4161: lsp-types 0.74 r=kjeremy a=kjeremy
* Fixes a bunch of param types to take partial progress into account.
* Will allow us to support insert/replace text in completions
Co-authored-by: kjeremy <kjeremy@gmail.com>
4113: Support returning non-hierarchical symbols r=matklad a=kjeremy
If `hierarchicalDocumentSymbolSupport` is not true in the client capabilites
then it does not support the `DocumentSymbol[]` return type from the
`textDocument/documentSymbol` request and we must fall back to `SymbolInformation[]`.
This is one of the few requests that use the client capabilities to
differentiate between return types and could cause problems for clients.
See https://github.com/microsoft/language-server-protocol/pull/538#issuecomment-442510767 for more context.
Found while looking at #144
4136: add support for cfg feature attributes on expression #4063 r=matklad a=bnjjj
close issue #4063
4141: Fix typo r=matklad a=Veetaha
4142: Remove unnecessary async from vscode language client creation r=matklad a=Veetaha
Co-authored-by: kjeremy <kjeremy@gmail.com>
Co-authored-by: Benjamin Coenen <5719034+bnjjj@users.noreply.github.com>
Co-authored-by: veetaha <veetaha2@gmail.com>
4133: main: eagerly prime goto-definition caches r=matklad a=BurntSushi
This commit eagerly primes the caches used by goto-definition by
submitting a "phantom" goto-definition request. This is perhaps a bit
circuitous, but it does actually get the job done. The result of this
change is that once RA is finished its initial loading of a project,
goto-definition requests are instant. There don't appear to be any more
surprise latency spikes.
This _partially_ addresses #1650 in that it front-loads the latency of the
first goto-definition request, which in turn makes it more predictable and
less surprising. In particular, this addresses the use case where one opens
the text editor, starts reading code for a while, and only later issues the
first goto-definition request. Before this PR, that first goto-definition request
is guaranteed to have high latency in any reasonably sized project. But
after this PR, there's a good chance that it will now be instant.
What this _doesn't_ address is that initial loading time. In fact, it makes it
longer by adding a phantom goto-definition request to the initial startup
sequence. However, I observed that while this did make initial loading
slower, it was overall a somewhat small (but not insignificant) fraction
of initial loading time.
-----
At least, the above is what I _want_ to do. The actual change in this PR is just a proof-of-concept. I came up with after an evening of printf-debugging. Once I found the spot where this cache priming should go, I was unsure of how to generate a phantom input. So I just took an input I knew worked from my printf-debugging and hacked it in. Obviously, what I'd like to do is make this more general such that it will always work.
I don't know whether this is the "right" approach or not. My guess is that there is perhaps a cleaner solution that more directly primes whatever cache is being lazily populated rather than fudging the issue with a phantom goto-definition request.
I created this as a draft PR because I'd really like help making this general. I think whether y'all want to accept this patch is perhaps a separate question. IMO, it seems like a good idea, but to be honest, I'm happy to maintain this patch on my own since it's so trivial. But I would like to generalize it so that it will work in any project.
My thinking is that all I really need to do is find a file and a token somewhere in the loaded project, and then use that as input. But I don't quite know how to connect all the data structures to do that. Any help would be appreciated!
cc @matklad since I've been a worm in your ear about this problem. :-)
Co-authored-by: Andrew Gallant <jamslam@gmail.com>
This commit makes RA more aggressive about eagerly priming the caches.
In particular, this fixes an issue where even after RA was done priming
its caches, an initial goto-definition request would have very high
latency. This fixes that issue by requesting syntax highlighting for
everything. It is presumed that this is a tad wasteful, but not overly
so.
This commit also tweaks the logic that determines when the cache is
primed. Namely, instead of just priming it when the state is loaded
initially, we attempt to prime it whenever some state changes. This
fixes an issue where if a modification notification is seen before cache
priming is done, it would stop the cache priming early.
4125: Avoid lossy OsString conversions r=matklad a=lnicola
This is a bit invasive, and perhaps for not much benefit since non-UTF-8 environment variables don't work anyway.
Co-authored-by: Laurențiu Nicola <lnicola@dend.ro>
If `hierarchicalDocumentSymbolSupport` is not true in the client capabilites
then it does not support the `DocumentSymbol[]` return type from the
`textDocument/documentSymbol` request and we must fall back to `SymbolInformation[]`.
