Detect the triple in the configure script for probing MSVC shenanigans and also
be sure to use `llvm-config` from the build host and not the target when
configuring compiler-rt.
Rust 1.7.0 and newer appears to require LLVM 3.6.0 or newer when
building against a version that's out of the tree with the --llvm-root
flag.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
The `--disable-jemalloc` configure option has a failure mode where it will
create a distribution that is not compatible with other compilers. For example
the nightly for Linux will assume that it will link to jemalloc by default as
an allocator for executable crates. If, however, a standard library is used
which was built via `./configure --disable-jemalloc` then this will fail
because the jemalloc crate wasn't built.
While this seems somewhat reasonable as a niche situation, the same mechanism is
used for disabling jemalloc for platforms that just don't support it. For
example if the rumprun target is compiled then the sibiling Linux target *also*
doesn't have jemalloc. This is currently a problem for our cross-build nightlies
which build many targets. If rumprun is also built, it will disable jemalloc for
all targets, which isn't desired.
This commit moves the platform-specific disabling of jemalloc as hardcoded logic
into the makefiles that is scoped per-platform. This way when configuring
multiple targets **without the `--disable-jemalloc` option specified** all
targets will get jemalloc as they should.
In other words, enforce what was documented in #30626 (and also stop blaming it on LLVM, we have at least one Python script of our own).
Also, there is no Python later than 2.7 and there never will be.
This commit adds a `--enable-rustbuild` option to the configure script which
will copy a different `Makefile.in` into place to intercept all `make`
invocations.
Currently this makefile only has one target, but it's expected to be filled out
quite a bit over time!
Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
r? @alexcrichton
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
We've been seeing a lot of timeouts in tests on the bots and investigation ended
pointing to jemalloc/jemalloc#315 as the culprit. Unfortunately it looks like
that doesn't seem to have a fix on the way soon, so let's temporarily downgrade
back to the previous version of jemalloc we were using (where #30434 was the
most recent upgrade)
We've been seeing a lot of timeouts in tests on the bots and investigation ended
pointing to jemalloc/jemalloc#315 as the culprit. Unfortunately it looks like
that doesn't seem to have a fix on the way soon, so let's temporarily downgrade
back to the previous version of jemalloc we were using (where #30434 was the
most recent upgrade)
This mixes in additional information into the hash that is
passed to -C extra-filename. It can be used to further distinguish
the standard libraries if they must be installed next to each
other.
Closes#29559
On some weird setup where $SHELL is a relative path (can happen under GNU
Screen,) `file -L "$BIN_TO_PROBE"` fails and $CFG_CPUTYPE is wrongly set to
i686. We should not only check its string value but also permission on
filesystem.
This commit changes our distribution and in-tree sources to pass the `-C rpath`
flag by default during compiles. This means that from-source builds, including
our release channels, will have this option enabled as well. Motivated
by #29941, this change means that the compiler should be usable as-is on all
platforms just after extraction or installation. This experience is already true
on Windows but on Unixes you still need to set up LD_LIBRARY_PATH or the
equivalent, which can often be unfortunate.
This option was originally turned off by default for Linux distributions who
tend to take care of these sorts of details themselves, so it is expected that
all those builds of Rust will want to pass `--disable-rpath` to the configure
script to preserve that behavior.
Closes#29941
On some weird setup where $SHELL is a relative path (can happen under GNU
Screen,) `file -L "$BIN_TO_PROBE"` fails and $CFG_CPUTYPE is wrongly set to
i686. We should not only check its string value but also permission on
filesystem.
This handles cases when the LLVM used isn't configured will the 'usual'
targets. Also, cases where LLVM is shared are also handled (ie with
`LD_LIBRARY_PATH` etc).
This commit changes our distribution and in-tree sources to pass the `-C rpath`
flag by default during compiles. This means that from-source builds, including
our release channels, will have this option enabled as well. Motivated
by #29941, this change means that the compiler should be usable as-is on all
platforms just after extraction or installation. This experience is already true
on Windows but on Unixes you still need to set up LD_LIBRARY_PATH or the
equivalent, which can often be unfortunate.
This option was originally turned off by default for Linux distributions who
tend to take care of these sorts of details themselves, so it is expected that
all those builds of Rust will want to pass `--disable-rpath` to the configure
script to preserve that behavior.
Closes#29941
The Rust build scripts do work if the source directory contains spaces. I tried to make it work with spaces. I managed to get the Rust's and LLVM's configure scripts to work with spaces in the path, but I could not figure out how to get the Rust makefiles working.
So for now, this PR updates Rust's `configure` to abort if the source path contains spaces. I also added a note about spaces in the source path to the README.
I think this should close#18477 for now.
Debian wants to build all binaries with particular hardening flags.
The Rust makefiles are inconsistent in which architectures they
correctly include CFLAGS/etc from the enivoronment (see mk/cfg/*).
This patch adds LDFLAGS, and then unconditionally prepends
CFLAGS/LDFLAGS/etc to the build commands.
Part of #28710
Landing pads during stage0 are now enabled by defaullt. Since this has its downsides and upsides either way, I made it possible to change the option through configure.
For most parts, rumprun currently looks like NetBSD, as they share the same
libc and drivers. However, being a unikernel, rumprun does not support
process management, signals or virtual memory, so related functions
might fail at runtime. Stack guards are disabled exactly for this reason.
Code for rumprun is always cross-compiled, it uses always static
linking and needs a custom linker.
it makes rustc compatible with gcc installation that are using
`--program-transform-name' configure flag (on OpenBSD for example).
- detects at configure the name of stdc++ library on the system
- use the detected name in llvm makefile (with enable-static-stdcpp),
and pass it to mklldeps.py
- generate mklldeps.rs using this detected name
note that CFG_STDCPP_NAME is about stdc++ name, not about libc++. If
using libc++, the default name will be `stdc++', but it won't be used
when linking.
Redirect stdout on the python bogosity detector. This is printing
pwd to the terminal currently.
Reformat the bogus python/cmake messages so they format correctly.
echo does not always escape newlines (it doesn't here), and multiline
strings don't whitespace munch.
r? @alexcrichton
Redirect stdout on the python bogosity detector. This is printing
pwd to the terminal currently.
Reformat the bogus python/cmake messages so they format correctly.
echo does not always escape newlines (it doesn't here), and multiline
strings don't whitespace munch.
under OpenBSD, it could be have present multiples versions of gcc compiler:
- gcc-4.2 (with patchs) : c/c++ compiler present in `/usr/bin`. It is unusable to build recent LLVM (so rustc too).
- gcc/g++ -4.9 : c/c++ compiler, installed as third-party with "ports" mechanism. The compiler is installed in `/usr/local` as `egcc` (and `eg++`).
this PR adds probing for `egcc` for `CFG_GCC`, if the first probed `gcc` is too old. It will set `CC` and `CXX` too, in order to pass the variables to LLVM configure if builded.
please note this PR is a first step in order to build rustc under OpenBSD with unpatched tree.
r? @alexcrichton
cc @brson @dhuseby
