This commit brings the local_data api up to modern rust standards with a few key
improvements:
* The `pop` and `set` methods have been combined into one method, `replace`
* The `get_mut` method has been removed. All interior mutability should be done
through `RefCell`.
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.replace()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
This is the last remaining networkig object to implement timeouts for. This
takes advantage of the CancelIo function and the already existing asynchronous
I/O functionality of pipes.
This commit implements the set{,_read,_write}_timeout() methods for the
libuv-based networking I/O objects. The implementation details are commented
thoroughly throughout the implementation.
This commit has an implementation of the previous commit's timeout interface for
I/O objects on unix platforms. For implementation details, see the large comment
at the end of libnative/io/net.rs which talks about the general strategy taken.
Thankfully, all of these implementations can share code because they're
performing all the same operations.
This commit does not implement timeouts for named pipes on windows, only tcp/udp
objects on windows (which are quite similar to their unix equivalents).
These timeouts all follow the same pattern as established by the timeouts on
acceptors. There are three methods: set_timeout, set_read_timeout, and
set_write_timeout. Each of these sets a point in the future after which
operations will time out.
Timeouts with cloned objects are a little trickier. Each object is viewed as
having its own timeout, unaffected by other objects' timeouts. Additionally,
timeouts do not propagate when a stream is cloned or when a cloned stream has
its timeouts modified.
This commit is just the public interface which will be exposed for timeouts, the
implementation will come in later commits.
Fix#13965.
This commit adopts the second strategy I outlined in #13965, where the bulk of the code is still "smoke tested" (in the sense that rustdoc attempts to run it, sending all of the generated output into a locally allocated `MemWriter`). The part of the code that is ignored (but included in the presentation) is isolated to a three-line `main` function that invokes the core rendering routine.
In the generated rustdoc output, this leads to a small break between the two code blocks, but I do not think this is a large issue.
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
Previously, the parser would not allow you to simultaneously implement a
function with a different abi as well as being unsafe at the same time. This
extends the parser to allow functions of the form:
unsafe extern fn foo() {
// ...
}
The closure type grammar was also changed to reflect this reversal, types
previously written as "extern unsafe fn()" must now be written as
"unsafe extern fn()". The parser currently has a hack which allows the old
style, but this will go away once a snapshot has landed.
Closes#10025
[breaking-change]
This pull request contains preparations for adding LLDB autotests:
+ the debuginfo tests are split into debuginfo-gdb and debuginfo-lldb
+ the `compiletest` tool is updated to support the debuginfo-lldb mode
+ tests.mk is modified to provide debuginfo-gdb and debuginfo-lldb make targets
+ GDB test cases are moved from `src/test/debug-info` to `src/test/debuginfo-gdb`
+ configure will now look for LLDB and set the appropriate CFG variables
+ the `lldb_batchmode.py` script is added to `src/etc`. It emulates GDB's batch mode
The LLDB autotests themselves are not part of this PR. Those will probable require some manual work on the test bots to make them work for the first time. Better to get these unproblematic preliminaries out of the way in a separate step.
This is the second step in implementing #13851. This PR cannot currently land until a snapshot exists with #13892, but I imagine that this review will take longer.
This PR refactors a large amount of functionality outside of the standard library into a new library, libcore. This new library has 0 dependencies (in theory). In practice, this library currently depends on these symbols being available:
* `rust_begin_unwind` and `rust_fail_bounds_check` - These are the two entry points of failure in libcore. The symbols are provided by libstd currently. In the future (see the bullets on #13851) this will be officially supported with nice error mesages. Additionally, there will only be one failure entry point once `std::fmt` migrates to libcore.
* `memcpy` - This is often generated by LLVM. This is also quite trivial to implement for any platform, so I'm not too worried about this.
* `memcmp` - This is required for comparing strings. This function is quite common *everywhere*, so I don't feel to bad about relying on a consumer of libcore to define it.
* `malloc` and `free` - This is quite unfortunate, and is a temporary stopgap until we deal with the `~` situation. More details can be found in the module `core::should_not_exist`
* `fmod` and `fmodf` - These exist because the `Rem` trait is defined in libcore, so the `Rem` implementation for floats must also be defined in libcore. I imagine that any platform using floating-point modulus will have these symbols anyway, and otherwise they will be optimized out.