This is one of the few requests that use the client capabilities to
differentiate between return types and could cause problems for clients.
See https://github.com/microsoft/language-server-protocol/pull/538#issuecomment-442510767 for more context.
Found while looking at #144
4101: Panic proc macro srv if read request failed r=matklad a=edwin0cheng
This PR fixed a bug when the rust-analyzer is killed suddenly, the `rust-analyzer proc-macro` will become stale.
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
I might be reading this wrong, but it looks like we are setting it to
essentially arbitrary string at the moment, as there are no defined
order on the items in the *set* of completions.
3954: Improve autocompletion by looking on the type and name r=matklad a=bnjjj
This tweet (https://twitter.com/tjholowaychuk/status/1248918374731714560) gaves me the idea to implement that in rust-analyzer.
Basically for this first example I made some examples when we are in a function call definition. I look on the parameter list to prioritize autocompletions for the same types and if it's the same type + the same name then it's displayed first in the completion list.
So here is a draft, first step to open a discussion and know what you think about the implementation. It works (cf tests) but maybe I can make a better implementation at some places. Be careful the code needs some refactoring to be better and concise.
PS: It was lot of fun writing this haha
Co-authored-by: Benjamin Coenen <5719034+bnjjj@users.noreply.github.com>
In general, there should be no reason to call `.to_string_lossy`.
If you want to display the path, use `.display()`.
If you want to pass the path to an OS API (like std::process::Command)
than use `PathBuf` or `OsString`.
4092: feat: run ignored tests r=matklad a=hdevalke
I started making some exercices on https://exercism.io/ and a lot of test have the `#[ignore]` attribute.
The `Run Test|Debug` code lens show up, but running the test results in:
```
running 1 test
test test_one_piece ... ignored
test result: ok. 0 passed; 0 failed; 1 ignored; 0 measured; 5 filtered out
```
This pull request adds the `--ignored` flag if needed.
Co-authored-by: Hannes De Valkeneer <hannes@de-valkeneer.be>
This is a quick way to implement unresolved reference diagnostics.
For example, adding to VS Code config
"editor.tokenColorCustomizationsExperimental": {
"unresolvedReference": "#FF0000"
},
will highlight all unresolved refs in red.
3996: Fix path for proc-macro in nightly / stable release r=matklad a=edwin0cheng
I messed up that I forget we use different executable names for nightly / stable release, I changed to use the current executable name instead.
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
In textmate, keyword.control is used for all kinds of things; in fact,
the default scope mapping for keyword is keyword.control!
So let's add a less ambiguous controlFlow modifier
See Microsoft/vscode#94367
Until now cargo commands with the -p flag would pass the package name only.
It doesn't play super well with the toml Renaming dependencies feature.
This commit specifies the package name and version when a cargo command is run with the -p flag,
to avoid ambiguities.
3587: Use WorkDoneProgress LSP API for initial load r=matklad a=slyngbaek
Addresses #3283
Rather than using custom UI for showing the loaded state. Rely
on the WorkDoneProgress API in 3.15.0
https://microsoft.github.io/language-server-protocol/specification#workDoneProgress.
No client-side work was necessary. The UI is not exactly what is
described in the issue but afaict that's how VS Code implements the LSP
API.
- The WorkDoneProgressEnd does not appear to display its message
contents (controlled by vscode)
Co-authored-by: Steffen Lyngbaek <steffenlyngbaek@gmail.com>
Addresses #3283
Rather than using custom UI for showing the loaded state. Rely
on the WorkDoneProgress API in 3.15.0
https://microsoft.github.io/language-server-protocol/specification#workDoneProgress.
No client-side work was necessary. The UI is not exactly what is
described in the issue but afaict that's how VS Code implements the LSP
API.
- The WorkDoneProgressEnd does not appear to display its message
contents (controlled by vscode)
3561: feat: add debug code lens r=matklad a=hdevalke
Refs #3539
3577: Protect against infinite macro expansion in def collector r=edwin0cheng a=flodiebold
Something I noticed while trying to make macro expansion more resilient against errors.
