`#[deny(unsafe_op_in_unsafe_fn)]` in liballoc
This PR proposes to make use of the new `unsafe_op_in_unsafe_fn` lint, i.e. no longer consider the body of an unsafe function as an unsafe block and require explicit unsafe block to perform unsafe operations.
This has been first (partly) suggested by @Mark-Simulacrum in https://github.com/rust-lang/rust/pull/69245#issuecomment-587817065
Tracking issue for the feature: #71668.
~~Blocked on #71862.~~
r? @Mark-Simulacrum cc @nikomatsakis can you confirm that those changes are desirable? Should I restrict it to only BTree for the moment?
Document unsafety in slice/sort.rs
Let me know if these documentations are accurate c:
I don't think I am capable enough to document the safety of `partition_blocks`, however.
Related issue #66219
This commit modifies the pretty printer and const eval in the MIR so
that `destructure_const` (used in `pretty_print_const_value`) can handle
enums with no variants (or types containing enums with no variants).
Signed-off-by: David Wood <david@davidtw.co>
Speed up bootstrap a little.
The bootstrap script was calling `cargo metadata` 3 times (or 6 with `-v`). This is a very expensive operation, and this attempts to avoid the extra calls. On my system, a simple command like `./x.py test -h -v` goes from about 3 seconds to 0.4.
An overview of the changes:
- Call `cargo metadata` only once with `--no-deps`. Optional dependencies are filtered in `in_tree_crates` (handling `profiler_builtins` and `rustc_codegen_llvm` which are driven by the config).
- Remove a duplicate call to `metadata::build` when using `-v`. I'm not sure why it was there, it looks like a mistake or vestigial from previous behavior.
- Remove check for `_shim`, I believe all the `_shim` crates are now gone.
- Remove check for `rustc_` and `*san` for `test::Crate::should_run`, these are no longer dependencies in the `test` tree.
- Use relative paths in `./x.py test -h -v` output.
- Some code cleanup (remove unnecessary `find_compiler_crates`, etc.).
- Show suite paths (`src/test/ui/...`) in `./x.py test -h -v` output.
- Some doc comments.
bootstrap/install.rs: support a nonexistent `prefix` in `x.py install`
PR #49778 introduced fs::canonicalize() which fails for a nonexistent path.
This is a surprise for someone used to GNU Autotools' configure which can create any necessary intermediate directories in prefix.
This change makes it run fs::create_dir_all() before canonicalize().
bootstrap: read config from $RUST_BOOTSTRAP_CONFIG
This PR modifies bootstrap so that `config.toml` is read first from `RUST_BOOTSTRAP_CONFIG`, then `--config` and finally `config.toml` in the current directory.
This is a subjective change, intended to improve the ergnomics when using "development shells" for rustc development (for example, using tools such as Nix) which set environment variables to ensure a reproducible environment (these development shells can then be version controlled, e.g. [my rustc shell](6b74a5c170/nix/shells/rustc.nix)). By optionally reading `config.toml` from an environment variable, a `config.toml` can be defined in the development shell and a path to it exposed in the `RUST_BOOTSTRAP_CONFIG` environment variable - avoiding the need to manually symlink the contents of this file to `config.toml` in the working directory.
Change how compiler-builtins gets many CGUs
This commit intends to fix an accidental regression from #70846. The
goal of #70846 was to build compiler-builtins with a maximal number of
CGUs to ensure that each module in the source corresponds to an object
file. This high degree of control for compiler-builtins is desirable to
ensure that there's at most one exported symbol per CGU, ideally
enabling compiler-builtins to not conflict with the system libgcc as
often.
In #70846, however, only part of the compiler understands that
compiler-builtins is built with many CGUs. The rest of the compiler
thinks it's building with `sess.codegen_units()`. Notably the
calculation of `sess.lto()` consults `sess.codegen_units()`, which when
there's only one CGU it disables ThinLTO. This means that
compiler-builtins is built without ThinLTO, which is quite harmful to
performance! This is the root of the cause from #73135 where intrinsics
were found to not be inlining trivial functions.
The fix applied in this commit is to remove the special-casing of
compiler-builtins in the compiler. Instead the build system is now
responsible for special-casing compiler-builtins. It doesn't know
exactly how many CGUs will be needed but it passes a large number that
is assumed to be much greater than the number of source-level modules
needed. After reading the various locations in the compiler source, this
seemed like the best solution rather than adding more and more special
casing in the compiler for compiler-builtins.
Closes#73135
compiletest: Add directives to detect sanitizer support
Add needs-sanitizer-{address,leak,memory,thread} directive indicating
that test requires target with support for specific sanitizer.
This is an addition to the existing needs-sanitizer-support directive
indicating that test requires a sanitizer runtime library.
The existing needs-sanitizer-support directive could be incorporated into the
new ones, but I decided to retain it, since it enables running sanitizer
codegen tests even when building of sanitizer runtime libraries is disabled.
first stage of implementing LLVM code coverage
This PR replaces #70680 (WIP toward LLVM Code Coverage for Rust) since I am re-implementing the Rust LLVM code coverage feature in a different part of the compiler (in MIR pass(es) vs AST).
This PR updates rustc with `-Zinstrument-coverage` option that injects the llvm intrinsic `instrprof.increment()` for code generation.
This initial version only injects counters at the top of each function, and does not yet implement the required coverage map.
Upcoming PRs will add the coverage map, and add more counters and/or counter expressions for each conditional code branch.
