Reimplement `carrying_add` and `borrowing_sub` for signed integers.
As per the discussion in #85532, this PR reimplements `carrying_add` and `borrowing_sub` for signed integers.
It also adds unit tests for both unsigned and signed integers, emphasing on the behaviours of the methods.
Expose `Utf8Lossy` as `Utf8Chunks`
This PR changes the feature for `Utf8Lossy` from `str_internals` to `utf8_lossy` and improves the API. This is done to eventually expose the API as stable.
Proposal: rust-lang/libs-team#54
Tracking Issue: #99543
Add `Iterator::array_chunks` (take N+1)
A revival of https://github.com/rust-lang/rust/pull/92393.
r? `@Mark-Simulacrum`
cc `@rossmacarthur` `@scottmcm` `@the8472`
I've tried to address most of the review comments on the previous attempt. The only thing I didn't address is `try_fold` implementation, I've left the "custom" one for now, not sure what exactly should it use.
Stabilize `core::ffi:c_*` and rexport in `std::ffi`
This only stabilizes the base types, not the non-zero variants, since
those have their own separate tracking issue and have not gone through
FCP to stabilize.
This only stabilizes the base types, not the non-zero variants, since
those have their own separate tracking issue and have not gone through
FCP to stabilize.
Add the Provider api to core::any
This is an implementation of [RFC 3192](https://github.com/rust-lang/rfcs/pull/3192) ~~(which is yet to be merged, thus why this is a draft PR)~~. It adds an API for type-driven requests and provision of data from trait objects. A primary use case is for the `Error` trait, though that is not implemented in this PR. The only major difference to the RFC is that the functionality is added to the `any` module, rather than being in a sibling `provide_any` module (as discussed in the RFC thread).
~~Still todo: improve documentation on items, including adding examples.~~
cc `@yaahc`
Add a dedicated length-prefixing method to `Hasher`
This accomplishes two main goals:
- Make it clear who is responsible for prefix-freedom, including how they should do it
- Make it feasible for a `Hasher` that *doesn't* care about Hash-DoS resistance to get better performance by not hashing lengths
This does not change rustc-hash, since that's in an external crate, but that could potentially use it in future.
Fixes#94026
r? rust-lang/libs
---
The core of this change is the following two new methods on `Hasher`:
```rust
pub trait Hasher {
/// Writes a length prefix into this hasher, as part of being prefix-free.
///
/// If you're implementing [`Hash`] for a custom collection, call this before
/// writing its contents to this `Hasher`. That way
/// `(collection![1, 2, 3], collection![4, 5])` and
/// `(collection![1, 2], collection![3, 4, 5])` will provide different
/// sequences of values to the `Hasher`
///
/// The `impl<T> Hash for [T]` includes a call to this method, so if you're
/// hashing a slice (or array or vector) via its `Hash::hash` method,
/// you should **not** call this yourself.
///
/// This method is only for providing domain separation. If you want to
/// hash a `usize` that represents part of the *data*, then it's important
/// that you pass it to [`Hasher::write_usize`] instead of to this method.
///
/// # Examples
///
/// ```
/// #![feature(hasher_prefixfree_extras)]
/// # // Stubs to make the `impl` below pass the compiler
/// # struct MyCollection<T>(Option<T>);
/// # impl<T> MyCollection<T> {
/// # fn len(&self) -> usize { todo!() }
/// # }
/// # impl<'a, T> IntoIterator for &'a MyCollection<T> {
/// # type Item = T;
/// # type IntoIter = std::iter::Empty<T>;
/// # fn into_iter(self) -> Self::IntoIter { todo!() }
/// # }
///
/// use std:#️⃣:{Hash, Hasher};
/// impl<T: Hash> Hash for MyCollection<T> {
/// fn hash<H: Hasher>(&self, state: &mut H) {
/// state.write_length_prefix(self.len());
/// for elt in self {
/// elt.hash(state);
/// }
/// }
/// }
/// ```
///
/// # Note to Implementers
///
/// If you've decided that your `Hasher` is willing to be susceptible to
/// Hash-DoS attacks, then you might consider skipping hashing some or all
/// of the `len` provided in the name of increased performance.
#[inline]
#[unstable(feature = "hasher_prefixfree_extras", issue = "88888888")]
fn write_length_prefix(&mut self, len: usize) {
self.write_usize(len);
}
/// Writes a single `str` into this hasher.
///
/// If you're implementing [`Hash`], you generally do not need to call this,
/// as the `impl Hash for str` does, so you can just use that.
///
/// This includes the domain separator for prefix-freedom, so you should
/// **not** call `Self::write_length_prefix` before calling this.
///
/// # Note to Implementers
///
/// The default implementation of this method includes a call to
/// [`Self::write_length_prefix`], so if your implementation of `Hasher`
/// doesn't care about prefix-freedom and you've thus overridden
/// that method to do nothing, there's no need to override this one.
