Win32/WinSock APIs never call WSASetLastError() with WSAEINTR
unless a programmer specifically cancels the ongoing blocking call by
a deprecated WinSock1 API WSACancelBlockingCall().
So the errno check was simply removed and retry() became an id function
on Windows.
Note: Windows' equivalent of SIGINT is always handled in a separate thread:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms682541%28v=vs.85%29.aspx
"CTRL+C and CTRL+BREAK Signals"
Also, incidentally rename a type parameter and clean up some module imports.
This assert was likely inherited from some point, but it's not quite valid as a
no-timeout read may enter this loop, but data could be stolen by any other read
after the socket is deemed readable.
I saw this fail in a recent bors run where the assertion was tripped.
This assert was likely inherited from some point, but it's not quite valid as a
no-timeout read may enter this loop, but data could be stolen by any other read
after the socket is deemed readable.
I saw this fail in a recent bors run where the assertion was tripped.
This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
Per API meeting
https://github.com/rust-lang/meeting-minutes/blob/master/Meeting-API-review-2014-08-13.md
# Changes to `core::option`
Most of the module is marked as stable or unstable; most of the unstable items are awaiting resolution of conventions issues.
However, a few methods have been deprecated, either due to lack of use or redundancy:
* `take_unwrap`, `get_ref` and `get_mut_ref` (redundant, and we prefer for this functionality to go through an explicit .unwrap)
* `filtered` and `while`
* `mutate` and `mutate_or_set`
* `collect`: this functionality is being moved to a new `FromIterator` impl.
# Changes to `core::result`
Most of the module is marked as stable or unstable; most of the unstable items are awaiting resolution of conventions issues.
* `collect`: this functionality is being moved to a new `FromIterator` impl.
* `fold_` is deprecated due to lack of use
* Several methods found in `core::option` are added here, including `iter`, `as_slice`, and variants.
Due to deprecations, this is a:
[breaking-change]
This commits takes a similar strategy to the previous commit to implement
close_accept and clone for the native win32 pipes implementation.
Closes#15595
This commits implements {Tcp,Unix}Acceptor::{clone,close_accept} methods for
unix. A windows implementation is coming in a later commit.
The clone implementation is based on atomic reference counting (as with all
other clones), and the close_accept implementation is based on selecting on a
self-pipe which signals that a close has been seen.
int/uint aren't considered FFI safe, replace them with the actual type they
represent (i64/u64 or i32/u32). This is a breaking change, but at most a cast
to `uint` or `int` needs to be added.
[breaking-change]
* The caller should be responsible for cleaning up file descriptors
* If a caller safely creates a file descriptor (via
native::io::file::open) the returned structure (FileDesc) will try to
clean up the file, failing in the process and writing error messages
to the screen.
* This should not happen as the caller has no public interface for
telling the FileDesc structure to NOT free the underlying fd.
* Alternatively, if another file is opened under the same fd held by
the FileDesc structure returned by native::io::file::open, it will
close the wrong file upon destruction.
There was a bug in both libnative and libuv which prevented child processes from
being spawned correctly on windows when one of the arguments was an empty
string. The libuv bug has since been fixed upstream, and the libnative bug was
fixed as part of this commit.
When updating libuv, this also includes a fix for #15149.
Closes#15149Closes#16272
Made INVALID_HANDLE_VALUE actually a HANDLE.
Removed all useless casts during INVALID_HANDLE_VALUE comparisons.
Signed-off-by: Peter Atashian <retep998@gmail.com>
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
There was a bug in both libnative and libuv which prevented child processes from
being spawned correctly on windows when one of the arguments was an empty
string. The libuv bug has since been fixed upstream, and the libnative bug was
fixed as part of this commit.
When updating libuv, this also includes a fix for #15149.
Closes#15149Closes#16272
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
The BSD socket code does some cast tricks with the `libc::sockaddr*`
structs, which causes useful data to be stored in struct padding.
Since Load/Store instructions do not copy struct padding, this makes
these structures dangerous to pass or return by value.
In particular, https://github.com/rust-lang/rust/issues/15763 changes
return semantics so that a Load instruction is used, breaking the TCP
code. Once this PR is merged, that one should merge without error.
