Windows gets quite unhappy when a thread fails while the main thread is exiting,
frequently leading to process deadlock. This has been causing quite a few
deadlocks on the windows bots recently. The child threads are presumably failing
because the `println!` is failing due to the main thread being shut down.
Windows gets quite unhappy when a thread fails while the main thread is exiting,
frequently leading to process deadlock. This has been causing quite a few
deadlocks on the windows bots recently. The child threads are presumably failing
because the `println!` is failing due to the main thread being shut down.
Refactored code so that the drop-flag values for initialized
(`DTOR_NEEDED`) versus dropped (`DTOR_DONE`) are given explicit names.
Add `mem::dropped()` (which with `DTOR_DONE == 0` is semantically the
same as `mem::zeroed`, but the point is that it abstracts away from
the particular choice of value for `DTOR_DONE`).
Filling-drop needs to use something other than `ptr::read_and_zero`,
so I added such a function: `ptr::read_and_drop`. But, libraries
should not use it if they can otherwise avoid it.
Fixes to tests to accommodate filling-drop.
This is the kind of change that one is expected to need to make to
accommodate overloaded-`box`.
----
Note that this is not *all* of the changes necessary to accommodate
Issue 22181. It is merely the subset of those cases where there was
already a let-binding in place that made it easy to add the necesasry
type ascription.
(For unnamed intermediate `Box` values, one must go down a different
route; `Box::new` is the option that maximizes portability, but has
potential inefficiency depending on whether the call is inlined.)
----
There is one place worth note, `run-pass/coerce-match.rs`, where I
used an ugly form of `Box<_>` type ascription where I would have
preferred to use `Box::new` to accommodate overloaded-`box`. I
deliberately did not use `Box::new` here, because that is already done
in coerce-match-calls.rs.
----
Precursor for overloaded-`box` and placement-`in`; see Issue 22181.
This is an implementation of RFC 899 and adds stdio functionality to the new
`std::io` module. Details of the API can be found on the RFC, but from a high
level:
* `io::{stdin, stdout, stderr}` constructors are now available. There are also
`*_raw` variants for unbuffered and unlocked access.
* All handles are globally shared (excluding raw variants).
* The stderr handle is no longer buffered.
* All handles can be explicitly locked (excluding the raw variants).
The `print!` and `println!` machinery has not yet been hooked up to these
streams just yet. The `std::fmt::output` module has also not yet been
implemented as part of this commit.
Implements `Debug` for `RwLock` and `arc::Weak` in the same way it is implemented for `rc::Weak` (basically copy & paste).
The lack of this implementation prevents the automatic implementation of `Debug` for structs containing members of these types.
This commit stabilizes `std::borrow`, making the following modifications
to catch up the API with language changes:
* It renames `BorrowFrom` to `Borrow`, as was originally intended (but
blocked for technical reasons), and reorders the parameters
accordingly.
* It moves the type parameter of `ToOwned` to an associated type. This
is somewhat less flexible, in that each borrowed type must have a
unique owned type, but leads to a significant simplification for
`Cow`. Flexibility can be regained by using newtyped slices, which is
advisable for other reasons anyway.
* It removes the owned type parameter from `Cow`, making the type much
less verbose.
* Deprecates the `is_owned` and `is_borrowed` predicates in favor of
direct matching.
The above API changes are relatively minor; the basic functionality
remains the same, and essentially the whole module is now marked
`#[stable]`.
[breaking-change]
This commit is an implementation of [RFC 823][rfc] which is another pass over
the `std::hash` module for stabilization. The contents of the module were not
entirely marked stable, but some portions which remained quite similar to the
previous incarnation are now marked `#[stable]`. Specifically:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0823-hash-simplification.md
* `std::hash` is now stable (the name)
* `Hash` is now stable
* `Hash::hash` is now stable
* `Hasher` is now stable
* `SipHasher` is now stable
* `SipHasher::new` and `new_with_keys` are now stable
* `Hasher for SipHasher` is now stable
* Many `Hash` implementations are now stable
All other portions of the `hash` module remain `#[unstable]` as they are less
commonly used and were recently redesigned.
This commit is a breaking change due to the modifications to the `std::hash` API
and more details can be found on the [RFC][rfc].
Closes#22467
[breaking-change]
This commit performs a final stabilization pass over the std::fmt module,
marking all necessary APIs as stable. One of the more interesting aspects of
this module is that it exposes a good deal of its runtime representation to the
outside world in order for `format_args!` to be able to construct the format
strings. Instead of hacking the compiler to assume that these items are stable,
this commit instead lays out a story for the stabilization and evolution of
these APIs.
There are three primary details used by the `format_args!` macro:
1. `Arguments` - an opaque package of a "compiled format string". This structure
is passed around and the `write` function is the source of truth for
transforming a compiled format string into a string at runtime. This must be
able to be constructed in stable code.
2. `Argument` - an opaque structure representing an argument to a format string.
This is *almost* a trait object as it's just a pointer/function pair, but due
to the function originating from one of many traits, it's not actually a
trait object. Like `Arguments`, this must be constructed from stable code.
