This isn't really possible to test in an automatic way, since the only traits
you can negative impl are `Send` and `Sync`, and the implementors page for
those only exists in libstd.
Closes#21310
This isn't really possible to test in an automatic way, since the only traits
you can negative impl are `Send` and `Sync`, and the implementors page for
those only exists in libstd.
Closes#21310
This attribute has been deprecated in favor of #[should_panic]. This also
updates rustdoc to no longer accept the `should_fail` directive and instead
renames it to `should_panic`.
This attribute has been deprecated in favor of #[should_panic]. This also
updates rustdoc to no longer accept the `should_fail` directive and instead
renames it to `should_panic`.
This permits all coercions to be performed in casts, but adds lints to warn in those cases.
Part of this patch moves cast checking to a later stage of type checking. We acquire obligations to check casts as part of type checking where we previously checked them. Once we have type checked a function or module, then we check any cast obligations which have been acquired. That means we have more type information available to check casts (this was crucial to making coercions work properly in place of some casts), but it means that casts cannot feed input into type inference.
[breaking change]
* Adds two new lints for trivial casts and trivial numeric casts, these are warn by default, but can cause errors if you build with warnings as errors. Previously, trivial numeric casts and casts to trait objects were allowed.
* The unused casts lint has gone.
* Interactions between casting and type inference have changed in subtle ways. Two ways this might manifest are:
- You may need to 'direct' casts more with extra type information, for example, in some cases where `foo as _ as T` succeeded, you may now need to specify the type for `_`
- Casts do not influence inference of integer types. E.g., the following used to type check:
```
let x = 42;
let y = &x as *const u32;
```
Because the cast would inform inference that `x` must have type `u32`. This no longer applies and the compiler will fallback to `i32` for `x` and thus there will be a type error in the cast. The solution is to add more type information:
```
let x: u32 = 42;
let y = &x as *const u32;
```
Previously, impls for `[T; n]` were collected in the same place as impls for `[T]` and `&[T]`. This splits them out into their own primitive page in both core and std.
This is a [breaking-change]. When indexing a generic map (hashmap, etc) using the `[]` operator, it is now necessary to borrow explicitly, so change `map[key]` to `map[&key]` (consistent with the `get` routine). However, indexing of string-valued maps with constant strings can now be written `map["abc"]`.
r? @japaric
cc @aturon @Gankro
This commit:
* Introduces `std::convert`, providing an implementation of
RFC 529.
* Deprecates the `AsPath`, `AsOsStr`, and `IntoBytes` traits, all
in favor of the corresponding generic conversion traits.
Consequently, various IO APIs now take `AsRef<Path>` rather than
`AsPath`, and so on. Since the types provided by `std` implement both
traits, this should cause relatively little breakage.
* Deprecates many `from_foo` constructors in favor of `from`.
* Changes `PathBuf::new` to take no argument (creating an empty buffer,
as per convention). The previous behavior is now available as
`PathBuf::from`.
* De-stabilizes `IntoCow`. It's not clear whether we need this separate trait.
Closes#22751Closes#14433
[breaking-change]
Impls on `clean::Type::FixedVector` are now collected in the array
primitive page instead of the slice primitive page.
Also add a primitive docs for arrays to `std`.
* rustdoc was doubly appending the file name to the path of where to
generate the source files, meanwhile, the [src] hyperlinks were not
* Added a flag to rustdoc::html::render::clean_srcpath to ignore the
last path component, i.e. the file name itself to prevent the issue
* This also avoids creating directories with the same name as source
files, and it makes sure the link to `main.css` is correct as well.
* Added regression tests to ensure the rustdoc heirarchy of rendered
source files remains consistent
Fixes#23192
Previously it would fail on a trivial case like
/// Summary line
/// <trailing space>
/// Regular content
Compliant markdown preprocessor would render that as two separate paragraphs, but our summary line
extractor interprets both lines as the same paragraph and includes both into the short summary resulting in
This adds search by type (for functions/methods) support to Rustdoc. Target issue is at https://github.com/rust-lang/rfcs/issues/658.
I've described my approach here: https://github.com/rust-lang/rfcs/issues/658#issuecomment-76484200. I'll copy the text in here as well:
---
Hi, it took me longer than I wished, but I have implemented this in a not-too-complex way that I think can be extended to support more complex features (like the ones mentioned [here](https://github.com/rust-lang/rust/issues/12866#issuecomment-66945317)).
The idea is to generate a JSON representation of the types of methods/functions in the existing index, and then make the JS understand when it should look by type (and not by name).
I tried to come up with a JSON representation that can be extended to support generics, bounds, ref/mut annotations and so on. Here are a few samples:
Function:
```rust
fn to_uppercase(c: char) -> char
```
```json
{
"inputs": [
{"name": "char"}
],
"output": {
"name": "char",
}
}
```
Method (implemented or defined in trait):
```rust
// in struct Vec
// self is considered an argument as well
fn capacity(&self) -> usize
```
```json
{
"inputs": [
{"name": "vec"}
],
"output": {
"name": "usize"
}
}
```
This simple format can be extended by adding more fields, like `generic: bool`, a `bounds` mapping and so on.
