test: enable `unpacked-lto` tests
This enables the correct `unpacked-lto` tests.
Not sure whether `.o` should be removed.
They are bitcode for linker-plugin-lto, though there might be some `.o` for `#[no_builtins]`?
rename 'try' intrinsic to 'catch_unwind'
The intrinsic has nothing to do with `try` blocks, and corresponds to the stable `catch_unwind` function, so this makes a lot more sense IMO.
Also rename Miri's special function while we are at it, to reflect the level of abstraction it works on: it's an unwinding mechanism, on which Rust implements panics.
Allow tests to specify a `//@ filecheck-flags:` header
This allows individual codegen/assembly/mir-opt tests to pass extra flags to the LLVM `filecheck` tool as needed.
---
The original motivation was noticing that `tests/run-make/instrument-coverage` was very close to being an ordinary codegen test, except that it needs some extra logic to set up platform-specific variables to be passed into filecheck.
I then saw the comment in `verify_with_filecheck` indicating that a `filecheck-flags` header might be useful for other purposes as well.
Always use WaitOnAddress on Win10+
`WaitOnAddress` and `WakeByAddressSingle` are always available since Windows 8 so they can now be used without needing to delay load. I've also moved the Windows 7 thread parking fallbacks into a separate sub-module.
This test was already very close to being an ordinary codegen test, except that
it needed some extra logic to set a few variables based on (target) platform
characteristics.
Now that we have support for `//@ filecheck-flags:`, we can instead set those
variables using the normal test revisions mechanism.
llvm: change data layout bug to an error and make it trigger more
Fixes#33446.
Don't skip the inconsistent data layout check for custom LLVMs or non-built-in targets.
With #118708, all targets will have a simple test that would trigger this error if LLVM's data layouts do change - so data layouts would be corrected during the LLVM upgrade. Therefore, with builtin targets, this error won't happen with our LLVM because each target will have been confirmed to work. With non-builtin targets, this error is probably useful to have because you can change the data layout in your target and if it is wrong then that could lead to bugs.
When using a custom LLVM, the same justification makes sense for non-builtin targets as with our LLVM, the user can update their target to match their LLVM and that's probably a good thing to do. However, with a custom LLVM, the user cannot change the builtin target data layouts if they don't match - though given that the compiler's data layout is used for layout computation and a bunch of other things - you could get some bugs because of the mismatch and probably want to know about that. I'm not sure if this is something that people do and is okay, but I doubt it?
`CFG_LLVM_ROOT` was also always set during local development with `download-ci-llvm` so this bug would never trigger locally.
In #33446, two points are raised:
- In the issue itself, changing this from a `bug!` to a proper error is what is suggested, by using `isCompatibleDataLayout` from LLVM, but that function still just does the same thing that we do and check for equality, so I've avoided the additional code necessary to do that FFI call.
- `@Mark-Simulacrum` suggests a different check is necessary to maintain backwards compatibility with old LLVM versions. I don't know how often this comes up, but we can do that with some simple string manipulation + LLVM version checks as happens already for LLVM 17 just above this diff.
Don't skip the inconsistent data layout check for custom LLVMs.
With #118708, all targets will have a simple test that would trigger this
check if LLVM's data layouts do change - so data layouts would be
corrected during the LLVM upgrade. Therefore, with builtin targets, this
check won't trigger with our LLVM because each target will have been
confirmed to work. With non-builtin targets, this check is probably
useful to have because you can change the data layout in your target and
if its wrong then that could lead to bugs.
When using a custom LLVM, the same justification makes sense for
non-builtin targets as with our LLVM, the user can update their target to
match their LLVM and that's probably a good thing to do. However, with
a custom LLVM, the user cannot change the builtin target data layouts if
they don't match - though given that the compiler's data layout is used
for layout computation and a bunch of other things - you could get some
bugs because of the mismatch and probably want to know about that.
`CFG_LLVM_ROOT` was also always set during local development with
`download-ci-llvm` so this bug would never trigger locally.
Signed-off-by: David Wood <david@davidtw.co>
libtest: Fix padding of benchmarks run as tests
### Summary
The first commit adds regression tests for libtest padding.
The second commit fixes padding for benches run as tests and updates the blessed output of the regression tests to make it clear what effect the fix has on padding.
Closes#104092 which is **E-help-wanted** and **regression-from-stable-to-stable**
### More details
Before this fix we applied padding _before_ manually doing what `convert_benchmarks_to_tests()` does which affects padding calculations. Instead use `convert_benchmarks_to_tests()` first if applicable and then apply padding afterwards so it becomes correct.
Benches should only be padded when run as benches to make it easy to compare the benchmark numbers. Not when run as tests.
r? `@ghost` until CI passes.
The output is produced by printf from C code in these cases, and printf prints in text mode, which means `\n` will be printed as `\r\n` on Windows.
In --bless mode the new output with `\r\n` will replace expected output in `tests/run-make/raw-dylib-*\output.txt` files, which use \n, always resulting in dirty files in the repo.
`tokenstream::Spacing` appears on all `TokenTree::Token` instances,
both punct and non-punct. Its current usage:
- `Joint` means "can join with the next token *and* that token is a
punct".
- `Alone` means "cannot join with the next token *or* can join with the
next token but that token is not a punct".
The fact that `Alone` is used for two different cases is awkward.
This commit augments `tokenstream::Spacing` with a new variant
`JointHidden`, resulting in:
- `Joint` means "can join with the next token *and* that token is a
punct".
- `JointHidden` means "can join with the next token *and* that token is a
not a punct".
- `Alone` means "cannot join with the next token".
This *drastically* improves the output of `print_tts`. For example,
this:
```
stringify!(let a: Vec<u32> = vec![];)
```
currently produces this string:
```
let a : Vec < u32 > = vec! [] ;
```
With this PR, it now produces this string:
```
let a: Vec<u32> = vec![] ;
```
(The space after the `]` is because `TokenTree::Delimited` currently
doesn't have spacing information. The subsequent commit fixes this.)
