`-Z location-detail`: provide option to disable all location details
As reported [here](https://github.com/rust-lang/rust/pull/89920#issuecomment-1190598924), when I first implemented the `-Z location-detail` flag there was a bug, where passing an empty list was not correctly supported, and instead rejected by the compiler. This PR fixes that such that passing an empty list results in no location details being tracked, as originally specified in https://github.com/rust-lang/rfcs/pull/2091 .
This PR also adds a test case to verify that this option continues to work as intended.
Remove implicit names and values from `--cfg` in `--check-cfg`
This PR remove the implicit names and values from `--cfg` in `--check-cfg` because the behavior is quite surprising but also because it's really easy to inadvertently really on the implicitness and when the `--cfg` is not set anymore to have an unexpected warning from an unexpected condition that pass with the implicitness.
This change in behavior will also enable us to warn when an unexpected `--cfg` is passed, ex: the user wrote `--cfg=unstabl` instead of `--cfg=unstable`. The implementation of the warning will be done in a follow-up PR.
cc `@petrochenkov`
proc_macro: use crossbeam channels for the proc_macro cross-thread bridge
This is done by having the crossbeam dependency inserted into the `proc_macro` server code from the server side, to avoid adding a dependency to `proc_macro`.
In addition, this introduces a -Z command-line option which will switch rustc to run proc-macros using this cross-thread executor. With the changes to the bridge in #98186, #98187, #98188 and #98189, the performance of the executor should be much closer to same-thread execution.
In local testing, the crossbeam executor was substantially more performant than either of the two existing `CrossThread` strategies, so they have been removed to keep things simple.
r? `@eddyb`
This is done by having the crossbeam dependency inserted into the
proc_macro server code from the server side, to avoid adding a
dependency to proc_macro.
In addition, this introduces a -Z command-line option which will switch
rustc to run proc-macros using this cross-thread executor. With the
changes to the bridge in #98186, #98187, #98188 and #98189, the
performance of the executor should be much closer to same-thread
execution.
In local testing, the crossbeam executor was substantially more
performant than either of the two existing CrossThread strategies, so
they have been removed to keep things simple.
Prior to this fix, `-Z location-detail` provided no mechanism for
disabling all location details. This commit also adds a test case
to verify that this option continues to work as intended, and
clarifies the documentation of this option.
Some command-line options accessible through `sess.opts` are best
accessed through wrapper functions on `Session`, `TyCtxt` or otherwise,
rather than through field access on the option struct in the `Session`.
Adds a new lint which triggers on those options that should be accessed
through a wrapper function so that this is prohibited. Options are
annotated with a new attribute `rustc_lint_opt_deny_field_access` which
can specify the error message (i.e. "use this other function instead")
to be emitted.
A simpler alternative would be to simply rename the options in the
option type so that it is clear they should not be used, however this
doesn't prevent uses, just discourages them. Another alternative would
be to make the option fields private, and adding accessor functions on
the option types, however the wrapper functions sometimes rely on
additional state from `Session` or `TyCtxt` which wouldn't be available
in an function on the option type, so the accessor would simply make the
field available and its use would be discouraged too.
Signed-off-by: David Wood <david.wood@huawei.com>
If an internal lint uses `typeck_results` or similar queries then that
can result in rustdoc checking code that it shouldn't (e.g. from other
platforms) and emit compilation errors.
Signed-off-by: David Wood <david.wood@huawei.com>
Add support for LLVM ShadowCallStack.
LLVMs ShadowCallStack provides backward edge control flow integrity protection by using a separate shadow stack to store and retrieve a function's return address.
LLVM currently only supports this for AArch64 targets. The x18 register is used to hold the pointer to the shadow stack, and therefore this only works on ABIs which reserve x18. Further details are available in the [LLVM ShadowCallStack](https://clang.llvm.org/docs/ShadowCallStack.html) docs.
# Usage
`-Zsanitizer=shadow-call-stack`
# Comments/Caveats
* Currently only enabled for the aarch64-linux-android target
* Requires the platform to define a runtime to initialize the shadow stack, see the [LLVM docs](https://clang.llvm.org/docs/ShadowCallStack.html) for more detail.
Allow to disable thinLTO buffer to support lto-embed-bitcode lld feature
Hello
This change is to fix issue (https://github.com/rust-lang/rust/issues/84395) in which passing "-lto-embed-bitcode=optimized" to lld when linking rust code via linker-plugin-lto doesn't produce the expected result.
