internal: Format let-else
As nightly finally got support for it I went ahead and formatted r-a with the latest nightly, then with the latest stable (in case other stuff changed)
Fix runnable detection for `#[tokio::test]`
fix#15141
It is hacky, and it wouldn't work for e.g. this case:
```Rust
use ::core::prelude;
#[prelude::v1::test]
fn foo() {
}
```
But it works for the tokio case. We should use the name resolution here somehow, and after that we should probably also get rid of the ast based `test_related_attribute` function.
internal: add `library` fixture meta
Currently, there is no way to specify `CrateOrigin` of a file fixture ([this] might be a bug?). This PR adds `library` meta to explicitly specify the fixture to be `CrateOrigin::Library` and also makes sure crates that belong to a library source root are set `CrateOrigin::Library`.
(`library` isn't really the best name. It essentially means that the crate is outside workspace but `non_workspace_member` feels a bit too long. Suggestions for the better name would be appreciated)
Additionally:
- documents the fixture meta syntax as thoroughly as possible
- refactors relevant code
[this]: 4b06d3c595/crates/base-db/src/fixture.rs (L450)
internal: Add run-tests command
This command is similar to `cargo test` except that it uses r-a to run tests instead of compiling and running them with rustc. This is slower than `cargo test` and it is only useful for me to see a bird view of what needs to be fixed. The current output is:
```
48 passed, 5028 failed, 2 ignored
All tests 174.74s, 648ginstr
```
48 is very low, but higher than what I originally thought.
Now that there is some passing tests, I can show the plan:
https://github.com/rust-lang/rust-analyzer/assets/45197576/76d7d777-1843-4ca4-b7fe-e463bdade6cb
That is, at the end, I want to be able to immediately re run every test after every change. (0.5s is not really immediate, but it's not finished yet, and it is way better than 8s that running a typical test in r-a will take on my system)
Added a test near positive extermes and two test near negative
extermes as well one for 0.
Added a test using the `as` cast and one with comparison with 0.
fix: Fix nav target calculation discarding file ids from differing macro upmapping
Fixes https://github.com/rust-lang/rust-analyzer/issues/14792
Turns out there was the assumption that upmapping from a macro will always end in the same root file, which is no longer the case thanks to `include!`
Add signature help for tuple patterns and expressions
~~These are somewhat wonky since their signature changes as you type depending on context but they help out nevertheless.~~ should be less wonky now with added parser and lowering recoveries
fix: Don't duplicate sysroot crates in rustc workspace
Since we handle `library` as the sysroot source directly in the rustc workspace, we now duplicate the crates there, once as sysroot and once as just plain workspace crate. This causes a variety of issues for `vec!` macros and similar that emit `$crate` tokens across crates.
Prioritize threads affected by user typing
To this end I’ve introduced a new custom thread pool type which can spawn threads using each QoS class. This way we can run latency-sensitive requests under one QoS class and everything else under another QoS class. The implementation is very similar to that of the `threadpool` crate (which is currently used by rust-analyzer) but with unused functionality stripped out.
I’ll have to rebase on master once #14859 is merged but I think everything else is alright :D
This code replaces the thread pool implementation we were using
previously (from the `threadpool` crate). By making the thread pool
aware of QoS, each job spawned on the thread pool can have a different
QoS class.
This commit also replaces every QoS class used previously with Default
as a temporary measure so that each usage can be chosen deliberately.
Specify thread types using Quality of Service API
<details>
<summary>Some background (in case you haven’t heard of QoS before)</summary>
Heterogenous multi-core CPUs are increasingly found in laptops and desktops (e.g. Alder Lake, Snapdragon 8cx Gen 3, M1). To maximize efficiency on this kind of hardware, it is important to provide the operating system with more information so threads can be scheduled on different core types appropriately.
The approach that XNU (the kernel of macOS, iOS, etc) and Windows have taken is to provide a high-level semantic API – quality of service, or QoS – which informs the OS of the program’s intent. For instance, you might specify that a thread is running a render loop for a game. This makes the OS provide this thread with as large a share of the system’s resources as possible. Specifying a thread is running an unimportant background task, on the other hand, is cause for it to be scheduled exclusively on high-efficiency cores instead of high-performance cores.
