | fn foo() -> Foo {
| _________________^
5 | | bar: Vec::new(),
6 | | }
| |_^
|
help: you might have forgotten to add the struct literal inside the block
|
4 | fn foo() -> Foo { Path {
5 | bar: Vec::new(),
6 | } }
|
```
Partially address last part of #34255.
We currently only attach tokens when parsing a `:stmt` matcher for a
`macro_rules!` macro. Proc-macro attributes on statements are still
unstable, and need additional work.
Fixes#75050
Previously, we would unconditionally suppress the panic hook during
proc-macro execution. This commit adds a new flag
-Z proc-macro-backtrace, which allows running the panic hook for
easier debugging.
