This commit merges the `rustrt` crate into `std`, undoing part of the
facade. This merger continues the paring down of the runtime system.
Code relying on the public API of `rustrt` will break; some of this API
is now available through `std::rt`, but is likely to change and/or be
removed very soon.
[breaking-change]
followed by a semicolon.
This allows code like `vec![1i, 2, 3].len();` to work.
This breaks code that uses macros as statements without putting
semicolons after them, such as:
fn main() {
...
assert!(a == b)
assert!(c == d)
println(...);
}
It also breaks code that uses macros as items without semicolons:
local_data_key!(foo)
fn main() {
println("hello world")
}
Add semicolons to fix this code. Those two examples can be fixed as
follows:
fn main() {
...
assert!(a == b);
assert!(c == d);
println(...);
}
local_data_key!(foo);
fn main() {
println("hello world")
}
RFC #378.
Closes#18635.
[breaking-change]
In US english, "that" is used in restrictive clauses in place of
"which", and often affects the meaning of sentences.
In UK english and many dialects, no distinction is
made.
While Rust devs want to avoid unproductive pedanticism, it is worth at
least being uniform in documentation such as:
http://doc.rust-lang.org/std/iter/index.html
and also in cases where correct usage of US english clarifies the
sentence.
This test would read with a timeout and then send a UDP message, expecting the
message to be received. The receiving port, however, was bound in the child
thread so it could be the case that the timeout and send happens before the
child thread runs. To remedy this we just bind the port before the child thread
runs, moving it into the child later on.
cc #19120
per rfc 459
cc https://github.com/rust-lang/rust/issues/19390
One question is: should we start by warning, and only switch to hard error later? I think we discussed something like this in the meeting.
r? @alexcrichton
This commit performs a second pass stabilization of the `std::default` module.
The module was already marked `#[stable]`, and the inheritance of `#[stable]`
was removed since this attribute was applied. This commit adds the `#[stable]`
attribute to the trait definition and one method name, along with all
implementations found in the standard distribution.
This commit collapses the various prelude traits for slices into just one trait:
* SlicePrelude/SliceAllocPrelude => SliceExt
* CloneSlicePrelude/CloneSliceAllocPrelude => CloneSliceExt
* OrdSlicePrelude/OrdSliceAllocPrelude => OrdSliceExt
* PartialEqSlicePrelude => PartialEqSliceExt
In US english, "that" is used in restrictive clauses in place of
"which", and often affects the meaning of sentences.
In UK english and many dialects, no distinction is
made.
While Rust devs want to avoid unproductive pedanticism, it is worth at
least being uniform in documentation such as:
http://doc.rust-lang.org/std/iter/index.html
and also in cases where correct usage of US english clarifies the
sentence.
This commit collapses the various prelude traits for slices into just one trait:
* SlicePrelude/SliceAllocPrelude => SliceExt
* CloneSlicePrelude/CloneSliceAllocPrelude => CloneSliceExt
* OrdSlicePrelude/OrdSliceAllocPrelude => OrdSliceExt
* PartialEqSlicePrelude => PartialEqSliceExt
This test would read with a timeout and then send a UDP message, expecting the
message to be received. The receiving port, however, was bound in the child
thread so it could be the case that the timeout and send happens before the
child thread runs. To remedy this we just bind the port before the child thread
runs, moving it into the child later on.
cc #19120
This change makes the compiler no longer infer whether types (structures
and enumerations) implement the `Copy` trait (and thus are implicitly
copyable). Rather, you must implement `Copy` yourself via `impl Copy for
MyType {}`.
A new warning has been added, `missing_copy_implementations`, to warn
you if a non-generic public type has been added that could have
implemented `Copy` but didn't.
For convenience, you may *temporarily* opt out of this behavior by using
`#![feature(opt_out_copy)]`. Note though that this feature gate will never be
accepted and will be removed by the time that 1.0 is released, so you should
transition your code away from using it.
This breaks code like:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
Change this code to:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
impl Copy for Point2D {}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
This is the backwards-incompatible part of #13231.
Part of RFC #3.
[breaking-change]
Now that we have an overloaded comparison (`==`) operator, and that `Vec`/`String` deref to `[T]`/`str` on method calls, many `as_slice()`/`as_mut_slice()`/`to_string()` calls have become redundant. This patch removes them. These were the most common patterns:
- `assert_eq(test_output.as_slice(), "ground truth")` -> `assert_eq(test_output, "ground truth")`
- `assert_eq(test_output, "ground truth".to_string())` -> `assert_eq(test_output, "ground truth")`
- `vec.as_mut_slice().sort()` -> `vec.sort()`
- `vec.as_slice().slice(from, to)` -> `vec.slice(from_to)`
---
Note that e.g. `a_string.push_str(b_string.as_slice())` has been left untouched in this PR, since we first need to settle down whether we want to favor the `&*b_string` or the `b_string[]` notation.
