I added a test case which does not compile today, and required changes on
privacy's side of things to get right. Additionally, this moves a good bit of
logic which did not belong in reachability into privacy.
All of reachability should solely be responsible for determining what the
reachable surface area of a crate is given the exported surface area (where the
exported surface area is that which is usable by external crates).
Privacy will now correctly figure out what's exported by deeply looking
through reexports. Previously if a module were reexported under another name,
nothing in the module would actually get exported in the executable. I also
consolidated the phases of privacy to be clearer about what's an input to what.
The privacy checking pass no longer uses the notion of an "all public" path, and
the embargo visitor is no longer an input to the checking pass.
Currently the embargo visitor is built as a saturating analysis because it's
unknown what portions of the AST are going to get re-exported.
These two attributes are no longer useful now that Rust has decided to leave
segmented stacks behind. It is assumed that the rust task's stack is always
large enough to make an FFI call (due to the stack being very large).
There's always the case of stack overflow, however, to consider. This does not
change the behavior of stack overflow in Rust. This is still normally triggered
by the __morestack function and aborts the whole process.
C stack overflow will continue to corrupt the stack, however (as it did before
this commit as well). The future improvement of a guard page at the end of every
rust stack is still unimplemented and is intended to be the mechanism through
which we attempt to detect C stack overflow.
Closes#8822Closes#10155
This isn't quite as fancy as the struct in #9913, but I'm not sure we should be exposing crate names/hashes of the types. That being said, it'd be pretty easy to extend this (the deterministic hashing regardless of what crate you're in was the hard part).
Previously, all functions called by a reachable function were considered
reachable, but this is only the case if the original function was possibly
inlineable (if it's type generic or #[inline]-flagged).
When re-exporting a trait/structure/enum, then we need to propagate the
reachability of the type through the methods that are defined on it.
Closes#9906Closes#9968
This commit resumes management of the stack boundaries and limits when switching
between tasks. This additionally leverages the __morestack function to run code
on "stack overflow". The current behavior is to abort the process, but this is
probably not the best behavior in the long term (for deails, see the comment I
wrote up in the stack exhaustion routine).
This fixes a bug in which the visibility rules were approximated by
reachability, but forgot to cover the case where a 'pub use' reexports a private
item. This fixes the commit by instead using the results of the privacy pass of
the compiler to create the initial working set of the reachability pass.
This may have the side effect of increasing the size of metadata, but it's
difficult to avoid for correctness purposes sadly.
Closes#9790
This makes sure that the top-level crate name is correct when emitting log
statements for a monomorphized function in another crate. This happens by
tracing the monomorphized ID back to the external source and then using that
crate index to get the name of the crate.
Closes#3046
It is simply defined as `f64` across every platform right now.
A use case hasn't been presented for a `float` type defined as the
highest precision floating point type implemented in hardware on the
platform. Performance-wise, using the smallest precision correct for the
use case greatly saves on cache space and allows for fitting more
numbers into SSE/AVX registers.
If there was a use case, this could be implemented as simply a type
alias or a struct thanks to `#[cfg(...)]`.
Closes#6592
The mailing list thread, for reference:
https://mail.mozilla.org/pipermail/rust-dev/2013-July/004632.html
If an item is skipped due to it being unreachable or for some optimization, then
it shouldn't be encoded into the metadata (because it wasn't present in the
first place).
This fixes private statics and functions from being usable cross-crates, along
with some bad privacy error messages. This is a reopening of #8365 with all the
privacy checks in privacy.rs instead of resolve.rs (where they should be
anyway).
These maps of exported items will hopefully get used for generating
documentation by rustdoc
Closes#8592
Progress on #7981
This doesn't completely close the issue because `struct A;` is still allowed, and it's a much larger change to disallow that. I'm also not entirely sure that we want to disallow that. Regardless, punting that discussion to the issue instead.
This fixes private statics and functions from being usable cross-crates, along
with some bad privacy error messages. This is a reopening of #8365 with all the
privacy checks in privacy.rs instead of resolve.rs (where they should be
anyway).
These maps of exported items will hopefully get used for generating
documentation by rustdoc
Closes#8592
If a static is flagged as address_insignificant, then for LLVM to actually
perform the relevant optimization it must have an internal linkage type. What
this means, though, is that the static will not be available to other crates.
Hence, if you have a generic function with an inner static, it will fail to link
when built as a library because other crates will attempt to use the inner
static externally.
This gets around the issue by inlining the static into the metadata. The same
relevant optimization is then applied separately in the external crate. What
this ends up meaning is that all statics tagged with #[address_insignificant]
will appear at most once per crate (by value), but they could appear in multiple
crates.
This should be the last blocker for using format! ...
This doesn't close any bugs as the goal is to convert the parameter to by-value, but this is a step towards being able to make guarantees about `&T` pointers (where T is Freeze) to LLVM.
In #8185 cross-crate condition handlers were fixed by ensuring that globals
didn't start appearing in different crates with different addressed. An
unfortunate side effect of that pull request is that constants weren't inlined
across crates (uint::bits is unknown to everything but libstd).