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
Previously, the call to bookkeeping::increment() was never paired with a
decrement when the spawn failed (due to unwinding). This fixes the problem by
returning a "bomb" from increment() which will decrement on drop, and then
moving the bomb into the child task's procedure which will be dropped naturally.
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
This commit applies stability attributes to the contents of these modules,
summarized here:
* The `unit` and `bool` modules have become #[unstable] as they are purely meant
for documentation purposes and are candidates for removal.
* The `ty` module has been deprecated, and the inner `Unsafe` type has been
renamed to `UnsafeCell` and moved to the `cell` module. The `marker1` field
has been removed as the compiler now always infers `UnsafeCell` to be
invariant. The `new` method i stable, but the `value` field, `get` and
`unwrap` methods are all unstable.
* The `tuple` module has its name as stable, the naming of the `TupleN` traits
as stable while the methods are all #[unstable]. The other impls in the module
have appropriate stability for the corresponding trait.
* The `arc` module has received the exact same treatment as the `rc` module
previously did.
* The `any` module has its name as stable. The `Any` trait is also stable, with
a new private supertrait which now contains the `get_type_id` method. This is
to make the method a private implementation detail rather than a public-facing
detail.
The two extension traits in the module are marked #[unstable] as they will not
be necessary with DST. The `is` method is #[stable], the as_{mut,ref} methods
have been renamed to downcast_{mut,ref} and are #[unstable].
The extension trait `BoxAny` has been clarified as to why it is unstable as it
will not be necessary with DST.
This is a breaking change because the `marker1` field was removed from the
`UnsafeCell` type. To deal with this change, you can simply delete the field and
only specify the value of the `data` field in static initializers.
[breaking-change]
Closes#15807 (Deprecate some unsafe functions in `str::raw` and remove `OwnedStr` trait)
Closes#15859 (Implement `Show` for `CString` and fix warning compiling tests for libcollections)
Closes#15911 (Updated LLVM for iOS)
Closes#15925 (libsyntax: Remove `~self` and `mut ~self` from the language.)
Closes#15930 (Add examples for Checked[Add|Sub|Mul|Div])
Closes#15933 (rustdoc: make table of contents optional)
Closes#15937 (librustc: Make bare functions implement the `FnMut` trait.)
Closes#15938 (librustc: Check structure constructors against their types.)
Closes#15939 (rustdoc: Add a --crate-name option)
Closes#15942 (Document trie collections)
Closes#15943 (Document SmallIntMap)
This eliminates the last vestige of the `~` syntax.
Instead of `~self`, write `self: Box<TypeOfSelf>`; instead of `mut
~self`, write `mut self: Box<TypeOfSelf>`, replacing `TypeOfSelf` with
the self-type parameter as specified in the implementation.
Closes#13885.
[breaking-change]
This also removes checks in other methods of `CString`
Breaking changes:
* `CString::new` now fails if `buf` is null. To avoid this add a check
before creatng a new `CString` .
* The `is_null` and `is_not_null` methods are deprecated, because a
`CString` cannot be null.
* Other methods which used to fail if the `CString` was null do not fail anymore
[breaking-change]
In order to have the spawning semantics be the same for unix/windows, the
child's PATH environment variable needs to be searched rather than the parent's
environment variable.
If the child is inheriting the parent's PATH, then no action need be taken as
windows will do the heavy lifting. If the child specifies its own PATH, then it
is searched beforehand for the target program and the result is favored if a hit
is found.
cc #15149, but does not close the issue because libgreen still needs to be
updated.
This commit changes the `io::process::Command` API to provide
fine-grained control over the environment:
* The `env` method now inserts/updates a key/value pair.
* The `env_remove` method removes a key from the environment.
* The old `env` method, which sets the entire environment in one shot,
is renamed to `env_set_all`. It can be used in conjunction with the
finer-grained methods. This renaming is a breaking change.
To support these new methods, the internal `env` representation for
`Command` has been changed to an optional `HashMap` holding owned
`CString`s (to support non-utf8 data). The `HashMap` is only
materialized if the environment is updated. The implementation does not
try hard to avoid allocation, since the cost of launching a process will
dwarf any allocation cost.
This patch also adds `PartialOrd`, `Eq`, and `Hash` implementations for
`CString`.
[breaking-change]