This is rebased on top of #19167
cc @alexcrichton @aturon
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::\*, Result::\*, and Ordering::\*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
Previously, `BufWriter::write` would just return an `std::io::OtherIoError` if someone attempted to write past the end of the wrapped buffer. This pull request changes the error to support partial writes and return a `std::io::ShortWrite`, or an `io::io::EndOfFile` if it's been fully exhausted.
I've also optimized away a bounds check inside `BufWriter::write`, which should help shave off some nanoseconds in an inner loops.
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::* and Result::*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
io::stdin returns a new `BufferedReader` each time it's called, which
results in some very confusing behavior with disappearing output. It now
returns a `StdinReader`, which wraps a global singleton
`Arc<Mutex<BufferedReader<StdReader>>`. `Reader` is implemented directly
on `StdinReader`. However, `Buffer` is not, as the `fill_buf` method is
fundamentaly un-thread safe. A `lock` method is defined on `StdinReader`
which returns a smart pointer wrapping the underlying `BufferedReader`
while guaranteeing mutual exclusion.
Code that treats the return value of io::stdin as implementing `Buffer`
will break. Add a call to `lock`:
```rust
io::stdin().read_line();
// =>
io::stdin().lock().read_line();
```
Closes#14434
[breaking-change]
On *BSD systems, we can `open(2)` a directory and directly `read(2)` from it due to an old tradition. We should avoid doing so by explicitly calling `fstat(2)` to check the type of the opened file.
Opening a directory as a module file can't always be avoided. Even when there's no "path" attribute trick involved, there can always be a *directory* named `my_module.rs`.
Incidentally, remove unnecessary mutability of `&self` from `io::fs::File::stat()`.
This continues the work @thestinger started in #18885 (which hasn't landed yet, so wait for that to land before landing this one). Instead of adding more methods to `BufReader`, this just allows a `&[u8]` to be used directly as a `Reader`. It also adds an impl of `Writer` for `&mut [u8]`.
io::stdin returns a new `BufferedReader` each time it's called, which
results in some very confusing behavior with disappearing output. It now
returns a `StdinReader`, which wraps a global singleton
`Arc<Mutex<BufferedReader<StdReader>>`. `Reader` is implemented directly
on `StdinReader`. However, `Buffer` is not, as the `fill_buf` method is
fundamentaly un-thread safe. A `lock` method is defined on `StdinReader`
which returns a smart pointer wrapping the underlying `BufferedReader`
while guaranteeing mutual exclusion.
Code that treats the return value of io::stdin as implementing `Buffer`
will break. Add a call to `lock`:
```rust
io::stdin().lines()
// =>
io::stdin().lock().lines()
```
Closes#14434
[breaking-change]
On *BSD systems, we can open(2) a directory and directly read(2) from
it due to an old tradition. We should avoid doing so by explicitly
calling fstat(2) to check the type of the opened file.
Opening a directory as a module file can't always be avoided.
Even when there's no "path" attribute trick involved, there can always
be a *directory* named "my_module.rs".
Fix#12460
Signed-off-by: NODA, Kai <nodakai@gmail.com>
Implements RFC 438.
Fixes#19092.
This is a [breaking-change]: change types like `&Foo+Send` or `&'a mut Foo+'a` to `&(Foo+Send)` and `&'a mut (Foo+'a)`, respectively.
r? @brson
All of the enum components had a redundant 'Type' specifier: TypeSymlink, TypeDirectory, TypeFile. This change removes them, replacing them with a namespace: FileType::Symlink, FileType::Directory, and FileType::RegularFile.
RegularFile is used instead of just File, as File by itself could be mistakenly thought of as referring to the struct.
Part of #19253.
This is an initial pass at stabilizing the `iter` module. The module is
fairly large, but is also pretty polished, so most of the stabilization
leaves things as they are.
Some changes:
* Due to the new object safety rules, various traits needs to be split
into object-safe traits and extension traits. This includes `Iterator`
itself. While splitting up the traits adds some complexity, it will
also increase flexbility: once we have automatic impls of `Trait` for
trait objects over `Trait`, then things like the iterator adapters
will all work with trait objects.
* Iterator adapters that use up the entire iterator now take it by
value, which makes the semantics more clear and helps catch bugs. Due
to the splitting of Iterator, this does not affect trait objects. If
the underlying iterator is still desired for some reason, `by_ref` can
be used. (Note: this change had no fallout in the Rust distro except
for the useless mut lint.)
* In general, extension traits new and old are following an [in-progress
convention](rust-lang/rfcs#445). As such, they
are marked `unstable`.
* As usual, anything involving closures is `unstable` pending unboxed
closures.
* A few of the more esoteric/underdeveloped iterator forms (like
`RandomAccessIterator` and `MutableDoubleEndedIterator`, along with
various unfolds) are left experimental for now.
* The `order` submodule is left `experimental` because it will hopefully
be replaced by generalized comparison traits.
* "Leaf" iterators (like `Repeat` and `Counter`) are uniformly
constructed by free fns at the module level. That's because the types
are not otherwise of any significance (if we had `impl Trait`, you
wouldn't want to define a type at all).
Closes#17701
Due to renamings and splitting of traits, this is a:
[breaking-change]