I have a working implementation in https://github.com/rust-lang/rust/compare/master...mihneadb:rustdoc-search-by-type. You can check out a live demo [here](http://data.mihneadb.net/doc/std/index.html?search=charext%20-%3E%20char).
The feature list is not that long:
- search by types (you *can* use generics as well, as long as you use the exact name - e.g. [`vec,t -> `](http://data.mihneadb.net/doc/std/index.html?search=vec%2C%20t%20-%3E))
- order of arguments does not matter
- `self` is took into account as well (e.g. search for `vec -> usize`)
- does not use "complex" annotations (e.g. you don't search for `&char -> char` but for `char -> char`)
My goal is to get a working, minimal "base" merged so that others can build upon it. How should I proceed? Do I open a PR (badly in need of code review since this is my first non "hello world"-ish rust code)?
---
Previously it would fail on a trivial case like
/// Summary line
/// <trailing space>
/// Regular content
Compliant markdown preprocessor would render that as two separate paragraphs, but our summary line
extractor would interpret both lines as the same paragraph and include both into the short summary.
The new `std::io` module has had some time to bake now, and this commit
stabilizes its functionality. There are still portions of the module which
remain unstable, and below contains a summart of the actions taken.
This commit also deprecates the entire contents of the `old_io` module in a
blanket fashion. All APIs should now have a reasonable replacement in the
new I/O modules.
Stable APIs:
* `std::io` (the name)
* `std::io::prelude` (the name)
* `Read`
* `Read::read`
* `Read::{read_to_end, read_to_string}` after being modified to return a `usize`
for the number of bytes read.
* `ReadExt`
* `Write`
* `Write::write`
* `Write::{write_all, write_fmt}`
* `WriteExt`
* `BufRead`
* `BufRead::{fill_buf, consume}`
* `BufRead::{read_line, read_until}` after being modified to return a `usize`
for the number of bytes read.
* `BufReadExt`
* `BufReader`
* `BufReader::{new, with_capacity}`
* `BufReader::{get_ref, get_mut, into_inner}`
* `{Read,BufRead} for BufReader`
* `BufWriter`
* `BufWriter::{new, with_capacity}`
* `BufWriter::{get_ref, get_mut, into_inner}`
* `Write for BufWriter`
* `IntoInnerError`
* `IntoInnerError::{error, into_inner}`
* `{Error,Display} for IntoInnerError`
* `LineWriter`
* `LineWriter::{new, with_capacity}` - `with_capacity` was added
* `LineWriter::{get_ref, get_mut, into_inner}` - `get_mut` was added)
* `Write for LineWriter`
* `BufStream`
* `BufStream::{new, with_capacities}`
* `BufStream::{get_ref, get_mut, into_inner}`
* `{BufRead,Read,Write} for BufStream`
* `stdin`
* `Stdin`
* `Stdin::lock`
* `Stdin::read_line` - added method
* `StdinLock`
* `Read for Stdin`
* `{Read,BufRead} for StdinLock`
* `stdout`
* `Stdout`
* `Stdout::lock`
* `StdoutLock`
* `Write for Stdout`
* `Write for StdoutLock`
* `stderr`
* `Stderr`
* `Stderr::lock`
* `StderrLock`
* `Write for Stderr`
* `Write for StderrLock`
* `io::Result`
* `io::Error`
* `io::Error::last_os_error`
* `{Display, Error} for Error`
Unstable APIs:
(reasons can be found in the commit itself)
* `Write::flush`
* `Seek`
* `ErrorKind`
* `Error::new`
* `Error::from_os_error`
* `Error::kind`
Deprecated APIs
* `Error::description` - available via the `Error` trait
* `Error::detail` - available via the `Display` implementation
* `thread::Builder::{stdout, stderr}`
Changes in functionality:
* `old_io::stdio::set_stderr` is now a noop as the infrastructure for printing
backtraces has migrated to `std::io`.
[breaking-change]
The end result is that common fields (id, name, attributes, etc.) are stored in now-structures `ImplItem` and `TraitItem`.
The signature of a method is no longer duplicated between methods with a body (default/impl) and those without, they now share `MethodSig`.
This is also a [breaking-change] because of minor bugfixes and changes to syntax extensions:
* `pub fn` methods in a trait no longer parse - remove the `pub`, it has no meaning anymore
* `MacResult::make_methods` is now `make_impl_items` and the return type has changed accordingly
* `quote_method` is gone, because `P<ast::Method>` doesn't exist and it couldn't represent a full method anyways - could be replaced by `quote_impl_item`/`quote_trait_item` in the future, but I do hope we realize how silly that combinatorial macro expansion is and settle on a single `quote` macro + some type hints - or just no types at all (only token-trees)
r? @nikomatsakis This is necessary (hopefully also sufficient) for associated constants.
