[RFC 2011] Minimal initial implementation
Tracking issue: #44838
Third step of #96496
Implementation has ~290 LOC with the bare minimum to be in a functional state. Currently only searches for binary operations to mimic what `assert_eq!` and `assert_ne!` already do.
r? `@oli-obk`
Remove `rustc_deprecated` diagnostics
Follow-up on #95960. The diagnostics will remain until the next bootstrap, at which point people will have had six weeks to adjust.
``@rustbot`` label +A-diagnostics
r? ``@compiler-errors``
Rename rustc_serialize::opaque::Encoder as MemEncoder.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
r? ```@bjorn3```
lint: add diagnostic translation migration lints
Introduce allow-by-default lints for checking whether diagnostics are written in
`SessionDiagnostic` or `AddSubdiagnostic` impls and whether diagnostics are translatable. These lints can be denied for modules once they are fully migrated to impls and translation.
These lints are intended to be temporary - once all diagnostics have been changed then we can just change the APIs we have and that will enforce these constraints thereafter.
r? `````@oli-obk`````
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
(This was previously merged as commit 5 in #94732 and then was reverted
in #97905 because of a perf regression caused by commit 4 in #94732.)
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit adds a new unstable attribute, `#[doc(tuple_varadic)]`, that
shows a 1-tuple as `(T, ...)` instead of just `(T,)`, and links to a section
in the tuple primitive docs that talks about these.
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
There are two impls of the `Encoder` trait: `opaque::Encoder` and
`opaque::FileEncoder`. The former encodes into memory and is infallible, the
latter writes to file and is fallible.
Currently, standard `Result`/`?`/`unwrap` error handling is used, but this is a
bit verbose and has non-trivial cost, which is annoying given how rare failures
are (especially in the infallible `opaque::Encoder` case).
This commit changes how `Encoder` fallibility is handled. All the `emit_*`
methods are now infallible. `opaque::Encoder` requires no great changes for
this. `opaque::FileEncoder` now implements a delayed error handling strategy.
If a failure occurs, it records this via the `res` field, and all subsequent
encoding operations are skipped if `res` indicates an error has occurred. Once
encoding is complete, the new `finish` method is called, which returns a
`Result`. In other words, there is now a single `Result`-producing method
instead of many of them.
This has very little effect on how any file errors are reported if
`opaque::FileEncoder` has any failures.
Much of this commit is boring mechanical changes, removing `Result` return
values and `?` or `unwrap` from expressions. The more interesting parts are as
follows.
- serialize.rs: The `Encoder` trait gains an `Ok` associated type. The
`into_inner` method is changed into `finish`, which returns
`Result<Vec<u8>, !>`.
- opaque.rs: The `FileEncoder` adopts the delayed error handling
strategy. Its `Ok` type is a `usize`, returning the number of bytes
written, replacing previous uses of `FileEncoder::position`.
- Various methods that take an encoder now consume it, rather than being
passed a mutable reference, e.g. `serialize_query_result_cache`.
Add support for emitting functions with `coldcc` to LLVM
The eventual goal is to try using this for things like the internal panicking stuff, to see whether it helps.
Lazify `SourceFile::lines`.
`SourceFile::lines` is a big part of metadata. It's stored in a compressed form
(a difference list) to save disk space. Decoding it is a big fraction of
compile time for very small crates/programs.
This commit introduces a new type `SourceFileLines` which has a `Lines`
form and a `Diffs` form. The latter is used when the metadata is first
read, and it is only decoded into the `Lines` form when line data is
actually needed. This avoids the decoding cost for many files,
especially in `std`. It's a performance win of up to 15% for tiny
crates/programs where metadata decoding is a high part of compilation
costs.
A `RefCell` is needed because the methods that access lines data (which can
trigger decoding) take `&self` rather than `&mut self`. To allow for this,
`SourceFile::lines` now takes a `FnMut` that operates on the lines slice rather
than returning the lines slice.
r? `@Mark-Simulacrum`
`SourceFile::lines` is a big part of metadata. It's stored in a compressed form
(a difference list) to save disk space. Decoding it is a big fraction of
compile time for very small crates/programs.
This commit introduces a new type `SourceFileLines` which has a `Lines`
form and a `Diffs` form. The latter is used when the metadata is first
read, and it is only decoded into the `Lines` form when line data is
actually needed. This avoids the decoding cost for many files,
especially in `std`. It's a performance win of up to 15% for tiny
crates/programs where metadata decoding is a high part of compilation
costs.
A `Lock` is needed because the methods that access lines data (which can
trigger decoding) take `&self` rather than `&mut self`. To allow for this,
`SourceFile::lines` now takes a `FnMut` that operates on the lines slice rather
than returning the lines slice.
This commit adds an alternative content boxing syntax,
and uses it inside alloc.
The usage inside the very performance relevant code in
liballoc is the only remaining relevant usage of box syntax
in the compiler (outside of tests, which are comparatively
easy to port).
box syntax was originally designed to be used by all Rust
developers. This introduces a replacement syntax more tailored
to only being used inside the Rust compiler, and with it,
lays the groundwork for eventually removing box syntax.
Replace `#[default_method_body_is_const]` with `#[const_trait]`
pulled out of #96077
related issues: #67792 and #92158
cc `@fee1-dead`
This is groundwork to only allowing `impl const Trait` for traits that are marked with `#[const_trait]`. This is necessary to prevent adding a new default method from becoming a breaking change (as it could be a non-const fn).
Add support for embedding pretty printers via `#[debugger_visualizer]` attribute
Initial support for [RFC 3191](https://github.com/rust-lang/rfcs/pull/3191) in PR https://github.com/rust-lang/rust/pull/91779 was scoped to supporting embedding NatVis files using a new attribute. This PR implements the pretty printer support as stated in the RFC mentioned above.
This change includes embedding pretty printers in the `.debug_gdb_scripts` just as the pretty printers for rustc are embedded today. Also added additional tests for embedded pretty printers. Additionally cleaned up error checking so all error checking is done up front regardless of the current target.
RFC: https://github.com/rust-lang/rfcs/pull/3191
`imported_source_files` adjusts lots of file positions, and then calls
`new_imported_source_file`, which then adjust them all again. This
commit combines the two adjustments into one, for a small perf win.
Ensure all error checking for `#[debugger_visualizer]` is done up front and not when the `debugger_visualizer` query is run.
Clean up potential ODR violations when embedding pretty printers into the `__rustc_debug_gdb_scripts_section__` section.
Respond to PR comments and update documentation.
Like we have `add`/`sub` which are the `usize` version of `offset`, this adds the `usize` equivalent of `offset_from`. Like how `.add(d)` replaced a whole bunch of `.offset(d as isize)`, you can see from the changes here that it's fairly common that code actually knows the order between the pointers and *wants* a `usize`, not an `isize`.
As a bonus, this can do `sub nuw`+`udiv exact`, rather than `sub`+`sdiv exact`, which can be optimized slightly better because it doesn't have to worry about negatives. That's why the slice iterators weren't using `offset_from`, though I haven't updated that code in this PR because slices are so perf-critical that I'll do it as its own change.
This is an intrinsic, like `offset_from`, so that it can eventually be allowed in CTFE. It also allows checking the extra safety condition -- see the test confirming that CTFE catches it if you pass the pointers in the wrong order.
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
