These crates all needed specialization for `newtype_index!`, which will no
longer be necessary when the current nightly eventually becomes the next
bootstrap compiler.
Implementing traits marked with `#[rustc_specialization_trait]` normally
requires (min-)specialization to be enabled for the enclosing crate.
With this change, that permission can also be granted by an
`allow_internal_unstable` attribute on the macro that generates the impl.
Avoid a collection and iteration on empty passes
Just some mini optimization I saw in the wild. This way, we avoid a `collect` and `map` on an empty `passes`. Honestly, I don't even think this is big enough of a change to make a benchmark, but I'd still like to see results.
Based on [this book](https://nnethercote.github.io/perf-book/iterators.html#collect-and-extend)
For a rigid projection, recursively look at the self type's item bounds to fix the `associated_type_bounds` feature
Given a deeply nested rigid projection like `<<<T as Trait1>::Assoc1 as Trait2>::Assoc2 as Trait3>::Assoc3`, this PR adjusts both trait solvers to look at the item bounds for all of `Assoc3`, `Assoc2`, and `Assoc1` in order to satisfy a goal. We do this because the item bounds for projections may contain relevant bounds for *other* nested projections when the `associated_type_bounds` (ATB) feature is enabled. For example:
```rust
#![feature(associated_type_bounds)]
trait Trait1 {
type Assoc1: Trait2<Assoc2: Foo>;
// Item bounds for `Assoc1` are:
// `<Self as Trait1>::Assoc1: Trait2`
// `<<Self as Trait1>::Assoc1 as Trait2>::Assoc2: Foo`
}
trait Trait2 {
type Assoc2;
}
trait Foo {}
fn hello<T: Trait1>(x: <<T as Trait1>::Assoc1 as Trait2>::Assoc2) {
fn is_foo(_: impl Foo) {}
is_foo(x);
// Currently fails with:
// ERROR the trait bound `<<Self as Trait1>::Assoc1 as Trait2>::Assoc2: Foo` is not satisfied
}
```
This has been a long-standing place of brokenness for ATBs, and is also part of the reason why ATBs currently desugar so differently in various positions (i.e. sometimes desugaring to param-env bounds, sometimes desugaring to RPITs, etc). For example, in RPIT and TAIT position, `impl Foo<Bar: Baz>` currently desugars to `impl Foo<Bar = impl Baz>` because we do not currently take advantage of these nested item bounds if we desugared them into a single set of item bounds on the opaque. This is obviously both strange and unnecessary if we just take advantage of these bounds as we should.
## Approach
This PR repeatedly peels off each projection of a given goal's self type and tries to match its item bounds against a goal, repeating with the self type of the projection. This is pretty straightforward to implement in the new solver, only requiring us to loop on the self type of a rigid projection to discover inner rigid projections, and we also need to introduce an extra probe so we can normalize them.
In the old solver, we can do essentially the same thing, however we rely on the fact that projections *should* be normalized already. This is obviously not always the case -- however, in the case that they are not fully normalized, such as a projection which has both infer vars and, we bail out with ambiguity if we hit an infer var for the self type.
## Caveats
⚠️ In the old solver, this has the side-effect of actually stalling some higher-ranked trait goals of the form `for<'a> <?0 as Tr<'a>>: Tr2`. Because we stall them, they no longer are eagerly treated as error -- this cause some existing `known-bug` tests to go from fail -> pass.
I'm pretty unconvinced that this is a problem since we make code that we expect to pass in the *new* solver also pass in the *old* solver, though this obviously doesn't solve the *full* problem.
## And then also...
We also adjust the desugaring of ATB to always desugar to a regular associated bound, rather than sometimes to an impl Trait **except** for when the ATB is present in a `dyn Trait`. We need to lower `dyn Trait<Assoc: Bar>` to `dyn Trait<Assoc = impl Bar>` because object types need all of their associated types specified.