Instead of emitting a single unified module into a llvmbc section of the linked elf, it emits multiple submodules.
This is caused because rustc emits the BC modules after running llvm `createWriteThinLTOBitcodePass` pass.
Which in turn triggers a thinLTO linkage and causes the said issue.
This patch allows via compiler flag (-Cemit-thin-lto=<bool>) to select between running `createWriteThinLTOBitcodePass` and `createBitcodeWriterPass`.
Note this pattern of selecting between those 2 passes is common inside of LLVM code.
The default is to match the old behavior.
Adding the option to control from rustc CLI
if the resulted ".o" bitcode module files are with
thinLTO info or regular LTO info.
Allows using "-lto-embed-bitcode=optimized" during linkage
correctly.
Signed-off-by: Ziv Dunkelman <ziv.dunkelman@nextsilicon.com>
Keep unstable target features for asm feature checking
Inline assembly uses the target features to determine which registers
are available on the current target. However it needs to be able to
access unstable target features for this.
Fixes#99071
Inline assembly uses the target features to determine which registers
are available on the current target. However it needs to be able to
access unstable target features for this.
Fixes#99071
DWARF version 5 brings a number of improvements over version 4. Quoting from
the announcement [1]:
> Version 5 incorporates improvements in many areas: better data compression,
> separation of debugging data from executable files, improved description of
> macros and source files, faster searching for symbols, improved debugging
> optimized code, as well as numerous improvements in functionality and
> performance.
On platforms where DWARF version 5 is supported (Linux, primarily), this commit
adds support for it behind a new `-Z dwarf-version=5` flag.
[1]: https://dwarfstd.org/Public_Review.php
Migrate some diagnostics from `rustc_const_eval` to `SessionDiagnostic`
I'm still trying to get the hang of this, so it doesn't migrate _all_ of `rustc_const_eval`. Working on that later.
r? `@davidtwco`
Add a `-Zdump-drop-tracking-cfg` debugging flag
This is useful for debugging drop-tracking; previously, you had to recompile
rustc from source and manually add a call to `write_graph_to_file`. This
makes the option more discoverable and configurable at runtime.
I also took the liberty of making the labels for the CFG nodes much easier to read:
previously, they looked like `id(2), local_id: 48`, now they look like
```
expr from_config (hir_id=HirId { owner: DefId(0:10 ~ default_struct_update[79f9]::foo), local_id: 2})
```
r? ``@eholk``
Rename the `--output-width` flag to `--diagnostic-width` as this appears
to be the preferred name within the compiler team.
Signed-off-by: David Wood <david.wood@huawei.com>
Rename the `--terminal-width` flag to `--output-width` as the behaviour
doesn't just apply to terminals (and so is slightly less accurate).
Signed-off-by: David Wood <david.wood@huawei.com>
Formerly `-Zterminal-width`, `--terminal-width` allows the user or build
tool to inform rustc of the width of the terminal so that diagnostics
can be truncated.
Signed-off-by: David Wood <david.wood@huawei.com>
The `rustc_lint_diagnostics` attribute is used by the diagnostic
translation/struct migration lints to identify calls where
non-translatable diagnostics or diagnostics outwith impls are being
created. Any function used in creating a diagnostic should be annotated
with this attribute so this commit adds the attribute to many more
functions.
Signed-off-by: David Wood <david.wood@huawei.com>
This is useful for debugging drop-tracking; previously, you had to recompile
rustc from source and manually add a call to `write_graph_to_file`. This
makes the option more discoverable and configurable at runtime.
I also took the liberty of making the labels for the CFG nodes much easier to read:
previously, they looked like `id(2), local_id: 48`, now they look like
```
expr from_config (hir_id=HirId { owner: DefId(0:10 ~ default_struct_update[79f9]::foo), local_id: 2})
```
Support lint expectations for `--force-warn` lints (RFC 2383)
Rustc has a `--force-warn` flag, which overrides lint level attributes and forces the diagnostics to always be warn. This means, that for lint expectations, the diagnostic can't be suppressed as usual. This also means that the expectation would not be fulfilled, even if a lint had been triggered in the expected scope.
This PR now also tracks the expectation ID in the `ForceWarn` level. I've also made some minor adjustments, to possibly catch more bugs and make the whole implementation more robust.
This will probably conflict with https://github.com/rust-lang/rust/pull/97718. That PR should ideally be reviewed and merged first. The conflict itself will be trivial to fix.