QoS APIs allows for easy configuration of many different parameters at once; for instance, setting QoS on XNU affects scheduling, timer latency, I/O priorities, and of course what core type the thread in question should run on. I don’t know any details on how QoS works on Windows, but I would guess it’s similar.
Hypothetically, taking advantage of these APIs would improve power consumption, thermals, battery life if applicable, etc.
</details>
# Relevance to rust-analyzer
From what I can tell the philosophy behind both the XNU and Windows QoS APIs is that _user interfaces should never stutter under any circumstances._ You can see this in the array of QoS classes which are available: the highest QoS class in both APIs is one intended explicitly for UI render loops.
Imagine rust-analyzer is performing CPU-intensive background work – maybe you just invoked Find Usages on `usize` or opened a large project – in this scenario the editor’s render loop should absolutely get higher priority than rust-analyzer, no matter what. You could view it in terms of “realtime-ness”: flight control software is hard realtime, audio software is soft realtime, GUIs are softer realtime, and rust-analyzer is not realtime at all. Of course, maximizing responsiveness is important, but respecting the rest of the system is more important.
# Implementation
I’ve tried my best to unify thread creation in `stdx`, where the new API I’ve introduced _requires_ specifying a QoS class. Different points along the performance/efficiency curve can make a great difference; the M1’s e-cores use around three times less power than the p-cores, so putting in this effort is worthwhile IMO.
It’s worth mentioning that Linux does not [yet](https://youtu.be/RfgPWpTwTQo) have a QoS API. Maybe translating QoS into regular thread priorities would be acceptable? From what I can tell the only scheduling-related code in rust-analyzer is Windows-specific, so ignoring QoS entirely on Linux shouldn’t cause any new issues. Also, I haven’t implemented support for the Windows QoS APIs because I don’t have a Windows machine to test on, and because I’m completely unfamiliar with Windows APIs :)
I noticed that rust-analyzer handles some requests on the main thread (using `.on_sync()`) and others on a threadpool (using `.on()`). I think it would make sense to run the main thread at the User Initiated QoS and the threadpool at Utility, but only if all requests that are caused by typing use `.on_sync()` and all that don’t use `.on()`. I don’t understand how the `.on_sync()`/`.on()` split that’s currently present was chosen, so I’ve let this code be for the moment. Let me know if changing this to what I proposed makes any sense.
To avoid having to change everything back in case I’ve misunderstood something, I’ve left all threads at the Utility QoS for now. Of course, this isn’t what I hope the code will look like in the end, but I figured I have to start somewhere :P
# References
<ul>
<li><a href="https://developer.apple.com/library/archive/documentation/Performance/Conceptual/power_efficiency_guidelines_osx/PrioritizeWorkAtTheTaskLevel.html">Apple documentation related to QoS</a></li>
<li><a href="67e155c940/include/pthread/qos.h">pthread API for setting QoS on XNU</a></li>
<li><a href="https://learn.microsoft.com/en-us/windows/win32/procthread/quality-of-service">Windows’s QoS classes</a></li>
<li>
<details>
<summary>Full documentation of XNU QoS classes. This documentation is only available as a huge not-very-readable comment in a header file, so I’ve reformatted it and put it here for reference.</summary>
<ul>
<li><p><strong><code>QOS_CLASS_USER_INTERACTIVE</code>: A QOS class which indicates work performed by this thread is interactive with the user.</strong></p><p>Such work is requested to run at high priority relative to other work on the system. Specifying this QOS class is a request to run with nearly all available system CPU and I/O bandwidth even under contention. This is not an energy-efficient QOS class to use for large tasks. The use of this QOS class should be limited to critical interaction with the user such as handling events on the main event loop, view drawing, animation, etc.</p></li>
