Hide irrelevant lines in suggestions to allow for suggestions that are far from each other to be shown
This is an attempt to fix suggestions one part of which is 6 lines or more far from the first. I've noticed "the problem" (of not showing some parts of the suggestion) here: https://github.com/rust-lang/rust/pull/97759#discussion_r889689230.
I'm not sure about the implementation (this big closure is just bad and makes already complicated code even more so), but I want to at least discuss the result.
Here is an example of how this changes the output:
Before:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
5 |
6 |
7 |
8 |
...
```
After:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
...
31|
32~ } };
|
```
r? `@estebank`
`@rustbot` label +A-diagnostics +A-suggestion-diagnostics
Remove migrate borrowck mode
Closes#58781Closes#43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
Support tool lints with the `#[expect]` attribute (RFC 2383)
This PR fixes the ICE https://github.com/rust-lang/rust/issues/94953 by making the assert for converted expectation IDs conditional.
Additionally, it moves the lint expectation check into a separate query to support rustdoc and other tools. On the way, I've also added some tests to ensure that the attribute works for Clippy and rustdoc lints.
The number of changes comes from the long test file. This may look like a monster PR, this may smell like a monster PR and this may be a monster PR, but it's a harmless monster. 🦕
---
Closes: https://github.com/rust-lang/rust/issues/94953
cc: https://github.com/rust-lang/rust/issues/85549
r? `@wesleywiser`
cc: `@rust-lang/rustdoc`
Track if a where bound comes from a impl Trait desugar
With https://github.com/rust-lang/rust/pull/93803 `impl Trait` function arguments get desugared to hidden where bounds. However, Clippy needs to know if a bound was originally a `impl Trait` or an actual bound. This adds a field to the `WhereBoundPredicate` struct to keep track of this information during AST->HIR lowering.
r? `@cjgillot`
cc `@estebank` (as the reviewer of #93803)
Allow inline consts to reference generic params
Tracking issue: #76001
The RFC says that inline consts cannot reference to generic parameters (for now), same as array length expressions. And expresses that it's desirable for it to reference in-scope generics, when array length expressions gain that feature as well.
However it is possible to implement this for inline consts before doing this for all anon consts, because inline consts are only used as values and they won't be used in the type system. So we can have:
```rust
fn foo<T>() {
let x = [4i32; std::mem::size_of::<T>()]; // NOT ALLOWED (for now)
let x = const { std::mem::size_of::<T>() }; // ALLOWED with this PR!
let x = [4i32; const { std::mem::size_of::<T>() }]; // NOT ALLOWED (for now)
}
```
This would make inline consts super useful for compile-time checks and assertions:
```rust
fn assert_zst<T>() {
const { assert!(std::mem::size_of::<T>() == 0) };
}
```
This would create an error during monomorphization when `assert_zst` is instantiated with non-ZST `T`s. A error during mono might sound scary, but this is exactly what a "desugared" inline const would do:
```rust
fn assert_zst<T>() {
struct F<T>(T);
impl<T> F<T> {
const V: () = assert!(std::mem::size_of::<T>() == 0);
}
let _ = F::<T>::V;
}
```
It should also be noted that the current inline const implementation can already reference the type params via type inference, so this resolver-level restriction is not any useful either:
```rust
fn foo<T>() -> usize {
let (_, size): (PhantomData<T>, usize) = const {
const fn my_size_of<T>() -> (PhantomData<T>, usize) {
(PhantomData, std::mem::size_of::<T>())
}
my_size_of()
};
size
}
```
```@rustbot``` label: F-inline_const
Report undeclared lifetimes during late resolution.
First step in https://github.com/rust-lang/rust/pull/91557
We reuse the rib design of the current resolution framework. Specific `LifetimeRib` and `LifetimeRibKind` types are introduced. The most important variant is `LifetimeRibKind::Generics`, which happens each time we encounter something which may introduce generic lifetime parameters. It can be an item or a `for<...>` binder. The `LifetimeBinderKind` specifies how this rib behaves with respect to in-band lifetimes.
r? `@petrochenkov`
Refactor HIR item-like traversal (part 1)
Issue #95004
- Create hir_crate_items query which traverses tcx.hir_crate(()).owners to return a hir::ModuleItems
- use tcx.hir_crate_items in tcx.hir().items() to return an iterator of hir::ItemId
- use tcx.hir_crate_items to introduce a tcx.hir().par_items(impl Fn(hir::ItemId)) to traverse all items in parallel;
Signed-off-by: Miguel Guarniz <mi9uel9@gmail.com>
cc `@cjgillot`
- Create hir_crate_items query which traverses tcx.hir_crate(()).owners to return a hir::ModuleItems
- use tcx.hir_crate_items in tcx.hir().items() to return an iterator of hir::ItemId
- add par_items(impl Fn(hir::ItemId)) to traverse all items in parallel
Signed-off-by: Miguel Guarniz <mi9uel9@gmail.com>
Only point at the end of the crate. We could try making it point at the
beginning of the crate, but that is confused with `DUMMY_SP`, causing
the output to be *worse*.