I would also be in favor of splitting out the ATB feature and/or removing support for object types in order to stabilize just the set of positions for which the ATB feature is consistent (i.e. always elaborates to a bound).
Build DebugInfo for async closures
The test is pretty bare, because I don't really know how to write debuginfo tests. I'd like to land this first, and then flesh it out correctly one it's no longer ICEing on master (which breaks people's ability to test using async closures).
r? oli-obk cc `@rust-lang/wg-debugging` (if any of y'all want to help me write a more fleshed out async closures test)
Emit more specific diagnostics when enums fail to cast with `as`
Fixes#120756
Changes this diagnostic reported in the issue:
```
error[E0605]: non-primitive cast: `Bad` as `u32`
--> src/main.rs:18:10
|
18 | dbg!(bad as u32);
| ^^^^^^^^^^ an `as` expression can only be used to convert between primitive types or to coerce to a specific trait object
```
to this:
```
error[E0605]: non-primitive cast: `Bad` as `u32`
--> src/main.rs:18:10
|
18 | dbg!(bad as u32);
| ^^^^^^^^^^ an `as` expression can be used to convert enum types to numeric types only if the enum type is unit-only or field-less
|
= note: see https://doc.rust-lang.org/reference/items/enumerations.html#casting for more information
```
This change is only for enums. The diagnostic remains unchanged for all other cases.
improve normalization of `Pointee::Metadata`
This PR makes it so that `<Wrapper<Tail> as Pointee>::Metadata` is normalized to `<Tail as Pointee>::Metadata` if we don't know `Wrapper<Tail>: Sized`. With that, the trait solver can prove projection predicates like `<Wrapper<Tail> as Pointee>::Metadata == <Tail as Pointee>::Metadata`, which makes it possible to use the metadata APIs to cast between the tail and the wrapper:
```rust
#![feature(ptr_metadata)]
use std::ptr::{self, Pointee};
fn cast_same_meta<T: ?Sized, U: ?Sized>(ptr: *const T) -> *const U
where
T: Pointee<Metadata = <U as Pointee>::Metadata>,
{
let (thin, meta) = ptr.to_raw_parts();
ptr::from_raw_parts(thin, meta)
}
struct Wrapper<T: ?Sized>(T);
fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
cast_same_meta(ptr)
}
```
Previously, this failed to compile:
```
error[E0271]: type mismatch resolving `<Wrapper<T> as Pointee>::Metadata == <T as Pointee>::Metadata`
--> src/lib.rs:16:5
|
15 | fn cast_to_wrapper<T: ?Sized>(ptr: *const T) -> *const Wrapper<T> {
| - found this type parameter
16 | cast_same_meta(ptr)
| ^^^^^^^^^^^^^^ expected `Wrapper<T>`, found type parameter `T`
|
= note: expected associated type `<Wrapper<T> as Pointee>::Metadata`
found associated type `<T as Pointee>::Metadata`
= note: an associated type was expected, but a different one was found
```
(Yes, you can already do this with `as` casts. But using functions is so much ✨ *safer* ✨, because you can't change the metadata on accident.)
---
This PR essentially changes the built-in impls of `Pointee` from this:
```rust
// before
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl Pointee for Wrapper<u8> {
type Metadata = ();
}
impl Pointee for Wrapper<[u8]> {
type Metadata = usize;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T: ?Sized> Pointee for Wrapper<T>
where
Wrapper<T>: Sized
{
type Metadata = ();
}
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
to this:
```rust
// after
impl Pointee for u8 {
type Metadata = ();
}
impl Pointee for [u8] {
type Metadata = usize;
}
// ...
impl<T: ?Sized> Pointee for Wrapper<T> {
// in the old solver this will instead project to the "deep" tail directly,
// e.g. `Wrapper<Wrapper<T>>::Metadata = T::Metadata`
type Metadata = <T as Pointee>::Metadata;
}
// ...
