Move lint level source explanation to the bottom
So, uhhhhh
r? `@estebank`
## User-facing change
"note: `#[warn(...)]` on by default" and such are moved to the bottom of the diagnostic:
```diff
- = note: `#[warn(unsupported_calling_conventions)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #87678 <https://github.com/rust-lang/rust/issues/87678>
+ = note: `#[warn(unsupported_calling_conventions)]` on by default
```
Why warning is enabled is the least important thing, so it shouldn't be the first note the user reads, IMO.
## Developer-facing change
`struct_span_lint` and similar methods have a different signature.
Before: `..., impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>)`
After: `..., impl Into<DiagnosticMessage>, impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>`
The reason for this is that `struct_span_lint` needs to edit the diagnostic _after_ `decorate` closure is called. This also makes lint code a little bit nicer in my opinion.
Another option is to use `impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>) -> DiagnosticBuilder<'a, ()>` altough I don't _really_ see reasons to do `let lint = lint.build(message)` everywhere.
## Subtle problem
By moving the message outside of the closure (that may not be called if the lint is disabled) `format!(...)` is executed earlier, possibly formatting `Ty` which may call a query that trims paths that crashes the compiler if there were no warnings...
I don't think it's that big of a deal, considering that we move from `format!(...)` to `fluent` (which is lazy by-default) anyway, however this required adding a workaround which is unfortunate.
## P.S.
I'm sorry, I do not how to make this PR smaller/easier to review. Changes to the lint API affect SO MUCH 😢
`Res::SelfTy` currently has two `Option`s. When the second one is `Some`
the first one is never consulted. So we can split it into two variants,
`Res::SelfTyParam` and `Res::SelfTyAlias`, reducing the size of `Res`
from 24 bytes to 12. This then shrinks `hir::Path` and
`hir::PathSegment`, which are the HIR types that take up the most space.
Stabilize const `BTree{Map,Set}::new`
The FCP was completed in #71835.
Since `len` and `is_empty` are not const stable yet, this also creates a new feature for them since they previously used the same `const_btree_new` feature.
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
Since clippy can use a projects MSRV for its lints, it might not want
to consider functions as const stable if they have been added lately.
Functions that have been stabilized this version use
CURRENT_RUSTC_VERSION as their version, which gets then turned into the
current version, which might be something like `1.66.0-dev`. The version
parser cannot deal with this version, so it has to be stripped off.
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
This shrinks `hir::Ty` from 72 to 48 bytes.
`visit_lifetime` is added to the HIR stats collector because these types
are now stored in memory on their own, instead of being within other
types.
`BindingAnnotation` refactor
* `ast::BindingMode` is deleted and replaced with `hir::BindingAnnotation` (which is moved to `ast`)
* `BindingAnnotation` is changed from an enum to a tuple struct e.g. `BindingAnnotation(ByRef::No, Mutability::Mut)`
* Associated constants added for convenience `BindingAnnotation::{NONE, REF, MUT, REF_MUT}`
One goal is to make it more clear that `BindingAnnotation` merely represents syntax `ref mut` and not the actual binding mode. This was especially confusing since we had `ast::BindingMode`->`hir::BindingAnnotation`->`thir::BindingMode`.
I wish there were more symmetry between `ByRef` and `Mutability` (variant) naming (maybe `Mutable::Yes`?), and I also don't love how long the name `BindingAnnotation` is, but this seems like the best compromise. Ideas welcome.
From 72 bytes to 12 bytes (on x86-64).
There are two parts to this:
- Changing various source code offsets from 64-bit to 32-bit. This is
not a problem because the rest of rustc also uses 32-bit source code
offsets. This means `Token` is no longer `Copy` but this causes no
problems.
- Removing the `RawStrError` from `LiteralKind`. Raw string literal
invalidity is now indicated by a `None` value within
`RawStr`/`RawByteStr`, and the new `validate_raw_str` function can be
used to re-lex an invalid raw string literal to get the `RawStrError`.
There is one very small change in behaviour. Previously, if a raw string
literal matched both the `InvalidStarter` and `TooManyHashes` cases,
the latter would override the former. This has now changed, because
`raw_double_quoted_string` now uses `?` and so returns immediately upon
detecting the `InvalidStarter` case. I think this is a slight
improvement to report the earlier-detected error, and it explains the
change in the `test_too_many_hashes` test.
