Hide irrelevant lines in suggestions to allow for suggestions that are far from each other to be shown
This is an attempt to fix suggestions one part of which is 6 lines or more far from the first. I've noticed "the problem" (of not showing some parts of the suggestion) here: https://github.com/rust-lang/rust/pull/97759#discussion_r889689230.
I'm not sure about the implementation (this big closure is just bad and makes already complicated code even more so), but I want to at least discuss the result.
Here is an example of how this changes the output:
Before:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
5 |
6 |
7 |
8 |
...
```
After:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
...
31|
32~ } };
|
```
r? `@estebank`
`@rustbot` label +A-diagnostics +A-suggestion-diagnostics
Previously we only show at most 6 lines of suggestions and, if the
suggestions are more than 6 lines apart, we've just showed ... at the
end. This is probably fine, but quite confusing in my opinion.
This commit is an attempt to show ... in places where there is nothing
to suggest instead, for example:
Before:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
5 |
6 |
7 |
8 |
...
```
After:
```text
help: consider enclosing expression in a block
|
3 ~ 'l: { match () { () => break 'l,
4 |
...
31|
32~ } };
|
```
Support lint expectations for `--force-warn` lints (RFC 2383)
Rustc has a `--force-warn` flag, which overrides lint level attributes and forces the diagnostics to always be warn. This means, that for lint expectations, the diagnostic can't be suppressed as usual. This also means that the expectation would not be fulfilled, even if a lint had been triggered in the expected scope.
This PR now also tracks the expectation ID in the `ForceWarn` level. I've also made some minor adjustments, to possibly catch more bugs and make the whole implementation more robust.
This will probably conflict with https://github.com/rust-lang/rust/pull/97718. That PR should ideally be reviewed and merged first. The conflict itself will be trivial to fix.
---
r? `@wesleywiser`
cc: `@flip1995` since you've helped with the initial review and also discussed this topic with me. 🙃
Follow-up of: https://github.com/rust-lang/rust/pull/87835
Issue: https://github.com/rust-lang/rust/issues/85549
Yeah, and that's it.
lint: add diagnostic translation migration lints
Introduce allow-by-default lints for checking whether diagnostics are written in
`SessionDiagnostic` or `AddSubdiagnostic` impls and whether diagnostics are translatable. These lints can be denied for modules once they are fully migrated to impls and translation.
These lints are intended to be temporary - once all diagnostics have been changed then we can just change the APIs we have and that will enforce these constraints thereafter.
r? `````@oli-obk`````
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
Fix `delayed_good_path_bug` ice for expected diagnostics (RFC 2383)
Fixes a small ICE with the `delayed_good_path_bug` check.
---
r? ``@wesleywiser``
cc: ``@eddyb`` this might be interesting, since you've added a `FIXME` comment above the modified check which kind of discusses a case like this
closes: https://github.com/rust-lang/rust/issues/95540
cc: https://github.com/rust-lang/rust/issues/85549
Remove migrate borrowck mode
Closes#58781Closes#43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
Replace `&Vec<_>`s with `&[_]`s
It's generally preferable to use `&[_]` since it's one less indirection and it can be created from types other that `Vec`.
I've left `&Vec` in some locals where it doesn't really matter, in cases where `TypeFoldable` is expected (`TypeFoldable: Clone` so slice can't implement it) and in cases where it's `&TypeAliasThatIsActiallyVec`. Nothing important, really, I was just a little annoyed by `visit_generic_param_vec` :D
r? `@compiler-errors`
errors: simplify referring to fluent attributes
To render the message of a Fluent attribute, the identifier of the Fluent message must be known. `DiagnosticMessage::FluentIdentifier` contains both the message's identifier and optionally the identifier of an attribute. Generated constants for each attribute would therefore need to be named uniquely (amongst all error messages) or be able to refer to only the attribute identifier which will be combined with a message identifier later. In this commit, the latter strategy is implemented as part of the `Diagnostic` type's functions for adding subdiagnostics of various kinds.
