Ideally, we would want to handle a broader set of cases to fully fix the
underlying bug here. That is currently relatively expensive at compile and
runtime, so we don't do that for now.
The wrapper type led to tons of target.target
across the compiler. Its ptr_width field isn't
required any more, as target_pointer_width
is already present in parsed form.
Preparation for a subsequent change that replaces
rustc_target::config::Config with its wrapped Target.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/ -type f -exec sed -i -e 's/target\.target\([)\.,; ]\)/target\1/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target\.target$/target/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target.ptr_width/target.pointer_width/g' {} \;
./x.py fmt
Rename target_pointer_width to pointer_width because it is already
member of the Target struct.
The compiler supports only three valid values for target_pointer_width:
16, 32, 64. Thus it can safely be turned into an int.
This means less allocations and clones as well as easier handling of the type.
Remove unused code
Rustc has a builtin lint for detecting unused code inside a crate, but when an item is marked `pub`, the code, even if unused inside the entire workspace, is never marked as such. Therefore, I've built [warnalyzer](https://github.com/est31/warnalyzer) to detect unused items in a cross-crate setting.
Closes https://github.com/est31/warnalyzer/issues/2
Codegen backend interface refactor
This moves several things away from the codegen backend to rustc_interface. There are a few behavioral changes where previously the incremental cache (incorrectly) wouldn't get finalized, but now it does. See the individual commit messages.
Add LLVM flags to limit DWARF version to 2 on BSD
This has been a thorn in my side for a while, I can finally generate flamegraphs of rust programs on bsd again. This fixes dtrace profiling on freebsd, I think it might help with lldb as well but I can't test that because my current rust-lldb setup is messed up.
I'm limiting the dwarf version to 2 on all bsd's (netbsd/openbsd/freebsd) since it looks like this applies to all of them, but I have only tested on freebsd.
Let me know if there's anything I can improve!
---
Currently on FreeBSD dtrace profiling does not work and shows jumbled/incorrect
symbols in the backtraces. FreeBSD does not support the latest versions of DWARF
in dtrace (and lldb?) yet, and needs to be limited to DWARF2 in the same way as macos.
This adds an is_like_bsd flag since it was missing. NetBSD/OpenBSD/FreeBSD all
match this.
This effectively copies #11864 but targets FreeBSD instead of macos.
Certain platforms need to limit the DWARF version emitted (oxs, *bsd). This
change adds a dwarf_version entry to the options that allows a platform to
specify the dwarf version to use. By default this option is none and the default
DWARF version is selected.
Also adds an option for printing Option<u32> json keys
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
Add asm! support for mips64
- [x] Updated `src/doc/unstable-book/src/library-features/asm.md`.
- [ ] No vector type support. I don't know much about those types.
cc #76839
Sometimes, a backend may need to emit warnings, errors, or otherwise
need to know the span of the current item in a basic block. So, add a
set_span method to give the backend that information.
This is a combination of 18 commits.
Commit #2:
Additional examples and some small improvements.
Commit #3:
fixed mir-opt non-mir extensions and spanview title elements
Corrected a fairly recent assumption in runtest.rs that all MIR dump
files end in .mir. (It was appending .mir to the graphviz .dot and
spanview .html file names when generating blessed output files. That
also left outdated files in the baseline alongside the files with the
incorrect names, which I've now removed.)
Updated spanview HTML title elements to match their content, replacing a
hardcoded and incorrect name that was left in accidentally when
originally submitted.
Commit #4:
added more test examples
also improved Makefiles with support for non-zero exit status and to
force validation of tests unless a specific test overrides it with a
specific comment.
Commit #5:
Fixed rare issues after testing on real-world crate
Commit #6:
Addressed PR feedback, and removed temporary -Zexperimental-coverage
-Zinstrument-coverage once again supports the latest capabilities of
LLVM instrprof coverage instrumentation.
Also fixed a bug in spanview.
Commit #7:
Fix closure handling, add tests for closures and inner items
And cleaned up other tests for consistency, and to make it more clear
where spans start/end by breaking up lines.
Commit #8:
renamed "typical" test results "expected"
Now that the `llvm-cov show` tests are improved to normally expect
matching actuals, and to allow individual tests to override that
expectation.
Commit #9:
test coverage of inline generic struct function
Commit #10:
Addressed review feedback
* Removed unnecessary Unreachable filter.
