add mips64-gnu and mips64el-gnu targets
With this commit one can build no_core (and probably no_std as well)
Rust programs for these targets. It's not yet possible to cross compile
std for these targets because rust-lang/libc doesn't know about the
mips64 architecture.
These targets have been tested by cross compiling the "smallest hello"
program (see code below) and then running it under QEMU.
``` rust
extern {
fn puts(_: *const u8);
}
fn start(_: isize, _: *const *const u8) -> isize {
unsafe {
let msg = b"Hello, world!\0";
puts(msg as *const _ as *const u8);
}
0
}
trait Copy {}
trait Sized {}
```
cc #36015
r? @alexcrichton
cc @brson
The cabi stuff is likely wrong. I just copied cabi_mips source and changed some `4`s to `8`s and `32`s to `64`s. It was enough to get libc's `puts` to work but I'd like someone familiar with this module to check it.
A new target, `s390x-unknown-linux-gnu`, has been added to the compiler
and can be used to build no_core/no_std Rust programs.
Known limitations:
- librustc_trans/cabi_s390x.rs is missing. This means no support for
`extern "C" fn`.
- No support for this arch in libc. This means std can be cross compiled
for this target.
With this commit one can build no_core (and probably no_std as well)
Rust programs for these targets. It's not yet possible to cross compile
std for these targets because rust-lang/libc doesn't know about the
mips64 architecture.
These targets have been tested by cross compiling the "smallest hello"
program (see code below) and then running it under QEMU.
``` rust
#![feature(start)]
#![feature(lang_items)]
#![feature(no_core)]
#![no_core]
#[link(name = "c")]
extern {
fn puts(_: *const u8);
}
#[start]
fn start(_: isize, _: *const *const u8) -> isize {
unsafe {
let msg = b"Hello, world!\0";
puts(msg as *const _ as *const u8);
}
0
}
#[lang = "copy"]
trait Copy {}
#[lang = "sized"]
trait Sized {}
```
These targets cover OpenWRT 15.05 devices, which use the soft float ABI
and the uclibc library. None of the other built-in mips targets covered
those devices (mips-gnu is hard float and glibc-based, mips-musl is
musl-based).
With this commit one can now build std for these devices using these
commands:
```
$ configure --enable-rustbuild --target=mips-unknown-linux-uclibc
$ make
```
cc #35673
add GNU make files for arm-unknown-linux-musleabi
For Yocto (Embedded Linux meta distro) Rust is provided via the [meta-rust layer](https://github.com/meta-rust/meta-rust). In this project there have been patches to add `arm-unknown-linux-musleabi`. Rust recently acquired that support via #35060 but only for rustbuild. meta-rust is currently only able to build Rust support with the existing GNU Makefiles. This adds `arm-unknown-linux-musleabi` support to Rust for the GNU Makefiles until meta-rust is able to sort out why using rustbuild does not work for it.
/cc @srwalter @derekstraka @jmesmon @japaric
The arm-unknown-linux-musleabi target used in meta-rust for Yocto didn't
explicitly set the arch to ARMv6 and soft float but was instead done via
target spec files and never had the compiler running on the target.
The targets are:
- `arm-unknown-linux-musleabi`
- `arm-unknown-linux-musleabihf`
- `armv7-unknown-linux-musleabihf`
These mirror the existing `gnueabi` targets.
All of these targets produce fully static binaries, similar to the
x86 MUSL targets.
For now these targets can only be used with `--rustbuild` builds, as
https://github.com/rust-lang/compiler-rt/pull/22 only made the
necessary compiler-rt changes in the CMake configs, not the plain
GNU Make configs.
I've tested these targets GCC 5.3.0 compiled again musl-1.1.12
(downloaded from http://musl.codu.org/). An example `./configure`
invocation is:
```
./configure \
--enable-rustbuild
--target=arm-unknown-linux-musleabi \
--musl-root="$MUSL_ROOT"
```
where `MUSL_ROOT` points to the `arm-linux-musleabi` prefix.
Usually that path will be of the form
`/foobar/arm-linux-musleabi/arm-linux-musleabi`.
Usually the cross-compile toolchain will live under
`/foobar/arm-linux-musleabi/bin`. That path should either by added
to your `PATH` variable, or you should add a section to your
`config.toml` as follows:
```
[target.arm-unknown-linux-musleabi]
cc = "/foobar/arm-linux-musleabi/bin/arm-linux-musleabi-gcc"
cxx = "/foobar/arm-linux-musleabi/bin/arm-linux-musleabi-g++"
```
As a prerequisite you'll also have to put a cross-compiled static
`libunwind.a` library in `$MUSL_ROOT/lib`. This is similar to [how
the x86_64 MUSL targets are built]
(https://doc.rust-lang.org/book/advanced-linking.html).
Soon the LLVM upgrade (#34743) will require an updated CMake installation, and
the easiest way to do this was to upgrade the Ubuntu version of the bots to
16.04. This in turn brings in a new MIPS compiler on the linux-cross builder,
which is now from the "official" ubuntu repositories. Unfortunately these
new compilers don't support compiling with the `-msoft-float` flag like we're
currently passing, causing compiles to fail.