There was a test for this, but it wasn't actually working because the first recursive expansion failed. (The comma...)
Even with this limit, that test (when fixed) still takes some time to pass because of the exponential growth of the expansions, so I disabled it and added a different one without growth.
CC @edwin0cheng
Co-authored-by: Hannes De Valkeneer <hannes@de-valkeneer.be>
Co-authored-by: hdevalke <2261239+hdevalke@users.noreply.github.com>
Co-authored-by: Florian Diebold <florian.diebold@freiheit.com>
3543: Parameter inlay hint separate from variable type inlay? #2876 r=matklad a=slyngbaek
Add setting to allow enabling either type inlay hints or parameter
inlay hints or both. Group the the max inlay hint length option
into the object.
- Add a new type for the inlayHint options.
- Add tests to ensure the inlays don't happen on the server side
Co-authored-by: Steffen Lyngbaek <steffenlyngbaek@gmail.com>
- Instead of a single object type, use several individual nested types
to allow toggling from the settings GUI
- Remove unused struct definitions
- Install and test that the toggles work
3549: Implement env! macro r=matklad a=edwin0cheng
This PR implements `env!` macro by adding following things:
1. Added `additional_outdirs` settings in vscode. (naming to be bikeshed)
2. Added `ExternSourceId` which is a wrapping for SourceRootId but only used in extern sources. It is because `OUT_DIR` is not belonged to any crate and we have to access it behind an `AstDatabase`.
3. This PR does not implement the `OUT_DIR` parsing from `cargo check`. I don't have general design about this, @kiljacken could we reuse some cargo watch code for that ?
~~Block on [#3536]~~
PS: After this PR , we (kind of) completed the `include!(concat!(env!('OUT_DIR'), "foo.rs")` macro call combo. [Exodia Obliterate!](https://www.youtube.com/watch?v=RfqNH3FoGi0)
Co-authored-by: Edwin Cheng <edwin0cheng@gmail.com>
- Updated naming of config
- Define struct in ra_ide and use remote derive in rust-analyzer/config
- Make inlayConfig type more flexible to support more future types
- Remove constructor only used in tests
Add setting to allow enabling either type inlay hints or parameter
inlay hints or both. Group the the max inlay hint length option
into the object.
- Add a new type for the inlayHint options.
- Add tests to ensure the inlays don't happen on the server side
3526: Silence "file out of workspace" errors r=matklad a=matklad
We really should fix this limitation of the VFS, but it's some way off
at the moment, so let's just silence the user-visible error for now.
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
3309: Find cargo toml up the fs r=matklad a=not-much-io
Currently rust-analyzer will look for Cargo.toml in the root of the project and if failing that then go down the filesystem until root.
This unfortunately wouldn't work automatically with (what I imagine is) a fairly common project structure. As an example with multiple languages like:
```
js/
..
rust/
Cargo.toml
...
```
Added this small change so rust-analyzer would glance one level up if not found in root or down the filesystem.
## Why not go deeper?
Could be problematic with large project vendored dependencies etc.
## Why not add a Cargo.toml manual setting option?
Loosely related and a good idea, however the convenience of having this automated also is hard to pass up.
## Testing?
Build a binary with various logs and checked it in a project with such a structure:
```
[ERROR ra_project_model] find_cargo_toml()
[ERROR ra_project_model] find_cargo_toml_up_the_fs()
[ERROR ra_project_model] entities: ReadDir("/workspaces/my-project")
[ERROR ra_project_model] candidate: "/workspaces/my-project/rust/Cargo.toml", exists: true
```
## Edge Cases?
If you have multiple Cargo.toml files one level deeper AND not in the root, will get whatever comes first (order undefined), example:
```
crate1/
Cargo.toml
crate2/
Cargo.toml
... (no root Cargo.toml)
```
However this is quite unusual and wouldn't have worked before either. This is only resolvable via manually choosing.
Co-authored-by: nmio <kristo.koert@gmail.com>
E.g. for `&{ some_string() }` in a context where a `&str` is expected, we
reported a mismatch inside the block. The problem is that we're passing an
expectation of `str` down, but the expectation is more of a hint in this case.
There's a long comment in rustc about this, which I just copied.
Also, fix reported location for type mismatches in macros.