<li><p><strong><code>QOS_CLASS_USER_INITIATED</code>: A QOS class which indicates work performed by this thread was initiated by the user and that the user is likely waiting for the results.</strong></p><p>Such work is requested to run at a priority below critical user-interactive work, but relatively higher than other work on the system. This is not an energy-efficient QOS class to use for large tasks. Its use should be limited to operations of short enough duration that the user is unlikely to switch tasks while waiting for the results. Typical user-initiated work will have progress indicated by the display of placeholder content or modal user interface.</p></li>
<li><p><strong><code>QOS_CLASS_DEFAULT</code>: A default QOS class used by the system in cases where more specific QOS class information is not available.</strong></p><p>Such work is requested to run at a priority below critical user-interactive and user-initiated work, but relatively higher than utility and background tasks. Threads created by <code>pthread_create()</code> without an attribute specifying a QOS class will default to <code>QOS_CLASS_DEFAULT</code>. This QOS class value is not intended to be used as a work classification, it should only be set when propagating or restoring QOS class values provided by the system.</p></li>
<li><p><strong><code>QOS_CLASS_UTILITY</code>: A QOS class which indicates work performed by this thread may or may not be initiated by the user and that the user is unlikely to be immediately waiting for the results.</strong></p><p>Such work is requested to run at a priority below critical user-interactive and user-initiated work, but relatively higher than low-level system maintenance tasks. The use of this QOS class indicates the work should be run in an energy and thermally-efficient manner. The progress of utility work may or may not be indicated to the user, but the effect of such work is user-visible.</p></li>
<li><p><strong><code>QOS_CLASS_BACKGROUND</code>: A QOS class which indicates work performed by this thread was not initiated by the user and that the user may be unaware of the results.</strong></p><p>Such work is requested to run at a priority below other work. The use of this QOS class indicates the work should be run in the most energy and thermally-efficient manner.</p></li>
<li><p><strong><code>QOS_CLASS_UNSPECIFIED</code>: A QOS class value which indicates the absence or removal of QOS class information.</strong></p><p>As an API return value, may indicate that threads or pthread attributes were configured with legacy API incompatible or in conflict with the QOS class system.</p></li>
</ul>
</details>
</li>
</ul>
Fix `preorder_expr` skipping the `else` block of let-else statements
Fixes exit/yield points not getting highlighted in such blocks for `highlight_related` (#14813; and possibly other bugs in features that use `preorder_expr`).
Fixes exit/yield points not getting highlighted in such blocks for `highlight_related` (#14813; and possibly other bugs in features that use `preorder_expr`).
MIR episode 5
This PR inits drop support (it is very broken at this stage, some things are dropped multiple time, drop scopes are wrong, ...) and adds stdout support (`println!` doesn't work since its expansion is dummy, but `stdout().write(b"hello world\n")` works if you use `RA_SYSROOT_HACK`) for interpreting. There is no useful unit test that it can interpret yet, but it is a good sign that it didn't hit a major road block yet.
In MIR lowering, it adds support for slice pattern and anonymous const blocks, and some fixes so that we can evaluate `SmolStr::new_inline` in const eval. With these changes, 57 failed mir body remains.
Make line-index a lib, use nohash_hasher
These seem like they are not specific to rust-analyzer and could be pulled out to their own libraries. So I did.
https://github.com/azdavis/millet/issues/31
Refactor symbol index
Closes https://github.com/rust-lang/rust-analyzer/issues/14677
instead of eagerly fetching the source data in symbol index we do it lazily now, this shouldn't make it much more expensive as we had to parse the source most of the time anyways even after fetching.
fix: ide: exclude sized in go-to actions in hover
fixes#13163
i opted to just simply omit `Sized` entirely from go-to actions, as opposed to including it if even someone writes an explicit `T: Sized`, as i think a go-to on Sized is of dubious value practically.
minor: Fix some simple FIXMEs
Each FIXME fix has been split into its own commit, since they're all pretty independent changes.
(Forgot to open a PR for this a few days ago, oops)
internal: Add config to specifiy lru capacities for all queries
Might help figuring out what queries should be limited by LRU by default, as currently we only limit `parse`, `parse_macro_expansion` and `macro_expand`.