This commit removes these flags as it's not clear *why* they're being passed, as
the mipsel targets also don't have it. At least if it's not supported by a
debian default compiler, perhaps it's not too relevant to support?
Apparently the gcc on our dist bot is so old and/or obscure that the default
`-m32` switch doesn't think it can generate i686 code (or something like that).
The compiler-rt build system probes for the `__i686__` define in GCC to compile
for an i686 (vs i386) target, so this was failing on the bots.
This tweaks instead to pass `-march=i686` on i686-unknown-linux-gnu to C code to
ensure that we're compiling for i686 instead of i386. This should hopefully not
actually have an impact other than maybe doing some random optimization it
wasn't able to do so before. In theory this isn't making the target less
compatible as all Rust code is already compiled for i686.
Hopefully closes#34572
Forcing them to be embedded in makefiles precludes being able to run them in
rustbuild, and adding them to compiletest gives us a great way to leverage
future enhancements to our "all encompassing test suite runner" as well as just
moving more things into Rust.
All tests are still Makefile-based in the sense that they rely on `make` being
available to run them, but there's no longer any Makefile-trickery to run them
and rustbuild can now run them out of the box as well.
rustc: Add an i586-pc-windows-msvc target
Similarly to #31629 where an i586-unknown-linux-gnu target was added, there is
sometimes a desire to compile for x86 Windows as well where SSE2 is disabled.
This commit mirrors the i586-unknown-linux-gnu target and simply adds a variant
for Windows as well.
This is motivated by a recent [Gecko bug][ff] where crashes were seen on 32-bit
Windows due to users having CPUs that don't support SSE2 instructions. It was
requested that we could have non-SSE2 builds of the standard library available
so they could continue to use vanilla releases and nightlies.
[ff]: https://bugzilla.mozilla.org/show_bug.cgi?id=1253202
Similarly to #31629 where an i586-unknown-linux-gnu target was added, there is
sometimes a desire to compile for x86 Windows as well where SSE2 is disabled.
This commit mirrors the i586-unknown-linux-gnu target and simply adds a variant
for Windows as well.
This is motivated by a recent [Gecko bug][ff] where crashes were seen on 32-bit
Windows due to users having CPUs that don't support SSE2 instructions. It was
requested that we could have non-SSE2 builds of the standard library available
so they could continue to use vanilla releases and nightlies.
[ff]: https://bugzilla.mozilla.org/show_bug.cgi?id=1253202
The `--disable-jemalloc` configure option has a failure mode where it will
create a distribution that is not compatible with other compilers. For example
the nightly for Linux will assume that it will link to jemalloc by default as
an allocator for executable crates. If, however, a standard library is used
which was built via `./configure --disable-jemalloc` then this will fail
because the jemalloc crate wasn't built.
While this seems somewhat reasonable as a niche situation, the same mechanism is
used for disabling jemalloc for platforms that just don't support it. For
example if the rumprun target is compiled then the sibiling Linux target *also*
doesn't have jemalloc. This is currently a problem for our cross-build nightlies
which build many targets. If rumprun is also built, it will disable jemalloc for
all targets, which isn't desired.
This commit moves the platform-specific disabling of jemalloc as hardcoded logic
into the makefiles that is scoped per-platform. This way when configuring
multiple targets **without the `--disable-jemalloc` option specified** all
targets will get jemalloc as they should.
The `--disable-jemalloc` configure option has a failure mode where it will
create a distribution that is not compatible with other compilers. For example
the nightly for Linux will assume that it will link to jemalloc by default as
an allocator for executable crates. If, however, a standard library is used
which was built via `./configure --disable-jemalloc` then this will fail
because the jemalloc crate wasn't built.
While this seems somewhat reasonable as a niche situation, the same mechanism is
used for disabling jemalloc for platforms that just don't support it. For
example if the rumprun target is compiled then the sibiling Linux target *also*
doesn't have jemalloc. This is currently a problem for our cross-build nightlies
which build many targets. If rumprun is also built, it will disable jemalloc for
all targets, which isn't desired.
This commit moves the platform-specific disabling of jemalloc as hardcoded logic
into the makefiles that is scoped per-platform. This way when configuring
multiple targets **without the `--disable-jemalloc` option specified** all
targets will get jemalloc as they should.
Right now the compiler's we're using actually default to armv7/thumb2 I believe,
so this should help push them back to what the arm-unknown-linux-* targets are
for. This at least matches that clang does for the `arm-unknown-linux-gnueabihf`
target which is to map it to an armv6 architecture.
Closes#31787
Right now the compiler's we're using actually default to armv7/thumb2 I believe,
so this should help push them back to what the arm-unknown-linux-* targets are
for. This at least matches that clang does for the `arm-unknown-linux-gnueabihf`
target which is to map it to an armv6 architecture.
Closes#31787
Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
r? @alexcrichton
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
The cross prefix was not likely the actual compiler that needed to be used, but
rather the standard `arm-linux-gnueabihf-gcc` compiler can just be used with
`-march=armv7`.
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