We require the *deferred* loading, not just an opportunistic
asynchronous loading. I think `<script defer>` is safe to use,
according to <http://caniuse.com/#feat=script-defer>.
This should fix#22615. Previously, the playpen links grabbed the content of all `.rusttest` containers on the same level to build the URL. Now they just select the one before the `pre` they are shown in.
I have only tested this by changing the file in my local build of the docs (not by running rustdoc itself).
It had been a source of huge bloat in rustdoc outputs. Of course, we can simply disable compiler docs (as `rustc` generates over 90M of HTML) but this approach fares better even after such decision.
Each directory now has `sidebar-items.js`, which immediately calls `initSidebarItems` with a JSON sidebar data. This file is shared throughout every item in the sidebar. The current item is highlighted via a separate JS snippet (`window.sidebarCurrent`). The JS file is designed to be loaded asynchronously, as the sidebar is rendered before the content and slow sidebar loading blocks the entire rendering. For the minimal accessibility without JS, links to the parent items are left in HTML.
In the future, it might also be possible to integrate crates data with the same fashion: `sidebar-items.js` at the root path will do that. (Currently rustdoc skips writing JS in that case.)
This has a huge impact on the size of rustdoc outputs. Originally it was 326MB uncompressed (37.7MB gzipped, 6.1MB xz compressed); it is 169MB uncompressed (11.9MB gzipped, 5.9MB xz compressed) now. The sidebar JS only takes 10MB uncompressed & 0.3MB gzipped.
The two main sub-modules, `c_str` and `os_str`, have now had some time to bake
in the standard library. This commits performs a sweep over the modules adding
various stability tags.
The following APIs are now marked `#[stable]`
* `OsString`
* `OsStr`
* `OsString::from_string`
* `OsString::from_str`
* `OsString::new`
* `OsString::into_string`
* `OsString::push` (renamed from `push_os_str`, added an `AsOsStr` bound)
* various trait implementations for `OsString`
* `OsStr::from_str`
* `OsStr::to_str`
* `OsStr::to_string_lossy`
* `OsStr::to_os_string`
* various trait implementations for `OsStr`
* `CString`
* `CStr`
* `NulError`
* `CString::new` - this API's implementation may change as a result of
rust-lang/rfcs#912 but the usage of `CString::new(thing)` looks like it is
unlikely to change. Additionally, the `IntoBytes` bound is also likely to
change but the set of implementors for the trait will not change (despite the
trait perhaps being renamed).
* `CString::from_vec_unchecked`
* `CString::as_bytes`
* `CString::as_bytes_with_nul`
* `NulError::nul_position`
* `NulError::into_vec`
* `CStr::from_ptr`
* `CStr::as_ptr`
* `CStr::to_bytes`
* `CStr::to_bytes_with_nul`
* various trait implementations for `CStr`
The following APIs remain `#[unstable]`
* `OsStr*Ext` traits remain unstable as the organization of `os::platform` is
uncertain still and the traits may change location.
* `AsOsStr` remains unstable as generic conversion traits are likely to be
rethought soon.
The following APIs were deprecated
* `OsString::push_os_str` is now called `push` and takes `T: AsOsStr` instead (a
superset of the previous functionality).
It had been a source of huge bloat in rustdoc outputs. Of course,
we can simply disable compiler docs (as `rustc` generates over 90M
of HTML) but this approach fares better even after such decision.
Each directory now has `sidebar-items.js`, which immediately calls
`initSidebarItems` with a JSON sidebar data. This file is shared
throughout every item in the sidebar. The current item is
highlighted via a separate JS snippet (`window.sidebarCurrent`).
The JS file is designed to be loaded asynchronously, as the sidebar
is rendered before the content and slow sidebar loading blocks
the entire rendering. For the minimal accessibility without JS,
links to the parent items are left in HTML.
In the future, it might also be possible to integrate crates data
with the same fashion: `sidebar-items.js` at the root path will do
that. (Currently rustdoc skips writing JS in that case.)
This has a huge impact on the size of rustdoc outputs. Originally
it was 326MB uncompressed (37.7MB gzipped, 6.1MB xz compressed);
it is 169MB uncompressed (11.9MB gzipped, 5.9MB xz compressed) now.
The sidebar JS only takes 10MB uncompressed & 0.3MB gzipped.
This commit deprecates the majority of std::old_io::fs in favor of std::fs and
its new functionality. Some functions remain non-deprecated but are now behind a
feature gate called `old_fs`. These functions will be deprecated once
suitable replacements have been implemented.
The compiler has been migrated to new `std::fs` and `std::path` APIs where
appropriate as part of this change.