This change will make it so that VSCode will *not* underline the whole
file when `main` is missing, so other errors will be visible.
Implement let-else type annotations natively
Tracking issue: #87335Fixes#89688, fixes#89807, edit: fixes #89960 as well
As explained in https://github.com/rust-lang/rust/issues/89688#issuecomment-940405082, the previous desugaring moved the let-else scrutinee into a dummy variable, which meant if you wanted to refer to it again in the else block, it had moved.
This introduces a new hir type, ~~`hir::LetExpr`~~ `hir::Let`, which takes over all the fields of `hir::ExprKind::Let(...)` and adds an optional type annotation. The `hir::Let` is then treated like a `hir::Local` when type checking a function body, specifically:
* `GatherLocalsVisitor` overrides a new `Visitor::visit_let_expr` and does pretty much exactly what it does for `visit_local`, assigning a local type to the `hir::Let` ~~(they could be deduplicated but they are right next to each other, so at least we know they're the same)~~
* It reuses the code in `check_decl_local` to typecheck the `hir::Let`, simply returning 'bool' for the expression type after doing that.
* ~~`FnCtxt::check_expr_let` passes this local type in to `demand_scrutinee_type`, and then imitates check_decl_local's pattern checking~~
* ~~`demand_scrutinee_type` (the blindest change for me, please give this extra scrutiny) uses this local type instead of of creating a new one~~
* ~~Just realised the `check_expr_with_needs` was passing NoExpectation further down, need to pass the type there too. And apparently this Expectation API already exists.~~
Some other misc notes:
* ~~Is the clippy code supposed to be autoformatted? I tried not to give huge diffs but maybe some rustfmt changes simply haven't hit it yet.~~
* in `rustc_ast_lowering/src/block.rs`, I noticed some existing `self.alias_attrs()` calls in `LoweringContext::lower_stmts` seem to be copying attributes from the lowered locals/etc to the statements. Is that right? I'm new at this, I don't know.
Tweak errors coming from `for`-loop, `?` and `.await` desugaring
* Suggest removal of `.await` on non-`Future` expression
* Keep track of obligations introduced by desugaring
* Remove span pointing at method for obligation errors coming from desugaring
* Point at called local sync `fn` and suggest making it `async`
```
error[E0277]: `()` is not a future
--> $DIR/unnecessary-await.rs:9:10
|
LL | boo().await;
| -----^^^^^^ `()` is not a future
| |
| this call returns `()`
|
= help: the trait `Future` is not implemented for `()`
help: do not `.await` the expression
|
LL - boo().await;
LL + boo();
|
help: alternatively, consider making `fn boo` asynchronous
|
LL | async fn boo () {}
| +++++
```
Fix#66731.
Stabilize asm! and global_asm!
Tracking issue: #72016
It's been almost 2 years since the original [RFC](https://github.com/rust-lang/rfcs/pull/2850) was posted and we're finally ready to stabilize this feature!
The main changes in this PR are:
- Removing `asm!` and `global_asm!` from the prelude as per the decision in #87228.
- Stabilizing the `asm` and `global_asm` features.
- Removing the unstable book pages for `asm` and `global_asm`. The contents are moved to the [reference](https://github.com/rust-lang/reference/pull/1105) and [rust by example](https://github.com/rust-lang/rust-by-example/pull/1483).
- All links to these pages have been removed to satisfy the link checker. In a later PR these will be replaced with links to the reference or rust by example.
- Removing the automatic suggestion for using `llvm_asm!` instead of `asm!` if you're still using the old syntax, since it doesn't work anymore with `asm!` no longer being in the prelude. This only affects code that predates the old LLVM-style `asm!` being renamed to `llvm_asm!`.
- Updating `stdarch` and `compiler-builtins`.
- Updating all the tests.
r? `@joshtriplett`
fix clippy format using `cargo fmt -p clippy_{lints,utils}`
manually revert rustfmt line truncations
rename to hir::Let in clippy
Undo the shadowing of various `expr` variables after renaming `scrutinee`
reduce destructuring of hir::Let to avoid `expr` collisions
cargo fmt -p clippy_{lints,utils}
bless new clippy::author output
Prior to PR #91205, checking for errors in the overall obligation
would check checking the `ParamEnv`, due to an incorrect
`super_visit_with` impl. With this bug fixed, we will now
bail out of impl candidate assembly if the `ParamEnv` contains
any error types.
