Add debug assertions to validate NUL terminator in c strings
The `unchecked` variants from the stdlib usually perform the check anyway if debug assertions are on (for example, `unwrap_unchecked`). This PR does the same thing for `CStr` and `CString`, validating the correctness for the NUL byte in debug mode.
rustdoc-json: buffer output
It turns out we were doing syscalls for each part of the json syntax
Before:
```
...
[pid 1801267] write(5, "\"", 1) = 1
[pid 1801267] write(5, ",", 1) = 1
[pid 1801267] write(5, "\"", 1) = 1
...
```
After:
```
[pid 1974821] write(5, "{\"root\":\"0:0\",\"crate_version\":nu"..., 1575) = 1575
```
In one benchmark (one struct, almost all time in `std`), this gives ~2x perf
r? `@CraftSpider`
`@rustbot` modify labels: +A-rustdoc-json +T-rustdoc -A-testsuite
Destabilise entry_insert
See: https://github.com/rust-lang/rust/pull/90345
I didn't revert the rename that was done in that PR, I left it as `entry_insert`.
Additionally, before that PR, `VacantEntry::insert_entry` seemingly had no stability attribute on it? I kept the attribute, just made it an unstable one, same as the one on `Entry`.
There didn't seem to be any mention of this in the RELEASES.md, so I don't think there's anything for me to do other than this?
Rollup of 10 pull requests
Successful merges:
- #89892 (Suggest `impl Trait` return type when incorrectly using a generic return type)
- #91675 (Add MemTagSanitizer Support)
- #92806 (Add more information to `impl Trait` error)
- #93497 (Pass `--test` flag through rustdoc to rustc so `#[test]` functions can be scraped)
- #93814 (mips64-openwrt-linux-musl: correct soft-foat)
- #93847 (kmc-solid: Use the filesystem thread-safety wrapper)
- #93877 (asm: Allow the use of r8-r14 as clobbers on Thumb1)
- #93892 (Only mark projection as ambiguous if GAT substs are constrained)
- #93915 (Implement --check-cfg option (RFC 3013), take 2)
- #93953 (Add the `known-bug` test directive, use it, and do some cleanup)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add the `known-bug` test directive, use it, and do some cleanup
cc rust-lang/compiler-team#476
Now tests can be annotated with `known-bug`, which should indicate that the test *should* pass (or at least that the current output is a bug). Adding it relaxes the requirement to add error annotations to the test (though it is still allowed). In the future, this could be extended with further relaxations - with the goal to make adding these tests need minimal effort.
I've used this attribute for the GAT tests added in #93757.
Finally, I've also cleaned up `header.rs` in compiletest a bit, by extracting out a bit of common logic. I've also split out some of the directives into their own consts. This removes a lot of very similar functions from `Config` and makes `TestProps::load_from` read nicer.
I've split these into separate commits, so I in theory could split these into separate PRs if they're controversial, but I think they're pretty straightforward.
r? ``@Mark-Simulacrum``
Only mark projection as ambiguous if GAT substs are constrained
A slightly more targeted version of #92917, where we only give up with ambiguity if we infer something about the GATs substs when probing for a projection candidate.
fixes#93874
also note (but like the previous PR, does not fix) #91762
r? `@jackh726`
cc `@nikomatsakis` who reviewed #92917
asm: Allow the use of r8-r14 as clobbers on Thumb1
Previously these were entirely disallowed, except for r11 which was allowed by accident.
cc `@hudson-ayers`
kmc-solid: Use the filesystem thread-safety wrapper
Fixes the thread unsafety of the `std::fs` implementation used by the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets.
Neither the SOLID filesystem API nor built-in filesystem drivers guarantee thread safety by default. Although this may suffice in general embedded-system use cases, and in fact the API can be used from multiple threads without any problems in many cases, this has been a source of unsoundness in `std::sys::solid::fs`.
This commit updates the implementation to leverage the filesystem thread-safety wrapper (which uses a pluggable synchronization mechanism) to enforce thread safety. This is done by prefixing all paths passed to the filesystem API with `\TS`. (Note that relative paths aren't supported in this platform.)
mips64-openwrt-linux-musl: correct soft-foat
MIPS64 targets under OpenWrt require soft-float fpu support.
Rust-lang requires soft-float defined in tuple definition and
isn't over-ridden by toolchain compile-time CFLAGS/LDFLAGS
Set explicit soft-float for tuple.
Signed-off-by: Donald Hoskins <grommish@gmail.com>
Pass `--test` flag through rustdoc to rustc so `#[test]` functions can be scraped
As a part of stabilizing the scrape examples extension in Cargo, I uncovered a bug where examples cannot be scraped from tests. See this test: https://github.com/rust-lang/cargo/pull/10343/files#diff-27aa4f012ebfebaaee61498d91d2370de460628405d136b05e77efe61e044679R2496
The issue is that when rustdoc is run on a test file, because `--test` is not passed as a rustc option, then functions annotated with `#[test]` are ignored by the compiler. So this PR changes rustdoc so when `--test` is passed in conjunction with a `--scrape-example-<suffix>` flag, then the `test` field of `rustc_interface::Config` is true.
r? `@camelid`
Add more information to `impl Trait` error
Fixes#92458
Let me know if I went overboard here, or if the suggestions could use some refinement.
r? `@estebank`
Feel free to reassign to someone else
Add MemTagSanitizer Support
Add support for the LLVM [MemTagSanitizer](https://llvm.org/docs/MemTagSanitizer.html).
On hardware which supports it (see caveats below), the MemTagSanitizer can catch bugs similar to AddressSanitizer and HardwareAddressSanitizer, but with lower overhead.
