This allows to directly map from a DefPathHash to the crate it
originates from, without constructing side tables to do that mapping.
It also allows to reliably and cheaply check for DefPathHash collisions.
Improve handling of spans around macro result parse errors
Fixes#81543
After we expand a macro, we try to parse the resulting tokens as a AST
node. This commit makes several improvements to how we handle spans when
an error occurs:
* Only ovewrite the original `Span` if it's a dummy span. This preserves
a more-specific span if one is available.
* Use `self.prev_token` instead of `self.token` when emitting an error
message after encountering EOF, since an EOF token always has a dummy
span
* Make `SourceMap::next_point` leave dummy spans unused. A dummy span
does not have a logical 'next point', since it's a zero-length span.
Re-using the span span preserves its 'dummy-ness' for other checks
Implement Rust 2021 panic
This implements the Rust 2021 versions of `panic!()`. See https://github.com/rust-lang/rust/issues/80162 and https://github.com/rust-lang/rfcs/pull/3007.
It does so by replacing `{std, core}::panic!()` by a bulitin macro that expands to either `$crate::panic::panic_2015!(..)` or `$crate::panic::panic_2021!(..)` depending on the edition of the caller.
This does not yet make std's panic an alias for core's panic on Rust 2021 as the RFC proposes. That will be a separate change: c5273bdfb2 That change is blocked on figuring out what to do with https://github.com/rust-lang/rust/issues/80846 first.
Fixes#81543
After we expand a macro, we try to parse the resulting tokens as a AST
node. This commit makes several improvements to how we handle spans when
an error occurs:
* Only ovewrite the original `Span` if it's a dummy span. This preserves
a more-specific span if one is available.
* Use `self.prev_token` instead of `self.token` when emitting an error
message after encountering EOF, since an EOF token always has a dummy
span
* Make `SourceMap::next_point` leave dummy spans unused. A dummy span
does not have a logical 'next point', since it's a zero-length span.
Re-using the span span preserves its 'dummy-ness' for other checks
Make more traits of the From/Into family diagnostic items
Following traits are now diagnostic items:
- `From` (unchanged)
- `Into`
- `TryFrom`
- `TryInto`
This also adds symbols for those items:
- `into_trait`
- `try_from_trait`
- `try_into_trait`
Related: https://github.com/rust-lang/rust-clippy/pull/6620#discussion_r562482587
Due to macro expansion, its possible to end up with two distinct
`ExpnId`s that have the same `ExpnData` contents. This violates the
contract of `HashStable`, since two unequal `ExpnId`s will end up with
equal `Fingerprint`s.
This commit adds a `disambiguator` field to `ExpnData`, which is used to
force two otherwise-equivalent `ExpnData`s to be distinct.
Following traits are now diagnostic items:
- `From` (unchanged)
- `Into`
- `TryFrom`
- `TryInto`
This also adds symbols for those items:
- `into_trait`
- `try_from_trait`
- `try_into_trait`
implement ptr::write without dedicated intrinsic
This makes `ptr::write` more consistent with `ptr::write_unaligned`, `ptr::read`, `ptr::read_unaligned`, all of which are implemented in terms of `copy_nonoverlapping`.
This means we can also remove `move_val_init` implementations in codegen and Miri, and its special handling in the borrow checker.
Also see [this Zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/ptr.3A.3Aread.20vs.20ptr.3A.3Awrite).
Properly handle `SyntaxContext` of dummy spans in incr comp
Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Rework diagnostics for wrong number of generic args (fixes#66228 and #71924)
This PR reworks the `wrong number of {} arguments` message, so that it provides more details and contextual hints.
Fixes#80336
Due to macro expansion, we may end up with spans with an invalid
location and non-root `SyntaxContext`. This commits preserves the
`SyntaxContext` of such spans in the incremental cache, and ensures
that we always hash the `SyntaxContext` when computing the `Fingerprint`
of a `Span`
Previously, we would discard the `SyntaxContext` during serialization to
the incremental cache, causing the span's `Fingerprint` to change across
compilation sessions.
Fix --pretty=expanded with --remap-path-prefix
Per https://github.com/rust-lang/rust/issues/80832, using
--pretty=expanded and --remap-path-prefix results in an ICE.
