This is a [breaking-change]. The new rules require that, for an impl of a trait defined
in some other crate, two conditions must hold:
1. Some type must be local.
2. Every type parameter must appear "under" some local type.
Here are some examples that are legal:
```rust
struct MyStruct<T> { ... }
// Here `T` appears "under' `MyStruct`.
impl<T> Clone for MyStruct<T> { }
// Here `T` appears "under' `MyStruct` as well. Note that it also appears
// elsewhere.
impl<T> Iterator<T> for MyStruct<T> { }
```
Here is an illegal example:
```rust
// Here `U` does not appear "under" `MyStruct` or any other local type.
// We call `U` "uncovered".
impl<T,U> Iterator<U> for MyStruct<T> { }
```
There are a couple of ways to rewrite this last example so that it is
legal:
1. In some cases, the uncovered type parameter (here, `U`) should be converted
into an associated type. This is however a non-local change that requires access
to the original trait. Also, associated types are not fully baked.
2. Add `U` as a type parameter of `MyStruct`:
```rust
struct MyStruct<T,U> { ... }
impl<T,U> Iterator<U> for MyStruct<T,U> { }
```
3. Create a newtype wrapper for `U`
```rust
impl<T,U> Iterator<Wrapper<U>> for MyStruct<T,U> { }
```
Because associated types are not fully baked, which in the case of the
`Hash` trait makes adhering to this rule impossible, you can
temporarily disable this rule in your crate by using
`#![feature(old_orphan_check)]`. Note that the `old_orphan_check`
feature will be removed before 1.0 is released.
This commit performs a second pass over the `std::boxed` module, taking the
following actions:
* `boxed` is now stable
* `Box` is now stable
* `BoxAny` is removed in favor of a direct `impl Box<Any>`
* `Box::downcast` remains unstable while the name of the `downcast` family of
methods is determined.
This is a breaking change due to the removal of the `BoxAny` trait (note that
the `downcast` method still exists), and existing consumers of `BoxAny` simply
need to remove the import in their modules.
[breaking-change]
This patch marks `PartialEq`, `Eq`, `PartialOrd`, and `Ord` as
`#[stable]`, as well as the majorify of manual implementaitons of these
traits. The traits match the [reform
RFC](https://github.com/rust-lang/rfcs/pull/439).
Along the way, two changes are made:
* The recently-added type parameters for `Ord` and `Eq` are
removed. These were mistakenly added while adding them to `PartialOrd`
and `PartialEq`, but they don't make sense given the laws that are
required for (and use cases for) `Ord` and `Eq`.
* More explicit laws are added for `PartialEq` and `PartialOrd`,
connecting them to their associated mathematical concepts.
In the future, many of the impls should be generalized; see
since generalizing later is not a breaking change.
[breaking-change]
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `PtrMutExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::is_not_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `MutPtrExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
* `PtrExt::is_not_null` - use `!p.is_null()` instead.
This commit is a second pass stabilization for the `std::comm` module,
performing the following actions:
* The entire `std::comm` module was moved under `std::sync::mpsc`. This movement
reflects that channels are just yet another synchronization primitive, and
they don't necessarily deserve a special place outside of the other
concurrency primitives that the standard library offers.
* The `send` and `recv` methods have all been removed.
* The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`.
This means that all send/receive operations return a `Result` now indicating
whether the operation was successful or not.
* The error type of `send` is now a `SendError` to implement a custom error
message and allow for `unwrap()`. The error type contains an `into_inner`
method to extract the value.
* The error type of `recv` is now `RecvError` for the same reasons as `send`.
* The `TryRecvError` and `TrySendError` types have had public reexports removed
of their variants and the variant names have been tweaked with enum
namespacing rules.
* The `Messages` iterator is renamed to `Iter`
This functionality is now all `#[stable]`:
* `Sender`
* `SyncSender`
* `Receiver`
* `std::sync::mpsc`
* `channel`
* `sync_channel`
* `Iter`
* `Sender::send`
* `Sender::clone`
* `SyncSender::send`
* `SyncSender::try_send`
* `SyncSender::clone`
* `Receiver::recv`
* `Receiver::try_recv`
* `Receiver::iter`
* `SendError`
* `RecvError`
* `TrySendError::{mod, Full, Disconnected}`
* `TryRecvError::{mod, Empty, Disconnected}`
* `SendError::into_inner`
* `TrySendError::into_inner`
This is a breaking change due to the modification of where this module is
located, as well as the changing of the semantics of `send` and `recv`. Most
programs just need to rename imports of `std::comm` to `std::sync::mpsc` and
add calls to `unwrap` after a send or a receive operation.