---
r? `@wesleywiser`
cc: `@flip1995` since you've helped with the initial review and also discussed this topic with me. 🙃
Follow-up of: https://github.com/rust-lang/rust/pull/87835
Issue: https://github.com/rust-lang/rust/issues/85549
Yeah, and that's it.
Integrate measureme's hardware performance counter support.
*Note: this is a companion to https://github.com/rust-lang/measureme/pull/143, and duplicates some information with it for convenience*
**(much later) EDIT**: take any numbers with a grain of salt, they may have changed since initial PR open.
## Credits
I'd like to start by thanking `@alyssais,` `@cuviper,` `@edef1c,` `@glandium,` `@jix,` `@Mark-Simulacrum,` `@m-ou-se,` `@mystor,` `@nagisa,` `@puckipedia,` and `@yorickvP,` for all of their help with testing, and valuable insight and suggestions.
Getting here wouldn't have been possible without you!
(If I've forgotten anyone please let me know, I'm going off memory here, plus some discussion logs)
## Summary
This PR adds support to `-Z self-profile` for counting hardware events such as "instructions retired" (as opposed to being limited to time measurements), using the `rdpmc` instruction on `x86_64` Linux.
While other OSes may eventually be supported, preliminary research suggests some kind of kernel extension/driver is required to enable this, whereas on Linux any user can profile (at least) their own threads.
Supporting Linux on architectures other than x86_64 should be much easier (provided the hardware supports such performance counters), and was mostly not done due to a lack of readily available test hardware.
That said, 32-bit `x86` (aka `i686`) would be almost trivial to add and test once we land the initial `x86_64` version (as all the CPU detection code can be reused).
A new flag `-Z self-profile-counter` was added, to control which of the named `measureme` counters is used, and which defaults to `wall-time`, in order to keep `-Z self-profile`'s current functionality unchanged (at least for now).
The named counters so far are:
* `wall-time`: the existing time measurement
* name chosen for consistency with `perf.rust-lang.org`
* continues to use `std::time::Instant` for a nanosecond-precision "monotonic clock"
* `instructions:u`: the hardware performance counter usually referred to as "Instructions retired"
* here "retired" (roughly) means "fully executed"
* the `:u` suffix is from the Linux `perf` tool and indicates the counter only runs while userspace code is executing, and therefore counts no kernel instructions
* *see [Caveats/Subtracting IRQs](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Subtracting-IRQs) for why this isn't entirely true and why `instructions-minus-irqs:u` should be preferred instead*
* `instructions-minus-irqs:u`: same as `instructions:u`, except the count of hardware interrupts ("IRQs" here for brevity) is subtracted
* *see [Caveats/Subtracting IRQs](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Subtracting-IRQs) for why this should be preferred over `instructions:u`*
* `instructions-minus-r0420:u`: experimental counter, same as `instructions-minus-irqs:u` but subtracting an undocumented counter (`r0420:u`) instead of IRQs
* the `rXXXX` notation is again from Linux `perf`, and indicates a "raw" counter, with a hex representation of the low-level counter configuration - this was picked because we still don't *really* know what it is
* this only exists for (future) testing and isn't included/used in any comparisons/data we've put together so far
* *see [Challenges/Zen's undocumented 420 counter](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Epilogue-Zen’s-undocumented-420-counter) for details on how this counter was found and what it does*
---
There are also some additional commits:
* ~~see [Challenges/Rebasing *shouldn't* affect the results, right?](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Rebasing-*shouldn’t*-affect-the-results,-right) for details on the changes to `rustc_parse` and `rustc_trait_section` (the latter far more dubious, and probably shouldn't be merged, or not as-is)~~
* **EDIT**: the effects of these are no long quantifiable, the PR includes reverts for them
* ~~see [Challenges/`jemalloc`: purging will commence in ten seconds](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#jemalloc-purging-will-commence-in-ten-seconds) for details on the `jemalloc` change~~
* this is also separately found in #77162, and we probably want to avoid doing it by default, ideally we'd use the runtime control API `jemalloc` offers (assuming that can stop the timer that's already running, which I'm not sure about)
* **EDIT**: until we can do this based on `-Z` flags, this commit has also been reverted
* the `proc_macro` change was to avoid randomized hashing and therefore ASLR-like effects