In practice, this appears to be overly conservative - when an error
occurs early in compilation, we end up giving up early for some
predicates that we could have successfully evaluated without overflow.
By only checking for errors in the predicate itself, we avoid causing
additional spurious 'type annotations needed' errors after a 'real'
error has already occurred.
With this PR, the diagnostic changes caused by PR #91205 are reverted.
Visit `param_env` field in Obligation's `TypeFoldable` impl
This oversight appears to have gone unnoticed for a long time
without causing issues, but it should still be fixed.
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
Some "parenthesis" and "parentheses" fixes
"Parenthesis" is the singular (e.g. one `(` or one `)`) and "parentheses" is the plural (multiple `(` or `)`s) and this is not hard to mix up so here are some fixes for that.
Inspired by #89958
Add #[must_use] to From::from and Into::into
Risk of churn: **High**
Magic 8-Ball says: **Outlook not so good**
I figured I'd put this out there. If we don't do it now maybe we save it for a rainy day.
Parent issue: #89692
r? `@joshtriplett`
Fix ICE when `start` lang item has wrong generics
In my previous pr #87875 I missed the requirements on the `start` lang item due to its relative difficulty to test and opting for more conservative estimates. This fixes that by updating the requirement to be exactly one generic type.
The `start` lang item should have exactly one generic type for the return type of the `main` fn ptr passed to it. I believe having zero would previously *sometimes* compile (often with the use of `fn() -> ()` as the fn ptr but it was likely UB to call if the return type of `main` was not `()` as far as I know) however it also sometimes would not for various errors including ICEs and LLVM errors depending on exact situations. Having more than 1 generic has always failed with an ICE because only the one generic type is expected and provided.
Fixes#79559, fixes#73584, fixes#83117 (all duplicates)
Relevant to #9307
r? ````@cjgillot````
Uplift the invalid_atomic_ordering lint from clippy to rustc
This is mostly just a rebase of https://github.com/rust-lang/rust/pull/79654; I've copy/pasted the text from that PR below.
r? `@lcnr` since you reviewed the last one, but feel free to reassign.
---
This is an implementation of https://github.com/rust-lang/compiler-team/issues/390.
As mentioned, in general this turns an unconditional runtime panic into a (compile time) lint failure. It has no false positives, and the only false negatives I'm aware of are if `Ordering` isn't specified directly and is comes from an argument/constant/whatever.
As a result of it having no false positives, and the alternative always being strictly wrong, it's on as deny by default. This seems right.
In the [zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Uplift.20the.20.60invalid_atomic_ordering.60.20lint.20from.20clippy/near/218483957) `@joshtriplett` suggested that lang team should FCP this before landing it. Perhaps libs team cares too?
---
Some notes on the code for reviewers / others below
## Changes from clippy
The code is changed from [the implementation in clippy](68cf94f6a6/clippy_lints/src/atomic_ordering.rs) in the following ways:
1. Uses `Symbols` and `rustc_diagnostic_item`s instead of string literals.
- It's possible I should have just invoked Symbol::intern for some of these instead? Seems better to use symbol, but it did require adding several.
2. The functions are moved to static methods inside the lint struct, as a way to namespace them.
- There's a lot of other code in that file — which I picked as the location for this lint because `@jyn514` told me that seemed reasonable.
3. Supports unstable AtomicU128/AtomicI128.
- I did this because it was almost easier to support them than not — not supporting them would have (ideally) required finding a way not to give them a `rustc_diagnostic_item`, which would have complicated an already big macro.
- These don't have tests since I wasn't sure if/how I should make tests conditional on whether or not the target has the atomic... This is to a certain extent an issue of 64bit atomics too, but 128-bit atomics are much less common. Regardless, the existing tests should be *more* than thorough enough here.
4. Minor changes like:
- grammar tweaks ("loads cannot have `Release` **and** `AcqRel` ordering" => "loads cannot have `Release` **or** `AcqRel` ordering")
- function renames (`match_ordering_def_path` => `matches_ordering_def_path`),
- avoiding clippy-specific helper methods that don't exist in rustc_lint and didn't seem worth adding for this case (for example `cx.struct_span_lint` vs clippy's `span_lint_and_help` helper).
## Potential issues
(This is just about the code in this PR, not conceptual issues with the lint or anything)
1. I'm not sure if I should have used a diagnostic item for `Ordering` and its variants (I couldn't figure out how really, so if I should do this some pointers would be appreciated).