This commit fixes this inlining by using the `available_eternally` linkage
provided by LLVM. It partially reverts #8185, and then adds support for this
linkage type. The main caveat is that not all statics could be inlined into
other crates. Before this patch, all statics were considered "inlineable items",
but an unfortunate side effect of how we deal with `&static` and `&[static]`
means that these two cases cannot be inlined across crates. The translation of
constants was modified to propogate this condition of whether a constant
should be considered inlineable into other crates.
Closes#9036
In #8185 cross-crate condition handlers were fixed by ensuring that globals
didn't start appearing in different crates with different addressed. An
unfortunate side effect of that pull request is that constants weren't inlined
across crates (uint::bits is unknown to everything but libstd).
This commit fixes this inlining by using the `available_eternally` linkage
provided by LLVM. It partially reverts #8185, and then adds support for this
linkage type. The main caveat is that not all statics could be inlined into
other crates. Before this patch, all statics were considered "inlineable items",
but an unfortunate side effect of how we deal with `&static` and `&[static]`
means that these two cases cannot be inlined across crates. The translation of
constants was modified to propogate this condition of whether a constant
should be considered inlineable into other crates.
Closes#9036
While they may have the same name within various scopes, this changes static
names to use path_pretty_name to append some hash information at the end of the
symbol. We're then guaranteed that each static has a unique NodeId, so this
NodeId is as the "hash" of the pretty name.
Closes#9188
Remove these in favor of the two traits themselves and the wrapper
function std::from_str::from_str.
Add the function std::num::from_str_radix in the corresponding role for
the FromStrRadix trait.
While they may have the same name within various scopes, this changes static
names to use path_pretty_name to append some hash information at the end of the
symbol. We're then guaranteed that each static has a unique NodeId, so this
NodeId is as the "hash" of the pretty name.
Closes#9188
The trait will keep the `Iterator` naming, but a more concise module
name makes using the free functions less verbose. The module will define
iterables in addition to iterators, as it deals with iteration in
general.
These commits fix bugs related to identically named statics in functions of implementations in various situations. The commit messages have most of the information about what bugs are being fixed and why.
As a bonus, while I was messing around with name mangling, I improved the backtraces we'll get in gdb by removing `__extensions__` for the trait/type being implemented and by adding the method name as well. Yay!
There are 6 new compiler recognised attributes: deprecated, experimental,
unstable, stable, frozen, locked (these levels are taken directly from
Node's "stability index"[1]). These indicate the stability of the
item to which they are attached; e.g. `#[deprecated] fn foo() { .. }`
says that `foo` is deprecated.
This comes with 3 lints for the first 3 levels (with matching names) that
will detect the use of items marked with them (the `unstable` lint
includes items with no stability attribute). The attributes can be given
a short text note that will be displayed by the lint. An example:
#[warn(unstable)]; // `allow` by default
#[deprecated="use `bar`"]
fn foo() { }
#[stable]
fn bar() { }
fn baz() { }
fn main() {
foo(); // "warning: use of deprecated item: use `bar`"
bar(); // all fine
baz(); // "warning: use of unmarked item"
}
The lints currently only check the "edges" of the AST: i.e. functions,
methods[2], structs and enum variants. Any stability attributes on modules,
enums, traits and impls are not checked.
[1]: http://nodejs.org/api/documentation.html
[2]: the method check is currently incorrect and doesn't work.
As with the previous commit, this is targeted at removing the possibility of
collisions between statics. The main use case here is when there's a
type-parametric function with an inner static that's compiled as a library.
Before this commit, any impl would generate a path item of "__extensions__".
This changes this identifier to be a "pretty name", which is either the last
element of the path of the trait implemented or the last element of the type's
path that's being implemented. That doesn't quite cut it though, so the (trait,
type) pair is hashed and again used to append information to the symbol.
Essentially, __extensions__ was removed for something nicer for debugging, and
then some more information was added to symbol name by including a hash of the
trait being implemented and type it's being implemented for. This should prevent
colliding names for inner statics in regular functions with similar names.
Before, the path name for all items defined in methods of traits and impls never
took into account the name of the method. This meant that if you had two statics
of the same name in two different methods the statics would end up having the
same symbol named (even after mangling) because the path components leading to
the symbol were exactly the same (just __extensions__ and the static name).
It turns out that if you add the symbol "A" twice to LLVM, it automatically
makes the second one "A1" instead of "A". What this meant is that in local crate
compilations we never found this bug. Even across crates, this was never a
problem. The problem arises when you have generic methods that don't get
generated at compile-time of a library. If the statics were re-added to LLVM by
a client crate of a library in a different order, you would reference different
constants (the integer suffixes wouldn't be guaranteed to be the same).
This fixes the problem by adding the method name to symbol path when building
the ast_map. In doing so, two symbols in two different methods are disambiguated
against.
Whenever a generic function was encountered, only the top-level items were
recursed upon, even though the function could contain items inside blocks or
nested inside of other expressions. This fixes the existing code from traversing
just the top level items to using a Visitor to deeply recurse and find any items
which need to be translated.
This was uncovered when building code with --lib, because the encode_symbol
function would panic once it found that an item hadn't been translated.
Closes#8134
