/# This is a combination of 16 commits.
/# The first commit's message is:
allow RUST_BACKTRACE=disabled to act as if unset
When RUST_BACKTRACE is set to "disabled" then this acts as if the env.
var is unset.
/# This is the 2nd commit message:
case insensitive "DiSaBLeD" RUST_BACKTRACE value
previously it expected a lowercase "disabled" to treat the env. var as
unset
/# This is the 3rd commit message:
RUST_BACKTRACE=0 acts as if unset
previously RUST_BACKTRACE=disabled was doing the same thing
/# This is the 4th commit message:
RUST_BACKTRACE=0|n|no|off acts as if unset
previously only RUST_BACKTRACE=0 acted as if RUST_BACKTRACE was unset
Now added more options (case-insensitive): 'n','no' and 'off'
eg. RUST_BACKTRACE=oFF
/# This is the 5th commit message:
DRY on the value of 2
DRY=don't repeat yourself
Because having to remember to keep the two places of '2' in sync is not
ideal, even though this is a simple enough case.
/# This is the 6th commit message:
Revert "DRY on the value of 2"
This reverts commit 95a0479d5cf72a2b2d9d21ec0bed2823ed213fef.
Nevermind this DRY on 2, because we already have a RY on 1,
besides the code is less readable this way...
/# This is the 7th commit message:
attempt to document unsetting RUST_BACKTRACE
/# This is the 8th commit message:
curb allocations when checking for RUST_BACKTRACE
this means we don't check for case-insensitivity anymore
/# This is the 9th commit message:
as decided, RUST_BACKTRACE=0 turns off backtrace
/# This is the 10th commit message:
RUST_TEST_NOCAPTURE=0 acts as if unset
(that is, capture is on)
Any other value acts as if nocapture is enabled (that is, capture is off)
/# This is the 11th commit message:
update other RUST_TEST_NOCAPTURE occurrences
apparently only one place needs updating
/# This is the 12th commit message:
update RUST_BACKTRACE in man page
/# This is the 13th commit message:
handle an occurrence of RUST_BACKTRACE
/# This is the 14th commit message:
ensure consistency with new rules for backtrace
/# This is the 15th commit message:
a more concise comment for RUST_TEST_NOCAPTURE
/# This is the 16th commit message:
update RUST_TEST_NOCAPTURE in man page
Automated conversion using the untry tool [1] and the following command:
```
$ find -name '*.rs' -type f | xargs untry
```
at the root of the Rust repo.
[1]: https://github.com/japaric/untry
Refactor call & function handling in trans, enable MIR bootstrap.
Non-Rust and Rust ABIs were combined into a common codepath, which means:
* The ugly `__rust_abi` "clown shoes" shim for C->Rust FFI is gone, fixes#10116.
* Methods, *including virtual ones* support non-Rust ABIs, closes#30235.
* Non-Rust ABIs also pass fat pointers in two arguments; the result should be identical.
* Zero-sized types are never passed as arguments; again, behavior shouldn't change.
Additionally, MIR support for calling intrinsics (through old trans) was implemented.
Alongside assorted fixes, it enabled MIR to launch 🚀 and do a *complete* bootstrap.
To try it yourself, `./configure --enable-orbit` *or* `make RUSTFLAGS="-Z orbit"`.
Original issue: https://github.com/rust-lang/rust/issues/21195
Relevant PR: https://github.com/rust-lang/rust/pull/30778
Prior to this commit, if a compiletest testcase included the text
"HELP:" or "NOTE:" (note the colons), then it would indicate to the
compiletest suite that we should verify "help" and "note" expected
messages.
This commit updates this check to also check "HELP" and "NOTE" (not the
absense of colons) so that we always verify "help" and "note" expected
messages.
Shorter output for `rustc --test` binaries.
Until now, a program created with `rustc --test` prints at least one line per test. This can be very verbose, especially with [data-driven tests](https://internals.rust-lang.org/t/test-and-external-test-harnesses/3145) when hundreds or thousands of tests is not rare.
This changes the default output to one character per test (except metrics and benchmarks results which have additional data to show):
```
Running target/debug/wpt-75c594dc1e6e6187
running 314 tests
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..
test result: ok. 314 passed; 0 failed; 0 ignored; 0 measured
```
<s>The previous behavior is available by passing `--verbose` to the test program. Maybe `cargo test --verbose` could be changed to do that?</s> **Edit:** the default is now unchanged, `-q` or `--quiet` enables the new output.