This is becasue the session source files table is stored in remapped
form, whereas --pretty-expanded looks up unremapped files. This remaps
the path prefixes before lookup.
~~There don't appear to be any existing tests for --pretty=expanded; I'll look into
adding some.~~ Never mind, found the pretty tests.
Fixes#80832
resolve: Scope visiting doesn't need an `Ident`
Resolution scope visitor (`fn visit_scopes`) currently takes an `Ident` parameter, but it doesn't need a full identifier, or even its span, it only needs the `SyntaxContext` part.
The `SyntaxContext` part is necessary because scope visitor has to jump to macro definition sites, so it has to be directed by macro expansion information somehow.
I think it's clearer to pass only the necessary part.
Yes, usually visiting happens as a part of an identifier resolution, but in cases like collecting traits in scope (#80765) or collecting typo suggestions that's not the case.
r? `@matthewjasper`
Per https://github.com/rust-lang/rust/issues/80832, using
--pretty=expanded and --remap-path-prefix results in an ICE.
This is becasue the session source files table is stored in remapped
form, whereas --pretty-expanded looks up unremapped files. This remaps
the path prefixes before lookup.
On structured suggestion for `let` -> `const` and `const` -> `let`, use
a proper `Span` and update tests to check the correct application.
Follow up to #80012.
Make `ExpnData` fields `krate` and `orig_id` private
These fields are only used by hygiene serialized, and should not be
accessed by anything outside of `rustc_span`.
- Adds optional default values to const generic parameters in the AST
and HIR
- Parses these optional default values
- Adds a `const_generics_defaults` feature gate
Edit rustc_span documentation
Various changes to the `rustc_span` docs, including the following:
- Additions to top-level docs
- Edits to the source_map module docs
- Edits to documentation for `Span` and `SpanData`
- Added intra-docs links
- Documentation for Levenshtein distances
- Fixed missing punctuation
Various changes to the `rustc_span` docs, including the following:
- Additions to top-level docs
- Edits to the source_map module docs
- Edits to documentation for `Span` and `SpanData`
- Added intra-docs links
- Documentation for Levenshtein distances
- Fixed missing punctuation
Remap instrument-coverage line numbers in doctests
This uses the `SourceMap::doctest_offset_line` method to re-map line
numbers from doctests. Remapping columns is not yet done, and rustdoc
still does not output the correct filename when running doctests in a
workspace.
Part of #79417 although I dont consider that fixed until both filenames
and columns are mapped correctly.
r? `@richkadel`
I might jump on zulip the comming days. Still need to figure out how to properly write tests for this, and deal with other doctest issues in the meantime.
Currently, the rustc_macros::symbols macro generates two
`macro_rules!` macros as its output. These two macros are
used in rustc_span/src/symbol.rs.
This means that each Symbol that we define is represented
in the AST of rustc_symbols twice: once in the definition
of the `define_symbols!` macro (similarly for the
`keywords! macro), and once in the rustc_span::symbols
definition.
That would be OK if there were only a handful of symbols,
but currently we define over 1100 symbols. The definition
of the `define_symbols!` macro contains the expanded definition
of each symbol, so that's a lot of AST storage wasted on a
macro that is used exactly once.
This commit removes the `define_symbols` macro, and simply
allows the proc macro to directly generate the
`rustc_symbols::symbol::sym` module.
The benefit is mainly in reducing memory wasted during
compilation of rustc itself. It should also reduce memory used
by Rust Analyzer.
This commit also reduces the size of the AST for symbol
definitions, by moving two `#[allow(...)]` attributes from
the symbol constants to the `sym` module. This eliminates 2200+
attribute nodes.
This commit also eliminates the need for the `digits_array`
constant. There's no need to store an array of Symbol values
for digits. We can simply define a constant of the base value,
and add to that base value.
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
Gives a performance increase over calling byte_pos_to_line_and_col
twice, partially because it decreases the function calling overhead,
potentially because it doesn't populate the line cache with lines that
turn out to belong to invalid spans, and likely because of some other
incidental improvements made possible by having more context available.