- It seems possible that failing to do this might possibly mean there are more cases this lint would miss, but I don't really know how `match_def_path` works and if it has any pitfalls like that, so maybe not.
2. I *think* I deprecated the lint in clippy (CC `@flip1995` who asked to be notified about clippy changes in the future in [this comment](https://github.com/rust-lang/rust/pull/75671#issuecomment-718731659)) but I'm not sure if I need to do anything else there.
- I'm kind of hoping CI will catch if I missed anything, since `x.py test src/tools/clippy` fails with a lot of errors with and without my changes (and is probably a nonsense command regardless). Running `cargo test` from src/tools/clippy also fails with unrelated errors that seem like refactorings that didnt update clippy? So, honestly no clue.
3. I wasn't sure if the description/example I gave good. Hopefully it is. The example is less thorough than the one from clippy here: https://rust-lang.github.io/rust-clippy/master/index.html#invalid_atomic_ordering. Let me know if/how I should change it if it needs changing.
4. It pulls in the `if_chain` crate. This crate was already used in clippy, and seems like it's used elsewhere in rustc, but I'm willing to rewrite it to not use this if needed (I'd prefer not to, all things being equal).
- Deprecate clippy::invalid_atomic_ordering
- Use rustc_diagnostic_item for the orderings in the invalid_atomic_ordering lint
- Reduce code duplication
- Give up on making enum variants diagnostic items and just look for
`Ordering` instead
I ran into tons of trouble with this because apparently the change to
store HIR attrs in a side table also gave the DefIds of the
constructor instead of the variant itself. So I had to change
`matches_ordering` to also check the grandparent of the defid as well.
- Rename `atomic_ordering_x` symbols to just the name of the variant
- Fix typos in checks - there were a few places that said "may not be
Release" in the diagnostic but actually checked for SeqCst in the lint.
- Make constant items const
- Use fewer diagnostic items
- Only look at arguments after making sure the method matches
This prevents an ICE when there aren't enough arguments.
- Ignore trait methods
- Only check Ctors instead of going through `qpath_res`
The functions take values, so this couldn't ever be anything else.
- Add if_chain to allowed dependencies
- Fix grammar
- Remove unnecessary allow
Link to edition guide instead of issues for 2021 lints.
This changes the 2021 lints to not link to github issues, but to the edition guide instead.
Fixes #86996
Make `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` warn by default
This PR makes the `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint warn by default.
To avoid showing a large number of un-actionable warnings to users, we only enable the lint for macros defined in the same crate. This ensures that users will be able to fix the warning by simply removing a semicolon.
In the future, I'd like to enable this lint unconditionally, and eventually make it into a hard error in a future edition. This PR is a step towards that goal.
Update BARE_TRAIT_OBJECT and ELLIPSIS_INCLUSIVE_RANGE_PATTERNS to errors in Rust 2021
This addresses https://github.com/rust-lang/rust/pull/81244 by updating two lints to errors in the Rust 2021 edition.
r? `@estebank`
Add `Unsupported` to `std::io::ErrorKind`
I noticed a significant portion of the uses of `ErrorKind::Other` in std is for unsupported operations.
The notion that a specific operation is not available on a target (and will thus never succeed) seems semantically distinct enough from just "an unspecified error occurred", which is why I am proposing to add the variant `Unsupported` to `std::io::ErrorKind`.
**Implementation**:
The following variant will be added to `std::io::ErrorKind`:
```rust
/// This operation is unsupported on this platform.
Unsupported
```
`std::io::ErrorKind::Unsupported` is an error returned when a given operation is not supported on a platform, and will thus never succeed; there is no way for the software to recover. It will be used instead of `Other` where appropriate, e.g. on wasm for file and network operations.
`decode_error_kind` will be updated to decode operating system errors to `Unsupported`:
- Unix and VxWorks: `libc::ENOSYS`
- Windows: `c::ERROR_CALL_NOT_IMPLEMENTED`
- WASI: `wasi::ERRNO_NOSYS`
**Stability**:
This changes the kind of error returned by some functions on some platforms, which I think is not covered by the stability guarantees of the std? User code could depend on this behavior, expecting `ErrorKind::Other`, however the docs already mention:
> Errors that are `Other` now may move to a different or a new `ErrorKind` variant in the future. It is not recommended to match an error against `Other` and to expect any additional characteristics, e.g., a specific `Error::raw_os_error` return value.
The most recent variant added to `ErrorKind` was `UnexpectedEof` in `1.6.0` (almost 5 years ago), but `ErrorKind` is marked as `#[non_exhaustive]` and the docs warn about exhaustively matching on it, so adding a new variant per se should not be a breaking change.