The new `print_tts` doesn't replicate original code perfectly. E.g.
multiple space characters will be condensed into a single space
character. But it's much improved.
`print_tts` still produces the old, uglier output for code produced by
proc macros. Because we have to translate the generated code from
`proc_macro::Spacing` to the more expressive `token::Spacing`, which
results in too much `proc_macro::Along` usage and no
`proc_macro::JointHidden` usage. So `space_between` still exists and
is used by `print_tts` in conjunction with the `Spacing` field.
This change will also help with the removal of `Token::Interpolated`.
Currently interpolated tokens are pretty-printed nicely via AST pretty
printing. `Token::Interpolated` removal will mean they get printed with
`print_tts`. Without this change, that would result in much uglier
output for code produced by decl macro expansions. With this change, AST
pretty printing and `print_tts` produce similar results.
The commit also tweaks the comments on `proc_macro::Spacing`. In
particular, it refers to "compound tokens" rather than "multi-char
operators" because lifetimes aren't operators.
Avoid adding builtin functions to `symbols.o`
We found performance regressions in #113923. The problem seems to be that `--gc-sections` does not remove these symbols. I tested that lld removes these symbols, but ld and gold do not.
I found that `used` adds symbols to `symbols.o` at 3e202ead60/compiler/rustc_codegen_ssa/src/back/linker.rs (L1786-L1791).
The PR removes builtin functions.
Note that under LTO, ld still preserves these symbols. (lld will still remove them.)
The first commit also fixes#118559. But I think the second commit also makes sense.
Before this fix we applied padding before manually doing what
`convert_benchmarks_to_tests()` does. Instead use
`convert_benchmarks_to_tests()` if applicable and then apply padding
afterwards so it becomes correct. (Benches should only be padded when
run as benches to make it easy to compare the benchmark numbers.)
`build_session` is passed an `EarlyErrorHandler` and then constructs a
`Handler`. But the `EarlyErrorHandler` is still used for some time after
that.
This commit changes `build_session` so it consumes the passed
`EarlyErrorHandler`, and also drops it as soon as the `Handler` is
built. As a result, `parse_cfg` and `parse_check_cfg` now take a
`Handler` instead of an `EarlyErrorHandler`.
Report errors in jobserver inherited through environment variables
This pr attempts to catch situations, when jobserver exists, but is not being inherited.
r? `@petrochenkov`
As you can see the padding is wrong when running benches as tests. This
will be fixed in the next commit. (Benches should only be padded when
run as benches to make it easy to compare the benchmark numbers.)
Restore `#![no_builtins]` crates participation in LTO.
After #113716, we can make `#![no_builtins]` crates participate in LTO again.
`#![no_builtins]` with LTO does not result in undefined references to the error. I believe this type of issue won't happen again.
Fixes#72140. Fixes#112245. Fixes#110606. Fixes#105734. Fixes#96486. Fixes#108853. Fixes#108893. Fixes#78744. Fixes#91158. Fixes https://github.com/rust-lang/cargo/issues/10118. Fixes https://github.com/rust-lang/compiler-builtins/issues/347.
The `nightly-2023-07-20` version does not always reproduce problems due to changes in compiler-builtins, core, and user code. That's why this issue recurs and disappears.
Some issues were not tested due to the difficulty of reproducing them.
r? pnkfelix
cc `@bjorn3` `@japaric` `@alexcrichton` `@Amanieu`
Added linker_arg(s) Linker trait methods for link-arg to be prefixed "-Wl," for cc-like linker args and not verbatim
https://github.com/rust-lang/rust/issues/99427#issuecomment-1234443468
> here's one possible improvement to -l link-arg making it more portable between linkers and useful - befriending it with the verbatim modifier (https://github.com/rust-lang/rust/issues/99425).
>
> -l link-arg:-verbatim=-foo would add -Wl,-foo (or equivalent) when C compiler is used as a linker, and just -foo when bare linker is used.
> -l link-arg:+verbatim=-bar on the other hand would always pass just -bar.
They've been deprecated for four years.
This commit includes the following changes.
- It eliminates the `rustc_plugin_impl` crate.
- It changes the language used for lints in
`compiler/rustc_driver_impl/src/lib.rs` and
`compiler/rustc_lint/src/context.rs`. External lints are now called
"loaded" lints, rather than "plugins" to avoid confusion with the old
plugins. This only has a tiny effect on the output of `-W help`.
- E0457 and E0498 are no longer used.
- E0463 is narrowed, now only relating to unfound crates, not plugins.
- The `plugin` feature was moved from "active" to "removed".
- It removes the entire plugins chapter from the unstable book.
- It removes quite a few tests, mostly all of those in
`tests/ui-fulldeps/plugin/`.
Closes#29597.
Allow target specs to use an LLD flavor, and self-contained linking components
This PR allows:
- target specs to use an LLD linker-flavor: this is needed to switch `x86_64-unknown-linux-gnu` to using LLD, and is currently not possible because the current flavor json serialization fails to roundtrip on the modern linker-flavors. This can e.g. be seen in https://github.com/rust-lang/rust/pull/115622#discussion_r1321312880 which explains where an `Lld::Yes` is ultimately deserialized into an `Lld::No`.
- target specs to declare self-contained linking components: this is needed to switch `x86_64-unknown-linux-gnu` to using `rust-lld`
- adds an end-to-end test of a custom target json simulating `x86_64-unknown-linux-gnu` being switched to using `rust-lld`
- disables codegen backends from participating because they don't support `-Zgcc-ld=lld` which is the basis of mcp510.
r? `@petrochenkov:` if the approach discussed https://github.com/rust-lang/rust/pull/115622#discussion_r1329403467 and on zulip would work for you: basically, see if we can emit only modern linker flavors in the json specs, but accept both old and new flavors while reading them, to fix the roundtrip issue.