* `fdim` and `fdimf` - Like `fmod`, these are from the `Signed` trait being defined in libcore. I don't expect this to be much of a problem
These dependencies all "Just Work" for now because libcore only exists as an rlib, not as a dylib.
The commits themselves are organized to show that the overall diff of this extraction is not all that large. Most modules were able to be moved with very few modifications. The primary module left out of this iteration is `std::fmt`. I plan on migrating the `fmt` module to libcore, but I chose to not do so at this time because it had implications on the `Writer` trait that I wanted to deal with in isolation. There are a few breaking changes in these commits, but they are fairly minor, and are all labeled with `[breaking-change]`.
The nastiest parts of this movement come up with `~[T]` and `~str` being language-defined types today. I believe that much of this nastiness will get better over time as we migrate towards `Vec<T>` and `Str` (or whatever the types will be named). There will likely always be some extension traits, but the situation won't be as bad as it is today.
Known deficiencies:
* rustdoc will get worse in terms of readability. This is the next issue I will tackle as part of #13851. If others think that the rustdoc change should happen first, I can also table this to fix rustdoc first.
* The compiler reveals that all these types are reexports via error messages like `core::option::Option`. This is filed as #13065, and I believe that issue would have a higher priority now. I do not currently plan on fixing that as part of #13851. If others believe that this issue should be fixed, I can also place it on the roadmap for #13851.
I recommend viewing these changes on a commit-by-commit basis. The overall change is likely too overwhelming to take in.
This mostly involved frobbing imports between realstd, realcore, and the core
being test. Some of the imports are a little counterintuitive, but it mainly
focuses around libcore's types not implementing Show while libstd's types
implement Show.
These implementations must live in libstd right now because the fmt module has
not been migrated yet. This will occur in a later PR.
Just to be clear, there are new extension traits, but they are not necessary
once the std::fmt module has migrated to libcore, which is a planned migration
in the future.
The prospects of a generic failure function such as this existing in libcore are
bleak, due to monomorphization not working across the crate boundary, and
allocation into a ~Any is not allowed in libcore.
The argument to expect() is now &str instead of <M: Send + Any>
[breaking-change]
This adds an small of failure to libcore, hamstrung by the fact that std::fmt
hasn't been migrated yet. A few asserts were re-worked to not use std::fmt
features, but these asserts can go back to their original form once std::fmt has
migrated.
The current failure implementation is to just have some symbols exposed by
std::rt::unwind that are linked against by libcore. This is an explicit circular
dependency, unfortunately. This will be officially supported in the future
through compiler support with much nicer failure messages. Additionally, there
are two depended-upon symbols today, but in the future there will only be one
(once std::fmt has migrated).
Coherence requires that libcore's traits be implemented in libcore for ~[T] and
~str (due to them being language defined types). These implementations cannot
live in libcore forever, but for now, until Heap/Box/Uniq is a lang item, these
implementations must reside inside of libcore. While not perfect
implementations, these shouldn't reside in libcore for too long.
With some form of lang item these implementations can be in a proper crate
because the lang item will not be present in libcore.
This moves as much allocation as possible from teh std::str module into
core::str. This includes essentially all non-allocating functionality, mostly
iterators and slicing and such.
This primarily splits the Str trait into only having the as_slice() method,
adding a new StrAllocating trait to std::str which contains the relevant new
allocation methods. This is a breaking change if any of the methods of "trait
Str" were overriden. The old functionality can be restored by implementing both
the Str and StrAllocating traits.
[breaking-change]
This commit adds a new trait, MutableVectorAllocating, which represents
functions on vectors which can allocate.
This is another extension trait to slices which should be removed once a lang
item exists for the ~ allocation.
This implements all traits inside of core::num for all the primitive types,
removing all the functionality from libstd. The std modules reexport all of the
necessary items from the core modules.
This strips out all string-related functionality from the num module. The
inherited functionality is all that will be implemented in libcore (for now).
Primarily, libcore will not implement the Float trait or any string-related
functionality.
It may be possible to migrate string parsing functionality into libcore in the
future, but for now it will remain in libstd.
All functionality in core::num is reexported in std::num.
This commit removes the std::{managed, reference} modules. The modules serve
essentially no purpose, and the only free function removed was `managed::ptr_eq`
which can be achieved by comparing references.
[breaking-change]
This removes the TotalOrd and TotalEq implementation macros, they will be added
later to the numeric modules (where the other comparison implementations live).