Rust compiler MCP https://github.com/rust-lang/compiler-team/issues/278
Relevant issue: #34701 - Implement support for LLVMs code coverage instrumentation
***[I put together some development notes here, under a separate branch.](cfa0b21d34/src/test/codegen/coverage-experiments/README-THIS-IS-TEMPORARY.md)***
Fix up autoderef when reborrowing
Currently `(f)()` and `f.call_mut()` behaves differently if expression `f` contains autoderef in it. This causes a weird error in #72225.
When `f` is type checked, `Deref` is used (this is expected as we can't yet determine if we should use `Fn` or `FnMut`). When subsequently we determine the actual trait to be used, when using the `f.call_mut()` syntax the `Deref` is patched to `DerefMut`, while for the `(f)()` syntax case it is not.
This PR replicates the fixup for the first case.
Fixes#72225Fixes#68590
This commit removes the normalization from `transparent_newtype_field` -
turns out it wasn't necessary and that makes it a bunch simpler -
particularly when handling projections.
Signed-off-by: David Wood <david@davidtw.co>
This commit applies the changes introduced in #72890 to both enum
variants and unions - where the logic prior to #72890 was duplicated.
Signed-off-by: David Wood <david@davidtw.co>
Opaque types cannot be used in extern declarations, and normally cannot
exist in fields - except with type aliases to `impl Trait` and
projections which normalize to them.
Signed-off-by: David Wood <david@davidtw.co>
This commit modifies `transparent_newtype_field` so that it handles
projections with generic parameters, where `normalize_erasing_regions`
would ICE.
Signed-off-by: David Wood <david@davidtw.co>
Reduce pointer casts in Box::into_boxed_slice
We only need to cast the pointer once to change `Box<T>` to an array
`Box<[T; 1]>`, then we can let unsized coercion return `Box<[T]>`.
Add rust specific features to print target features
Fixes#71583
`crt-static` is a rust specific target feature that's absent from llvm feature table, adding it there so that it shows under `rustc --print target-features`.
Probably the most native implementation I could think of, would love to get feedback.
Ensure std benchmarks get tested.
This ensures that the std benchmarks don't break in the future. Currently they aren't compiled or tested on CI, so they can easily bitrot. Testing a benchmark runs it with one iteration. Adding these should only add a few seconds to CI.
Closes#54176Closes#61913
Remove const prop for indirects
This was only used by one mir-opt test and since it causes buggy behavior under `-Zmir-opt-level=2`, it seems like we should remove it.
This was split out from #71946.
Closes#72679Closes#72372Closes#72285
Create self-contained directory and move there some of external binaries/libs
One of the steps to reach design described in https://github.com/rust-lang/rust/issues/68887#issuecomment-633048380
This PR moves things around and allows link code to handle the new directory structure.
tag/niche terminology cleanup
The term "discriminant" was used in two ways throughout the compiler:
* every enum variant has a corresponding discriminant, that can be given explicitly with `Variant = N`.
* that discriminant is then encoded in memory to store which variant is active -- but this encoded form of the discriminant was also often called "discriminant", even though it is conceptually quite different (e.g., it can be smaller in size, or even use niche-filling).
After discussion with @eddyb, this renames the second term to "tag". The way the tag is encoded can be either `TagEncoding::Direct` (formerly `DiscriminantKind::Tag`) or `TagEncoding::Niche` (formerly `DiscrimianntKind::Niche`).
This finally resolves some long-standing confusion I had about the handling of variant indices and discriminants, which surfaced in https://github.com/rust-lang/rust/pull/72419.
(There is also a `DiscriminantKind` type in libcore, it remains unaffected. I think this corresponds to the discriminant, not the tag, so that seems all right.)
r? @eddyb
For the following code
```rust
let c = || bar(foo.x, foo.x)
```
We generate two different `hir::Place`s for both `foo.x`.
Handling this adds overhead for analysis we need to do for RFC 2229.
We also want to store type information at each Projection to support
analysis as part of the RFC. This resembles what we have for
`mir::Place`
This commit modifies the Place as follows:
- Rename to `PlaceWithHirId`, where there `hir_id` is that of the
expressioin.
- Move any other information that describes the access out to another
struct now called `Place`.
- Removed `Span`, it can be accessed using the [hir
API](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/hir/map/struct.Map.html#method.span)
- Modify `Projection` to be a strucutre of its own, that currently only
contains the `ProjectionKind`.
Adding type information to projections wil be completed as part of https://github.com/rust-lang/project-rfc-2229/issues/5
Closes https://github.com/rust-lang/project-rfc-2229/issues/3
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Roxane Fruytier <roxane.fruytier@hotmail.com>
Added tooltip for should_panic code examples
This change adds a tooltip to the documentation for `should_panic` examples. It currently displays identically to `compile_fail` examples, save for the changed text. It may be helpful to change the color that this displays in to make it visually more clear what is going on, but I'm unsure if additional colors wouldn't just be distracting.
I brought this [up on internals](https://internals.rust-lang.org/t/indicating-that-an-example-is-should-panic-in-docs/12544) a few days ago, and there seemed to be a mild positive response to it.
Mention functions pointers in the documentation
Fixes#51615.
This mentions function pointers in the documentation for `core::mem::zeroed`, adding them to the list of types that are **always** wrong when zeroed, with `&T` and `&mut T`.
@rustbot modify labels: T-doc, C-enhancement, T-libs
Tweak "non-primitive cast" error
- Suggest borrowing expression if it would allow cast to work.
- Suggest using `<Type>::from(<expr>)` when appropriate.
- Minor tweak to `;` typo suggestion.
Partily address #47136.
Make new type param suggestion more targetted
Do not suggest new type param when encountering a missing type in an ADT
field with generic parameters.
Fix#72640.