* Replaced a match wildcard with remining variants.
* Added more comments to help clarify the role of successors() in the
CFG traversal
Commit #11:
refactoring based on feedback
* refactored `fn coverage_spans()`.
* changed the way I expand an empty coverage span to improve performance
* fixed a typo that I had accidently left in, in visit.rs
Commit #12:
Optimized use of SourceMap and SourceFile
Commit #13:
Fixed a regression, and synched with upstream
Some generated test file names changed due to some new change upstream.
Commit #14:
Stripping out crate disambiguators from demangled names
These can vary depending on the test platform.
Commit #15:
Ignore llvm-cov show diff on test with generics, expand IO error message
Tests with generics produce llvm-cov show results with demangled names
that can include an unstable "crate disambiguator" (hex value). The
value changes when run in the Rust CI Windows environment. I added a sed
filter to strip them out (in a prior commit), but sed also appears to
fail in the same environment. Until I can figure out a workaround, I'm
just going to ignore this specific test result. I added a FIXME to
follow up later, but it's not that critical.
I also saw an error with Windows GNU, but the IO error did not
specify a path for the directory or file that triggered the error. I
updated the error messages to provide more info for next, time but also
noticed some other tests with similar steps did not fail. Looks
spurious.
Commit #16:
Modify rust-demangler to strip disambiguators by default
Commit #17:
Remove std::process::exit from coverage tests
Due to Issue #77553, programs that call std::process::exit() do not
generate coverage results on Windows MSVC.
Commit #18:
fix: test file paths exceeding Windows max path len
Move target feature whitelist from cg_llvm to cg_ssa
These target features have to be supported or at least emulated by alternative codegen backends anyway as they are used by common crates. By moving this list to cg_ssa, other codegen backends don't have to copy
this code.
These target features have to be supported or at least emulated by
alternative codegen backends anyway as they are used by common crates.
By moving this list to cg_ssa, other codegen backends don't have to copy
this code.
Related: https://github.com/rust-lang/rust/issues/66741
Guarded with `#![feature(default_alloc_error_handler)]` a default
`alloc_error_handler` is called, if a custom allocator is used and no
other custom `#[alloc_error_handler]` is defined.
The panic message does not contain the size anymore, because it would
pull in the fmt machinery, which would blow up the code size
significantly.
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Secure entry functions do not support if arguments are passed on the
stack. An "unsupported" diagnostic will be emitted by LLVM if that is
the case.
This commits adds support in Rust for that diagnostic so that an error
will be output if that is the case!
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
This patch also:
* Add soft-float supports: only f32
* zero-extend i8/i16 to i32 because MIPS only supports register-length
arithmetic.
* Update table in asm! chapter in unstable book.
Remove TrustedLen requirement from BuilderMethods::switch
The main use case of TrustedLen is allowing APIs to specialize on it,
but no use of it uses that specialization. Instead, only the .len()
function provided by ExactSizeIterator is used, which is already
required to be accurate.
Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
The main use case of TrustedLen is allowing APIs to specialize on it,
but no use of it uses that specialization. Instead, only the .len()
function provided by ExactSizeIterator is used, which is already
required to be accurate.
Thus, the TrustedLen requirement on BuilderMethods::switch is redundant.
Remove DeclareMethods
Most of the `DeclareMethods` API was only used internally by rustc_codegen_llvm. As such, it makes no sense to require other backends to implement them.
(`get_declared_value` and `declare_cfn` were used, in one place, specific to the `main` symbol, which I've replaced with a more specialized function to allow more flexibility in implementation - the intent is that `declare_c_main` can go away once we do something more clever, e.g. @eddyb has ideas around having a MIR shim or somesuch we can explore in a follow-up PR)
Remove MMX from Rust
Follow-up to https://github.com/rust-lang/stdarch/pull/890
This removes most of MMX from Rust (tests pass with small changes), keeping stable `is_x86_feature_detected!("mmx")` working.
Rollup of 15 pull requests
Successful merges:
- #76722 (Test and fix Send and Sync traits of BTreeMap artefacts)
- #76766 (Extract some intrinsics out of rustc_codegen_llvm)
- #76800 (Don't generate bootstrap usage unless it's needed)
- #76809 (simplfy condition in ItemLowerer::with_trait_impl_ref())
- #76815 (Fix wording in mir doc)
- #76818 (Don't compile regex at every function call.)