The variant `Unsupported` itself could be marked as `#[unstable]`, however, because this PR also immediately uses this new variant and changes the errors returned by functions I'm inclined to agree with the others in this thread that the variant should be insta-stabilized.
When the character next to `{}` is "shifted" (when mapping a byte index
in the format string to span) we should avoid shifting the span end
index, so first map the index of `}` to span, then bump the span,
instead of first mapping the next byte index to a span (which causes
bumping the end span too much).
Regression test added.
Fixes#83344
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like "&*" instead of just "*".
Implement Rust 2021 panic
This implements the Rust 2021 versions of `panic!()`. See https://github.com/rust-lang/rust/issues/80162 and https://github.com/rust-lang/rfcs/pull/3007.
It does so by replacing `{std, core}::panic!()` by a bulitin macro that expands to either `$crate::panic::panic_2015!(..)` or `$crate::panic::panic_2021!(..)` depending on the edition of the caller.
This does not yet make std's panic an alias for core's panic on Rust 2021 as the RFC proposes. That will be a separate change: c5273bdfb2 That change is blocked on figuring out what to do with https://github.com/rust-lang/rust/issues/80846 first.
Fix formatting for removed lints
- Don't add backticks for the reason a lint was removed. This is almost
never a code block, and when it is the backticks should be in the reason
itself.
- Don't assume clippy is the only tool that needs to be checked for
backwards compatibility
I split this out of https://github.com/rust-lang/rust/pull/80527/ because it kept causing tests to fail, and it's a good change to have anyway.
r? `@flip1995`
- Don't add backticks for the reason a lint was removed. This is almost
never a code block, and when it is the backticks should be in the reason
itself.
- Don't assume clippy is the only tool that needs to be checked for
backwards compatibility
make MIR graphviz generation use gsgdt
gsgdt [https://crates.io/crates/gsgdt] is a crate which provides an
interface for stringly typed graphs. It also provides generation of
graphviz dot format from said graph.
This is the first in a series of PRs on moving graphviz code out of rustc into normal crates and then implementating graph diffing on top of these crates.
r? `@oli-obk`
Update error to reflect that integer literals can have float suffixes
For example, `1` is parsed as an integer literal, but it can be turned
into a float with the suffix `f32`. Now the error calls them "numeric
literals" and notes that you can add a float suffix since they can be
either integers or floats.
Part of #68490.
Care has been taken to leave the old consts where appropriate, for testing backcompat regressions, module shadowing, etc. The intrinsics docs were accidentally referring to some methods on f64 as std::f64, which I changed due to being contrary with how we normally disambiguate the shadow module from the primitive. In one other place I changed std::u8 to std::ops since it was just testing path handling in macros.
For places which have legitimate uses of the old consts, deprecated attributes have been optimistically inserted. Although currently unnecessary, they exist to emphasize to any future deprecation effort the necessity of these specific symbols and prevent them from being accidentally removed.
For example, `1` is parsed as an integer literal, but it can be turned
into a float with the suffix `f32`. Now the error calls them "numeric
literals" and notes that you can add a float suffix since they can be
either integers or floats.
Qualify `panic!` as `core::panic!` in non-built-in `core` macros
Fixes#78333.
-----
Otherwise code like this
#![no_implicit_prelude]
fn main() {
::std::todo!();
::std::unimplemented!();
}
will fail to compile, which is unfortunate and presumably unintended.
This changes many invocations of `panic!` in a `macro_rules!` definition
to invocations of `$crate::panic!`, which makes the invocations hygienic.
Note that this does not make the built-in macro `assert!` hygienic.
Otherwise code like this
#![no_implicit_prelude]
fn main() {
::std::todo!();
::std::unimplemented!();
}
will fail to compile, which is unfortunate and presumably unintended.
This changes many invocations of `panic!` in a `macro_rules!` definition
to invocations of `$crate::panic!`, which makes the invocations hygienic.
Note that this does not make the built-in macro `assert!` hygienic.
This should make Clippy more resilient and will unblock #78343.
This PR is made against rust-lang/rust to avoid the need for a subtree
sync at @flip1995's suggestion in rust-lang/rust-clippy#6310.
add error_occured field to ConstQualifs,
fix#76064
I wasn't sure what `in_return_place` actually did and not sure why it returns `ConstQualifs` while it's sibling functions return `bool`. So I tried to make as minimal changes to the structure as possible. Please point out whether I have to refactor it or not.
r? `@oli-obk`
cc `@RalfJung`