The backwards compatible `LinkSelfContainedDefault` variants are still serialized and deserialized in `crt-objects-fallback`, while the spec equivalent of e.g. `-Clink-self-contained=+linker` is serialized into a different json object (with future-proofing to incorporate `crt-objects-fallback` in the future).
---
I've been test-driving this in https://github.com/rust-lang/rust/pull/113382 to test actually switching `x86_64-unknown-linux-gnu` to `rust-lld` (and fix what needs to be fixed in CI, bootstrap, etc), and it seems to work fine.
Chrome links .rlibs with /WHOLEARCHIVE or -Wl,--whole-archive to prevent
the linker from discarding static initializers. This works well, except
on Windows x86, where lld complains:
error: /safeseh: lib.rmeta is not compatible with SEH
The fix is simply to mark the .rmeta as SAFESEH aware. This is trivially
true, since the metadata file does not contain any executable code.
Most coverage metadata is encoded into two sections in the final executable.
The `__llvm_covmap` section mostly just contains a list of filenames, while the
`__llvm_covfun` section contains encoded coverage maps for each instrumented
function.
The catch is that each per-function record also needs to contain a hash of the
filenames list that it refers to. Historically this was handled by assembling
most of the per-function data into a temporary list, then assembling the
filenames buffer, then using the filenames hash to emit the per-function data,
and then finally emitting the filenames table itself.
However, now that we build the filenames table up-front (via a separate
traversal of the per-function data), we can hash and emit that part first, and
then emit each of the per-function records immediately after building. This
removes the awkwardness of having to temporarily store nearly-complete
per-function records.
Mention the syntax for `use` on `mod foo;` if `foo` doesn't exist
Newcomers might get confused that `mod` is the only way of defining scopes, and that it can be used as if it were `use`.
Fix#69492.
Implement rustc part of RFC 3127 trim-paths
This PR implements (or at least tries to) [RFC 3127 trim-paths](https://github.com/rust-lang/rust/issues/111540), the rustc part. That is `-Zremap-path-scope` with all of it's components/scopes.
`@rustbot` label: +F-trim-paths
Use `YYYY-MM-DDTHH_MM_SS` as datetime format for ICE dump files
Windows paths do not support `:`, so use a datetime format in ICE dump paths that Windows will accept.
CC #116809, fix#115180.
MacOS (and all apple targets) have -Csplit-debuginfo=packed as default
instead of "off" like all other targets (well there is Windows, but we
don't test it in those tests), also -Csplit-debuginfo is not stable on
all targets so we only set in on Darwin where is matters.
When building with LTO, builtin functions that are defined but whose calls have not been inserted yet, get internalized.
We need to prevent these symbols from being internalized at LTO time.
Refer to https://reviews.llvm.org/D49434.
After #113716, we can make `#![no_builtins]` crates participate in LTO again.
`#![no_builtins]` with LTO does not result in undefined references to the error.
The `rustc_span::FileName` enum already differentiates between real
files and "fake" files such as `<anon>`. We do not need to artificially
forbid real file names from ending in `>`.
stabilize combining +bundle and +whole-archive link modifiers
Per discussion on https://github.com/rust-lang/rust/issues/108081 combining +bundle and +whole-archive already works and can be stabilized independently of other aspects of the packed_bundled_libs feature. There is no risk of regression because this was not previously allowed.
r? `@petrochenkov`
Raise minimum supported Apple OS versions
This implements the proposal to raise the minimum supported Apple OS versions as laid out in the now-completed MCP (https://github.com/rust-lang/compiler-team/issues/556).
As of this PR, rustc and the stdlib now support these versions as the baseline:
- macOS: 10.12 Sierra
- iOS: 10
- tvOS: 10
- watchOS: 5 (Unchanged)
In addition to everything this breaks indirectly, these changes also erase the `armv7-apple-ios` target (currently tier 3) because the oldest supported iOS device now uses ARMv7s. Not sure what the policy around tier3 target removal is but shimming it is not an option due to the linker refusing.
[Per comment](https://github.com/rust-lang/compiler-team/issues/556#issuecomment-1297175073), this requires a FCP to merge. cc `@wesleywiser.`
[breaking change] Validate crate name in `--extern` [MCP 650]
Reject non-ASCII-identifier crate names passed to the CLI option `--extern` (`rustc`, `rustdoc`).
Implements [MCP 650](https://github.com/rust-lang/compiler-team/issues/650) (except that we only allow ASCII identifiers not arbitrary Rust identifiers).
Fixes#113035.
[As mentioned on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Disallow.20non-identifier-valid.20--extern.20cr.E2.80.A6.20compiler-team.23650/near/376826988), doing a crater run probably doesn't make sense since it wouldn't yield anything. Most users don't interact with `rustc` directly but only ever through Cargo which always passes a valid crate name to `--extern` when it invokes `rustc` and `rustdoc`. In any case, the user wouldn't be able to use such a crate name in the source code anyway.
Note that I'm not using [`rustc_session::output::validate_crate_name`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_session/output/fn.validate_crate_name.html) (used for `--crate-name` and `#![crate_name]`) since the latter doesn't reject non-ASCII crate names and ones that start with a digit.
As an aside, I've also thought about getting rid of `validate_crate_name` entirely in a separate PR (with another MCP) in favor of `is_ascii_ident` to reject more weird `--crate-name`s, `#![crate_name]`s and file names but I think that would lead to a lot of actual breakage, namely because of file names starting with a digit. In `tests/ui` 9 tests would be impacted for example.