- #76821 (Remove redundant nightly features)
- #76823 (black_box: silence unused_mut warning when building with cfg(miri))
- #76825 (use `array_windows` instead of `windows` in the compiler)
- #76827 (fix array_windows docs)
- #76828 (use strip_prefix over starts_with and manual slicing based on pattern length (clippy::manual_strip))
- #76840 (Move to intra doc links in core/src/future)
- #76845 (Use intra docs links in core::{ascii, option, str, pattern, hash::map})
- #76853 (Use intra-doc links in library/core/src/task/wake.rs)
- #76871 (support panic=abort in Miri)
Failed merges:
r? `@ghost`
As a side effect, we now represent most promoteds as `ConstValue::Scalar` again. This is useful because all implict promoteds are just references anyway and most explicit promoteds are numeric arguments to `asm!` or SIMD instructions.
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
A significant amount of intrinsics do not actually need backend-specific
behaviors to be implemented, instead relying on methods already in
rustc_codegen_ssa. So, extract those methods out to rustc_codegen_ssa,
so that each backend doesn't need to reimplement the same code.
Move `rustllvm` into `compiler/rustc_llvm`
The `rustllvm` directory is not self-contained, it contains C++ code built by a build script of the `rustc_llvm` crate which is then linked into that crate.
So it makes sense to make `rustllvm` a part of `rustc_llvm` and move it into its directory.
I replaced `rustllvm` with more obvious `llvm-wrapper` as the subdirectory name, but something like `llvm-adapter` would work as well, other suggestions are welcome.
To make things more confusing, the Rust side of FFI functions defined in `rustllvm` can be found in `rustc_codegen_llvm` rather than in `rustc_llvm`. Perhaps they need to be moved as well, but this PR doesn't do that.
The presence of multiple LLVM-related directories in `src` (`llvm-project`, `rustllvm`, `librustc_llvm`, `librustc_codegen_llvm` and their predecessors) historically confused me and made me wonder about their purpose.
With this PR we will have LLVM itself (`llvm-project`), a FFI crate (`rustc_llvm`, kind of `llvm-sys`) and a codegen backend crate using LLVM through the FFI crate (`rustc_codegen_llvm`).
If a symbol name can only be imported from one place for a type, and
as long as it was not glob-imported anywhere in the current crate, we
can trim its printed path and print only the name.
This has wide implications on error messages with types, for example,
shortening `std::vec::Vec` to just `Vec`, as long as there is no other
`Vec` importable anywhere.
This adds a new '-Z trim-diagnostic-paths=false' option to control this
feature.
On the good path, with no diagnosis printed, we should try to avoid
issuing this query, so we need to prevent trimmed_def_paths query on
several cases.
This change also relies on a previous commit that differentiates
between `Debug` and `Display` on various rustc types, where the latter
is trimmed and presented to the user and the former is not.
Make to_immediate/from_immediate configurable by backends
`librustc_codegen_ssa` has the concept of an immediate vs. memory type, and `librustc_codegen_llvm` uses this distinction to implement `bool`s being `i8` in memory, and `i1` in immediate contexts. However, some of that implementation leaked into `codegen_ssa` when converting to/from immediate values. So, move those methods into builder traits, so that behavior can be configured by backends.
This is useful if a backend is able to keep bools as bools, or, needs to do more trickery than just bools to bytes.
(Note that there's already a large amount of things abstracted with "immediate types" - this is just bringing this particular thing in line to be abstracted as well)
---
Pinging @eddyb since that's who I was talking about this change with when they suggested I submit a PR.
This commit changes `uncached_llvm_type` so that a named struct type
(with an empty name) is always created when the `fewer_names` option
is enabled. By skipping the generation of names, we can improve perf.
Giving `LLVMStructCreateNamed` an empty name works because LLVM will
perform random renames to avoid collisions.
Signed-off-by: David Wood <david@davidtw.co>
This commit removes the obsolete printer and replaces all uses of it
with `FmtPrinter`. Of the replaced uses, all but one use was in `debug!`
logging, two cases were notable:
- `MonoItem::to_string` is used in `-Z print-mono-items` and therefore
affects the output of all codegen-units tests.
- `DefPathBasedNames` was used in `librustc_codegen_llvm/type_of.rs`
with `LLVMStructCreateNamed` and that'll now get different values, but
this should result in no functional change.
Signed-off-by: David Wood <david@davidtw.co>