The commit also removes a couple of comments that refer to #77629 and
say that the size of these types don't affect performance. These
comments are wrong, though the performance effect is small.
Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
once cell renamings
This PR does the renamings proposed in https://github.com/rust-lang/rust/issues/74465#issuecomment-1153703128
- Move/rename `lazy::{OnceCell, Lazy}` to `cell::{OnceCell, LazyCell}`
- Move/rename `lazy::{SyncOnceCell, SyncLazy}` to `sync::{OnceLock, LazyLock}`
(I used `Lazy...` instead of `...Lazy` as it seems to be more consistent, easier to pronounce, etc)
```@rustbot``` label +T-libs-api -T-libs
Make `ExprKind::Closure` a struct variant.
Simple refactor since we both need it to introduce additional fields in `ExprKind::Closure`.
r? ``@Aaron1011``
And likewise for the `Const::val` method.
Because its type is called `ConstKind`. Also `val` is a confusing name
because `ConstKind` is an enum with seven variants, one of which is
called `Value`. Also, this gives consistency with `TyS` and `PredicateS`
which have `kind` fields.
The commit also renames a few `Const` variables from `val` to `c`, to
avoid confusion with the `ConstKind::Value` variant.
Compute `is_late_bound_map` query separately from lifetime resolution
This query is actually very simple, and is only useful for functions and method. It can be computed directly by fetching the HIR, with no need to embed it within the lifetime resolution visitor.
Based on https://github.com/rust-lang/rust/pull/96296
Lazify `SourceFile::lines`.
`SourceFile::lines` is a big part of metadata. It's stored in a compressed form
(a difference list) to save disk space. Decoding it is a big fraction of
compile time for very small crates/programs.
This commit introduces a new type `SourceFileLines` which has a `Lines`
form and a `Diffs` form. The latter is used when the metadata is first
read, and it is only decoded into the `Lines` form when line data is
actually needed. This avoids the decoding cost for many files,
especially in `std`. It's a performance win of up to 15% for tiny
crates/programs where metadata decoding is a high part of compilation
costs.
A `RefCell` is needed because the methods that access lines data (which can
trigger decoding) take `&self` rather than `&mut self`. To allow for this,
`SourceFile::lines` now takes a `FnMut` that operates on the lines slice rather
than returning the lines slice.
r? `@Mark-Simulacrum`
`SourceFile::lines` is a big part of metadata. It's stored in a compressed form
(a difference list) to save disk space. Decoding it is a big fraction of
compile time for very small crates/programs.
This commit introduces a new type `SourceFileLines` which has a `Lines`
form and a `Diffs` form. The latter is used when the metadata is first
read, and it is only decoded into the `Lines` form when line data is
actually needed. This avoids the decoding cost for many files,
especially in `std`. It's a performance win of up to 15% for tiny
crates/programs where metadata decoding is a high part of compilation
costs.
A `Lock` is needed because the methods that access lines data (which can
trigger decoding) take `&self` rather than `&mut self`. To allow for this,
`SourceFile::lines` now takes a `FnMut` that operates on the lines slice rather
than returning the lines slice.
Refactor call terminator to always include destination place
In #71117 people seemed to agree that call terminators should always have a destination place, even if the call was guaranteed to diverge. This implements that. Unsurprisingly, the diff touches a lot of code, but thankfully I had to do almost nothing interesting. The only interesting thing came up in const prop, where the stack frame having no return place was also used to indicate that the layout could not be computed (or similar). I replaced this with a ZST allocation, which should continue to do the right things.
cc `@RalfJung` `@eddyb` who were involved in the original conversation
r? rust-lang/mir-opt
Lifetime variance fixes for clippy
#97287 migrates rustc to a `Ty` type that is invariant over its lifetime `'tcx`, so I need to fix a bunch of places that assume that `Ty<'a>` and `Ty<'b>` can be shortened to some common lifetime.
This is doable, since everything is already `'tcx`, so all this PR does is be a bit more explicit that elided lifetimes are actually `'tcx`.
Split out from #97287 so the clippy team can review independently.