// This impl is only selected if `T` is a type parameter or unnormalizable projection or opaque type.
fallback impl<T /*: Sized */> Pointee for T {
type Metadata = ();
}
```
Fix `ErrorGuaranteed` unsoundness with stash/steal.
When you stash an error, the error count is incremented. You can then use the non-zero error count to get an `ErrorGuaranteed`. You can then steal the error, which decrements the error count. You can then cancel the error.
Example code:
```
fn unsound(dcx: &DiagCtxt) -> ErrorGuaranteed {
let sp = rustc_span::DUMMY_SP;
let k = rustc_errors::StashKey::Cycle;
dcx.struct_err("bogus").stash(sp, k); // increment error count on stash
let guar = dcx.has_errors().unwrap(); // ErrorGuaranteed from error count > 0
let err = dcx.steal_diagnostic(sp, k).unwrap(); // decrement error count on steal
err.cancel(); // cancel error
guar // ErrorGuaranteed with no error emitted!
}
```
This commit fixes the problem in the simplest way: by not counting stashed errors in `DiagCtxt::{err_count,has_errors}`.
However, just doing this without any other changes leads to over 40 ui test failures. Mostly because of uninteresting extra errors (many saying "type annotations needed" when type inference fails), and in a few cases, due to delayed bugs causing ICEs when no normal errors are printed.
To fix these, this commit adds `DiagCtxt::stashed_err_count`, and uses it in three places alongside `DiagCtxt::{has_errors,err_count}`. It's dodgy to rely on it, because unlike `DiagCtxt::err_count` it can go up and down. But it's needed to preserve existing behaviour, and at least the three places that need it are now obvious.
r? oli-obk
Fix more `ty::Error` ICEs in MIR passes
Fixes#120791 - Add a check for `ty::Error` in the `ByMove` coroutine pass
Fixes#120816 - Add a check for `ty::Error` in the MIR validator
Also a drive-by fix for a FIXME I had asked oli to add
r? oli-obk
A drive-by rewrite of `give_region_a_name()`
This drive-by rewrite makes the cache-updating nature of the method clearer, using the Entry API into the hash table for region names to capture the update-insert nature of the method. May be marginally more efficient since it only runtime-borrows and indexes the map once, but in this context the performance impact is almost certainly completely negligible.
Note that this commit should preserve all externally visible behaviour. Notably, it preserves the debug logging:
1. printing even in the case of a `None` for the new computed name, and
2. only printing on new values, begin silent on reused values
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
Make privacy visitor use types more (instead of HIR)
r? ``@petrochenkov``
This is a prerequisite to normalizing projections, as otherwise we have too many invalid bound vars (hir_ty_to_ty is creating types that have bound vars, but no binder).
The commits are still chaotic, I'm gonna clean them up, but I just wanted to let you know about the general direction and wondering if we could land this before adding normalization, as normalization is where behavioral changes happen, and I'd like to keep that part as minimal as possible.
[context can be found on zulip](https://rust-lang.zulipchat.com/#narrow/stream/315482-t-compiler.2Fetc.2Fopaque-types/topic/weak.20type.20aliases.20and.20privacy)
Toggle assert_unsafe_precondition in codegen instead of expansion
The goal of this PR is to make some of the unsafe precondition checks in the standard library available in debug builds. Some UI tests are included to verify that it does that.
The diff is large, but most of it is blessing mir-opt tests and I've also split up this PR so it can be reviewed commit-by-commit.
This PR:
1. Adds a new intrinsic, `debug_assertions` which is lowered to a new MIR NullOp, and only to a constant after monomorphization
2. Rewrites `assume_unsafe_precondition` to check the new intrinsic, and be monomorphic.
3. Skips codegen of the `assume` intrinsic in unoptimized builds, because that was silly before but with these checks it's *very* silly
4. The checks with the most overhead are `ptr::read`/`ptr::write` and `NonNull::new_unchecked`. I've simply added `#[cfg(debug_assertions)]` to the checks for `ptr::read`/`ptr::write` because I was unable to come up with any (good) ideas for decreasing their impact. But for `NonNull::new_unchecked` I found that the majority of callers can use a different function, often a safe one.