3. `fmt::rt` - this module contains the runtime type definitions primarily for
the `rt::Argument` structure. Whenever an argument is formatted with
nonstandard flags, a corresponding `rt::Argument` is generated describing how
the argument is being formatted. This can be used to construct an
`Arguments`.
The primary interface to `std::fmt` is the `Arguments` structure, and as such
this type name is stabilize as-is today. It is expected for libraries to pass
around an `Arguments` structure to represent a pending formatted computation.
The remaining portions are largely "cruft" which would rather not be stabilized,
but due to the stability checks they must be. As a result, almost all pieces
have been renamed to represent that they are "version 1" of the formatting
representation. The theory is that at a later date if we change the
representation of these types we can add new definitions called "version 2" and
corresponding constructors for `Arguments`.
One of the other remaining large questions about the fmt module were how the
pending I/O reform would affect the signatures of methods in the module. Due to
[RFC 526][rfc], however, the writers of fmt are now incompatible with the
writers of io, so this question has largely been solved. As a result the
interfaces are largely stabilized as-is today.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0526-fmt-text-writer.md
Specifically, the following changes were made:
* The contents of `fmt::rt` were all moved under `fmt::rt::v1`
* `fmt::rt` is stable
* `fmt::rt::v1` is stable
* `Error` is stable
* `Writer` is stable
* `Writer::write_str` is stable
* `Writer::write_fmt` is stable
* `Formatter` is stable
* `Argument` has been renamed to `ArgumentV1` and is stable
* `ArgumentV1::new` is stable
* `ArgumentV1::from_uint` is stable
* `Arguments::new_v1` is stable (renamed from `new`)
* `Arguments::new_v1_formatted` is stable (renamed from `with_placeholders`)
* All formatting traits are now stable, as well as the `fmt` method.
* `fmt::write` is stable
* `fmt::format` is stable
* `Formatter::pad_integral` is stable
* `Formatter::pad` is stable
* `Formatter::write_str` is stable
* `Formatter::write_fmt` is stable
* Some assorted top level items which were only used by `format_args!` were
removed in favor of static functions on `ArgumentV1` as well.
* The formatting-flag-accessing methods remain unstable
Within the contents of the `fmt::rt::v1` module, the following actions were
taken:
* Reexports of all enum variants were removed
* All prefixes on enum variants were removed
* A few miscellaneous enum variants were renamed
* Otherwise all structs, fields, and variants were marked stable.
In addition to these actions in the `std::fmt` module, many implementations of
`Show` and `String` were stabilized as well.
In some other modules:
* `ToString` is now stable
* `ToString::to_string` is now stable
* `Vec` no longer implements `fmt::Writer` (this has moved to `String`)
This is a breaking change due to all of the changes to the `fmt::rt` module, but
this likely will not have much impact on existing programs.
Closes#20661
[breaking-change]
This commit is an implementation of [RFC 565][rfc] which is a stabilization of
the `std::fmt` module and the implementations of various formatting traits.
Specifically, the following changes were performed:
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0565-show-string-guidelines.md
* The `Show` trait is now deprecated, it was renamed to `Debug`
* The `String` trait is now deprecated, it was renamed to `Display`
* Many `Debug` and `Display` implementations were audited in accordance with the
RFC and audited implementations now have the `#[stable]` attribute
* Integers and floats no longer print a suffix
* Smart pointers no longer print details that they are a smart pointer
* Paths with `Debug` are now quoted and escape characters
* The `unwrap` methods on `Result` now require `Display` instead of `Debug`
* The `Error` trait no longer has a `detail` method and now requires that
`Display` must be implemented. With the loss of `String`, this has moved into
libcore.
* `impl<E: Error> FromError<E> for Box<Error>` now exists
* `derive(Show)` has been renamed to `derive(Debug)`. This is not currently
warned about due to warnings being emitted on stage1+
While backwards compatibility is attempted to be maintained with a blanket
implementation of `Display` for the old `String` trait (and the same for
`Show`/`Debug`) this is still a breaking change due to primitives no longer
implementing `String` as well as modifications such as `unwrap` and the `Error`
trait. Most code is fairly straightforward to update with a rename or tweaks of
method calls.
[breaking-change]
Closes#21436
This gets rid of the 'experimental' level, removes the non-staged_api
case (i.e. stability levels for out-of-tree crates), and lets the
staged_api attributes use 'unstable' and 'deprecated' lints.
This makes the transition period to the full feature staging design
a bit nicer.
This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
This commit performs a pass over the implementations of the new `String` trait
in the formatting module. Some implementations were removed as a conservative
move pending an upcoming convention about `String` implementations, and some
were added in order to retain consistency across the libraries. Specifically:
* All "smart pointers" implement `String` now, adding missing implementations
for `Arc` and `Rc`.
* The `Vec<T>` and `[T]` types no longer implement `String`.
* The `*const T` and `*mut T` type no longer implement `String`.
* The `()` type no longer implements `String`.
* The `Path` type's `Show` implementation does not surround itself with `Path
{}` (a minor tweak).
All implementations of `String` in this PR were also marked `#[stable]` to
indicate that the types will continue to implement the `String` trait regardless
of what it looks like.
This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
