Don't perform any new queries while reading a query result on disk
In addition to being very confusing, this can cause us to add dep node edges between two queries that would not otherwise have an edge.
We now panic if any new dep node edges are created during the deserialization of a query result. This requires serializing the full `AdtDef` to disk, instead of just serializing the `DefId` and invoking the `adt_def` query during deserialization.
I'll probably split this up into several smaller PRs for perf runs.
Remove special-cased stable hashing for HIR module
All other 'containers' (e.g. `impl` blocks) hashed their contents
in the normal, order-dependent way. However, `Mod` was hashing
its contents in a (sort-of) order-independent way. However, the
exact order is exposed to consumers through `Mod.item_ids`,
and through query results like `hir_module_items`. Therefore,
stable hashing needs to take the order of items into account,
to avoid fingerprint ICEs.
Unforuntately, I was unable to directly build a reproducer
for the ICE, due to the behavior of `Fingerprint::combine_commutative`.
This operation swaps the upper and lower `u64` when constructing the
result, which makes the function non-associative. Since we start
the hashing of module items by combining `Fingerprint::ZERO` with
the first item, it's difficult to actually build an example where
changing the order of module items leaves the final hash unchanged.
However, this appears to have been hit in practice in #92218
While we're not able to reproduce it, the fact that proc-macros
are involved (which can give an entire module the same span, preventing
any span-related invalidations) makes me confident that the root
cause of that issue is our method of hashing module items.
This PR removes all of the special handling for `Mod`, instead deriving
a `HashStable` implementation. This makes `Mod` consistent with other
'contains' like `Impl`, which hash their contents through the typical
derive of `HashStable`.
All other 'containers' (e.g. `impl` blocks) hashed their contents
in the normal, order-dependent way. However, `Mod` was hashing
its contents in a (sort-of) order-independent way. However, the
exact order is exposed to consumers through `Mod.item_ids`,
and through query results like `hir_module_items`. Therefore,
stable hashing needs to take the order of items into account,
to avoid fingerprint ICEs.
Unforuntately, I was unable to directly build a reproducer
for the ICE, due to the behavior of `Fingerprint::combine_commutative`.
This operation swaps the upper and lower `u64` when constructing the
result, which makes the function non-associative. Since we start
the hashing of module items by combining `Fingerprint::ZERO` with
the first item, it's difficult to actually build an example where
changing the order of module items leaves the final hash unchanged.
However, this appears to have been hit in practice in #92218
While we're not able to reproduce it, the fact that proc-macros
are involved (which can give an entire module the same span, preventing
any span-related invalidations) makes me confident that the root
cause of that issue is our method of hashing module items.
This PR removes all of the special handling for `Mod`, instead deriving
a `HashStable` implementation. This makes `Mod` consistent with other
'contains' like `Impl`, which hash their contents through the typical
derive of `HashStable`.
Currently, you can use `#[rustc_clean]` to assert to that a particular
query (technically, a `DepNode`) is green or red. However, a green
`DepNode` does not mean that the query result was actually deserialized
from disk - we might have never re-run a query that needed the result.
Some incremental tests are written as regression tests for ICEs that
occured during query result decoding. Using
`#[rustc_clean(loaded_from_disk="typeck")]`, you can now assert
that the result of a particular query (e.g. `typeck`) was actually
loaded from disk, in addition to being green.
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
Enable verification for 1/32th of queries loaded from disk
This is a limited enabling of incremental verification for query results loaded from disk, which previously did not run without -Zincremental-verify-ich. If enabled for all queries, we see a probably unacceptable hit of ~50% in the worst case, so this pairs back the verification to a more limited set based on the hash key.
Per collected [perf results](https://github.com/rust-lang/rust/pull/84227#issuecomment-953350582), this is a regression of at most 7% on coercions opt incr-unchanged, and typically less than 0.5% on other benchmarks (largely limited to incr-unchanged). I believe this is acceptable performance to land, and we can either ratchet it up or down fairly easily.
We have no real sense of whether this will lead to a large amount of assertions in the wild, but since those assertions may lead to miscompilations today, it seems potentially warranted. We have a good bit of lead time until the next stable release, though the holiday season will also start soon; we may wish to discuss the timing of enabling this and weigh the desire to prevent (possible) miscompilations against assertions.
cc `@rust-lang/wg-incr-comp`
Revert "Add rustc lint, warning when iterating over hashmaps"
Fixes perf regressions introduced in https://github.com/rust-lang/rust/pull/90235 by temporarily reverting the relevant PR.
Build the query vtable directly.
Continuation of https://github.com/rust-lang/rust/pull/89978.
This shrinks the query interface and attempts to reduce the amount of function pointer calls.
Add support for artifact size profiling
This adds support for profiling artifact file sizes (incremental compilation artifacts and query cache to begin with).
Eventually we want to track this in perf.rlo so we can ensure that file sizes do not change dramatically on each pull request.
This relies on support in measureme: https://github.com/rust-lang/measureme/pull/169. Once that lands we can update this PR to not point to a git dependency.
This was worked on together with `@michaelwoerister.`
r? `@wesleywiser`
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
Index and hash HIR as part of lowering
Part of https://github.com/rust-lang/rust/pull/88186
~Based on https://github.com/rust-lang/rust/pull/88880 (see merge commit).~
Once HIR is lowered, it is later indexed by the `index_hir` query and hashed for `crate_hash`. This PR moves those post-processing steps to lowering itself. As a side objective, the HIR crate data structure is refactored as an `IndexVec<LocalDefId, Option<OwnerInfo<'hir>>>` where `OwnerInfo` stores all the relevant information for an HIR owner.
r? `@michaelwoerister`
cc `@petrochenkov`
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
This was already only enabled in debug_assertions builds. Generally, it seems
like most use cases that would use this could also use the -Zself-profile flag
which also tracks cache hits (in all builds), and so the extra cfg's and such
are not really necessary.
This is largely just a small cleanup though, which primarily is intended to make
other changes easier by avoiding the need to deal with this field.
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
Specify a log level in tracing instrument macro explicitly.
Additionally reduce the used log level from a default info level to a
debug level (all of those appear to be developer oriented logs, so there
should be no need to include them in release builds).
Refactor query forcing
The control flow in those functions was very complex, with several layers of continuations.
I tried to simplify the implementation, while keeping essentially the same logic.
Now, all code paths go through `try_execute_query` for the actual query execution.
Communication with the `dep_graph` and the live caches are the only difference between query getting/ensuring/forcing.