[breaking-change]
All of the current std::sync primitives have poisoning enable which means that
when a task fails inside of a write-access lock then all future attempts to
acquire the lock will fail. This strategy ensures that stale data whose
invariants are possibly not upheld are never viewed by other tasks to help
propagate unexpected panics (bugs in a program) among tasks.
Currently there is no way to test whether a mutex or rwlock is poisoned. One
method would be to duplicate all the methods with a sister foo_catch function,
for example. This pattern is, however, against our [error guidelines][errors].
As a result, this commit exposes the fact that a task has failed internally
through the return value of a `Result`.
[errors]: https://github.com/rust-lang/rfcs/blob/master/text/0236-error-conventions.md#do-not-provide-both-result-and-fail-variants
All methods now return a `LockResult<T>` or a `TryLockResult<T>` which
communicates whether the lock was poisoned or not. In a `LockResult`, both the
`Ok` and `Err` variants contains the `MutexGuard<T>` that is being returned in
order to allow access to the data if poisoning is not desired. This also means
that the lock is *always* held upon returning from `.lock()`.
A new type, `PoisonError`, was added with one method `into_guard` which can
consume the assertion that a lock is poisoned to gain access to the underlying
data.
This is a breaking change because the signatures of these methods have changed,
often incompatible ways. One major difference is that the `wait` methods on a
condition variable now consume the guard and return it in as a `LockResult` to
indicate whether the lock was poisoned while waiting. Most code can be updated
by calling `.unwrap()` on the return value of `.lock()`.
[breaking-change]
This patch marks `clone` stable, as well as the `Clone` trait, but
leaves `clone_from` unstable. The latter will be decided by the beta.
The patch also marks most manual implementations of `Clone` as stable,
except where the APIs are otherwise deprecated or where there is
uncertainty about providing `Clone`.
r? @alexcrichton
This patch marks `clone` stable, as well as the `Clone` trait, but
leaves `clone_from` unstable. The latter will be decided by the beta.
The patch also marks most manual implementations of `Clone` as stable,
except where the APIs are otherwise deprecated or where there is
uncertainty about providing `Clone`.
This commit is part of a series that introduces a `std::thread` API to
replace `std::task`.
In the new API, `spawn` returns a `JoinGuard`, which by default will
join the spawned thread when dropped. It can also be used to join
explicitly at any time, returning the thread's result. Alternatively,
the spawned thread can be explicitly detached (so no join takes place).
As part of this change, Rust processes now terminate when the main
thread exits, even if other detached threads are still running, moving
Rust closer to standard threading models. This new behavior may break code
that was relying on the previously implicit join-all.
In addition to the above, the new thread API also offers some built-in
support for building blocking abstractions in user space; see the module
doc for details.
Closes#18000
[breaking-change]
This commit performs a second pass stabilization of the `std::default` module.
The module was already marked `#[stable]`, and the inheritance of `#[stable]`
was removed since this attribute was applied. This commit adds the `#[stable]`
attribute to the trait definition and one method name, along with all
implementations found in the standard distribution.
Now that we have an overloaded comparison (`==`) operator, and that `Vec`/`String` deref to `[T]`/`str` on method calls, many `as_slice()`/`as_mut_slice()`/`to_string()` calls have become redundant. This patch removes them. These were the most common patterns:
- `assert_eq(test_output.as_slice(), "ground truth")` -> `assert_eq(test_output, "ground truth")`
- `assert_eq(test_output, "ground truth".to_string())` -> `assert_eq(test_output, "ground truth")`
- `vec.as_mut_slice().sort()` -> `vec.sort()`
- `vec.as_slice().slice(from, to)` -> `vec.slice(from_to)`
---
Note that e.g. `a_string.push_str(b_string.as_slice())` has been left untouched in this PR, since we first need to settle down whether we want to favor the `&*b_string` or the `b_string[]` notation.
This is rebased on top of #19167
cc @alexcrichton @aturon
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::* and Result::*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
Adds the ability to use a custom allocator heap by passing either --cfg
external_crate and --extern external=<allocator_crate_name> or --cfg
external_funcs and defining the allocator functions prefixed by 'rust_'
somewhere.
This is useful for many reasons including OS/embedded development, and
allocator development and testing.