MIR episode 2
This PR adds:
1. `need-mut` and `unused-mut` diagnostics
2. `View mir` command which shows MIR for the body under cursor, useful for debugging
3. MIR lowering for or-patterns and for-loops
Handle trait alias definitions
Part of #2773
This PR adds a bunch of structs and enum variants for trait aliases. Trait aliases should be handled as an independent item because they are semantically distinct from traits.
I basically started by adding `TraitAlias{Id, Loc}` to `hir_def::item_tree` and iterated adding necessary stuffs until compiler stopped complaining what's missing. Let me know if there's still anything I need to add.
I'm opening up this PR for early review and stuff. I'm planning to add tests for IDE functionalities in this PR, but not type-related support, for which I put FIXME notes.
Fix associated item visibility in block-local impls
Fixes#14046
When we're resolving visibility of block-local items...
> `self` normally refers to the containing non-block module, and `super` to its parent (etc.). However, visibilities must only refer to a module in the DefMap they're written in, so we restrict them when that happens. ([link])
...unless we're resolving visibility of associated items in block-local impls, because that impl is semantically "hoisted" to the nearest (non-block) module. With this PR, we skip the adjustment for such items.
Since visibility representation of those items is modified, this PR also adjusts visibility rendering in `HirDisplay`.
[link]: a6603fc21d/crates/hir-def/src/nameres/path_resolution.rs (L101-L103)
Fix: Run doctests for structs with lifetime parameters from IDE
Fixes#14142: Doctests can't be triggered for structs with lifetimes
This MR adds lifetime parameters to the structs path for runnables so that they can be triggered from an IDE as well.
This is my first MR for rust-analyzer, please let me know if I should change something, either in code or the description here.
Beginning of MIR
This pull request introduces the initial implementation of MIR lowering and interpreting in Rust Analyzer.
The implementation of MIR has potential to bring several benefits:
- Executing a unit test without compiling it: This is my main goal. It can be useful for quickly testing code changes and print-debugging unit tests without the need for a full compilation (ideally in almost zero time, similar to languages like python and js). There is a probability that it goes nowhere, it might become slower than rustc, or it might need some unreasonable amount of memory, or we may fail to support a common pattern/function that make it unusable for most of the codes.
- Constant evaluation: MIR allows for easier and more correct constant evaluation, on par with rustc. If r-a wants to fully support the type system, it needs full const eval, which means arbitrary code execution, which needs MIR or something similar.
- Supporting more diagnostics: MIR can be used to detect errors, most famously borrow checker and lifetime errors, but also mutability errors and uninitialized variables, which can be difficult/impossible to detect in HIR.
- Lowering closures: With MIR we can find out closure capture modes, which is useful in detecting if a closure implements the `FnMut` or `Fn` traits, and calculating its size and data layout.
But the current PR implements no diagnostics and doesn't support closures. About const eval, I removed the old const eval code and it now uses the mir interpreter. Everything that is supported in stable rustc is either implemented or is super easy to implement. About interpreting unit tests, I added an experimental config, disabled by default, that shows a `pass` or `fail` on hover of unit tests (ideally it should be a button similar to `Run test` button, but I didn't figured out how to add them). Currently, no real world test works, due to missing features including closures, heap allocation, `dyn Trait` and ... so at this point it is only useful for me selecting what to implement next.
The implementation of MIR is based on the design of rustc, the data structures are almost copy paste (so it should be easy to migrate it to a possible future stable-mir), but the lowering and interpreting code is from me.
fix:add a case in which remainig is None in resolveing types when resolving hir path.
fix#14030 The variable type is being determined incorrectly
This PR fixed a problem in which `go to definition` is jumping to the incorrect position because it was failing to resolve the type in case it defined in the module when resolving hir.
In addition, I added a test for this issue and refactored the related code.
This is my first PR and I am using a translation tool to write this text. Let me know if you have any problems.
fix: Search raw identifiers without prefix
When we find references/usages of a raw identifier, we should disregard `r#` prefix because there are keywords one can use without the prefix in earlier editions (see #13034; this bug is actually fallout from the PR). `name`, the text we're searching for, has already been stripped of the prefix, but the text of nodes we compare it to hasn't been.
The second commit is strictly refactoring, I can remove it if it's not much of value.