CC `@estebank`
r? `@est31`
Don't modify libstd to dump rustc ICEs
Do a much simpler thing and just dump a `std::backtrace::Backtrace` to file.
r? `@estebank` `@oli-obk`
Fixes#115610
Make `.rmeta` file in `dep-info` have correct name (`lib` prefix)
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for the name of the metadata file, the `.d` file contained a file name different from the actual name used. Share the logic to fix the out-of-sync name.
Without this fix, the `.d` file contained
dash-separated_something-extra.rmeta: dash-separated.rs
instead of
libdash_separated_something-extra.rmeta: dash-separated.rs
which is the name of the file that is actually written by the compiler.
Worth noting: It took me several iterations to get all tests to pass, so I am relatively confident that this PR does not break anything.
Closes#68839
Using `ld.lld` may have been clever, but that was getting the /system/
ld.lld, not one we may have built as part of building llvm. By using the
warning message coming directly from rustc we now correctly skip the
zlib and zstd tests when the support is missing.
LLVM already supports emitting compressed debuginfo. In debuginfo=full
builds, the debug section is often a large amount of data, and it
typically compresses very well (3x is not unreasonable.) We add a new
knob to allow debuginfo to be compressed when the matching LLVM
functionality is present. Like clang, if a known-but-disabled
compression mechanism is requested, we disable compression and emit
uncompressed debuginfo sections.
The API is different enough on older LLVMs we just pretend the support
is missing on LLVM older than 16.
Add CL and CMD into to pdb debug info
Partial fix for https://github.com/rust-lang/rust/issues/96475
The Arg0 and CommandLineArgs of the MCTargetOptions cpp class are not set within bb548f9645/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L378)
This causes LLVM to not neither output any compiler path (cl) nor the arguments that were used when invoking it (cmd) in the PDB file.
This fix adds the missing information to the target machine so LLVM can use it.
Description of the `PATH` option:
> A filepath may optionally be specified for each requested information
> kind, in the format `--print KIND=PATH`, just like for `--emit`. When
> a path is specified, information will be written there instead of to
> stdout.
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for
the name of the metadata file, the `.d` file contained a file name
different from the actual name used. Share the logic to fix the
out-of-sync name.
Closes 68839.
Rustdoc: Add unstable --no-html-source flag
Fixes https://github.com/rust-lang/rust/issues/115060.
This is the equivalent of `#![doc(no_html_source)]` but on the command-line. It disables the generation of the source pages (and of the links pointing to them as well).
The motivation behind this is to enable to reduce documentation size when generating it in some locations without enforcing this to end users or adding a new feature to enable/disable the crate attribute.
r? `@notriddle`
Add MIR validation for unwind out from nounwind functions + fixes to make validation pass
`@Nilstrieb` This is the MIR validation you asked in https://github.com/rust-lang/rust/pull/112403#discussion_r1222739722.
Two passes need to be fixed to get the validation to pass:
* `RemoveNoopLandingPads` currently unconditionally introduce a resume block (even there is none to begin with!), changed to not do that
* Generator state transform introduces a `assert` which may unwind, and its drop elaboration also introduces many new `UnwindAction`s, so in this case run the AbortUnwindingCalls after the transformation.
I believe this PR should also fixRust-for-Linux/linux#1016, cc `@ojeda`
r? `@Nilstrieb`
rustdoc: Fixes with --test-run-directory and relative paths.
Fixes#112191Fixes#112210
This fixes some issues with `--test-run-directory` and its interaction with `--runtool` and `--persist-doctests`. Relative directories don't work with `Command::current_dir` very well because it has platform-specific behavior with relative paths. This fixes it by avoiding the use of relative paths.
This is needed because cargo is switching to use `--test-run-directory`, and it uses relative paths when interacting with rustdoc/rustc.
Currently, combining +bundle and +whole-archive works only with
#![feature(packed_bundled_libs)]
This crate feature is independent of the -Zpacked-bundled-libs
command line option.
This commit stabilizes the #![feature(packed_bundled_libs)] crate
feature and implicitly enables it only when the +bundle and
+whole-archive link modifiers are combined. This allows rlib
crates to use the +whole-archive link modifier with native
libraries and have all symbols included in the linked library
to be included in downstream staticlib crates that use the rlib as
a dependency. Other cases requiring the packed_bundled_libs
behavior still require the -Zpacked-bundled-libs command line
option, which can be stabilized independently in the future.
Per discussion on https://github.com/rust-lang/rust/issues/108081
there is no risk of regression stabilizing the crate feature in
this way because the combination of +bundle,+whole-archive link
modifiers was previously not allowed.
Add hotness data to LLVM remarks
Slight improvement of https://github.com/rust-lang/rust/pull/113040. This makes sure that if PGO is used, remarks generated using `-Zremark-dir` will include the `Hotness` attribute.
r? `@tmiasko`
Fix missing dependency file with `-Zunpretty`
This PR force the `output_filenames` to be run ~~in every early exits like~~ when using `-Zunpretty`, so to respect the `dep-info` flag.
Fixes https://github.com/rust-lang/rust/issues/112898
r? `@oli-obk`
It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
Change default panic handler message format.
This changes the default panic hook's message format from:
```
thread '{thread}' panicked at '{message}', {location}
```
to
```
thread '{thread}' panicked at {location}:
{message}
```
This puts the message on its own line without surrounding quotes, making it easiser to read. For example:
Before:
```
thread 'main' panicked at 'env variable `IMPORTANT_PATH` should be set by `wrapper_script.sh`', src/main.rs:4:6
```
After:
```
thread 'main' panicked at src/main.rs:4:6:
env variable `IMPORTANT_PATH` should be set by `wrapper_script.sh`
```
---
See this PR by `@nyurik,` which does that for only multi-line messages (specifically because of `assert_eq`): https://github.com/rust-lang/rust/pull/111071
This is the change that does that for *all* panic messages.