///
/// This method is available to be overridden separately from the others
/// as `str` being UTF-8 means that it never contains `0xFF` bytes, which
/// can be used to provide prefix-freedom cheaper than hashing a length.
///
/// For example, if your `Hasher` works byte-by-byte (perhaps by accumulating
/// them into a buffer), then you can hash the bytes of the `str` followed
/// by a single `0xFF` byte.
///
/// If your `Hasher` works in chunks, you can also do this by being careful
/// about how you pad partial chunks. If the chunks are padded with `0x00`
/// bytes then just hashing an extra `0xFF` byte doesn't necessarily
/// provide prefix-freedom, as `"ab"` and `"ab\u{0}"` would likely hash
/// the same sequence of chunks. But if you pad with `0xFF` bytes instead,
/// ensuring at least one padding byte, then it can often provide
/// prefix-freedom cheaper than hashing the length would.
#[inline]
#[unstable(feature = "hasher_prefixfree_extras", issue = "88888888")]
fn write_str(&mut self, s: &str) {
self.write_length_prefix(s.len());
self.write(s.as_bytes());
}
}
```
With updates to the `Hash` implementations for slices and containers to call `write_length_prefix` instead of `write_usize`.
`write_str` defaults to using `write_length_prefix` since, as was pointed out in the issue, the `write_u8(0xFF)` approach is insufficient for hashers that work in chunks, as those would hash `"a\u{0}"` and `"a"` to the same thing. But since `SipHash` works byte-wise (there's an internal buffer to accumulate bytes until a full chunk is available) it overrides `write_str` to continue to use the add-non-UTF-8-byte approach.
---
Compatibility:
Because the default implementation of `write_length_prefix` calls `write_usize`, the changed hash implementation for slices will do the same thing the old one did on existing `Hasher`s.
This accomplishes two main goals:
- Make it clear who is responsible for prefix-freedom, including how they should do it
- Make it feasible for a `Hasher` that *doesn't* care about Hash-DoS resistance to get better performance by not hashing lengths
This does not change rustc-hash, since that's in an external crate, but that could potentially use it in future.
Faster parsing for lower numbers for radix up to 16 (cont.)
( Continuation of https://github.com/rust-lang/rust/pull/83371 )
With LingMan's change I think this is potentially ready.
Implement provenance preserving methods on NonNull
### Description
Add the `addr`, `with_addr`, `map_addr` methods to the `NonNull` type, and map the address type to `NonZeroUsize`.
### Motivation
The `NonNull` type is useful for implementing pointer types which have the 0-niche. It is currently possible to implement these provenance preserving functions by calling `NonNull::as_ptr` and `new_unchecked`. The adding these methods makes it more ergonomic.
### Testing
Added a unit test of a non-null tagged pointer type. This is based on some real code I have elsewhere, that currently routes the pointer through a `NonZeroUsize` and back out to produce a usable pointer. I wanted to produce an ideal version of the same tagged pointer struct that preserved pointer provenance.
### Related
Extension of APIs proposed in #95228 . I can also split this out into a separate tracking issue if that is better (though I may need some pointers on how to do that).
**Description**
Add the `addr`, `with_addr, `map_addr` methods to the `NonNull` type,
and map the address type to `NonZeroUsize`.
**Motiviation**
The `NonNull` type is useful for implementing pointer types which have
the 0-niche. It is currently possible to implement these provenance
preserving functions by calling `NonNull::as_ptr` and `new_unchecked`.
The addition of these methods simply make it more ergonomic to use.
**Testing**
Added a unit test of a nonnull tagged pointer type. This is based on
some real code I have elsewhere, that currently routes the pointer
through a `NonZeroUsize` and back out to produce a usable pointer.
Add Iterator::collect_into
This PR adds `Iterator::collect_into` as proposed by ``@cormacrelf`` in #48597 (see https://github.com/rust-lang/rust/pull/48597#issuecomment-842083688).
Followup of #92982.
This adds the following method to the Iterator trait:
```rust
fn collect_into<E: Extend<Self::Item>>(self, collection: &mut E) -> &mut E
```
Implement `RawWaker` and `Waker` getters for underlying pointers
implement #87021
New APIs:
- `RawWaker::data(&self) -> *const ()`
- `RawWaker::vtable(&self) -> &'static RawWakerVTable`
- ~`Waker::as_raw_waker(&self) -> &RawWaker`~ `Waker::as_raw(&self) -> &RawWaker`
This third one is an auxiliary function to make the two APIs above more useful. Since we can only get `&Waker` in `Future::poll`, without this, we need to `transmute` it into `&RawWaker` (relying on `repr(transparent)`) in order to access its data/vtable pointers.
~Not sure if it should be named `as_raw` or `as_raw_waker`. Seems we always use `as_<something-raw>` instead of just `as_raw`. But `as_raw_waker` seems not quite consistent with `Waker::from_raw`.~ As suggested in https://github.com/rust-lang/rust/pull/91828#discussion_r770729837, use `as_raw`.