On a tag mismatch, a SIGSEGV is signaled with code SEGV_MTESERR / SEGV_MTEAERR.
# Usage
`-Zsanitizer=memtag -C target-feature="+mte"`
# Comments/Caveats
* MemTagSanitizer is only supported on AArch64 targets with hardware support
* Requires `-C target-feature="+mte"`
* LLVM MemTagSanitizer currently only performs stack tagging.
# TODO
* Tests
* Example
Suggest `impl Trait` return type when incorrectly using a generic return type
Address #85991
When there is a type mismatch error and the return type is generic, and that generic parameter is not used in the function parameters, suggest replacing that generic with the `impl Trait` syntax.
r? `@estebank`
Address #85991
Suggest the `impl Trait` return type syntax if the user tried to return a generic parameter and we get a type mismatch
The suggestion is not emitted if the param appears in the function parameters, and only get the bounds that actually involve `T: ` directly
It also checks whether the generic param is contained in any where bound (where it isn't the self type), and if one is found (like `Option<T>: Send`), it is not suggested.
This also adds `TyS::contains`, which recursively vistits the type and looks if the other type is contained anywhere
Rollup of 6 pull requests
Successful merges:
- #92683 (Suggest copying trait associated type bounds on lifetime error)
- #92933 (Deny mixing bin crate type with lib crate types)
- #92959 (Add more info and suggestions to use of #[test] on invalid items)
- #93024 (Do not ICE when inlining a function with un-satisfiable bounds)
- #93613 (Move `{core,std}::stream::Stream` to `{core,std}::async_iter::AsyncIterator`)
- #93634 (compiler: clippy::complexity fixes)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Do not ICE when inlining a function with un-satisfiable bounds
Fixes#93008
This is kinda a hack... but it's the fix I thought had the least blast-radius.
We use `normalize_param_env_or_error` to verify that the predicates in the param env are self-consistent, since with RevealAll, a bad predicate like `<&'static () as Clone>` will be evaluated with an empty ParamEnv (since it references no generics), and we'll raise an error for it.
Add more info and suggestions to use of #[test] on invalid items
This pr changes the diagnostics for using `#[test]` on an item that can't be used as a test to explain that the attribute has no meaningful effect on non-functions and suggests the use of `#[cfg(test)]` for conditional compilation instead.
Example change:
```rs
#[test]
mod test {}
```
previously output
```
error: only functions may be used as tests
--> src/lib.rs:2:1
|
2 | mod test {}
| ^^^^^^^^^^^
```
now outputs
```
error: the `#[test]` attribute may only be used on a non-associated function
--> $DIR/test-on-not-fn.rs:3:1
|
LL | #[test]
| ^^^^^^^
LL | mod test {}
| ----------- expected a non-associated function, found a module
|
= note: the `#[test]` macro causes a a function to be run on a test and has no effect on non-functions
help: replace with conditional compilation to make the item only exist when tests are being run
|
LL | #[cfg(test)]
| ~~~~~~~~~~~~
```
Deny mixing bin crate type with lib crate types
The produced library would get a main shim too which conflicts with the
main shim of the executable linking the library.
```
$ cat > main1.rs <<EOF
fn main() {}
pub fn bar() {}
EOF
$ cat > main2.rs <<EOF
extern crate main1;
fn main() {
main1::bar();
}
EOF
$ rustc --crate-type bin --crate-type lib main1.rs
$ rustc -L. main2.rs
error: linking with `cc` failed: exit status: 1
[...]
= note: /usr/bin/ld: /tmp/crate_bin_lib/libmain1.rlib(main1.main1.707747aa-cgu.0.rcgu.o): in function `main':
main1.707747aa-cgu.0:(.text.main+0x0): multiple definition of `main'; main2.main2.02a148fe-cgu.0.rcgu.o:main2.02a148fe-cgu.0:(.text.main+0x0): first defined here
collect2: error: ld returned 1 exit status
```
Suggest copying trait associated type bounds on lifetime error
Closes#92033
Kind of the most simple suggestion to make - we don't try to be fancy. Turns out, it's still pretty useful (the couple existing tests that trigger this error end up fixed - for this error - upon applying the fix).
r? ``@estebank``
cc ``@nikomatsakis``
The `uninhabited_enum_branch` miropt now also checks whether the fallthrough
case is inhabited, and if not will ensure that it points to an unreachable
block.
rustdoc: Collect traits in scope for lang items
Inherent impls on primitive types are not included in the list of all inherent impls in the crate (`inherent_impls_in_crate_untracked`), they are taken from the list of lang items instead, but such impls can also be inlined by rustdoc, e.g. if something derefs to a primitive type.
r? `@camelid`
Fixes https://github.com/rust-lang/rust/issues/93698
Fix documentation for is_X_feature_detected!
These are now properly documented for all architectures and the
stability attributes in the docs are now correctly displayed.
This addresses this comment by `@ehuss:` https://github.com/rust-lang/rust/pull/90271#issuecomment-1038400916
cc `@adamgemmell`
Clippy: Don't lint `needless_borrow` in method receiver positions
r? `@Manishearth`
cc `@camsteffen` `@Jarcho`
cc rust-lang/rust-clippy#8441
Let's get this fix in before the beta branching tomorrow.
Fix ICE when using Box<T, A> with pointer sized A
Fixes#78459
Note that using `Box<T, A>` with a more than pointer sized `A` or using a pointer sized `A` with a Box of a DST will produce a different ICE (#92054) which is not fixed by this PR.