The test fails on Windows with the diff
- = help: to create the module `unknown`, create file "unknown.rs" or "unknown/mod.rs"
+ = help: to create the module `unknown`, create file "unknown.rs" or "unknown\mod.rs"
There is no need to run this test on Windows, so ignore it.
Fix ice tests when librustc-driver is linked dynamically
Running `dump-ice-to-disk`and `short-ice` tests on Linux targeting `x86_64-fortanix-unknown-sgx` platform results in:
```
jenkins@31cf43196355:~/workspace/rust-sgx-ci/Raoul/rust$ cat /home/jenkins/workspace/rust-sgx-ci/Raoul/rust/build/x86_64-unknown-linux-gnu/test/run-make/dump-ice-to-disk/dump-ice-to-disk/*
/home/jenkins/workspace/rust-sgx-ci/Raoul/rust/build/x86_64-unknown-linux-gnu/stage1/bin/rustc: error while loading shared libraries: librustc_driver-fa98927b935b2881.so: cannot open shared object file: No such file or directory
/home/jenkins/workspace/rust-sgx-ci/Raoul/rust/build/x86_64-unknown-linux-gnu/stage1/bin/rustc: error while loading shared libraries: librustc_driver-fa98927b935b2881.so: cannot open shared object file: No such file or directory
/home/jenkins/workspace/rust-sgx-ci/Raoul/rust/build/x86_64-unknown-linux-gnu/stage1/bin/rustc: error while loading shared libraries: librustc_driver-fa98927b935b2881.so: cannot open shared object file: No such file or directory
/home/jenkins/workspace/rust-sgx-ci/Raoul/rust/build/x86_64-unknown-linux-gnu/stage1/bin/rustc: error while loading shared libraries: librustc_driver-fa98927b935b2881.so: cannot open shared object file: No such file or directory
```
Setting the LD_LIBRARY_PATH explicitly to `$(HOST_RPATH_DIR)` in these tests Makefiles resolves the issue. The `thumb-none-qemu` and `thumb-none-cortex-m` run-make tests do something similar.
cc: ```@jethrogb``` ```@vn971``` ```@mkaynov```
Update the minimum external LLVM to 15
With this change, we'll have stable support for LLVM 15 through 17 (pending release).
For reference, the previous increase to LLVM 14 was #107573.
Both GCC and Clang write by default a `.comment` section with compiler
information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only
when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
In the RFC part of this PR it was decided to always add
the information, which gets us closer to other popular compilers.
An opt-out flag like GCC and Clang may be added later on if deemed
necessary.
Implementation-wise, this covers both `ModuleLlvm::new()` and
`ModuleLlvm::new_metadata()` cases by moving the addition to
`context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in
temporary outputs), so this deduplicates it like it is done for
`wasm.custom_sections`. The tests also check this duplication does
not take place.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `--print KIND=PATH` command line syntax
As is already done for `--emit KIND=PATH` and `-L KIND=PATH`.
In the discussion of #110785, it was pointed out that `--print KIND=PATH` is nicer than trying to apply the single global `-o` path to `--print`'s output, because in general there can be multiple print requests within a single rustc invocation, and anyway `-o` would already be used for a different meaning in the case of `link-args` and `native-static-libs`.
I am interested in using `--print cfg=PATH` in Buck2. Currently Buck2 works around the lack of support for `--print KIND=PATH` by [indirecting through a Python wrapper script](d43cf3a51a/prelude/rust/tools/get_rustc_cfg.py) to redirect rustc's stdout into the location dictated by the build system.
From skimming Cargo's usages of `--print`, it definitely seems like it would benefit from `--print KIND=PATH` too. Currently it is working around the lack of this by inserting `--crate-name=___ --print=crate-name` so that it can look for a line containing `___` as a delimiter between the 2 other `--print` informations it actually cares about. This is commented as a "HACK" and "abuse". 31eda6f7c3/src/cargo/core/compiler/build_context/target_info.rs (L242) (FYI `@weihanglo` as you dealt with this recently in https://github.com/rust-lang/cargo/pull/11633.)
Mentioning reviewers active in #110785: `@fee1-dead` `@jyn514` `@bjorn3`
Verify that all crate sources are in sync
This ensures that rustc will not attempt to link against a cdylib as if it is a rust dylib when an rlib for the same crate is available. Previously rustc didn't actually check if any further formats of a crate which has been loaded are of the same version and if they are actually valid. This caused a cdylib to be interpreted as rust dylib as soon as the corresponding rlib was loaded. As cdylibs don't export any rust symbols, linking would fail if rustc decides to link against the cdylib rather than the rlib.
Two crates depended on the previous behavior by separately compiling a test crate as both rlib and dylib. These have been changed to capture their original spirit to the best of my ability while still working when rustc verifies that all crates are in sync. It is unlikely that build systems depend on the current behavior and in any case we are taking a lot of measures to ensure that any change to either the source or the compilation options (including crate type) results in rustc rejecting it as incompatible. We merely didn't do this check here for now obsolete perf reasons.
Fixes https://github.com/rust-lang/rust/issues/10786
Fixes https://github.com/rust-lang/rust/issues/82151
Fixes https://github.com/rust-lang/rust/issues/82972
Closes https://github.com/bevy-cheatbook/bevy-cheatbook/issues/114
On nightly, dump ICE backtraces to disk
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic handler will also write the contents of the backtrace to disk. If any `delay_span_bug`s are encountered, their backtrace is also added to the file. The platform and rustc version will also be collected.
<img width="1032" alt="Screenshot 2023-03-03 at 2 13 25 PM" src="https://user-images.githubusercontent.com/1606434/222842420-8e039740-4042-4563-b31d-599677171acf.png">
The current behavior will *always* write to disk on nightly builds, regardless of whether the backtrace is printed to the terminal, unless the environment variable `RUSTC_ICE_DISK_DUMP` is set to `0`. This is a compromise and can be changed.