Yes, this PR slows down the compile time of some programs. But in our benchmark suite it's never more than 1% icount, and the average icount change in debug-full programs is 0.22%. I think that is acceptable for such an improvement in developer experience.
https://github.com/rust-lang/rust/issues/120539#issuecomment-1922687101
When you stash an error, the error count is incremented. You can then
use the non-zero error count to get an `ErrorGuaranteed`. You can then
steal the error, which decrements the error count. You can then cancel
the error.
Example code:
```
fn unsound(dcx: &DiagCtxt) -> ErrorGuaranteed {
let sp = rustc_span::DUMMY_SP;
let k = rustc_errors::StashKey::Cycle;
dcx.struct_err("bogus").stash(sp, k); // increment error count on stash
let guar = dcx.has_errors().unwrap(); // ErrorGuaranteed from error count > 0
let err = dcx.steal_diagnostic(sp, k).unwrap(); // decrement error count on steal
err.cancel(); // cancel error
guar // ErrorGuaranteed with no error emitted!
}
```
This commit fixes the problem in the simplest way: by not counting
stashed errors in `DiagCtxt::{err_count,has_errors}`.
However, just doing this without any other changes leads to over 40 ui
test failures. Mostly because of uninteresting extra errors (many saying
"type annotations needed" when type inference fails), and in a few
cases, due to delayed bugs causing ICEs when no normal errors are
printed.
To fix these, this commit adds `DiagCtxt::stashed_err_count`, and uses
it in three places alongside `DiagCtxt::{has_errors,err_count}`. It's
dodgy to rely on it, because unlike `DiagCtxt::err_count` it can go up
and down. But it's needed to preserve existing behaviour, and at least
the three places that need it are now obvious.
Fix mir pass ICE in the presence of other errors
fixes#120779
it is impossible to add a ui test for this, because it only reproduces in build-fail, but a test that also has errors in check-fail mode can't be made build-fail 🙃
I would have to add a run-make test or sth, which is overkill for such a tiny thing imo.
Make `min_exhaustive_patterns` match `exhaustive_patterns` better
Split off from https://github.com/rust-lang/rust/pull/120742.
There remained two edge cases where `min_exhaustive_patterns` wasn't behaving like `exhaustive_patterns`. This fixes them, and tests the feature in a bunch more cases. I essentially went through all uses of `exhaustive_patterns` to see which ones would be interesting to compare between the two features.
r? `@compiler-errors`
No need to take `ImplTraitContext` by ref
We used to mutate `ImplTraitContext`, so it used to be `&mut` mutable ref. Then I think it used to have non-`Copy` data in it, so we took it by `&` ref. Now, none of that remains, so just copy it around.
Remove unused args from functions
`#[instrument]` suppresses the unused arguments from a function, *and* suppresses unused methods too! This PR removes things which are only used via `#[instrument]` calls, and fixes some other errors (privacy?) that I will comment inline.
It's possible that some of these arguments were being passed in for the purposes of being instrumented, but I am unconvinced by most of them.
Introduce `enter_forall` to supercede `instantiate_binder_with_placeholders`
r? `@lcnr`
Long term we'd like to experiment with decrementing the universe count after "exiting" binders so that we do not end up creating infer vars in non-root universes even when they logically reside in the root universe. The fact that we dont do this currently results in a number of issues in the new trait solver where we consider goals to be ambiguous because otherwise it would require lowering the universe of an infer var. i.e. the goal `?x.0 eq <T as Trait<?y.1>>::Assoc` where the alias is rigid would not be able to instantiate `?x` with the alias as there would be a universe error.
This PR is the first-ish sort of step towards being able to implement this as eventually we would want to decrement the universe in `enter_forall`. Unfortunately its Difficult to actually implement decrementing universes nicely so this is a separate step which moves us closer to the long term goal ✨