A program created with `rustc --test` prints at least one line per test.
This can be very verbose, especially with [data-driven tests](
https://internals.rust-lang.org/t/test-and-external-test-harnesses/3145)
when hundreds or thousands of tests is not rare.
This adds a `-q` or `--quiet` option that changes the output
to one character instead of one line per test
(except metrics and benchmarks results which have additional data to
show):
```
Running target/debug/wpt-75c594dc1e6e6187
running 314 tests
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..
test result: ok. 314 passed; 0 failed; 0 ignored; 0 measured
```
This is a breaking change since the `test::TestOpts` struct
now has one more field.
Removes all unstable and deprecated APIs prior to the 1.8 release. All APIs that
are deprecated in the 1.8 release are sticking around for the rest of this
cycle.
Some notable changes are:
* The `dynamic_lib` module was moved into `rustc_back` as the compiler still
relies on a few bits and pieces.
* The `DebugTuple` formatter now special-cases an empty struct name with only
one field to append a trailing comma.
a test file may specify `// revisions: foo bar baz`
headers and expected errors may be made specific to a revision
by writing `//[foo] header` or `//[foo]~ ERROR`
around a set of paths called `TestPaths`
This commit is not quite standalone; it basically contains all the
borrowing plumbing bits, the interesting stuff comes in the next commit.
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
This commit is the standard API stabilization commit for the 1.6 release cycle.
The list of issues and APIs below have all been through their cycle-long FCP and
the libs team decisions are listed below
Stabilized APIs
* `Read::read_exact`
* `ErrorKind::UnexpectedEof` (renamed from `UnexpectedEOF`)
* libcore -- this was a bit of a nuanced stabilization, the crate itself is now
marked as `#[stable]` and the methods appearing via traits for primitives like
`char` and `str` are now also marked as stable. Note that the extension traits
themeselves are marked as unstable as they're imported via the prelude. The
`try!` macro was also moved from the standard library into libcore to have the
same interface. Otherwise the functions all have copied stability from the
standard library now.
* The `#![no_std]` attribute
* `fs::DirBuilder`
* `fs::DirBuilder::new`
* `fs::DirBuilder::recursive`
* `fs::DirBuilder::create`
* `os::unix::fs::DirBuilderExt`
* `os::unix::fs::DirBuilderExt::mode`
* `vec::Drain`
* `vec::Vec::drain`
* `string::Drain`
* `string::String::drain`
* `vec_deque::Drain`
* `vec_deque::VecDeque::drain`
* `collections::hash_map::Drain`
* `collections::hash_map::HashMap::drain`
* `collections::hash_set::Drain`
* `collections::hash_set::HashSet::drain`
* `collections::binary_heap::Drain`
* `collections::binary_heap::BinaryHeap::drain`
* `Vec::extend_from_slice` (renamed from `push_all`)
* `Mutex::get_mut`
* `Mutex::into_inner`
* `RwLock::get_mut`
* `RwLock::into_inner`
* `Iterator::min_by_key` (renamed from `min_by`)
* `Iterator::max_by_key` (renamed from `max_by`)
Deprecated APIs
* `ErrorKind::UnexpectedEOF` (renamed to `UnexpectedEof`)
* `OsString::from_bytes`
* `OsStr::to_cstring`
* `OsStr::to_bytes`
* `fs::walk_dir` and `fs::WalkDir`
* `path::Components::peek`
* `slice::bytes::MutableByteVector`
* `slice::bytes::copy_memory`
* `Vec::push_all` (renamed to `extend_from_slice`)
* `Duration::span`
* `IpAddr`
* `SocketAddr::ip`
* `Read::tee`
* `io::Tee`
* `Write::broadcast`
* `io::Broadcast`
* `Iterator::min_by` (renamed to `min_by_key`)
* `Iterator::max_by` (renamed to `max_by_key`)
* `net::lookup_addr`
New APIs (still unstable)
* `<[T]>::sort_by_key` (added to mirror `min_by_key`)
Closes#27585Closes#27704Closes#27707Closes#27710Closes#27711Closes#27727Closes#27740Closes#27744Closes#27799Closes#27801
cc #27801 (doesn't close as `Chars` is still unstable)
Closes#28968