This ensures that rustc will not attempt to link against a cdylib as if
it is a rust dylib when an rlib for the same crate is available.
Previously rustc didn't actually check if any further formats of a
crate which has been loaded are of the same version and if they are
actually valid. This caused a cdylib to be interpreted as rust dylib as
soon as the corresponding rlib was loaded. As cdylibs don't export any
rust symbols, linking would fail if rustc decides to link against the
cdylib rather than the rlib.
Two crates depended on the previous behavior by separately compiling a
test crate as both rlib and dylib. These have been changed to capture
their original spirit to the best of my ability while still working
when rustc verifies that all crates are in sync. It is unlikely that
build systems depend on the current behavior and in any case we are
taking a lot of measures to ensure that any change to either the source
or the compilation options (including crate type) results in rustc
rejecting it as incompatible. We merely didn't do this check here for
now obsolete perf reasons.
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic
handler will also write the contents of the backtrace to disk. If any
`delay_span_bug`s are encountered, their backtrace is also added to the
file. The platform and rustc version will also be collected.
De-duplicate consecutive libs when printing native-static-libs
This PR adds a de-duplicate step just before printing the `native-static-libs`.
This step de-duplicates all the consecutive libs based only on the relevant comparison elements (this exclude spans, ast elements, ...).
Fixes https://github.com/rust-lang/rust/issues/113209
Resurrect: rustc_target: Add alignment to indirectly-passed by-value types, correcting the alignment of byval on x86 in the process.
Same as #111551, which I [accidentally closed](https://github.com/rust-lang/rust/pull/111551#issuecomment-1571222612) :/
---
This resurrects PR #103830, which has sat idle for a while.
Beyond #103830, this also:
- fixes byval alignment for types containing vectors on Darwin (see `tests/codegen/align-byval-vector.rs`)
- fixes byval alignment for overaligned types on x86 Windows (see `tests/codegen/align-byval.rs`)
- fixes ABI for types with 128bit requested alignment on ARM64 Linux (see `tests/codegen/aarch64-struct-align-128.rs`)
r? `@nikic`
---
`@pcwalton's` original PR description is reproduced below:
Commit 88e4d2c from five years ago removed
support for alignment on indirectly-passed arguments because of problems with
the `i686-pc-windows-msvc` target. Unfortunately, the `memcpy` optimizations I
recently added to LLVM 16 depend on this to forward `memcpy`s. This commit
attempts to fix the problems with `byval` parameters on that target and now
correctly adds the `align` attribute.
The problem is summarized in [this comment] by `@eddyb.` Briefly, 32-bit x86 has
special alignment rules for `byval` parameters: for the most part, their
alignment is forced to 4. This is not well-documented anywhere but in the Clang
source. I looked at the logic in Clang `TargetInfo.cpp` and tried to replicate
it here. The relevant methods in that file are
`X86_32ABIInfo::getIndirectResult()` and
`X86_32ABIInfo::getTypeStackAlignInBytes()`. The `align` parameter attribute
for `byval` parameters in LLVM must match the platform ABI, or miscompilations
will occur. Note that this doesn't use the approach suggested by eddyb, because
I felt it was overkill to store the alignment in `on_stack` when special
handling is really only needed for 32-bit x86.
As a side effect, this should fix#80127, because it will make the `align`
parameter attribute for `byval` parameters match the platform ABI on LLVM
x86-64.
[this comment]: #80822 (comment)
...which seems not to be available on some platforms.
Or maybe it is under a different name but I don't want to deal with that
Instead, use two u64s. This isn't exactly the same, but we already have
some coverage of the packed u128 case in another test, so it's not
essential to have it here.
From the test logs, other extern-fn-* tests have this:
[run-make] tests/run-make/extern-fn-with-packed-struct ... ignored, ignored when cross-compiling
[run-make] tests/run-make/extern-fn-with-union ... ignored, ignored when cross-compiling
[run-make] tests/run-make/extern-multiple-copies ... ignored, ignored when cross-compiling
[run-make] tests/run-make/extern-multiple-copies2 ... ignored, ignored when cross-compiling
[run-make] tests/run-make/extern-overrides-distribution ... ignored, ignored when cross-compiling
[run-make] tests/run-make/extra-filename-with-temp-outputs ... ignored, ignored when cross-compiling
[run-make] tests/run-make/extern-fn-explicit-align ... FAILED
alignment of `byval` on x86 in the process.
Commit 88e4d2c291 from five years ago removed
support for alignment on indirectly-passed arguments because of problems with
the `i686-pc-windows-msvc` target. Unfortunately, the `memcpy` optimizations I
recently added to LLVM 16 depend on this to forward `memcpy`s. This commit
attempts to fix the problems with `byval` parameters on that target and now
correctly adds the `align` attribute.
The problem is summarized in [this comment] by @eddyb. Briefly, 32-bit x86 has
special alignment rules for `byval` parameters: for the most part, their
alignment is forced to 4. This is not well-documented anywhere but in the Clang
source. I looked at the logic in Clang `TargetInfo.cpp` and tried to replicate
it here. The relevant methods in that file are
`X86_32ABIInfo::getIndirectResult()` and
`X86_32ABIInfo::getTypeStackAlignInBytes()`. The `align` parameter attribute
for `byval` parameters in LLVM must match the platform ABI, or miscompilations
will occur. Note that this doesn't use the approach suggested by eddyb, because
I felt it was overkill to store the alignment in `on_stack` when special
handling is really only needed for 32-bit x86.
As a side effect, this should fix#80127, because it will make the `align`
parameter attribute for `byval` parameters match the platform ABI on LLVM
x86-64.