---
**(much later) EDIT**: take any numbers with a grain of salt, they may have changed since initial PR open.
#### Write-up / report
Because of how extensive the full report ended up being, I've kept most of it [on `hackmd.io`](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view), but for convenient access, here are all the sections (with individual links):
<sup>(someone suggested I'd make a backup, so [here it is on the wayback machine](http://web.archive.org/web/20201127164748/https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view) - I'll need to remember to update that if I have to edit the write-up)</sup>
* [**Motivation**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Motivation)
* [**Results**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Results)
* [**Overhead**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Overhead)
*Preview (see the report itself for more details):*
|Counter|Total<br>`instructions-minus-irqs:u`|Overhead from "Baseline"<br>(for all 1903881<br>counter reads)|Overhead from "Baseline"<br>(per each counter read)|
|-|-|-|-|
|Baseline|63637621286 ±6||
|`instructions:u`|63658815885 ±2| +21194599 ±8| +11|
|`instructions-minus-irqs:u`|63680307361 ±13| +42686075 ±19| +22|
|`wall-time`|63951958376 ±10275|+314337090 ±10281|+165|
* [**"Macro" noise (self time)**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#“Macro”-noise-(self-time))
*Preview (see the report itself for more details):*
|| `wall-time` (ns) | `instructions:u` | `instructions-minus-irqs:u`
-: | -: | -: | -:
`typeck` | 5478261360 ±283933373 (±~5.2%) | 17350144522 ±6392 (±~0.00004%) | 17351035832.5 ±4.5 (±~0.00000003%)
`expand_crate` | 2342096719 ±110465856 (±~4.7%) | 8263777916 ±2937 (±~0.00004%) | 8263708389 ±0 (±~0%)
`mir_borrowck` | 2216149671 ±119458444 (±~5.4%) | 8340920100 ±2794 (±~0.00003%) | 8341613983.5 ±2.5 (±~0.00000003%)
`mir_built` | 1269059734 ±91514604 (±~7.2%) | 4454959122 ±1618 (±~0.00004%) | 4455303811 ±1 (±~0.00000002%)
`resolve_crate` | 942154987.5 ±53068423.5 (±~5.6%) | 3951197709 ±39 (±~0.000001%) | 3951196865 ±0 (±~0%)
* [**"Micro" noise (individual sampling intervals)**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#“Micro”-noise-(individual-sampling-intervals))
* [**Caveats**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Caveats)
* [**Disabling ASLR**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Disabling-ASLR)
* [**Non-deterministic proc macros**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Non-deterministic-proc-macros)
* [**Subtracting IRQs**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Subtracting-IRQs)
* [**Lack of support for multiple threads**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Lack-of-support-for-multiple-threads)
* [**Challenges**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Challenges)
* [**How do we even read hardware performance counters?**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#How-do-we-even-read-hardware-performance-counters)
* [**ASLR: it's free entropy**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#ASLR-it’s-free-entropy)
* [**The serializing instruction**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#The-serializing-instruction)
* [**Getting constantly interrupted**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Getting-constantly-interrupted)
* [**AMD patented time-travel and dubbed it `SpecLockMap`<br><sup> or: "how we accidentally unlocked `rr` on AMD Zen"</sup>**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#AMD-patented-time-travel-and-dubbed-it-SpecLockMapnbspnbspnbspnbspnbspnbspnbspnbspor-“how-we-accidentally-unlocked-rr-on-AMD-Zen”)
* [**`jemalloc`: purging will commence in ten seconds**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#jemalloc-purging-will-commence-in-ten-seconds)
* [**Rebasing *shouldn't* affect the results, right?**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Rebasing-*shouldn’t*-affect-the-results,-right)
* [**Epilogue: Zen's undocumented 420 counter**](https://hackmd.io/sH315lO2RuicY-SEt7ynGA?view#Epilogue-Zen’s-undocumented-420-counter)
Adds the virtual-function-elimination unstable compiler flag and a check
that this flag is only used in combination with -Clto. LLVM can only
apply this optimization with fat LTO.
lint: add diagnostic translation migration lints
Introduce allow-by-default lints for checking whether diagnostics are written in
`SessionDiagnostic` or `AddSubdiagnostic` impls and whether diagnostics are translatable. These lints can be denied for modules once they are fully migrated to impls and translation.
These lints are intended to be temporary - once all diagnostics have been changed then we can just change the APIs we have and that will enforce these constraints thereafter.
r? `````@oli-obk`````
Fix#71363's test by adding `-Z translate-remapped-path-to-local-path=no`
The test relies on `library/std/src/error.rs` not corresponding to a local path, but remapping might still find the related local file of a remapped path. To fix the test, this PR adds a new `-Z` flag to disable finding the corresponding local path of a remapped path.