r? `@oli-obk`
To render the message of a Fluent attribute, the identifier of the
Fluent message must be known. `DiagnosticMessage::FluentIdentifier`
contains both the message's identifier and optionally the identifier of
an attribute. Generated constants for each attribute would therefore
need to be named uniquely (amongst all error messages) or be able to
refer to only the attribute identifier which will be combined with a
message identifier later. In this commit, the latter strategy is
implemented as part of the `Diagnostic` type's functions for adding
subdiagnostics of various kinds.
Signed-off-by: David Wood <david.wood@huawei.com>
Adds a new `fluent_messages` macro which performs compile-time
validation of the compiler's Fluent resources (i.e. that the resources
parse and don't multiply define the same messages) and generates
constants that make using those messages in diagnostics more ergonomic.
For example, given the following invocation of the macro..
```ignore (rust)
fluent_messages! {
typeck => "./typeck.ftl",
}
```
..where `typeck.ftl` has the following contents..
```fluent
typeck-field-multiply-specified-in-initializer =
field `{$ident}` specified more than once
.label = used more than once
.label-previous-use = first use of `{$ident}`
```
...then the macro parse the Fluent resource, emitting a diagnostic if it
fails to do so, and will generate the following code:
```ignore (rust)
pub static DEFAULT_LOCALE_RESOURCES: &'static [&'static str] = &[
include_str!("./typeck.ftl"),
];
mod fluent_generated {
mod typeck {
pub const field_multiply_specified_in_initializer: DiagnosticMessage =
DiagnosticMessage::fluent("typeck-field-multiply-specified-in-initializer");
pub const field_multiply_specified_in_initializer_label_previous_use: DiagnosticMessage =
DiagnosticMessage::fluent_attr(
"typeck-field-multiply-specified-in-initializer",
"previous-use-label"
);
}
}
```
When emitting a diagnostic, the generated constants can be used as
follows:
```ignore (rust)
let mut err = sess.struct_span_err(
span,
fluent::typeck::field_multiply_specified_in_initializer
);
err.span_default_label(span);
err.span_label(
previous_use_span,
fluent::typeck::field_multiply_specified_in_initializer_label_previous_use
);
err.emit();
```
Signed-off-by: David Wood <david.wood@huawei.com>
Manual implementors of translatable diagnostics will need to call
`set_arg`, not just the derive, so make this function a bit more
ergonomic by taking `IntoDiagnosticArg` rather than
`DiagnosticArgValue`.
Signed-off-by: David Wood <david.wood@huawei.com>
Add a new derive, `#[derive(SessionSubdiagnostic)]`, which enables
deriving structs for labels, notes, helps and suggestions.
Signed-off-by: David Wood <david.wood@huawei.com>
Change `span_suggestion` (and variants) to take `impl ToString` rather
than `String` for the suggested code, as this simplifies the
requirements on the diagnostic derive.
Signed-off-by: David Wood <david.wood@huawei.com>
Since Cargo wants to do its own fatal error handling for unused
dependencies, add the option `--json unused-externs-silent` which
has the original behaviour of not indicating non-zero exit status for
`deny`/`forbid`-level unused dependencies.
Remove `--extern-location` and all associated code
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
Loading the fallback bundle in compilation sessions that won't go on to
emit any errors unnecessarily degrades compile time performance, so
lazily create the Fluent bundle when it is first required.
Signed-off-by: David Wood <david.wood@huawei.com>
Add an option for enabling and disabling Fluent's directionality
isolation markers in output. Disabled by default as these can render in
some terminals and applications.
Signed-off-by: David Wood <david.wood@huawei.com>
Extends support for generating `DiagnosticMessage::FluentIdentifier`
messages from `SessionDiagnostic` derive to `#[label]`.
Signed-off-by: David Wood <david.wood@huawei.com>