[this comment]: https://github.com/rust-lang/rust/pull/80822#issuecomment-829985417
Add Tests for native wasm exceptions
### Motivation
In PR #111322, I added support for native WASM exceptions. I was asked by ``@davidtwco`` to add some tests for it in a follow up PR, which seems like a very good idea.
This PR adds three tests for this feature:
* codegen: ensure the correct LLVM instructions are used
* assembly: ensure the correct WASM instructions are used
* run-make: ensure the exception handling works; the WASM code is run using a small nodejs script which demonstrates the exception handling
### Complications
There are a few changes beside adding the tests, which were necessary
* Tests for the wasm32-unknown-unknown target are (as far as I know) only run on `test-various`. Its docker image uses nodejs-15, which is very old. Experimental support for wasm-exceptions was added in nodejs16. In nodejs 18.12 (LTS), they are stable.
- --> increase nodejs to 18.12 in `test-various`
* codegen/assembly tests are not performed for the wasm32-unknown-unknown target yet
- --> add those to `test-various` as well
Due to the last point, some tests are run which have not run before (assembly+codegen tests for wasm32-unknown-unknown). I added `// ignore wasm32-bare` for those which failed
### Local testing
I run all tests locally using both `test-various` and `wasm32`. As far as I know, none of the other systems run any test for wasm32 targets.
Add `-Zremark-dir` unstable flag to write LLVM optimization remarks to YAML
This PR adds an option for `rustc` to emit LLVM optimization remarks to a set of YAML files, which can then be digested by existing tools, like https://github.com/OfekShilon/optview2. When `-Cremark-dir` is passed, and remarks are enabled (`-Cremark=all`), the remarks will be now written to the specified directory, **instead** of being printed to standard error output. The files are named based on the CGU from which they are being generated.
Currently, the remarks are written using the LLVM streaming machinery, directly in the diagnostics handler. It seemed easier than going back to Rust and then form there back to C++ to use the streamer from the diagnostics handler. But there are many ways to implement this, of course, so I'm open to suggestions :)
I included some comments with questions into the code. Also, I'm not sure how to test this.
r? `@tmiasko`
Convert `run-make/coverage-reports` tests to use a custom compiletest mode
I was frustrated by the fact that most of the coverage tests are glued together with makefiles and shell scripts, so I tried my hand at converting most of them over to a newly-implemented `run-coverage` mode/suite in compiletest.
This ~~*mostly*~~ resolves#85009, ~~though I've left a small number of the existing tests as-is because they would require more work to fix/support~~.
---
I had time to go back and add support for the more troublesome tests that I had initially skipped over, so this PR now manages to completely get rid of `run-make/coverage-reports`.
---
The patches are arranged as follows:
- Declare the new mode/suite in bootstrap
- Small changes to compiletest that will be used by the new mode
- Implement the new mode in compiletest
- Migrate most of the tests over
- Add more code to bootstrap and compiletest to support the remaining tests
- Migrate the remaining tests (with some temporary hacks to avoid re-blessing them)
- Remove the temporary hacks and re-bless the migrated tests
- Remove the unused remnants of `run-make/coverage-reports`
To make it easier to verify that the output snapshots have been migrated
faithfully, this change adds some temporary helper code that lets us avoid
having to completely re-bless the existing snapshots.
A later change in this PR will then re-bless the tests and remove the temporary
helper code.
Make `UnwindAction::Continue` explicit in MIR dump
Makes it easier to spot unwinding related issues in MIR by making `UnwindAction::Continue` explicit, just like all other `UnwindAction`s.
Prevent `.eh_frame` from being emitted for `-C panic=abort`
Since `CheckAlignment` pass is after the `AbortUnwindingCalls` pass, the `UnwindAction::Terminate` inserted in it has no chance to be converted to `UnwindAction::Unreachable` anymore, causing us to emit landing pads that are not necessary. Although these landing pads can themselves be eliminated by LLVM, `.eh_frame` sections are still generated. This causes trouble for Rust-for-Linux project recently.
This PR changes it to generate `UnwindAction::Terminate` when we opt for `-Cpanic=unwind`, and `UnwindAction::Unreachable` for `-Cpanic=abort`.
`@ojeda`
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
- remove useless commands from test Makefile
- do not unnecessarily remove metadata temporary files because they'll be managed by MaybeTempDir
- remove unused FailedRemove error introduced by this PR
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
Support #[global_allocator] without the allocator shim
This makes it possible to use liballoc/libstd in combination with `--emit obj` if you use `#[global_allocator]`. This is what rust-for-linux uses right now and systemd may use in the future. Currently they have to depend on the exact implementation of the allocator shim to create one themself as `--emit obj` doesn't create an allocator shim.
Note that currently the allocator shim also defines the oom error handler, which is normally required too. Once `#![feature(default_alloc_error_handler)]` becomes the only option, this can be avoided. In addition when using only fallible allocator methods and either `--cfg no_global_oom_handling` for liballoc (like rust-for-linux) or `--gc-sections` no references to the oom error handler will exist.
To avoid this feature being insta-stable, you will have to define `__rust_no_alloc_shim_is_unstable` to avoid linker errors.
(Labeling this with both T-compiler and T-lang as it originally involved both an implementation detail and had an insta-stable user facing change. As noted above, the `__rust_no_alloc_shim_is_unstable` symbol requirement should prevent unintended dependence on this unstable feature.)
Fix local libs not included when printing native static libs
This PR fixes https://github.com/rust-lang/rust/issues/111643 by adding the local used libs to the printed `--print=native-static-libs` output.
It seems that `--print=native-static-libs` doesn't have any test, so I added one. It's very simple and doesn't even tries to compile the result to a binary as I don't know how to handle external library linking in CI. (Note that https://github.com/rust-lang/rust/blob/master/tests/run-make/staticlib-dylib-linkage/Makefile does compile to a binary)
r? `@bjorn3`
Fix dependency tracking for debugger visualizers
This PR fixes dependency tracking for debugger visualizer files by changing the `debugger_visualizers` query to an `eval_always` query that scans the AST while it is still available. This way the set of visualizer files is already available when dep-info is emitted. Since the query is turned into an `eval_always` query, dependency tracking will now reliably detect changes to the visualizer script files themselves.
TODO:
- [x] perf.rlo
- [x] Needs a bit more documentation in some places
- [x] Needs regression test for the incr. comp. case
Fixes https://github.com/rust-lang/rust/issues/111226
Fixes https://github.com/rust-lang/rust/issues/111227
Fixes https://github.com/rust-lang/rust/issues/111295
r? `@wesleywiser`
cc `@gibbyfree`
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
Fix data race in llvm source code coverage
Fixes#91092 .
Before this patch, increment of counters for code coverage looks like this:
```
movq .L__profc__RNvCsd6wgJFC5r19_3lib6bugaga+8(%rip), %rax
addq $1, %rax
movq %rax, .L__profc__RNvCsd6wgJFC5r19_3lib6bugaga+8(%rip)
```
after this patch:
```
lock incq .L__profc__RNvCs3JgIB2SjHh2_3lib6bugaga+8(%rip)
```
Fix instrument-coverage tests by using Python to sort instantiation groups
#110942 was intended to fix a set of `-Cinstrument-coverage` tests, but it ended up silently *breaking* those tests on Linux, for annoying reasons detailed at #111171.
Dealing with `diff --ignore-matching-lines` across multiple platforms has been such a hassle that I've instead written a simple Python script that can detect instantiation groups in the output of `llvm-cov show`, and sort them in a predictable order so that they can be used as snapshots for an ordinary invocation of `diff`.
This approach should be much less error-prone, because it can't accidentally ignore the wrong lines, and any unforeseen problems will tend to result in a Python exception or a failing diff.
Support linking to rust dylib with --crate-type staticlib
This allows for example dynamically linking libstd, while statically linking the user crate into an executable or C dynamic library. For this two unstable flags (`-Z staticlib-allow-rdylib-deps` and `-Z staticlib-prefer-dynamic`) are introduced. Without the former you get an error. The latter is the equivalent to `-C prefer-dynamic` for the staticlib crate type to indicate that dynamically linking is preferred when both options are available, like for libstd. Care must be taken to ensure that no crate ends up being merged into two distinct staticlibs that are linked together. Doing so will cause a linker error at best and undefined behavior at worst. In addition two distinct staticlibs compiled by different rustc may not be combined under any circumstances due to some rustc private symbols not being mangled.
To successfully link a staticlib, `--print native-static-libs` can be used while compiling to ask rustc for the linker flags necessary when linking the staticlib. This is an existing flag which previously only listed native libraries. It has been extended to list rust dylibs too. Trying to locate libstd yourself to link against it is not supported and may break if for example the libstd of multiple rustc versions are put in the same directory.
For an example on how to use this see the `src/test/run-make-fulldeps/staticlib-dylib-linkage/` test.
Add GNU Property Note
Fix#103001
Generates the missing property note:
```
Displaying notes found in: .note.gnu.property
Owner Data size Description
GNU 0x00000010 NT_GNU_PROPERTY_TYPE_0 Properties: x86 feature: IBT
```
debuginfo: split method declaration and definition
When we're adding a method to a type DIE, we only want a DW_AT_declaration
there, because LLVM LTO can't unify type definitions when a child DIE is a
full subprogram definition. Now the subprogram definition gets added at the
CU level with a specification link back to the abstract declaration.
Both GCC and Clang write debuginfo this way for C++ class methods.
Fixes#109730.
Fixes#109934.
Stabilize raw-dylib, link_ordinal, import_name_type and -Cdlltool
This stabilizes the `raw-dylib` feature (#58713) for all architectures (i.e., `x86` as it is already stable for all other architectures).
Changes:
* Permit the use of the `raw-dylib` link kind for x86, the `link_ordinal` attribute and the `import_name_type` key for the `link` attribute.
* Mark the `raw_dylib` feature as stable.
* Stabilized the `-Zdlltool` argument as `-Cdlltool`.
* Note the path to `dlltool` if invoking it failed (we don't need to do this if `dlltool` returns an error since it prints its path in the error message).
* Adds tests for `-Cdlltool`.
* Adds tests for being unable to find the dlltool executable, and dlltool failing.
* Fixes a bug where we were checking the exit code of dlltool to see if it failed, but dlltool always returns 0 (indicating success), so instead we need to check if anything was written to `stderr`.
NOTE: As previously noted (https://github.com/rust-lang/rust/pull/104218#issuecomment-1315895618) using dlltool within rustc is temporary, but this is not the first time that Rust has added a temporary tool use and argument: https://github.com/rust-lang/rust/pull/104218#issuecomment-1318720482
Big thanks to ``````@tbu-`````` for the first version of this PR (#104218)
When we're adding a method to a type DIE, we only want a DW_AT_declaration
there, because LLVM LTO can't unify type definitions when a child DIE is a
full subprogram definition. Now the subprogram definition gets added at the
CU level with a specification link back to the abstract declaration.
Don't accidentally ignore all output in `tests/run-make/coverage-reports` diffs
Because the literal pipe `|` character was not escaped, these regexes ended up accidentally ignoring every line in the coverage report output, so the tests would not fail even if the output was wrong.
Add test for warning-free builds of `core` under `no_global_oom_handling`
`tests/run-make/alloc-no-oom-handling` tests that `alloc` under `no_global_oom_handling` builds and is warning-free.
Do the same for `core` to prevent issues such as [1].
Link: https://github.com/rust-lang/rust/pull/110649 [1]
